ZWZISL024DB1ISL024DB1 Radio Transceiver

Wireless RF Transceiver This document contains information about the hardware between ISL024DB1 transceiver and Receiver. Information includes the theory of operation, specifications, interface definitions, configuration information and mechanical drawings ISL024DB1 User’s Guide information about the hardware interface between ISL024DB1 transceiver and Receiver. Information includes the theory of operation, specifications, interface ion information and mechanical drawings Proprietary Material The information and descriptions contained herein are the property of ISL. Such information and descriptions may not be copied or reproduced by any means, or disseminated or distributed without the express prior written permission of ISL. This document is for information purposes only and is subject to change without notice. Statement of Limited Warranty ISL warrants equipment of its manufacture, and bearing its identification to be free from defects in workmanship and material for a period of 12 months for electronics and 12 months for mechanical parts and Temperature probes from date of delivery from the factory or authorised distributor under normal use and service and otherwise when such equipment is used in accordance with instructions furnished by ISL and for the purposes disclosed in writing at the time of purchase, if any. ISL liability under this warranty shall be limited to replacement or repair of any defective equipment or part which, having been returned to ISL, has been inspected and determined by ISL to be defective, excluding battery cells. THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EITHER EXPRESS OR IMPLIED, AS TO DESCRIPTION, QUALITY, AND MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE OR USE, OR ANY OTHER MATTER. Revision History Operation is subject to the following two conditions: this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation. Caution: any changes or modifications not expressly approved by the Manufacturer could void the user's authority to operate the equipment. Issue Date Author Comments 0-1 09/09/2011 Vahid Tambe Initial Release 0-2 29/09/2011 Rob Jevans Removed antenna references Contents 1. Safety Information .......................................................................................................................... 5 DECLARATION OF CONFORMITY ................................................................................................... 8 2. ISL024DB1 ..................................................................................................................................... 9 3. Theory of operation ......................................................................................................................... 9 3.1 Network Topologies ...................................................................................................................... 9 3.2 Point-To-Point............................................................................................................................... 9 3.3 Point-to -Multipoint .................................................................................................................... 10 3.4 Other network topologies ............................................................................................................ 11 4. Board Level Pin Assignments ....................................................................................................... 13 5. Specifications ................................................................................................................................ 14 1. Safety Information Agency Identification Numbers Part # FCC ISL024DB1 ZWZISL024DB1 Approved Antenna List The ISL024DB1 has been designed with an internal PCB antenna only. Caution: Any changes or modifications not expressly approved by Invisible Systems could void the user’s authority to operate the equipment. FCC REQUIREMENTS NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does not cause harmful interference to radio or television reception, which can FCC WARNING This equipment generates or uses radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Re-orient or relocate the receiving antenna • Increase the separation between the equipment and the receiver • Connect the equipment to an outlet on a circuit that is different from that to which the receiver is connected. Replacing battery WARNING! Only qualified service personnel may install this equipment. The instructions in this manual are intended for use by qualified service personnel only. Only qualified persons should service the system. The installation and service of this hardware is to be performed only by service personnel having appropriate training and experience necessary to be aware of hazards to which they are exposed in performing a task and of measures to minimize the danger to themselves or other persons. Electrical shock hazards from the telecommunication network and AC mains are possible …

Text truncated - open the document above for the full version.

Delivering information invisible systems Model: ISL024DB1 FCC ID: ZWZISL024DB1 240000123

TRaC Global Radio Test Report FOR Invisible Systems Ltd ON ISL024DB1 DOCUMENT NO. TRA-006915WUS3 Total number of pages : 38 TRaC Wireless Test Report : TRA-006915WUS3 Applicant : Invisible Systems Ltd Apparatus : ISL024DB1 Specification(s) : CFR47 Part 15 C July 2008 – 15.249 FCCID : ZWZISL024DB1 Purpose of Test : Certification Authorised by : : J Charters, Radio Product Manager Issue Date : 28 th September 2011 Authorised Copy Number : PDF TRaC Global Test Report: TRA-006915WUS3 Contents Section 1: Introduction 4 1.1 General 4 1.2 Tests Requested By 5 1.3 Manufacturer 5 1.4 Apparatus Assessed 5 1.5 Test Result Summary 6 1.6 Notes Relating To The Assessment 7 1.7 Deviations from Test Standards 7 Section 2: Measurement Uncertainty 8 2.1 Application of Measurement Uncertainty 8 2.2 Measurement Uncertainty Values 9 Section 3: Modifications 10 3.1 Modifications Performed During Assessment 10 Appendix A: Formal Emission Test Results 11 A1 Transmitter Intentional Emission Radiated 12 A2 Radiated Electric Field Emissions 13 A3 Unintentional Radiated Spurious Emissions 16 A4 ac Power Line Conducted Emissions 18 Appendix B: Supporting Graphical Data 19 Appendix C: Additional Test and Sample Details 26 Appendix D: Additional Information 32 Appendix E: Calculation of the duty cycle correction factor 33 Appendix F: Photographs and Figures 34 3 TRaC Global Test Report: TRA-006915WUS3 Section 1: Introduction 1.1 General This report contains an a ssessment of an apparatus against Electromagnetic Compatibility Standards based upon tests carried out on samples submitted to the Laboratory. Test performed at: TRaC Global [ X ] Unit E South Orbital Trading Park Hedon Road Hull, HU9 1NJ. United Kingdom. Telephone: +44 (0) 1482 801801 Fax: +44 (0) 1482 801806 TRaC Global [ ] Unit 1 Pendle Place Skelmersdale West Lancashire, WN8 9PN United Kingdom Telephone: +44 (0) 1695 556666 Fax: +44 (0) 1695 577077 Email: [email protected] Web site: http://www.tracglobal.com Tests performed by: Geoff Cruickshank Report author: Geoff Cruickshank This report must not be reproduced except in full without prior written permission from TRaC Global. 4 TRaC Global Test Report: TRA-006915WUS3 1.2 Tests Requested By This testing in this report was requested by: Invisible Systems Ltd 9 Beetham Road Milnthorpe Cumbria LA7 7QL United Kingdom 1.3 Manufacturer As above. 1.4 Apparatus Assessed The followin g apparatus was assessed between 17/08/11 and 22/08/11: ISL024DB1 The ISL024DB1 is a battery powered single channel 925.78MHz radio transceiver with analogue, temperature, pulse and humidity inputs. 5 TRaC Global Test Report: TRA-006915WUS3 1.5 Test Result Summary Full details of test results are contained within Appendix A. The following table summarises the results of the assessment. The statements relating to compliance with the standards below apply ONLY as qualified in the notes and deviations stated in sections 1.6 to 1.7 of this test report. Full details of test results are contained within Appendix A. The following table summarises the results of the assessment. Test Type Regulation Measurement standard Result Spurious Emissions Radiated <1000MHz Title 47 of the CFR: Part 15 Subpart (c) 15.209 ANSI C63.10 Pass Spurious Emissions Radiated >1000MHz Title 47 of the CFR: Part 15 Subpart (c) 15.209 Part 15 Subpart (c) 15.249 (a),(e) ANSI C63.10 Pass Intentional Emission Frequency Title 47 of the CFR: Part 15 Subpart (c) 15.249 (a) ANSI C63.10 Pass Intentional Emission Field Strength Title 47 of the CFR: Part 15 Subpart (c) 15.249 (a) ANSI C63.10 Pass Intentional Emission Band Occupancy Title 47 of the CFR: Part 15 Subpart (c) 15.215 ANSI C63.10 Pass Unintentional Radiated Spurious Emissions Title 47 of the CFR: Part 15 Subpart (b) 15.109 ANSI C63.10 Pass Antenna Arrangements Integral: Title 47 of the CFR: Part 15 Subpart (c) 15.203 - Pass Antenna Arrangements External Connector Title 47 of the CFR: Part 15 Subpart (c) 15.204 - N/A Restricted Bands Title 47 of the CFR: Part 15 Subpart (c) 15.205 - - Maximum Frequency of Search Title 47 of the CFR: Part 15 Subpart (c) 15.33 - - Extrapolation Factor Title 47 of the CFR: Part 15 Subpart (c) 15.31(f) - - Abbreviations used in the above table: ANSI C 63.10:2009 is outside the scope of the laboratories UKAS accreditation. Mod : Modification CFR : Code of Federal Regulations ANSI : American National Standards Institution REFE : Radiated Electric Field Emissions PLCE : Power Line Conducted Emissions 6 TRaC Global Test Report: TRA-006915WUS3 1.6 Notes Relating To The Assessment With regard to this assessment, the following points should be noted: The results contained in this report relate only to the items tested and were obtained in the period between the date of initial receipt of samples and the date of issue of the report. The apparatus was set up and exercised using the configurations, modes of operation and arrangements defined in this report only. Particular operating modes, apparatus monitoring methods and performance criteria required by the standards tested to have been performed except where identified in Section 1.7 of this test report (Deviations from Test Standards). For emissions testing, throughout this test report, “Pass” indicates that the results for the sample as tested were below the specified limit (refer also to Section 2, Measurement Uncertainty). Where relevant, the apparatus was only assessed using the monitoring methods and susceptibility criteria defined in this report. All testing was performed under the following environmental conditions: Temperature : 17 to 23 C Humidity : 45 to 75 % Barometric Pressure : 86 to 106 kPa All dates used in this report are in the format dd/mm/yy. This assessment has been performed in accordance with the requirements of ISO/IEC 17025. 1.7 Deviations from Test Standards There were no deviations from the standards test ed to. 7 TRaC Global Test Report: TRA-006915WUS3 Section 2: Measurement Uncertainty 2.1 Application of Measurement…

Text truncated - open the document above for the full version.