ZT5-ENIGMAHandheld massager

USER MANUAL E N I G M A _ D O U B L E S O N I C _ P U B 1 _ Q 2 2 4 ENIGMA Double Sonic Unlock de ep and unpre ce dente d pleasures using tailor-made s onic waves. Enjoy it often, wis ely and with care. Congratulations on acquiring ENIGMA™ Double S onic. Before get ting more clos ely acquainte d with it, pleas e t ake a moment to look through this us er manual. IMPORTANT Your pleasure obje ct has be en locke d for transport ation. To unlock, simply conne ct the charger or s e e below. SAFETk tPleas e consult your healthcare provider with any questions or concerns you may have re garding your conditiong tThis product can be us e d by adults only. Ke ep out of reach of childreng tPe ople with re duce d physical, s ens ory or ment al capabilities or lack of experience and knowle dge should us e the device only if they have be en given supervision or instruction concerning the us e of the device in a safe way and underst and the hazards involve dg tOnly us e the product for the intende d purpos e. Sharing s ex toys with other pe ople may transmit s exual dis eas es. Do not share your s ex toys with pe ople other than your partner.Y tUs e prote ctive measures with your partner if ne cessary.Y tDo not us e the product if you dete ct any cracks or signs of de gradation on the covering material.Y tTo prevent st ains, do not ke ep your product on the abs orbent surfaces. If your product operates abnormally, turn off and consult the support s e ction on our websiteg tDo not us e the product if one or more components are damage d. 1 2 COMPLIANCE STATEMENT a. WARNING Please take note that changes or modifications not expressly approved in writing by the party responsible for compliance could void the user’s authority to operate the equipment and/or void any relevant warranties. b. FCC and IC statements This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This class B digital apparatus complies with Canadian ICES-003. b. Déclarations relatives à la FCC et à l’IC Cet appareil répond aux exigences de l’article 15 du Règlement de la FCC et aux normes RSS exemptes de licence d’Industrie Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer d’interférences nuisibles, et (2) il doit accepter toute interférence reçue, notamment celles susceptibles d’entraîner un fonctionnement non désiré. Cet appareil numérique de classe B est conforme à la norme canadienne NMB-003. 3 NOTE This equipment has been tested and found to comply with the limits for a Class B digit al device, pursuant to Part 15 of the FCC Rules. Thes e limits are designed to provide reas onable protection against harmful interference in a residential inst allation. This equipment generates, us es and can radiate radio frequency energy and, if not inst alled and us ed in accordance with the instructions, may caus e harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular inst allation. If this equipment does caus e harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the us er is encouraged to try to correct the interference by one or more of the following measures: • Reorienting or relocating the receiving antenna. • Increasing the s eparation between the equipment and receiver. • Connecting the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consulting the s eller, the device dealer or an experienced radio/TV technician for help. • The device must not be co-located or operate in conjunction with any other antenna or transmit ter. • The device has been evaluated to comply with general RF exposure requirements. • The device can be us ed in port able exposure conditions without restriction. • This device complies with IC RSS-10 2 radiation exposure limits s et forth for an uncontrolled environment. • Us ers can obt ain Canadian information on RF exposure and compliance. • Cet appareil ne doit pas être placé près d’une autre antenne ou d’un autre émet teur ou fonctionner conjointement avec ceux-ci. • L’appareil a été évalué pour répondre aux exigences générales d’exposition aux fréquences radio. • Il peut être utilis é dans des conditions d’exposition port able sans restriction. • Cet équipement est conforme aux limites d’exposition stipulées par IC RSS-10 2 pour un environnement non contrôlé. • Les utilisateurs peuvent obtenir des rens eignements canadiens sur l’exposition aux fréquences radio et sur la conformité. GETTING TO KNOW YOUR ENIGMA™ Double Sonic Double Stimulation Massager 4 Charging port Ultra-smooth premium silicone + / - Intensity control buttons (()) Power ON/OFF & Mode s election button HOW TO FIND FCC ID AND IC INFORMATION IN THE USER AP¥ ™Open the “LELO APP¬ ™Click “Menu¬ ™Click “Legal & Regulatory ̈ ™Click “ENIGMA™ Double S onic¬ ™FCC ID: "ZT5-ENIGMA ̈ ™IC: "9798A-ENIGMA ̈ ™HVIN: "ENIGMA™ Double S onic¬ ™PMN: "Handheld massager" 5 USING YOUR ENIGMA™ Double Sonic HOW TO USE YOUR PRODUCT WITHOUT THE LELO™ APP • Before the first us e, charge your ENIGMA™ Double S onic for 2 hours. • Press the + or the (( )) button to turn it on. • Press the (( )) button to switch between 8 modes. • Us e the + and the - buttons to increas e or decreas e the intensity. • Press and hold the (( )) button or the + and the - button simultaneously to turn it off. HOW TO USE YOUR PRODUCT WITH THE LELO™ APP • Before the first us e, charge your ENIGMA™ Double S onic for 2 hours. DOWNLOAD THE IOS / ANDROID version. • Press the (( )) button for 3 s econds to turn it on while activating the Bluetooth. • All the LED lights will blink simultaneously, showing the Bluetooth pairing. …

Text truncated - open the document above for the full version.

18-06-2024 Federal Communications Commission Office of Engineering and Technology Laboratory Division 445 12TH ST SW Washington DC 20554 United Stated E-Label declare for FCC ID: ZT5-ENIGMA Dear Sir/Madam, We hereby declare that the E-label Comply with the following regulations 1. Access to regulatory information provided without special codes, accessories, or permissions beyond the normal security protection to unlock the screen, sign-in page, or overall product access 2. The FCC ID, warning statements, or other information displayed electronically in a manner that is clearly legible without the aid of magnification. 3. Users able to access the regulatory information without requiring special access codes or permissions, and in all cases the information must be accessible in no more than three steps from a product’s main or home menu If you have any questions regarding this application, please free to contact me. Yours Sincerely, Name: Michael Duff signature: On Behalf of Company:. Suzhou Armocon Technology Co.,Ltd

UNITED STATES DESIGNATED AGENT LETTER Date: 5/28/2024 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Applicant U.S. designated agent Company Name: Suzhou Armocon Technology Co.,Ltd. Company Name: LELO, Inc Grantee Code: ZT5 FRN: 0033630260 Contact Name: Michael Duff Contact Name: Pavle Sedic Address: 3-5/F No77 SuHong Middle Road SIP Address: 5799 Fontanoso Way San Jose, City/Province/Zip: Jiangsu China City/Province/Zip: CA 95138 United States Telephone: Telephone: (877) 872-5356 Fax: Fax: N/A Email: 86-512-62588561 N/A [email protected] Email: [email protected] Applicable Equipment: FCC ID: ZT5-ENIGMA ATTN: Director of Certification: We, Suzhou Armocon Technology Co.,Ltd. and LELO, Inc understand and acknowledge the applicants consent and the designated agent’s obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above. We, Suzhou Armocon Technology Co.,Ltd. and LELO, Inc acknowledge the applicant’s acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever i s later. Applicant U.S. designated agent Name (Printed): Michael Duff Name (Printed): Pavle Sedic Title: Engineering Director Title: President Signature: Signature:

Applicant Declaration QSF27-14-04 Rev 1.1 Jan 17, 2024 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Suzhou Armocon Technology Co.,Ltd. Address 3-5/F No77 SuHong Middle Road SIP Jiangsu China FRN 0021052493 Grantee Code ZT5 FCC ID ZT5-ENIGMA Authorized Contact Name Michael Duff Contact Email [email protected] Contact Phone 86-512-62588561 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List Suzhou Armocon Technology Co.,Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Suzhou Armocon Technology Co.,Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date:2024-06-10 Print Name: Michael Duff Title: Operations Support Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Suzhou Armocon Technology Co.,Ltd. To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Company Name: Suzhou Armocon Technology Co.,Ltd. Address: 3-5/F No77 SuHong Middle Road SIP Jiangsu China Regarding: Confidentiality Request regarding application for FCC ID: ZT5-ENIGMA LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Printed Name (on file with the FCC associated with the Grantee Code): Michael Duff Title: Operations Support Manager Company Name: Suzhou Armocon Technology Co.,Ltd. 2024-5-22

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 1 of 4 External Photos for SHCR2405000876HS SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 2 of 4 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 3 of 4 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 4 of 4

F1_Remote V2 |PACKAGING|LABELS|June 19th,2024 CARDLABEL DUST BAG PACKING BOX 7350075029486 7350075029486 FCC ID : ZT5- ENIGMA SN:8335eXCdA2549R IC :9798A-ENIGMA ENIGMA TM DOUBLE SONIC SN:8335eXCdA2549R ENIGMA TM DOUBLE SONIC ENIGMA TM DOUBLE SONIC ENIGMA TM DOUBLE SONIC

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 1 of 3 Internal Photos for SHCR2405000876HS SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 2 of 3 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 3 of 3

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR240500087602 Page: 1 of 10 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Member of the SGS Group (SGS SA) 1 Cover Page RF Exposure Evaluation Report Application No.: SHCR2405000876HS FCC ID: ZT5-ENIGMA IC: 9798A-ENIGMA Applicant: Suzhou Armocon Technology Co., Ltd. Address of Applicant: 3-5/F No77 SuHong Middle Road SIP Jiangsu China Manufacturer: Suzhou Armocon Technology Co., Ltd. Address of Manufacturer: 3-5/F No77 SuHong Middle Road SIP Jiangsu China Factory: Suzhou Armocon Technology Co., Ltd. Address of Factory: 3-5/F No77 SuHong Middle Road SIP Jiangsu China Equipment Under Test (EUT): EUT Name: Handheld massager Model No.: ENIGMA TM DOUBLE SONIC Trade Mark: LELO Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 RSS-102 Issue 6 (December 15, 2023) Date of Receipt: 2024-05-14 Date of Test: 2024-05-23 to 2024-06-25 Date of Issue: 2024-06-25 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR240500087602 Page: 2 of 10 Revision Record Version Description Date Remark 00 Original 2024-06-25 / Authorized for issue by: Tested By Bill Wu/Project Engineer Approved By Parlam Zhan / Reviewer SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR240500087602 Page: 3 of 10 2 Contents Page 1 COVER PAGE .......................................................................................................................................... 1 2 CONTENTS ............................................................................................................................................... 3 3 GENERAL INFORMATION ..................................................................................................................... 4 3.1 GENERAL DESCRIPTION OF E.U.T. ..................................................................................................... 4 3.2 DETAILS OF E.U.T. ............................................................................................................................. 4 3.3 SEPARATION DISTANCE............................................................................................................................ 4 3.4 TEST LOCATION.................................................................................................................................. 5 3.5 TEST FACILITY .................................................................................................................................... 5 4 TEST STANDARDS AND LIMITS .......................................................................................................... 6 5 FCC RADIOFREQUENCY RADIATION EXPOSURE LIMITS ............................................................. 6 5.1 RF EXPOSURE TEST EXEMPTIONS FOR SINGLE RF SOURCES ....................................................................... 6 5.1.1 Blanket 1 mW Blanket Exemption .............................................................. 6 5.1.2 MPE-based Exemption ................................................................................. 6 5.1.3 SAR-based Exemption ................................................................................. 7 5.2 RF EXPOSURE TEST EXEMPTIONS FOR SIMULTANEOUS TRANSMISSION ...................................................... 8 6 IC SAR EXEMPTION LIMITS ................................................................................................................ 9 7 MEASUREMENT AND CALCULATION .............................................................................................. 10 7.1 MAXIMUM TRANSMIT POWER ............................................................................................................. 10 7.2 RF EXPOSURE CALCULATION ................................................................................................................. 10 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR240500087602 Page: 4 of 10 3 General Information 3.1 General Description of E.U.T. Power supply: DC 3.7V 420mAh Rechargeable battery Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Operation Frequency: 2402MHz to 2480MHz Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Date Rate: 1Mbps, 2Mbps Antenna Type: Ceramic Antenna Antenna Gain: 2 dBi (Provided by manufacturer) S/N: 8335eXCdA2549R Firmware Version: Enigma double sonic F.REV.C 3.3 Separation Distance Separation distance…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR240500087601 Page: 1 of 72 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only. Member of the SGS Group (SGS SA) TEST REPORT Application No.: SHCR2405000876HS FCC ID: ZT5-ENIGMA IC: 9798A-ENIGMA Applicant: Suzhou Armocon Technology Co., Ltd. Address of Applicant: 3-5/F No77 SuHong Middle Road SIP Jiangsu China Manufacturer: Suzhou Armocon Technology Co., Ltd. Address of Manufacturer: 3-5/F No77 SuHong Middle Road SIP Jiangsu China Factory: Suzhou Armocon Technology Co., Ltd. Address of Factory: 3-5/F No77 SuHong Middle Road SIP Jiangsu China Equipment Under Test (EUT): EUT Name: Handheld massager Model No.: ENIGMA TM DOUBLE SONIC Trade Mark: LELO Standard(s) : 47 CFR Part 15, Subpart C 15.247 RSS-247 Issue 3, August 2023 RSS-Gen Issue 5 Amendment 2 (February 2021) Date of Receipt: 2024-05-14 Date of Test: 2024-05-23 to 2024-06-25 Date of Issue: 2024-06-25 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR240500087601 Page: 2 of 72 Revision Record Version Description Date Remark 00 Original 2024-06-25 / Authorized for issue by: Tested By Bill Wu/Project Engineer Approved By Parlam Zhan / Reviewer SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR240500087601 Page: 3 of 72 2 Test Summary Radio Spectrum Technical Requirement Item FCC Requirement IC Requirement Method Result Antenna Requirement 47 CFR Part 15, Subpart C 15.203 & 15.247(c) RSS-Gen Clause 6.8 N/A Customer Declaration N/A: Not applicable Radio Spectrum Matter Part Item FCC Requirement IC Requirement Method Result Minimum 6dB Bandwidth 47 CFR Part 15, Subpart C 15.247a(2) RSS-247 Clause 5.2(a) ANSI C63.10 (2013) Section 11.8.1 Pass Conducted Peak Output Power 47 CFR Part 15, Subpart C 15.247(b)(3) RSS-247 Clause 5.4(d) ANSI C63.10 (2013) Section 11.9.1 Pass Power Spectrum Density 47 CFR Part 15, Subpart C 15.247(e) RSS-247 Clause 5.2(b) ANSI C63.10 (2013) Section 11.10.2 Pass Conducted Band Edges Measurement 47 CFR Part 15, Subpart C 15.247(d) RSS-247 Clause 5.5 ANSI C63.10 (2013) Section 11.13.3.2 Pass Conducted Spurious Emissions 47 CFR Part 15, Subpart C 15.247(d) RSS-247 Clause 5.5 ANSI C63.10 (2013) Section 11.11 Pass Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.209 & 15.247(d) RSS-247 Section 3.3 & RSS-Gen Section 8.9 ANSI C63.10 (2013) Section 6.10.5 Pass Radiated Spurious Emissions 47 CFR Part 15, Subpart C 15.209 & 15.247(d) RSS-247 Section 3.3 & RSS-Gen Section 8.9 ANSI C63.10 (2013) Section 6.4,6.5,6.6 Pass 99% Bandwidth - RSS-Gen Section 6.7 ANSI C63.10 Section 6.9.3 Pass SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. SHEM-TRF-001 Rev. 02 Sep01, 2023 Report No.: SHCR240500087601 Page: 4 of 72 3 Contents Page 1 COVER PAGE ..................................................................................................................................... 1 2 Test Summary ..................................................................................................................................... 3 3 Contents ............................................................................................................................................. 4 4 General Information............................................................................................................................ 6 4.1 Details of E.U.T. ........................................................................................................................... 6 4.2 Description of Support Units ......................................................................................................... 6 4.3 Power level setting using in test.................................................................................................... 6 4.4 Measurement Uncertainty ............................................................................................................ 7 4.5 Test Location ............................................................................................................................... 7 4.6 Test Facility .................................................................................................................................. 8 4.7 Deviation from Standards ............................................................................................................. 8 4.8 Abnormalities from Standard Conditions ....................................................................................... 8 5 Equipment List .............…

Text truncated - open the document above for the full version.

Approval sheet Page 1 of 9 ASC_RFANT3216120A5T_V05 Apr. 2010 MULTILAYER CERAMIC ANTENNA RFANT Series – RoHS Compliance 2.4 GHz ISM Band Working Frequency P/N: RFANT3216120A5T Series *Contents in this sheet are subject to change without prior notice. Approval sheet Page 2 of 9 ASC_RFANT3216120A5T_V05 Apr. 2010 FEATURES 1. Surface Mounted Devices with a small dimension of 3.2 X 1.6 X1.2 mm 3 meet future miniaturization trend. 2. LTCC process 3. High stability in Temperature / Humidity Change APPLICATIONS 1. 2.4GHz ISM band RF applications 2. Bluetooth, Wireless, HomeRF CONSTRUCTION DIMENSIONS Figure Symbol Dimension (mm) L 3.20 ± 0.20 W 1.60 ± 0.10 T 1.20 ± 0.10 a 0.25 ± 0.15 1. Feeding 2. Identification Mark 3. Soldering terminal W T E a a Approval sheet Page 3 of 9 ASC_RFANT3216120A5T_V05 Apr. 2010 Ground Soldering Pad 50 ΩTransmission Line Unit : mm 19.4 Empty Area 6x6 mm 50Ω ΩΩ ΩFeed line 45mm 20mm Series 1 Series 2 Ground Soldering Pad 50 ΩTransmission Line Unit : mm 19.4 Empty Area 6x6 mm 50Ω ΩΩ ΩFeed line 45mm 20mm Series 1 Series 2 ELECTRICAL CHARACTERISTICS RFANT3216120A5T Specification Working Frequency Range 2450 ± 50 MHz Fc (GHz) 2.9 Gain (dBi) 2 (Typical) VSWR 2 max. Series 1 6.8nH Matching component value Series 2 - Operation Temperature -40 ̊C ~ +85 ̊C * This frequency must be adjusted to 2.45GHz with matching circuit. SOLDER LAND PATTERN DESIGN Figure 1.66 0.8 2.3 1.63 6 3.43 1.6 6 1.36 0.36 0.88 0.34 1.88 1.83 0.8 0.54 1.66 0.8 2.3 1.63 6 3.43 1.6 6 1.36 0.36 0.88 0.34 1.88 1.83 0.8 0.54 Approval sheet Page 4 of 9 ASC_RFANT3216120A5T_V05 Apr. 2010 Antenna on Test Board ( Thickness 1.2mm) Antenna S11 on Test Board Antenna VSWR on Test Board E 0.8mm 1.6mm 19.4mm Empty Area 6x6 mm 50Ω ΩΩ ΩFeed line 1.66mm GROUND 0.8mm 1.6mm 19.4mm Empty Area 6x6 mm 50Ω ΩΩ ΩFeed line 1.66mm GROUND 0.8mm 1.6mm 19.4mm Empty Area 6x6 mm 50Ω ΩΩ ΩFeed line 1.66mm GROUND 0.8mm 1.6mm 19.4mm Empty Area 6x6 mm 50Ω ΩΩ ΩFeed line 1.66mm GROUND E Approval sheet Page 5 of 9 ASC_RFANT3216120A5T_V05 Apr. 2010 RADIATION PATTERN Radiation Pattern and Gain were dependent on measurement board design. The specification of RFANT3216120A5T antenna was measured based on the PCB size and installation position as shown in the below figure Test Board Vertical Horizontal Y - Z Plane Average Gain= 0.891 dBi Peak Gain = 2.12dBi Average Gain = 0.64 dBi Peak Gain= -6.07dBi Average Gain=-11.62dBi X - Z Plane Average Gain= -1.846 dBi Peak Gain= -7.78 dBi Average Gain= -11.97dBi Peak Gain= 0.96 dBi Average Gain= -2.29 dBi X - Y Plane Average Gain= -2.556 dBi Peak Gain= -9.41 dBi Average Gain= -15.54dBi Peak Gain= 1.40 dBi Average Gain= -2.78 dBi GROUND X Y Z GROUND X Y Z X Y Z Approval sheet Page 6 of 9 ASC_RFANT3216120A5T_V05 Apr. 2010 RELIABILITY TEST Test item Test condition / Test method Specification Solderability JIS C 0050-4.6 JESD22-B102D *Solder bath temperature：235 ± 5°C *Immersion time：2 ± 0.5 sec *Solder：Sn3Ag0.5Cu for lead-free At least 95% of a surface of each terminal electrode must be covered by fresh solder. Leaching (Resistance to dissolution of metallization) IEC 60068-2-58 *Solder bath temperature：260 ± 5°C *Leaching immersion time：30 ± 0.5 sec *Solder : SN63A Loss of metallization on the edges of each electrode shall not exceed 25%. Resistance to soldering heat JIS C 0050-5.4 *Preheating temperature：120~150°C, 1 minute. *Solder temperature：270±5°C *Immersion time：10±1 sec *Solder：Sn3Ag0.5Cu for lead-free Measurement to be made after keeping at room temperature f…

Text truncated - open the document above for the full version.