ZSW-30-125Mobile Phone

CERTIFICADO DE GARANTIA No. ESN / IMEI:_____________________________________________________________ MODELO: _________________________________________________________________ CONSUMIDOR: NOMBRE:__________________________________________________________________ DIRECCIÓN:________________________________________________________________ CIUDAD: __________________________________ ESTADO: _______________________ CÓDIGO POSTAL: __________________________ TELÉFONO:_____________________ FECHA DE COMPRA: ________________________________________________________ DISTRIBUIDOR: NOMBRE: __________________________________________________________________ N º DE FACTURA: __________________________ DATOS DE EDICIÓN: _____________ CIUDAD: __________________________________ ESTADO:________________________ 1 Table of Contents 1. Foreword ....................................................................................... 32 2. Getting to know your touch phone...............................................35 3. Starting up your device..................................................................37 4. Introduce the basic phone function .............................................39 5. Technical Specifications ...............................................................46 6. FCC Cautions................................................................................48 Google, Android, Google Play, YouTube, Gmail, Google Drive, Chrome and other marks are trademarks of Google LLC. 2 1. FOREWORD Safety In order to ensure the phone is used safely and correctly, please read the precautions below carefully before use. 1.1 General precaution •Your phone is only suitable for the battery and charger approved by our company or else it may cause the battery to leak, overheat, explode or even catch fire. •Do not knock, vibrate or throw the phone heavily to avoid malfunction, fire, overheating, explosion or fire. •It may burn the skin if liquid in the battery leaks onto skin or clothes. If this happens please flush with plenty of clean water immediately and go to a hospital at once. •Please keep the battery away from fire to avoid fire and explosion if the battery leaks or emits a strange smell. •Do not place expose the battery to moisture or it may cause overheating, fumes and corrosion. •Do not use or place the battery under direct sunlight, or in hot places, it may cause leakage and overheating, thus reducing performance and shortening the lifespan. •Do not charge the battery for over 24 hours continuously. •Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss. 1.2 Precaution for the use of charger •Do not cause short circuit to the charger, or it may cause electric shock, fumes and damage to the charger. 3 •Do not use the charger if the power wire is broken, or it may cause fire and electric shock. •Please remove accumulated dust on the power plug. •Do not put water containers next to the power supply to avoid overheating, fire, electric shock and malfunction in case they come into contact. •Do not disassemble or tamper with the charger or it may cause personal injury, electric shock, fire and the damage of the charger. •Do not use the charger in places of high humidity, like bathrooms, or it may cause electric shock, fire and damage of charger. •Do not touch the charger, power cord or power plug with wet hands or it can cause electric shock. •Do not put heavy objects on the power cord or change the power cord or it may cause electric shock and fire. •Please unplug the power socket before cleaning and maintenance. •Please hold the charger to unplug the socket as pulling the power cord may damage the power wire and cause electric shock and fire. 1.3 Cleaning and maintenance •As the phone, battery and charger are not waterproof, do not use them in places of high humidity and avoid them being wet by rain. •Please clean the battery and charger with a soft dry cloth. •Never use alcohol, thinner or solutions, like benzene, to wipe the phone. •Dirty sockets can cause poor contact and power down, and even make recharging unavailable. So, please clean them periodically. 4 1.4 Common Precaution Mobile Phone: •Please use the phone in an environment with temperature between -20°C- 45°C and humidity of <75%. •Please use the phone far away from regular telephones, TV sets, radio sets and office automation equipment, to avoid affecting the normal use of these equipment and mobile phone. Charger: •Do not charge under following conditions: -- Places with direct sunlight -- Places with ambient temperature less than 0°C or over 40°C, wet or dusty places with strong vibrations (it may cause malfunction) -- Places near electrical appliances (it may affect the image and sound) like TV set, radio, etc. -- Adapter shall be installed near the equipment and shall be easily accessible. The plug considered as disconnect device of adapter 5 2. GETTING TO KNOW YOUR TOUCH PHONE The number of icons in the main desk or the main menu will be according the quantity of applications installed on your device. 1. Earphone connector (Jack 3.5mm) 2. USB connector 3. Receiver 4. Front camera 5. LCD Screen 6. Navigation buttons 7. Microphone 8. Speaker 9. Turn on/off button 10. Volume button 11. Triple Back camera 12. Flash LED 6 Note: The OS on this device has been designed to run using a low RAM configuration, therefore we strongly recommend not to download and run large applications nor download too much applications and keep them running simultaneously to avoid unstable performance of the applications and/or the device. 7 3. STARTING UP YOUR DEVICE To install the SIM card •Locate the SIM card slot, and then insert the SIM card with its gold contacts and its cut-off corner as shown in the diagram. (Always power off the device before inserting the SIM) •Slide the SIM card completely into the slot. To install a memory card To have additional storage for your images, videos, music a…

Text truncated - open the document above for the full version.

b mobile HK Limited 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – EquipmentType Company name: b mobile HK Limited Address: Flat 18; 14/F Block 1; Golden Industrial Building;16-26 Kwai Tak Street; Kwai Chung; New Territories; Hong Kong, China Product Name: Mobile phone FCC ID: ZSW-30-125 Model(s): BL63 2.911(d)(5)(i) EquipmentType We, [b mobile HK Limited] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Carlos Lopez Date: 3/31/2023 Title and Company name: Manager / b mobile HK Limited NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

b mobile HK Limited 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: b mobile HK Limited Address: Flat 18; 14/F Block 1; Golden Industrial Building;16-26 Kwai Tak Street; Kwai Chung; New Territories; Hong Kong, China Product Name: Mobile phone FCC ID: ZSW-30-125 Model(s): BL63 2.911(d)(5)(ii) Applicant filing We, [b mobile HK Limited] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 ,established pursuant to §1.50002 of this chapter,as an entity producing coveredcommunications equipment. Yours sincerely, Name: Carlos Lopez Date: 3/31/2023 Title and Company name: Manager / b mobile HK Limited NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

THREE STONES MEDIA LLC U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: 03-31-2023 Ref: Attestation Statement – Part2.911(d)(7) filing FCC ID:ZSW-30-125 b mobile HK Limited (“the applicant”) certifies that, as of the date of the filing of the application, THREE STONES MEDIA LLC(“the agent”) is our designated U.S. agent for service of process for the abovereference FCC ID. The applicant accepts to maintain an agent for service of process in the United States forno less than one year after either the grantee has permanently terminated all marketing and importation of theapplicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicialproceeding involving the equipment, whichever is later. The applicant further acknowledges it is ourresponsibility to inform the FCC whenever the agent information changes. THREE STONES MEDIA LLC ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: THREE STONES MEDIA LLC FRN: 0033401761 GC: 2A99E Address: 1200 Broadway St. APT 329, Los Angeles, CA90015 Signature: Contact Person: Sijie Zhang Tel: +1 267 909 3692 Email: [email protected] Applicant Company Name: b mobile HK Limited Address: Flat 18; 14/F Block 1; Golden Industrial Building;16-26 Kwai Tak Street; Kwai Chung; New Territories; Hong Kong, China Signature: Contact Person: Carlos Lopez Tel:852-2728 7886 Email: [email protected]

b mobile HK Limited Agent Authorization Letter (2023-03-31) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park Sanwei, Xixiang, Bao'an District, Shenzhen, Guangdong, China Alex.li [email protected] to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Carlos Lopez / Manager Date/City: 2023-03-31 / HONG KONG Phone: 852-2728 7886 Fax: 852-2728 0468 E-mail: [email protected]

b mobile HK Limited Long Term Confidentiality Request Letter (2023-03-31) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR Product: Mobile phone Model No.: BL63 FCC ID: ZSW-30-125 To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the  Schematic Diagram  Block Diagram  Operational Description  Part List / BOM List / PCB Layout  Tune-up Procedure Required to be submitted with this application be permanently withheld from public review. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Please contact me if there is any information you may need. Sincerely, Carlos Lopez / Manager Date/City: 2023-03-31 / HONG KONG Phone: 852-2728 7886 Fax: 852-2728 0468 E-mail: [email protected]

ATTACHMENT PHOTOGRAPHS OF EUT Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7 Photo 8 Photo 9 Photo 10

ATTACHMENT PHOTOGRAPHS OF EUT Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6 Photo 7 Photo 8 Photo 9 Photo 10 Photo 11 Photo 12 Photo 13 Photo 14 GSM/WCDMA/LTE Main ANT LTE AUX ANT Photo 15 BT/WIFI ANT

Page 1 of 195 Report No.: S23030102803001 FCC SAR EVALUATION REPORT In accordance with the requirements of FCC 47 CFR Part 2(2.1093), ANSI/IEEE C95.1-1992 and IEEE Std 1528-2013 Product Name： Mobile phone Brand Name： Bmobile Model Name： BL63 Family Model： N/A Report No.： S23030102803001 FCC ID： ZSW-30-125 Prepared for b mobile HK Limited Flat 18; 14/F Block 1; Golden Industrial Building;16-26 Kwai Tak Street; Kwai Chung; New Territories; Hong Kong, China Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street, Bao'an District, Shenzhen 518126 P.R.China. Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090 Website: http://www.ntek.org.cn Page 2 of 195 Report No.: S23030102803001 TEST RESULT CERTIFICATION Applicant’s name ................. : b mobile HK Limited Address .................................. : Flat 18; 14/F Block 1; Golden Industrial Building;16-26 Kwai Tak Street; Kwai Chung; New Territories; Hong Kong, China Manufacturer's Name .......... : b mobile HK Limited Address .................................. : Flat 18; 14/F Block 1; Golden Industrial Building;16-26 Kwai Tak Street; Kwai Chung; New Territories; Hong Kong, China Product description Product name ........................ : Mobile phone Brand Name ......................... : Bmobile Model and/or type reference .............................. : BL63 Family Model ......................... : N/A Standards ............................. : FCC 47 CFR Part 2(2.1093) ANSI/IEEE C95.1-1992 IEEE Std 1528-2013 Published RF exposure KDB procedures This device described above has been tested by Shenzhen NTEK. In accordance with the measurement methods and procedures specified in IEEE Std 1528-2013 and KDB 865664 D01. Testing has shown that this device is capable of compliance with localized specific absorption rate (SAR) specified in FCC 47 CFR Part 2(2.1093) and ANSI/IEEE C95.1-1992. The test results in this report apply only to the tested sample of the stated device/equipment. Other similar device/equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. This report shall not be reproduced except in full, without the written approval of Shenzhen NTEK, this document may be altered or revised by Shenzhen NTEK, personal only, and shall be noted in the revision of the document. Test Sample Number ............................. S230301028003 Date of Test Date (s) of performance of tests .............. : Mar. 06, 2023 ~ Mar. 14, 2023 Date of Issue ........................................... : Mar. 29, 2023 Test Result ............................................... : Pass Prepared By (Test Engineer) : (Jacob Chen) Approved By (Lab Manager) : (Alex Li) Page 3 of 195 Report No.: S23030102803001 ※ ※ Revision History ※ ※ REV. DESCRIPTION ISSUED DATE REMARK Rev.1.0 Initial Test Report Release Mar. 29, 2023 Jacob Chen Page 4 of 195 Report No.: S23030102803001 TABLE OF CONTENTS 1. General Information ............................................................................................ 6 1.1. RF exposure limits .................................................................................... 6 1.2. Statement of Compliance ........................................................................ 7 1.3. EUT Description ....................................................................................... 7 1.4. Test specification(s) .................................................................................. 8 1.5. Ambient Condition ................................................................................... 9 2. SAR Measurement System ................................................................................. 10 2.1. SATIMO SAR Measurement Set-up Diagram .......................................... 10 2.2. Robot ..................................................................................................... 11 2.3. E-Field Probe .......................................................................................... 12 2.3.1. E-Field Probe Calibration ................................................................. 12 2.4. SAM phantoms ...................................................................................... 13 2.4.1. Technical Data .................................................................................. 14 2.5. Device Holder ........................................................................................ 15 2.6. Test Equipment List ................................................................................ 16 3. SAR Measurement Procedures .......................................................................... 18 3.1. Power Reference ................................................................................... 18 3.2. Area scan & Zoom scan .......................................................................... 18 3.3. Description of interpolation/extrapolation scheme .............................. 20 3.4. Volumetric Scan ..................................................................................... 20 3.5. Power Drift ............................................................................................ 20 4. System Verification Procedure .......................................................................... 21 4.1. Tissue Verification ................................................................................. 21 4.1.1. Tissue Dielectric Parameter Check Results ...................................... 22 4.2. System Verification Procedure .............................................................. 23 4.2.1. System Verification Results .............................................................. 24 5. SAR Measurement variability and uncertainty .................................................. 25 5.1. SAR measurement variability ................................................................. 25 5.2. SAR measurement unc…

Text truncated - open the document above for the full version.

Page 151 of 195 Report No.: S23030102803001 Page 152 of 195 Report No.: S23030102803001 Page 153 of 195 Report No.: S23030102803001 Page 154 of 195 Report No.: S23030102803001 Page 155 of 195 Report No.: S23030102803001 Page 156 of 195 Report No.: S23030102803001 Page 157 of 195 Report No.: S23030102803001 Page 158 of 195 Report No.: S23030102803001 Page 159 of 195 Report No.: S23030102803001 Page 160 of 195 Report No.: S23030102803001 Page 161 of 195 Report No.: S23030102803001 Page 162 of 195 Report No.: S23030102803001 Page 163 of 195 Report No.: S23030102803001 Page 164 of 195 Report No.: S23030102803001 Page 165 of 195 Report No.: S23030102803001 Page 166 of 195 Report No.: S23030102803001 Page 167 of 195 Report No.: S23030102803001 Page 168 of 195 Report No.: S23030102803001 Page 169 of 195 Report No.: S23030102803001 Page 170 of 195 Report No.: S23030102803001 Page 171 of 195 Report No.: S23030102803001 Page 172 of 195 Report No.: S23030102803001 Page 173 of 195 Report No.: S23030102803001 Page 174 of 195 Report No.: S23030102803001 Page 175 of 195 Report No.: S23030102803001 Page 176 of 195 Report No.: S23030102803001 Page 177 of 195 Report No.: S23030102803001 Page 178 of 195 Report No.: S23030102803001 Page 179 of 195 Report No.: S23030102803001 Page 180 of 195 Report No.: S23030102803001 Page 181 of 195 Report No.: S23030102803001 Page 182 of 195 Report No.: S23030102803001 Page 183 of 195 Report No.: S23030102803001 Page 184 of 195 Report No.: S23030102803001 Page 185 of 195 Report No.: S23030102803001 Page 186 of 195 Report No.: S23030102803001 Page 187 of 195 Report No.: S23030102803001 Page 188 of 195 Report No.: S23030102803001 Page 189 of 195 Report No.: S23030102803001 Page 190 of 195 Report No.: S23030102803001 Page 191 of 195 Report No.: S23030102803001 <Justification of the extended calibration> If dipoles are verified in return loss (<-20dB, within 20% of prior calibration for below 3GHz, and <-8dB, within 20% of prior calibration for 5GHz to 6GHz), and in impedance (within 5 ohm of prior calibration), the annual calibration is not necessary and the calibration interval can be extended. <Head 835MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -25.44 - 54.40 - Mar. 01, 2021 -25.803 1.43 54.492 0.092 Feb. 28, 2022 -23.947 5.87 56.615 2.215 Feb. 18, 2023 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 192 of 195 Report No.: S23030102803001 <Head 1800MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -28.85 - 47.90 - Mar. 01, 2021 -28.545 1.06 47.809 0.091 Feb. 28, 2022 -25.8 10.57 45.156 2.744 Feb. 18, 2023 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 193 of 195 Report No.: S23030102803001 <Head 1900MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -24.79 - 50.80 - Mar. 01, 2021 -24.518 1.10 50.516 0.284 Feb. 28, 2022 -23.144 6.64 53.604 2.804 Feb. 20, 2023 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 194 of 195 Report No.: S23030102803001 <Head 2450MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -23.18 - 56.30 - Mar. 01, 2021 -23.39 0.91 56.342 0.042 Feb. 28, 2022 -26.296 13.44 54.99 1.310 Feb. 20, 2023 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data Page 195 of 195 Report No.: S23030102803001 <Head 2600MHz> Return Loss (dB) Delta (%) Impedance Delta(ohm) Date of Measurement -21.15 - 52.70 - Mar. 01, 2021 -21.248 0.46 53.053 0.353 Feb. 28, 2022 -21.627 2.25 54.412 1.712 Feb. 20, 2023 The return loss is <-20dB, within 20% of prior calibration; the impedance is within 5 ohm of prior calibration. Therefore the verification result should support extended calibration. Dipole Verification Data _______________________________________END _____________________________________

Antenna Information 1. Brand and model of Antenna Brand: Bmobile Model of Antenna: TC6283D-MX antenna pattern gain GSM850 IFA -2.3 GSM900 IFA -2.1 DCS IFA -1 PCS IFA -0.8 WCDMA2 IFA -0.8 WCDMA4 IFA -0.8 WCDMA5 IFA -2.3 WCDMA8 IFA -2.7 LTE IFA B2 IFA -0.8 B4 IFA -0.8 B5 IFA -2.3 B7 IFA 0.9 B12 IFA -3.1 B26 IFA -2.3 B66 IFA -0.8 B28 IFA -3.1 B38 IFA 0.86 WIFI/BT IFA 0.83 GPS IFA 0.75 3. Maximum transmition power 4.How many antennas are on the phone WWAN Main Antenna LTE DIV Antenna GWB Antenna 5.Antennas VSWR WWAN Main Antenna GWB VSWR LTE DIV Antenna Directional diagram BT WIFI GPS

Report No.: S23030102801002 Version.1.3 Page 1 of 54 RADIO TEST REPORT FCC ID: ZSW-30-125 Product: Mobile phone Trade Mark: Bmobile Model No.: BL63 Family Model: N/A Report No.: S23030102801002 Issue Date: 27 Mar. 2023 Prepared for b mobile HK Limited Flat 18; 14/F Block 1; Golden Industrial Building;16-26 Kwai Tak Street; Kwai Chung; New Territories; Hong Kong, China Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park, Sanwei Community, Xixiang Street Bao’an District, Shenzhen 518126 P.R. China Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090 Website: http://www.ntek.org.cn Report No.: S23030102801002 Version.1.3 Page 2 of 54 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 4 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 5 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 6 3.1 FACILITIES..................................................................................................................................................... 6 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 6 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 6 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 7 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 9 6 SETUP OF EQUIPMENT UNDER TEST ......................................................................................................... 10 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ..................................................................... 10 6.2 SUPPORT EQUIPMENT ............................................................................................................................... 11 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 12 7 TEST REQUIREMENTS .................................................................................................................................... 14 7.1 CONDUCTED EMISSIONS TEST ............................................................................................................... 14 7.1.1 Applicable Standard .................................................................................................................................. 14 7.1.2 Conformance Limit ................................................................................................................................... 14 7.1.3 Measuring Instruments ............................................................................................................................. 14 7.1.4 Test Configuration .................................................................................................................................... 14 7.1.5 Test Procedure ........................................................................................................................................... 14 7.1.6 Test Results ................................................................................................................................................ 15 7.2 RADIATED SPURIOUS EMISSION ............................................................................................................ 17 7.2.1 Applicable Standard .................................................................................................................................. 17 7.2.2 Conformance Limit ................................................................................................................................... 17 7.2.3 Measuring Instruments ............................................................................................................................. 18 7.2.4 Test Configuration .................................................................................................................................... 18 7.2.5 Test Procedure ........................................................................................................................................... 19 7.2.6 Test Results ................................................................................................................................................ 20 7.3 6DB BANDWIDTH ....................................................................................................................................... 26 7.3.1 Applicable Standard .................................................................................................................................. 26 7.3.2 Conformance Limit ................................................................................................................................... 26 7.3.3 Measuring Instruments ............................................................................................................................. 26 7.3.4 Test Setup .................................................................................................................................................. 26 7.3.5 Test Procedure ........................................................................................................................................... 26 7.3.6 Test Results ................................................................................................................................................ 26 7.4 DUTY CYCLE ...........................................................…

Text truncated - open the document above for the full version.

Report No.: S23030102801003 Version.…

Text truncated - open the document above for the full version.