2A22Z-W101Smart Camera

Botslab Inc. Applicant as U.S. Agent Letter of Attestation Date: February 2, 2026 To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2A22Z-W101 Botslab Inc. (“the applicant”) as required by section 2.911(d)(7), will also serve as the agent for service of process for the above referenced FCC ID. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. Designated U.S. Agent from Applicant Company Company Name: Botslab Inc. Contact Person: John Derr FRN: 0031326077 Address: 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware, USA Tel.: +18663600505 Email: [email protected] Sincerely yours, Signature Printed Name: John Derr Title: +18663600505 Email: [email protected]

Botslab Inc. 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware, USA Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: February 2, 2026 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2A22Z-W101 Botslab Inc. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: John Derr Title: Certification Administrator Address: 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware, USA Tel.: +18663600505 Email: [email protected]

Botslab Inc. 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware, USA 1 | P a g e Attestation Statements To: Federal Communications Commission Date: Feb. 2, 26 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: 2A22Z-W101 Product Name: Smart Camera This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Printed Name: John Derr Title: Certification Administrator Address: 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware, USA Tel.: +18663600505 Email: [email protected] Botslab Inc. 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware, USA 2 | P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. compliance ☒ The Memory used is limited to run the Cybersecurity or anti-virus software. compliance ☒ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. compliance ☒ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check SBOM (Software Bill of Materials) [For Device is not Inherent compliance] Section Component Name Version Supplier 1 2 3

Botslab Inc. 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware, USA (February 10, 2026) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for: FCC ID: 2A22Z-W101 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request permanent confidential treatment of the exhibits accompanying this certification application as outlined below : ⎯ Block Diagram ⎯ Schematics ⎯ Operational Description ⎯ Tune-Up Procedure / Parts List ⎯ SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES ⎯ (Etc.) The above exhibits contain trade secrets and/or proprietary information that are not publicly available and materials that the Applicant has spent considerable efforts in developing. Public disclosure of these may be harmful to the Applicant and give an unfair advantage to competitors on the market. Pursuant to DA 04-1705, the applicant also requests temporary confidential treatment of the exhibits outlined below for a period of (up to 180) days from the date of equipment authorization and prior to marketing in the United States to prevent the premature release of any sensitive information. Applicant is aware of their responsibility to notify DERYCOM in the event information regarding the product or the product is made available to the public before the requested period has expired. ⎯ User Manual ⎯ Internal Photos ⎯ External Photos ⎯ Test Setup Photos ⎯ (Etc.) Sincerely, (Signature) Title: Certification Administrator Address: 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware, USA Tel.: +18663600505 Email: [email protected]

Botslab Inc. 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware, USA (February 2, 2026) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2A22Z-W101 I, the undersigned, hereby authorize (Shenzhen LGT Test Service Co., Ltd.) to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by (Shenzhen LGT Test Service Co., Ltd.)shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with (Botslab Inc.). We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, (Signature) (Full name of contact person listed on FCC’s website) John Derr (Title) Certification Administrator Tel: +18663600505 Fax: +18663600505 Email: [email protected]

Botslab Inc. Declaration Letter of Model Difference Date: 2026-02-10 FCC ID: 2A22Z-W101 Tested Model Number: SC-BE01-M4 Adding Model Number(s): SC-BE01-M4-V0, SC-BE01-M4-V1, SC-BE01-M4-V2, SC-BE01- M4-V3, SC-BE01-M4-V4, SC-BE01-M4-V5, SC-BE01-M4-V6, SC-BE01-M4-V7, SC-BE01-M4-V8, SC-BE01-M4-V9 All Adding Model Number(s) is/are same electrically identical as Tested Model Number. Each model only has differences in appearance color. Yours Sincerely, Applicant: Botslab Inc. Address: 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware, USA Contact Person: John Derr Tel.: +18663600505 Email: [email protected] Sincerely, Signature:

Page 1 of 6 Report No.: LGT25J170 Appendix - External Photographs of EUT Constructional Details Photo 1 Photo 2 Page 2 of 6 Report No.: LGT25J170 Appendix - External Photographs of EUT Constructional Details Photo 3 Photo 4 Page 3 of 6 Report No.: LGT25J170 Appendix - External Photographs of EUT Constructional Details Photo 5 Photo 6 Page 4 of 6 Report No.: LGT25J170 Appendix - External Photographs of EUT Constructional Details Photo 7 Photo 8 Page 5 of 6 Report No.: LGT25J170 Appendix - External Photographs of EUT Constructional Details Photo 9 Photo 10 Page 6 of 6 Report No.: LGT25J170 Appendix - External Photographs of EUT Constructional Details Photo 11 Photo 12

Label

Page 1 of 7 Report No.: LGT25J170 Appendix - Internal Photographs of EUT Constructional Details Photo 1 Photo 2 Wi-Fi ANT Page 2 of 7 Report No.: LGT25J170 Appendix - Internal Photographs of EUT Constructional Details Photo 3 Photo 4 Page 3 of 7 Report No.: LGT25J170 Appendix - Internal Photographs of EUT Constructional Details Photo 5 Photo 6 Page 4 of 7 Report No.: LGT25J170 Appendix - Internal Photographs of EUT Constructional Details Photo 7 Photo 8 Page 5 of 7 Report No.: LGT25J170 Appendix - Internal Photographs of EUT Constructional Details Photo 9 Photo 10 Page 6 of 7 Report No.: LGT25J170 Appendix - Internal Photographs of EUT Constructional Details Photo 11 Photo 12 Page 7 of 7 Report No.: LGT25J170 Appendix - Internal Photographs of EUT Constructional Details Photo 13

The test report is effective only with both signature and specialized stamp. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report only apply to the tested sample. Shenzhen LGT Test Service Co., Ltd. Tel: 0755-89668180 E-mail:[email protected] Web: www.lgt-cert.com Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Page 1 of 8 EMF TEST REPORT Product Name: Smart Camera Model Number: SC-BE01-M4, SC-BE01-M4-V0, SC-BE01-M4-V1, SC- BE01-M4-V2, SC-BE01-M4-V3, SC-BE01-M4-V4, SC-BE01-M4-V5, SC- BE01-M4-V6, SC-BE01-M4-V7, SC-BE01-M4-V8, SC-BE01-M4-V9 FCC ID: 2A22Z-W101 Issued For : Botslab Inc. 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware, USA Issued By : Shenzhen LGT Test Service Co., Ltd. Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Report Number: LGT25J170HA02 Sample Received Date: Dec. 30, 2025 Date of Test: Dec. 30, 2025 ~ Jan. 28, 2026 Date of Issue: Jan. 28, 2026 Report No.: LGT25J170HA02 Page 2 of 8 TEST REPORT CERTIFICATION Applicant: Botslab Inc. Address: 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware, USA Manufacturer: Botslab Inc. Address: 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware, USA Product Name: Smart Camera Trademark: Botslab Model Number: SC-BE01-M4, SC-BE01-M4-V0, SC-BE01-M4-V1, SC-BE01-M4-V2, SC-BE01-M4-V3, SC-BE01-M4-V4, SC-BE01-M4-V5, SC-BE01-M4- V6, SC-BE01-M4-V7, SC-BE01-M4-V8, SC-BE01-M4-V9 Sample Status: Normal APPLICABLE STANDARDS STANDARD TEST RESULTS FCC 47 CFR §2.1091 KDB 447498 D01 General RF Exposure Guidance v06 PASS Prepared by: Approved by: Zane Shan Vita Li Engineer Technical Director Report No.: LGT25J170HA02 Page 3 of 8 TABLE OF CONTENTS 1 . GENERAL INFORMATION 5 1.1 GENERAL DESCRIPTION OF THE EUT 5 1.2 TEST LABORATORY 5 2 . FCC 47CFR §2.1091 REQUIREMENT 6 2.1 TEST STANDARDS 6 2.2 LIMIT 6 2.3 EUT OPERATION CONDITION 7 2.4 CLASSIFICATION 7 2.5 TEST RESULT 8 Report No.: LGT25J170HA02 Page 4 of 8 Revision History Rev. Issue Date Contents 00 Jan. 28, 2026 Initial Issue Report No.: LGT25J170HA02 Page 5 of 8 1. GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF THE EUT Product Name: Smart Camera Test Model Number: SC-BE01-M4 Series Number: SC-BE01-M4-V0, SC-BE01-M4-V1, SC-BE01-M4-V2, SC-BE01-M4- V3, SC-BE01-M4-V4, SC-BE01-M4-V5, SC-BE01-M4-V6, SC-BE01- M4-V7, SC-BE01-M4-V8, SC-BE01-M4-V9 Model Difference: Each model only has differences in appearance color. Frequency Bands: Bluetooth 2402-2480MHz 2.4G WLAN 802.11b/g/n(20MHz): 2412~2462MHz 802.11n(40MHz):2422~2452MHz 5G WLAN IEEE 802.11a/n(HT20)/ac(VHT20): 5.180GHz-5.240GHz IEEE 802.11n(HT40)/ac(VHT40): 5.190GHz-5.230GHz IEEE 802.11a/n(HT20)/ac(VHT20): 5.745GHz-5.825GHz IEEE 802.11a/n(HT40)/ac(VHT40): 5.755GHz-5.795GHz Adapter: Input: AC 100-240V 50/60Hz 200mA Output: DC 5V 1.2A Hardware Version: B103C-S5R-V1.1 Software Version: B103C-S5R-V1.6.5 1.2 TEST LABORATORY Company Name: Shenzhen LGT Test Service Co., Ltd. Address: Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Accreditation Certificate: FCC Registration No.: 746540 CAB ID: CN0136 Report No.: LGT25J170HA02 Page 6 of 8 2. FCC 47CFR §2.1091 REQUIREMENT 2.1 TEST STANDARDS The limit for Maximum Permissible Exposure (MPE) specified in FCC 1.1310 is followed. The gain of the antennas used in the product is extracted from the Antenna data sheets provided and also the maximum total power input to the antenna is measured. Through the Friis transmission formula and the maximum gain of the antenna, we can calculate the distance, away from the product, where the limit of MPE is reached. Although the Friis Transmission formula is far field assumption, the calculated result of that is an over-prediction for near field power density. It is taken as worst case to specify the safety range. 2.2 LIMIT According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environmental impact of the human exposure to radio-frequency (RF) radiation as specified in 1.1307 (b) Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm²) Limits for Occupational / controlled Exposures 0.3-3.0 614 1.63 *(100) 3.0-30 1842/f 4.89/f *(900/f 2 ) 30-300 61.4 0.163 1.0 300 - 1500 -- -- F/300 1500 – 100000 -- -- 5.0 Limits for General population / Uncontrolled Exposure 0.3-1.34 614 1.63 *(100) 1.34-30 824/f 2.19/f *(180/f 2 ) 30-300 27.5 0.073 0.2 300 - 1500 -- -- F/1500 1500 – 100000 -- -- 1.0 F= Frequency in MHz * = Plane-wave equivalent power density. Friss Formula Friss Transmission Formula: Pd = (Pout * G) / (4*pi*r²) Where Pd = power density in mW/cm² Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = Distance between observation point and the center of radiator in cm If we know the maximum gain of the antenna and the total output power to the antenna, through calculation, we will know MPE value at distance 20cm. Report No.: LGT25J170HA02 Page 7 of 8 2.3 EUT OPERATION CONDITION EUT was enabled to transmit and receive at lowest, middle and highest channels. 2.4 CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. Warning statement to the user for keeping at least 20cm or more separation distance from the antenna should be included in the User manual. So, this device is classified as Mobile device. Report No.: LGT25J170HA02 Page 8 of 8 2.5 TEST RESULT Turn up Result Mode Turn up Power BLE 1M-GFSK 2±1dBm BLE 2M-GFSK 2±1dBm 2.4G WIFI-802.11b 15±1dBm 2.4G WIFI-802.11g 13±1dBm 2.4G WIFI-802.11n(HT20) 13±1dBm 2.4G WIFI-802.1…

Text truncated - open the document above for the full version.

1ShenzhenFeiyuxinElectroniceCo.,Ltd SpecificationForApproval Customer：10108 Partname：IPEX-2.4G/5.8GAntenna-1.13Black-L70MM PartNo：3.03.10010031184 CustomerPartNo：18600000018070 Customerconfirmation ConfirmationcheckApprover Manufacturerrecognition SalesDrafterscheckApprover LuoyiZhengshaojuanYilonghuiLihe Thankyouforgivingusthechancetoapprovesamples.Ifyouagreetopassit,please kindlysenditbacktous. ShenzhenFeiyuxinElectronicsCo.,Ltd Address:No.76,BaotongSouthRoad,XikengIndustrialZone, HenggangTown,LonggangDistrict,Shenzhen,China Telephone：0755-89737230 http://www.fyxdz.com 2ShenzhenFeiyuxinElectroniceCo.,Ltd Catalog 1.Productdimensiondrawing..........................3 2.Productappearance.................................4 3.Antennaperformanceparameters ....................4 4.Cablespecification................................5 5.Environmentalexperiment...........................6-7 6.Standingwaveratioofantenna.....................8-10 Modificationrecord EditionDateNgineerModification A02026-1-24ZHENGSHAOJUANNEW 3ShenzhenFeiyuxinElectroniceCo.,Ltd 1. Productdimensiondrawing 4ShenzhenFeiyuxinElectroniceCo.,Ltd 2. Productappearance SizeL38.25*9.14*0.2mmConnectortypeIPEX IronpartscolourBlackCableRG1.13L70MM 3.Antennaperformanceparameters ItemsSpecificationsunit CenterFrequency 2400～2500/5150～5850MHz Outputimpedance50Ω V.S.W.R≤2.0—— Gain4±1dBi PolarizationmodeLinearpolarization Radiationdirection omnidirectional Maximuminputpower5W workingtemperature -40～+70 °C Storagetemperature -40～+70 °C 5ShenzhenFeiyuxinElectroniceCo.,Ltd 4. Cablespecification 1.13Structurechart Structureparameter MaterialScience(mm)Diameter 1.InnerconductorTinnedcopperwire7/0.08±0.02 2.InsulatorFEP0.66±0.02 3.OuterconductorTinnedcopperwire0.88±0.05 4.SheathFEP1.13±0.05 Electricperformanceparameters (pF/m)Capacitance96±3 Imped(ohm) 50 (%)Rate66 （mm）Bendingradius≤7 (VMS)Maximumworkingvoltage1000 （MHz）Maximumoperatingfrequency6000 (°C)Operatingtemperaturerange-40TO+80 Attenuation （MHz）(≯dB/m) 1000.42 4000.58 10002.20 20003.40 30004.20 40004.50 50005.20 60005.60 6ShenzhenFeiyuxinElectroniceCo.,Ltd 5.Environmentalexperiment Environmentaltestreport 5.1Highlowtemperatureandconstanthumiditytest ItemsHightemperature,lowtemperatureandconstanthumiditytest Testing equipmen t Alternatingconstanttemperatureandhumiditytestchamber Inspecti on standard 1.Thecoatingonthemetalsurfaceshallbefreeofpeeling,cracking, wrinklingandotherdefects;thenon-metalpartshallnothave discoloration,cracking,deformation,degummingandotherphenomena. TestnameTestitemsrequire ment testmethodResult judgment High temperat uretest Temperature(°C) Testsample temperaturetime(H) Recoverytime(H) 70±3°C 12H 1H Testprocedure: a)Putthetestpieceintothe testchamber,andthenadjust thetemperatureofthehigh temperaturechamberto75°C± 3°C,andmonitorthetime. b)Afterthetest,itwasplaced atroomtemperaturefor1hour forroutineinspection. OK Low temperat uretest Temperature(°C) Testsample temperaturetime(H) Recoverytime(H) -40±3 12H 1H Testprocedure: a)Putthetestedpartintothe testchamber,andthenadjust thetemperatureofthelow temperaturechamberto-40°C± 3°C,andmonitorthetime. b)Placeatroomtemperaturefor 1houraftertestforroutine inspection. OK Constant dampheat test Temperature(°C) Testsample temperaturetime(H) Testduration(H) Recoverytime(H) 40±3°C 70-85% 24H 1H a)Putthetestedobjectintothe testchamber,thenadjustthe temperatureofthetestchamber to+40°C±3°C,thehumidity to90-95%,andmonitorthetime. b)Afterthetest,itwasplaced atroomtemperaturefor1hour forroutineinspection. OK Identifyingperson:GuoguangfenGivepermissionto：Xiezhoujun 5.2Saltspraytest ItemsSaltspraytest Testing equipmen t Saltspraytester 7ShenzhenFeiyuxinElectroniceCo.,Ltd Inspecti on standard 1.Thecoatingonthemetalsurfaceshallnotfalloff;theappearanceshall befreeofrust,corrosion,oxidationandotheradversephenomena. Testname ItemsrequirementtestmethodResult judgment Salt spray test 1.NaCl concentration: 2.Airpressure: 3.PHvalue: 4.sprayvolume: 5.Saltwatertest temperaturesetting a.Laboratory temperature: b.Pressuretank temperature: 6.Testtime: 40-60g/1kg 1.0±0.01kgf㎡ 6.5-7.2 1.0-2.0ml/80c/h。 35±1°C 47±1°C 24H Testprocedure: a)Adjustthesalt spraytesterto relevanttest conditions. b)Putthetestpiece intothesaltspray testingmachinefor 24hours.Afterthe test,rinsewith cleanwater,visually inspectthe appearanceofthe testedparts,and carryoutroutine inspection. OK Identifyingperson:GuoguangfenGivepermissionto：Xiezhoujun 8ShenzhenFeiyuxinElectroniceCo.,Ltd 6.Antennaperformancetest Freqency(MHz ) Gain(dBi ) Efficiency(% ) Freqency(MHz ) Gain(dBi ) Efficiency(% ) 24003.7554.951502.3245.68 24103.4155.2552002.4848.23 24203.4753.6752502.1748.69 24303.4553.7953002.0247.81 24403.1752.4853502.9448.55 24503.6451.3754003.1749.93 24603.4750.4454503.2549.69 24703.9947.5755002.950.64 24803.7546.2155502.7252.13 24903.6445.2656003.3355.41 25003.5543.7156502.5954.31 57002.8352 57503.3353.79 58003.4252.16 58503.1754.06 9ShenzhenFeiyuxinElectroniceCo.,Ltd 2400MHZ 2450MHZ 2500MHZ 10ShenzhenFeiyuxinElectroniceCo.,Ltd 5150MHZ 5500MHZ 5850MHZ

The test report is effective only with both signature and specialized stamp. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report only apply to the tested sample. Shenzhen LGT Test Service Co., Ltd. Tel: 0755-89668180 E-mail:[email protected] Web: www.lgt-cert.com Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Page 1 of 56 RF TEST REPORT Product Name: Smart Camera Model Number: SC-BE01-M4, SC-BE01-M4-V0, SC-BE01-M4-V1, SC-BE01-M4-V2, SC-BE01-M4-V3, SC-BE01-M4-V4, SC-BE01-M4-V5, SC-BE01-M4-V6, SC-BE01-M4-V7, SC-BE01-M4-V8, SC-BE01-M4-V9 FCC ID: 2A22Z-W101 Issued For : Botslab Inc. 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware, USA Issued By : Shenzhen LGT Test Service Co., Ltd. Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Report Number: LGT25J170RF05 Sample Received Date: Dec. 30, 2025 Date of Test: Dec. 30, 2025 ~ Jan. 28, 2026 Date of Issue: Jan. 28, 2026 Report No.: LGT25J170RF05 Page 2 of 56 TEST REPORT CERTIFICATION Applicant: Botslab Inc. Address: 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware, USA Manufacturer: Botslab Inc. Address: 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware, USA Product Name: Smart Camera Trademark: Botslab Model Number: SC-BE01-M4, SC-BE01-M4-V0, SC-BE01-M4-V1, SC-BE01-M4-V2, SC-BE01-M4-V3, SC-BE01-M4-V4, SC-BE01-M4-V5, SC-BE01-M4-V6, SC-BE01-M4-V7, SC-BE01-M4-V8, SC-BE01-M4-V9 Sample Status: Normal APPLICABLE STANDARDS STANDARD TEST RESULTS FCC Part 15.247, Subpart C ANSI C63.10-2020 PASS Prepared by: Approved by: Zane Shan Vita Li Engineer Technical Director Report No.: LGT25J170RF05 Page 3 of 56 Table of Contents Page 1. SUMMARY OF TEST RESULTS 6 1.1 TEST LABORATORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF THE EUT 8 2.2 DESCRIPTION OF THE TEST MODES 9 2.3 TEST SOFTWARE AND POWER LEVEL 9 2.4 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 10 2.5 EQUIPMENTS LIST 11 3. EMC EMISSION TEST 13 3.1 CONDUCTED EMISSION MEASUREMENT 13 3.2 TEST PROCEDURE 14 3.3 TEST SETUP 14 3.4 EUT OPERATING CONDITIONS 14 3.5 TEST RESULTS 15 4. RADIATED EMISSION MEASUREMENT 17 4.1 RADIATED EMISSION LIMITS 17 4.2 TEST PROCEDURE 19 4.3 TEST SETUP 19 4.4 EUT OPERATING CONDITIONS 20 4.5 FIELD STRENGTH CALCULATION 20 4.6 TEST RESULTS (BAND EDGE REQUIREMENTS) 25 5. CONDUCTED SPURIOUS & BAND EDGE EMISSION 27 5.1 LIMIT 27 5.2 TEST PROCEDURE 27 5.3 TEST SETUP 27 5.4 EUT OPERATION CONDITIONS 27 5.5 TEST RESULTS 27 6. POWER SPECTRAL DENSITY TEST 28 6.1 LIMIT 28 6.2 TEST PROCEDURE 28 6.3 TEST SETUP 28 6.4 EUT OPERATION CONDITIONS 28 Report No.: LGT25J170RF05 Page 4 of 56 6.5 TEST RESULTS 28 7. BANDWIDTH TEST 29 7.1 LIMIT 29 7.2 TEST PROCEDURE 29 7.3 TEST SETUP 29 7.4 EUT OPERATION CONDITIONS 29 7.5 TEST RESULTS 29 8. PEAK OUTPUT POWER TEST 30 8.1 LIMIT 30 8.2 TEST PROCEDURE 30 8.3 TEST SETUP 30 8.4 EUT OPERATION CONDITIONS 30 8.5 TEST RESULTS 30 9. ANTENNA REQUIREMENT 31 9.1 STANDARD REQUIREMENT 31 9.2 EUT ANTENNA 31 APPENDIX I - TEST RESULTS 32 DUTY CYCLE 32 MAXIMUM PEAK CONDUCTED OUTPUT POWER 35 -6DB BANDWIDTH 38 OCCUPIED CHANNEL BANDWIDTH 41 MAXIMUM POWER SPECTRAL DENSITY LEVEL 44 BAND EDGE 47 CONDUCTED RF SPURIOUS EMISSION 51 APPENDIX II - MEASUREMENT PHOTOS 56 Report No.: LGT25J170RF05 Page 5 of 56 Revision History Rev. Issue Date Revisions 00 Jan. 28, 2026 Initial Issue Report No.: LGT25J170RF05 Page 6 of 56 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: KDB 558074 D01 Part 15.247 Meas Guidance v05r02. FCC Part 15.247, Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS -- 15.247 (a)(2) 6dB Bandwidth PASS -- 15.247 (b)(3) Output Power PASS -- 15.209 Radiated Spurious Emission PASS -- 15.247 (d) Conducted Spurious & Band Edge Emission PASS -- 15.247 (e) Power Spectral Density PASS -- 15.205 Restricted Band Edge Emission PASS -- Part 15.247(d)/ Part 15.209(a) Band Edge Emission PASS -- 15.203 Antenna Requirement PASS -- NOTE: (1) ‘N/A’ denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2020. Report No.: LGT25J170RF05 Page 7 of 56 1.1 TEST LABORATORY Company Name: Shenzhen LGT Test Service Co., Ltd. Address: Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Accreditation Certificate: FCC Registration No.: 746540 CAB ID: CN0136 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 Occupied Channel Bandwidth ±0.46% 2 RF Output Power, Conducted ±0.71dB 3 Power Spectral Density, Conducted ±1.57dB 4 Unwanted Emission, Conducted ±0.63dB 5 Conducted emission ±2.80dB 6 All Emissions, Radiated (0.009-30MHz) ±2.16dB 7 All Emissions, Radiated (30MHz-1GHz) ±4.61dB 8 All Emissions, Radiated (1GHz-18GHz) ±5.49dB 9 Temperature ±0.5°C 10 Humidity ±2% 11 Duty Cycle ±2.3% Note: The measurement uncertainty is not included in the test result. Report No.: LGT25J170RF05 Page 8 of 56 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF THE EUT Product Name: Smart Camera Test Model Number: SC-BE01-M4 Series Number: SC-BE01-M4-V0, SC-BE01-M4-V1, SC-BE01-M4-V2, SC-BE01-M4-V3, SC-BE01-M4-V4, SC-BE01-M4-V5, SC-BE01-M4-V6, SC-BE01-M4-V7, SC-BE01-M4-V8, SC-BE01-M4-V9 Model Difference: Each model only has differences in appearance color. Product Description: Operation Frequency: 2402~2480 MHz Modulation Type: GFSK Radio Technology: BLE Bluetooth Configuration: BLE (1M PHY, 2M PHY) Number Of Channel: 40 Antenna Designation:…

Text truncated - open the document above for the full version.

The test report is effective only with both signature and specialized stamp. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report only apply to the tested sample. Shenzhen LGT Test Service Co., Ltd. Tel: 0755-89668180 E-mail:[email protected] Web: www.lgt-cert.com Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Page 1 of 70 RF TEST REPORT Product Name: Smart Camera Model Number: SC-BE01-M4, SC-BE01-M4-V0, SC-BE01-M4-V1, SC-BE01-M4-V2, SC-BE01-M4-V3, SC-BE01-M4-V4, SC-BE01-M4-V5, SC-BE01-M4-V6, SC-BE01-M4-V7, SC-BE01-M4-V8, SC-BE01-M4-V9 FCC ID: 2A22Z-W101 Issued For : Botslab Inc. 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware, USA Issued By : Shenzhen LGT Test Service Co., Ltd. Room 205, Building 13, Zone B, Zhenxiong Industrial Park, No.177, Renmin West Road, Jinsha, Kengzi Street, Pingshan District, Shenzhen, Guangdong, China Report Number: LGT25J170RF06 Sample Received Date: Dec. 30, 2025 Date of Test: Dec. 30, 2025 ~ Jan. 28, 2026 Date of Issue: Jan. 28, 2026 Report No.: LGT25J170RF06 Page 2 of 70 TEST REPORT CERTIFICATION Applicant: Botslab Inc. Address: 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware, USA Manufacturer: Botslab Inc. Address: 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware, USA Product Name: Smart Camera Trademark: Botslab Model Number: SC-BE01-M4, SC-BE01-M4-V0, SC-BE01-M4-V1, SC-BE01-M4-V2, SC-BE01-M4-V3, SC-BE01-M4-V4, SC-BE01-M4-V5, SC-BE01-M4-V6, SC-BE01-M4-V7, SC-BE01-M4-V8, SC-BE01-M4-V9 Sample Status: Normal APPLICABLE STANDARDS STANDARD TEST RESULTS FCC Part 15.247, Subpart C ANSI C63.10-2020 PASS Prepared by: Approved by: Zane Shan Vita Li Engineer Technical Director Report No.: LGT25J170RF06 Page 3 of 70 Table of Contents Page 1. SUMMARY OF TEST RESULTS 6 1.1 TEST LABORATORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF THE EUT 8 2.2 DESCRIPTION OF THE TEST MODES 10 2.3 TEST SOFTWARE AND POWER LEVEL 10 2.4 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 11 2.5 EQUIPMENTS LIST FOR ALL TEST ITEMS 12 3. EMC EMISSION TEST 14 3.1 CONDUCTED EMISSION MEASUREMENT 14 3.2 RADIATED EMISSION MEASUREMENT 18 4. CONDUCTED SPURIOUS & BAND EDGE EMISSION 28 4.1 LIMIT 28 4.2 TEST PROCEDURE 28 4.3 DEVIATION FROM STANDARD 28 4.4 TEST SETUP 28 4.5 EUT OPERATION CONDITIONS 28 4.6 TEST RESULTS 28 5. POWER SPECTRAL DENSITY TEST 29 5.1 LIMIT 29 5.2 TEST PROCEDURE 29 5.3 DEVIATION FROM STANDARD 29 5.4 TEST SETUP 29 5.5 EUT OPERATION CONDITIONS 29 5.6 TEST RESULTS 29 6. BANDWIDTH TEST 30 6.1 LIMIT 30 6.2 TEST PROCEDURE 30 6.3 DEVIATI…

Text truncated - open the document above for the full version.