ZUEJIV2BWearable Vibrator

4 3 56 7 910 11 8 3 4 7 9 11 13 15 17 18 19 20 20 21

WOW Tech Canada Ltd. Attestation Statements Not Covered Entity Applicant To: Federal Communications Commission Date: 11-09-2023 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(ii) filing FCC ID: ZUEJIV2B [WOW Tech Canada Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely yours, Applicant Signature Printed Name: Eyal Bar Or Title:Head of Global Quality & Compliance Address: 1545 Carling Avenue, Suite 401. Ottawa, Ontario, Canada, K1Z 8P9 Tel:0049-30-95999-3841 Email: [email protected]

WOW Tech Canada Ltd. Attestation Statements Not Covered Equipment To: Federal Communications Commission Date: 11-09-2023 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) filing FCC ID: ZUEJIV2B [WOW Tech Canada Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature: Printed Name: Eyal Bar Or Title: Head of Global Quality & Compliance Address: 1545 Carling Avenue, Suite 401. Ottawa, Ontario, Canada, K1Z 8P9 Tel:0049-30-95999-3841 Email: [email protected]

WOW Tech Canada Ltd. Certification Designating a US Agent for Service of Process To: Federal Communications Commission Date: 11-09-2023 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: ZUEJIV2B WOW Tech Canada Ltd. (“the applicant”) certifies that as of the date of the filing of the application, WOW Tech USA Ltd. (“the agent”) is our designated U.S. agent. We acknowledge the applicant’s consent and the designated agent for service of process’s obligation to accept service of process. The applicant accepts to maintain an agent for service of process for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission- related proceeding involving the equipment. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. APPLICANT Company Name: WOW Tech Canada Ltd. Contact Person: Eyal Bar-Or Address: 1545 Carling Avenue, Suite 401. Ottawa, Ontario, Canada, K1Z 8P9 Tel.: 0049-30-95999-3841 Email: [email protected] FCC FRN: 0021055090 U.S. Agent Company Name: WOW Tech USA Ltd. Contact Person: Eyal Bar-Or Address: 103 Foulk Road, Suite 202, Wilmington, Delaware, USA ,19803-3742 Tel.: 1-866-647-9194 Email: [email protected] FCC FRN: 0033538497 Sincerely yours, The Applicant The Agent Company Name WOW Tech Canada Ltd WOW Tech USA Ltd. Contact Person Eyal Bar-Or Eyal Bar-Or Signature

WOW Tech Canada Ltd. TCB FCC Request for Confidentiality Letter MS-0044715 Page 1 of 2 Revision 1 Legal Scope: Global Business Scope: Cross Business Process Scope: Cross Process Date: ___2023-09-11_____ Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Confidentiality Request for FCC ID: ZUEJIV2B Pursuant to FCC 47 CRF 0.457(d), the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term n/a External Photo Short Term Permanent Internal Photos *** Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Schematics Short Term Permanent Test Setup*** Short Term Permanent Tune-Up Procedure Short Term Permanent User’s Manual*** Short Term Permanent Part List/ Antenna Gain Information Datasheet WOW Tech Canada Ltd. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. WOW Tech Canada Ltd. TCB FCC Request for Confidentiality Letter MS-0044715 Page 2 of 2 Revision 1 Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. (*** Exceptional case for Permanent Confidentiality for these Exhibits by PAG only) Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of specify number of days not to exceed 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By: ______________________ Head of Global Quality & Compliance Eyal Bar Or (Signature/ Title) (Print name) Tel: 0049-30-95999-3841 Email: [email protected]

1.FCC ID and IC , HVIN are laser etched to the device. See below information: FCC ID: ZUEJIV2B IC: 9804A-JIV2B HVIN: JIV2B 2. PMN: Jive 2 can be found on the box design. 3. The FCC ID, IC will be laser etched here: 4. FCC and IC statements, the device is too small and not capable of providing information electronically, it is on page 21 of the Jive 2 safety instructions. File name is Manual MA- 00285_rev-A.

ANT

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN23NRKC 002 Auftrags-Nr.: Order no.: 168442441 Seite 1 von 4 Page 1 of 4 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2023-08-25 Auftraggeber: Client: WOW Tech Canada Ltd., 1545 Carling Avenue, Suite 401. Ottawa, Ontario, Canada, K1Z 8P9 Prüfgegenstand: Test item: Wearable Vibrator Bezeichnung / Typ-Nr.: Identification / Type no.: Jive 2 (JIV2B) (Trademark: We-Vibe) Auftrags-Inhalt: Order content: Test Report Prüfgrundlage: Test specification: CFR47 FCC Part 2: Section 2.1093 CFR47 FCC Part 1: Section 1.1310 RSS-102 Issue 5 KDB 447498 D01 General RF Exposure Guidance v06 Wareneingangsdatum: Date of sample receipt: 2023-09-12 Please refer to Photo Document Prüfmuster-Nr.: Test sample no: A003563028-001 A003559178-002~003 Prüfzeitraum: Testing period: 2023-09-12 - 2023-09-20 Ort der Prüfung: Place of testing: TÜV Rheinland (Shenzhen) Co., Ltd. Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: X Signed by: Breeze Jiang genehmigt von: authorized by: X Signed by: Lin Lin Datum: Date: 2023-10-27 Ausstellungsdatum: Issue date: 2023-10-27 Stellung / Position: Assistant Project Manager Stellung / Position: Reviewer Sonstiges / Other: FCC ID: ZUEJIV2B IC: 9804A-JIV2B, HVIN: JIV2B Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the a. m. test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TÜV Rheinland (Shenzhen) Co., Ltd. 1601 R&D Room, 1602-1604, 17-18F, Building 7 Site C, Vanke Cloud City Phase I, Xingke First Street, Xili Street, Xili Community, Nanshan District, Shenzhen 518052, P.R. China Mail: [email protected] · Web: www.tuv.com Prüfbericht - Produkte Test Report - Products Prüfbericht - Nr.: Test Report No.: CN23NRKC 002 Seite 2 von 4 Page 2 of 4 Anmerkungen Remarks 1 The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. 2 As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. 3 Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. 4 The decision rule for statements of conformity, based on numerical measurement results, in this test report is based on the “Zero Guard Band Rule” and “Simple Acceptance” in accordance with ILAC G8:2019 and IEC Guide 115:2021, unless otherwise specified in the applied standard mentioned on Page 1 of this report or requested by the customer. This means that measurement uncertainty is not taken in account and hence also not declared in the test report. For additional information to the resulting risk based of this decision rule please refer to ILAC G8:2019. Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2021, es sei denn, in d…

Text truncated - open the document above for the full version.

We-Vibe Jive 2 (830-00227), 10.04.2023 Page | 1 Antenna Technical Specifications & Operation Description, WV Jive 2 (830-00227) This Device is included Bluetooth Low Energy (version 5.0); designed for wireless communication in 2.4GHz ISM band and GFSK modulation. For more details refer to the user manual.  Antenna Pattern plot simulation (2440 MHz)  Picture of the antenna integrated on the PCB (PCB Trace 17 mm).  Channel Frequency: 2402–2480 MHz with 2 MHz spacing We-Vibe Jive 2 (830-00227), 10.04.2023 Page | 2  Max Antenna Gain 2.45GHz: 1.4 dBi Frequency (MHz) Max Gain (dBi) 2402 1.21 2410 1.24 2420 1.27 2430 1.30 2440 1.32 2450 1.40 2460 1.20 2470 1.08 2480 1.04  Conducted power (setting output to 0.6 dBm): -2.90 dBm  Chipset: AP2T21F40 with crystal CN4024M00012T1238010 24MHz.  Manufacturer name: Shanghai Tomison Electronic Co.,Ltd. Manufacturer address: Fengxian DistrictNo.1118 GongYe Rd, Shanghai

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN23NRKC 001 Auftrags-Nr.: Order no.: 168442441 Seite 1 von 20 Page 1 of 20 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2023-08-25 Auftraggeber: Client: WOW Tech Canada Ltd., 1545 Carling Avenue, Suite 401. Ottawa, Ontario, Canada, K1Z 8P9 Prüfgegenstand: Test item: Wearable Vibrator Bezeichnung / Typ-Nr.: Identification / Type no.: Jive 2 (JIV2B) (Trademark: We-Vibe) Auftrags-Inhalt: Order content: Test Report Prüfgrundlage: Test specification: FCC CFR Title 47, Part 15, Subpart C, Section 15.247 RSS-247 Issue 2 February 2017 RSS-Gen Issue 5 February 2021 Wareneingangsdatum: Date of sample receipt: 2023-09-12 Please refer to Photo Document Prüfmuster-Nr.: Test sample no: A003563028-001 A003559178-002~003 Prüfzeitraum: Testing period: 2023-09-12 - 2023-09-20 Ort der Prüfung: Place of testing: TÜV Rheinland (Shenzhen) Co., Ltd. Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: X Signed by: Breeze Jiang genehmigt von: authorized by: X Signed by: Lin Lin Datum: Date: 2023-10-27 Ausstellungsdatum: Issue date: 2023-10-27 Stellung / Position: Sachverständige(r)/Expert Stellung / Position: Sachverständige(r)/Expert Sonstiges / Other: FCC ID: ZUEJIV2B IC: 9804A-JIV2B, HVIN: JIV2B Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the above mentioned test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland (Shenzhen) Co., Ltd., 1601-1604, 17-18F, Tower A Building 2, Shenzhen International Innovation Valley, Dashi 1st Road, Xili Street, Xili Community, Nanshan District, Shenzhen 518052, P. R. China Mail: [email protected] · Web: www.tuv.com Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: CN23NRKC 001 Test report no.: Seite 2 von 20 Page 2 of 20 Anmerkungen Remarks 1 Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. 2 Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. 3 Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. 4 Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2021, es sei denn, in der auf Seite 1 dieses Berichts genannten angewandten Norm ist etwas anderes festgelegt oder vom Kunden gewünscht. Dies bedeutet, dass die Messunsicherheit nicht berücksichtigt wird und daher auch nicht im Prüfbericht angegeben wird. Zu weiteren Informationen bezueglich des Risikos durch diese Entscheidungsregel siehe ILAC G8:2019. The decision rule for statements of conformity, based on numerical measurement results, in this test report is based on the “Zero Guard Band Rule” and “Simple Acceptance” in accordance with ILAC G8:2019 and IEC Guide 1…

Text truncated - open the document above for the full version.

Prüfbericht - Produkte Test Report - Products Appendix B CN23NRKC 001 Page 1 of 2 Appendix B: Photographs of the Test Set-Up APPENDIX B: PHOTOGRAPHS OF THE TEST SET-UP ....................................................................................................... 1 PHOTOGRAPH 1: SET-UP PHOTO FOR RADIATED SPURIOUS EMISSION, BELOW 1GHZ ...................................................................... 2 PHOTOGRAPH 2: SET-UP PHOTO FOR RADIATED SPURIOUS EMISSION, ABOVE 1GHZ ...................................................................... 2 Prüfbericht - Produkte Test Report - Products Appendix B CN23NRKC 001 Page 2 of 2 Photograph 1: Set-up photo for Radiated Spurious Emission, Below 1GHz Photograph 2: Set-up photo for Radiated Spurious Emission, Above 1GHz