ZVASB000014Active Subwoofer

F:\HT-CZ1-11_UC\4559026111\4559026111HTCT180UC\01GB- HTCT180UC\010COV.fm masterpage: Right HT-CT180 4-559-026-11(1) HT-CT180 Operating Instructions GB Guide de référence FR Manual de instrucciones ES Sound Bar 010COV.book Page 1 Thursday, September 18, 2014 5:01 PM 2 GB HT-CT180 4-559-026-11(1) F:\HT-CZ1-11_UC\4559026111\4559026111HTCT180UC\01GB- HTCT180UC\020REG.fm masterpage: Left Owner’s Record The model and serial numbers are located on the bottom of the Bar Speaker. Record serial numbers in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Model No. HT-CT180 Serial No._____________________________ To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The unit is not disconnected from the mains as long as it is connected to the AC outlet, even if the unit itself has been turned off. To reduce the risk of fire, do not cover the ventilation opening of the appliance with newspapers, tablecloths, curtains, etc. Do not expose the appliance to naked flame sources (for example, lighted candles). To reduce the risk of fire or electric shock, do not expose this appliance to dripping or splashing, and do not place objects filled with liquids, such as vases, on the appliance. As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Do not expose batteries or appliances with battery-installed to excessive heat, such as sunshine and fire. Indoor use only. For the customers in the U.S.A. The Caution Marking is put on the Bottom Enclosure (For the Bar Speaker). This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. For the Bar Speaker The nameplate and the date of manufacture marking are located on the bottom. Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, WARNING 010COV.book Page 2 Thursday, September 18, 2014 5:01 PM F:\HT-CZ1-11_UC\4559026111\4559026111HTCT180UC\01GB- HTCT180UC\020REG.fm masterpage: Right 3 GB HT-CT180 4-559-026-11(1) stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specified by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power- supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. The following FCC statement applies only to the version of this model manufactured for sale in the U.S.A. Other versions may not comply with FCC technical regulations. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna (aerial). – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. This equipment must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets GB 010COV.book Page 3 Thursday, September 18, 2014 5:01 PM 4 GB HT-CT180 4-559-026-11(1) F:\HT-CZ1-11_UC\4559026111\4559026111HTCT180UC\01GB- HTCT180UC\020REG.fm masterpage…

Text truncated - open the document above for the full version.

TCL通力电子（惠州）有限公司 TCL TECHNOLY ELECTRONICS (HUI ZHOU) CO.,LTD AGENCY AUTHORIZATION LETTER FCC ID: ZVASB000013 (Bar: SA-CT180) ; ZVASB000014 (Subwoofer: SA-WCT180) Date: 2014-9-8 To whom it may concern: We, the undersigned, hereby authorize Audix Technology (ShenZhen) Co.,Ltd to act on our behalf, as our agent, in the following matters related to the FCC approval of our products: report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. Any act carried out by Audix within the scope of this authorization shall have the same effects as our own. This authorization shall expire 6 months form original date. If you have any Questions regarding the authorization, please don’t hesitate to contact us. Thank you. Sincerely, By: __________________________ (Signature 1 ) Name of authorized signer): Weirun Peng Title of authorized signer: Approbation Engineer Company Name: TCL TECHNOLY ELECTRONICS (HUIZHOU) CO., LTD Tel: 0752-2606710 E-mail: [email protected] Section 37 Zhongkai High-tech Development Zone, Huizhou City, Guangdong Province, 516006 P.R. China TEL: 86 752-2638000 FAX: 86 752-2606641 Website: www.tcl.com

TCL通力电子（惠州）有限公司 TCL TECHNOLY ELECTRONICS (HUI ZHOU) CO.,LTD Date: 2014-9-8 Federal Communications Commission Authorization and Evaluation Division FCC ID: ZVASB000013 （Bar SA-CT180） FCC ID：ZVASB000014 （Subwoofer SA-WCT180） Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this application as outlined below: 1. Block diagram 2. Schematics 3. Operation Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might to harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentation will not be made before the date of the grant for this application. Sincerely, By: __________________________ Weirun Peng (Signature 1 ) (Print name) Title: Approbation Engineer On behalf of: TCL TECHNOLY ELECTRONICS (HUIZHOU) CO., LTD (Company Name) Telephone: 86-752-2606710 Section 37 Zhongkai High-tech Development Zone, Huizhou City, Guangdong Province, 516006 P.R. China TEL: 86 752-2638000 FAX: 86 752-2606641 Website: www.tcl.com

R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:ZVASB000014 page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F14356 10-1 10. PHOTOGRAPH OF EUT Figure 1 General Appearance of the EUT Figure 2 General Appearance of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:ZVASB000014 page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F14356 10-2 Figure 3 General Appearance of the EUT Figure 4 General Appearance of the EUT

MATERIAL COMPOSITION FIGURE Polyester Film(t0.016) Laminate Printing surface Polyester Film(TLW50/50#PET) Acrylic-base pressure-sensitive adhesive Silicone-impregnated release paper PETP + PSA (t=0.119) ＜CAUTION＞ 3） This drawing is for printing contents. Letterring font, size and position are depending on the print data. この図面は印刷表示内容を示す。書体、文字大きさ、配置寸法など詳細は印刷データに拠ること。 1） Purchase recycled resins and wire rods only from the business partners that Sony approves as Green Partners. 再生樹脂・被覆電線はグリーンパートナー認定取引先から調達すること。 2) This part should not contain any substances which are specified in SS-00259-01. この部品には SS-00259-01 に指定する物質を含んだ材料は、使用してはならない。 EC-F ‘14. 67GBCZ1B0-0Z0B1-M

R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:ZVASB000014 page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F14356 10-3 Figure 5 Inside of the EUT Figure 6 Inside of the EUT R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:ZVASB000014 page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F14356 10-4 Figure 7 Components Side of the PCB Figure 8 Components Side of the PCB R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:ZVASB000014 page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F14356 10-5 Figure 9 Components Side of the PCB Figure 10 Components Side of the PCB R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:ZVASB000014 page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F14356 10-6 Figure 11 Components Side of the PCB Figure 12 Components Side of the PCB R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:ZVASB000014 page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F14356 10-7 Figure 13 Components Side of the PCB Figure 14 Components Side of the PCB R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:ZVASB000014 page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F14356 10-8 Figure 15 Components Side of the PCB

R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:ZVASB000013 Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F14355 FCC PART 15C TEST REPORT FOR CERTIFICATION On Behalf of TCL Technoly Electronics (Huizhou) Co.,Ltd. System Name : Sound Bar (Active Speaker System and Active Subwoofer) System Model Number : HT-CT180 (SA-CT180 and SA-WCT180) Brand Name : Sony EUT Name EUT Model No. Active Speaker System SA-CT180 FCC ID: ZVASB000013 Prepared for : TCL Technoly Electronics (Huizhou) Co.,Ltd. Section 37, Zhongkai High-tech Development Zone, Huizhou City, GuangDong Province, P.R. China Prepared By : Audix Technology (Shenzhen) Co., Ltd. No. 6, Ke Feng Rd., 52 Block, Shenzhen Science & Industrial Park, Nantou, Shenzhen, Guangdong, China Tel: (0755) 26639496 Report Number ACS-F14355 Date of Test Nov.01~05, 2014 Date of Report Dec.05, 2014 R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:ZVASB000013 Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F14355 TABLE OF CONTENTS Description Pag 1. SUMMARY OF STANDARDS AND RESULTS.......................................................... 1-1 1.1. Description of Standards and Results .................................................................................. 1-1 2. GENERAL INFORMATION ......................................................................................... 2-1 2.1. Description of Device (EUT) ............................................................................................... 2-1 2.2. Special Test information ...................................................................................................... 2-2 2.3. Channel List ......................................................................................................................... 2-2 2.4. Tested Supporting System Details ....................................................................................... 2-3 2.5. EUT Configuration and operation conditions for test.......................................................... 2-3 2.6. Test Facility ......................................................................................................................... 2-4 2.7. Measurement Uncertainty (95% confidence levels, k=2) .................................................... 2-4 3. POWER LINE CONDUCTED EMISSION TEST ....................................................... 3-1 3.1. Test Equipment .................................................................................................................... 3-1 3.2. Block Diagram of Test Setup ............................................................................................... 3-1 3.3. Power Line Conducted Emission Test Limits...................................................................... 3-1 3.4. Configuration of EUT on Test ............................................................................................. 3-1 3.5. Operating Condition of EUT................................................................................................ 3-2 3.6. Test Procedure...................................................................................................................... 3-2 3.7. Conducted Disturbance at Mains Terminals Test Results.................................................... 3-2 4. RADIATED EMISSION TEST ...................................................................................... 4-1 4.1. Test Equipment .................................................................................................................... 4-1 4.2. Block Diagram of Test Setup ............................................................................................... 4-2 4.3. Radiated Emission Limit Standard: FCC 15.209 and 15.249 .............................................. 4-3 4.4. EUT Configuration on Test.................................................................................................. 4-3 4.5. Operating Condition of EUT................................................................................................ 4-3 4.6. Test Procedure...................................................................................................................... 4-3 4.7. Radiated Emission Test Results ........................................................................................... 4-4 5. 20 DB BANDWIDTH TEST ........................................................................................... 5-1 5.1. Test Equipment .................................................................................................................... 5-1 5.2. Limit..................................................................................................................................... 5-1 5.3. Test Results .......................................................................................................................... 5-1 6. BAND EDGE COMPLIANCE TEST ............................................................................ 6-1 6.1. Test Equipment .................................................................................................................... 6-1 6.2. Limit..................................................................................................................................... 6-1 6.3. Test Produce ......................................................................................................................... 6-1 6.4. Test Results .......................................................................................................................... 6-1 7. ANTENNA REQUIREMENT ........................................................................................ 7-1 8. DEVIATION TO TEST SPECIFICATIONS................................................................ 8-1 9. PHOTOGRAPH OF TEST ............................................................................................. 9-1 9.1. Photos of Power Line Conducted Emission Test ...............................................…

Text truncated - open the document above for the full version.

R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:ZVASB000014 page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F14356 9-1 9. PHOTOGRAPH OF TEST 9.1. Photos of Power Line Conducted Emission Test R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:ZVASB000014 page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F14356 9-2 9.2. Photos of Radiated Emission Test (30-1000MHz) R AUDIX Technology (Shenzhen) Co., Ltd. FCC ID:ZVASB000014 page Audix Technology (Shenzhen) Co., Ltd. Report No. ACS-F14356 9-3 (Above 1000MHz)