2A22Z-W314Botslab PT 4G LTE Cellular Camera

Project No.: 2308C213 Page 1 of 16 ATTACHMENT PHOTOGRAPHS OF EUT Project No.: 2308C213 Page 2 of 16 Project No.: 2308C213 Page 3 of 16

Project No.: 2308C213 Page 4 of 16 WWAN Main Ant. WWAN Aux Ant. Project No.: 2308C213 Page 5 of 16 Project No.: 2308C213 Page 6 of 16 Project No.: 2308C213 Page 7 of 16 Project No.: 2308C213 Page 8 of 16 Project No.: 2308C213 Page 9 of 16 Project No.: 2308C213 Page 10 of 16 Project No.: 2308C213 Page 11 of 16 Project No.: 2308C213 Page 12 of 16 Project No.: 2308C213 Page 13 of 16 Project No.: 2308C213 Page 14 of 16 Project No.: 2308C213 Page 15 of 16 Project No.: 2308C213 Page 16 of 16

Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: Test report no.: CN23AZPG 002 Auftrags-Nr.: Order no.: 168443305 Seite 1 von 14 Page 1 of 14 Kunden-Referenz-Nr.: Client reference no.: N/A Auftragsdatum: Order date: 2023-09-11 Auftraggeber: Client: Botslab,Inc. 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware, USA Prüfgegenstand: Test item: Botslab PT 4G LTE Cellular Camera Bezeichnung / Typ-Nr.: Identification / Type no.: FCC:W314, W314lite, W314pro, W314s IC:W314 (Trademark: Botslab) Auftrags-Inhalt: Order content: Test Report Prüfgrundlage: Test specification: 47 CFR FCC Part 2.1091 RSS-102 Issue 5 Wareneingangsdatum: Date of sample receipt: 2023-09-12 Please refer to Photo Document Prüfmuster-Nr.: Test sample no: A003560228-001~003 Prüfzeitraum: Testing period: 2023-09-13 - 2023-09-19 Ort der Prüfung: Place of testing: TÜV Rheinland (Shenzhen) Co., Ltd. Prüflaboratorium: Testing laboratory: TÜV Rheinland (Shenzhen) Co., Ltd. Prüfergebnis*: Test result*: Pass geprüft von: tested by: X Signed by: Chris Chen genehmigt von: authorized by: X Signed by: Lin Lin Datum: Date: 2023-12-20 Ausstellungsdatum: Issue date: 2023-12-20 Stellung / Position: Department Manager Stellung / Position: Reviewer Sonstiges / Other: FCC ID: 2A22Z-W314 IC: 27673-W314, HVIN: W314 Zustand des Prüfgegenstandes bei Anlieferung: Condition of the test item at delivery: Prüfmuster vollständig und unbeschädigt Test item complete and undamaged * Legende: P(ass) = entspricht o.g. Prüfgrundlage(n) F(ail) = entspricht nicht o.g. Prüfgrundlage(n) N/A = nicht anwendbar N/T = nicht getestet * Legend: P(ass) = passed a.m. test specification(s) F(ail) = failed a.m. test specification(s) N/A = not applicable N/T = not tested Dieser Prüfbericht bezieht sich nur auf das o.g. Prüfmuster und darf ohne Genehmigung der Prüfstelle nicht auszugsweise vervielfältigt werden. Dieser Bericht berechtigt nicht zur Verwendung eines Prüfzeichens. This test report only relates to the above mentioned test sample. Without permission of the test center this test report is not permitted to be duplicated in extracts. This test report does not entitle to carry any test mark. TUV Rheinland (Shenzhen) Co., Ltd., 1601-1604, 17-18F, Tower A Building 2, Shenzhen International Innovation Valley, Dashi 1st Road, Xili Street, Xili Community, Nanshan District, Shenzhen 518052, P. R. China Mail: [email protected] · Web: www.tuv.com Prüfbericht - Produkte Test Report - Products Prüfbericht-Nr.: CN23AZPG 002 Test report no.: Seite 2 von 14 Page 2 of 14 Anmerkungen Remarks 1 Alle eingesetzten Prüfmittel waren zum angegebenen Prüfzeitraum gemäß eines festgelegten Kalibrierungsprogramms unseres Prüfhauses kalibriert. Sie entsprechen den in den Prüfprogrammen hinterlegten Anforderungen. Die Rückverfolgbarkeit der eingesetzten Prüfmittel ist durch die Einhaltung der Regelungen unseres Managementsystems gegeben. Detaillierte Informationen bezüglich Prüfkonditionen, Prüfequipment und Messunsicherheiten sind im Prüflabor vorhanden und können auf Wunsch bereitgestellt werden. The equipment used during the specified testing period was calibrated according to our test laboratory calibration program. The equipment fulfils the requirements included in the relevant standards. The traceability of the test equipment used is ensured by compliance with the regulations of our management system. Detailed information regarding test conditions, equipment and measurement uncertainty is available in the test laboratory and could be provided on request. 2 Wie vertraglich vereinbart, wurde dieses Dokument nur digital unterzeichnet. Der TÜV Rheinland hat nicht überprüft, welche rechtlichen oder sonstigen diesbezüglichen Anforderungen für dieses Dokument gelten. Diese Überprüfung liegt in der Verantwortung des Benutzers dieses Dokuments. Auf Verlangen des Kunden kann der TÜV Rheinland die Gültigkeit der digitalen Signatur durch ein gesondertes Dokument bestätigen. Diese Anfrage ist an unseren Vertrieb zu richten. Eine Umweltgebühr für einen solchen zusätzlichen Service wird erhoben. As contractually agreed, this document has been signed digitally only. TUV Rheinland has not verified and unable to verify which legal or other pertaining requirements are applicable for this document. Such verification is within the responsibility of the user of this document. Upon request by its client, TUV Rheinland can confirm the validity of the digital signature by a separate document. Such request shall be addressed to our Sales department. An environmental fee for such additional service will be charged. 3 Prüfklausel mit der Note * wurden an qualifizierte Unterauftragnehmer vergeben und sind unter der jeweiligen Prüfklausel des Berichts beschrieben. Abweichungen von Prüfspezifikation(en) oder Kundenanforderungen sind in der jeweiligen Prüfklausel im Bericht aufgeführt. Test clauses with remark of * are subcontracted to qualified subcontractors and descripted under the respective test clause in the report. Deviations of testing specification(s) or customer requirements are listed in specific test clause in the report. 4 Die Entscheidungsregel für Konformitätserklärungen basierend auf numerischen Messergebnisen in diesem Prüfbericht basiert auf der "Null-Grenzwert-Regel" und der "Einfachen Akzeptanz" gemäß ILAC G8:2019 und IEC Guide 115:2021, es sei denn, in der auf Seite 1 dieses Berichts genannten angewandten Norm ist etwas anderes festgelegt oder vom Kunden gewünscht. Dies bedeutet, dass die Messunsicherheit nicht berücksichtigt wird und daher auch nicht im Prüfbericht angegeben wird. Zu weiteren Informationen bezueglich des Risikos durch diese Entscheidungsregel siehe ILAC G8:2019. The decision rule for statements of conformity, based on numerical measurement results, in this test report is based on the “Zero Guard Band Rule” and “Simple Acceptance” in accordance with ILAC G8:2019 and IEC Guide 115:2021, unless otherwise specified in the applied standard mentioned o…

Text truncated - open the document above for the full version.

Rep ort No.: BTL-FCCP-1-2308C213 Page 1 of 24 FCC Radio Test Report FCC ID: 2A22Z-W314 This repor t concerns: Original Grant Project No. : 2308C213 Equipment : Botslab PT 4G LTE Cellular Camera Brand Name : Botslab Test Model : W314 Series Model : W314lite, W314pro, W314s Applicant : Botslab,Inc. Address : 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware, USA Manufacturer : Botslab,Inc. Address : 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware, USA Date of Receipt : Dec. 01, 2023 Date of Test : Dec. 19, 2023 ~ Dec. 21, 2023 Issued Date : Dec. 26, 2023 Report Version : R00 Test Sample : Engineering Sample No.: DG20231201107 Standard(s) : 47 CFR FCC Part 22 Subpart H 47 CFR FCC Part 2 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Edward Li Approv ed by : Steven Lu Room 108, Building 2, No. 1, Yile Road, Songshan Lake Zone, Dongguan City, Guangdong 523000 China. Tel: +86-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-1-2308C213 Page 2 of 24 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025: 2017 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-1-2308C213 Page 3 of 24 Table of Contents Page REPORT ISSUED HISTORY 4 1 . APPLICABLE STANDARDS 5 2 . SUMMARY OF TEST RESULTS 5 2.1 TEST FACILITY 6 2.2 MEASUREMENT UNCERTAINTY 6 2.3 TEST ENVIRONMENT CONDITIONS 6 3 . GENERAL INFORMATION 7 3.1 GENERAL DESCRIPTION OF EUT 7 3.2 DESCRIPTION OF TEST MODES 9 3.3 BLOCK DIGRAM SHOWING THE CONFIGURATIONOFSYSTEMTESTED 10 3.4 DESCRIPTION OF SUPPORT UNITS 10 4 . TEST RESULT 11 4.1 RADIATED SPURIOUS EMISSIONS MEASUREMENT 11 4.1.1 LIMIT 11 4.1.2 TEST PROCEDURES 11 4.1.3 TEST SETUP LAYOUT 11 4.1.4 TEST DEVIATION 12 4.1.5 TEST RESULTS (9KHZ TO 30MHZ) 12 4.1.6 TEST RESULTS (30MHZ TO 1000MHZ) 12 4.1.7 TEST RESULTS (ABOVE 1000MHZ) 12 5. LIST OF MEASUREMENT EQUIPMENTS 13 6. EUT TEST PHOTO 14 APPENDIX A - RADIATED SPURIOUS EMISSIONS (9KHZ TO 30MHZ) 17 APPENDIX B - RADIATED SPURIOUS EMISSIONS (30MHZ TO 1000MHZ) 19 APPENDIX C - RADIATED SPURIOUS EMISSIONS (ABOVE 1000MHZ) 22 Report No.: BTL-FCCP-1-2308C213 Page 4 of 24 REPORT ISSUED HISTORY Report No. Version Description Issued Date Note BTL-FCCP-1-2308C213 R00 Original Report. Dec. 26, 2023 Valid Report No.: BTL-FCCP-1-2308C213 Page 5 of 24 1. APPLICABLE STANDARDS According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards: ANSI C63.26-2015 The following reference test guidance is not within the scope of accreditation of NVLAP: ANSI/TIA/EIA-603-E-2016 KDB 971168 D01 Power Meas License Digital Systems v03r01 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC Part 22 Subpart H & Part 2 Standard(s) Section Test Item Judgment Remark 2.1046 Output Power PASS Note (2) 22.913(a)(5) Effective Radiated Power PASS Note (2) 2.1049 Occupied Bandwidth PASS Note (2) 2.1051 22.917(a) Conducted Spurious Emissions PASS Note (2) 2.1053 22.917(a) Radiated Spurious Emissions PASS ------ 22.917(a) Band Edge Measurements PASS Note (2) 22.913(d) Peak To Average Ratio PASS Note (2) 2.1055 22.355 Frequency Stability PASS Note (2) Note: (1) “N/A” denotes test is not applicable in this test report. (2) The test results please refer to the test report No: CN23AZPG 001. Report No.: BTL-FCCP-1-2308C213 Page 6 of 24 2.1 TEST FACILITY The test facilities used to collect the test data in this report is at the location of Room 108, Building 2, No. 1, Yile Road, Songshan Lake Zone, Dongguan City, Guangdong 523000. 2.2 MEASUREMENT UNCERTAINTY ISO/IEC 17025 requires that an estimate of the measurement uncertainties associated with the emissions test results be included in the report. The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2)) The BTL measurement uncertainty as below table: A. Radiated Measurement: Test Site Method Measurement Frequency Range U,(dB) SSL-CB01 CISPR 9kHz ~ 30MHz 2.74 Test Site Method Measurement Frequency Range Ant. H / V U,(dB) SSL-CB01 CISPR 30MHz ~…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-2-2308C213 Page 1 of 24 FCC Radio Test Report FCC ID: 2A22Z-W314 This report concerns: Original Grant Project No. : 2308C213 Equipment : Botslab PT 4G LTE Cellular Camera Brand Name : Botslab Test Model : W314 Series Model : W314lite, W314pro, W314s Applicant : Botslab,Inc. Address : 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware, USA Manufacturer : Botslab,Inc. Address : 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware, USA Date of Receipt : Dec. 01, 2023 Date of Test : Dec. 19, 2023 ~ Dec. 21, 2023 Issued Date : Dec. 26, 2023 Report Version : R00 Test Sample : Engineering Sample No.: DG20231201107 Standard(s) : 47 CFR FCC Part 24 Subpart E 47 CFR FCC Part 2 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Edward Li Approved by : Steven Lu Room 108, Building 2, No. 1, Yile Road, Songshan Lake Zone, Dongguan City, Guangdong 523000 China. Tel: +86-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-2-2308C213 Page 2 of 24 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025: 2017 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-2-2308C213 Page 3 of 24 Table of Contents Page REPORT ISSUED HISTORY 4 1 . APPLICABLE STANDARDS 5 2 . SUMMARY OF TEST RESULTS 5 2.1 TEST FACILITY 6 2.2 MEASUREMENT UNCERTAINTY 6 2.3 TEST ENVIRONMENT CONDITIONS 6 3 . GENERAL INFORMATION 7 3.1 GENERAL DESCRIPTION OF EUT 7 3.2 DESCRIPTION OF TEST MODES 9 3.3 BLOCKDIGRAMSHOWINGTHECONFIGURATIONOFSYSTEMTESTED 10 3.4 DESCRIPTION OF SUPPORT UNITS 10 4 . TEST RESULT 11 4.1 RADIATED SPURIOUS EMISSIONS MEASUREMENT 11 4.1.1 LIMIT 11 4.1.2 TEST PROCEDURES 11 4.1.3 TEST SETUP LAYOUT 11 4.1.4 TEST DEVIATION 12 4.1.5 TEST RESULTS (9KHZ TO 30MHZ) 12 4.1.6 TEST RESULTS (30MHZ TO 1000MHZ) 12 4.1.7 TEST RESULTS (ABOVE 1000MHZ) 12 5. LIST OF MEASUREMENT EQUIPMENTS 13 6. EUT TEST PHOTO 14 APPENDIX A - RADIATED SPURIOUS EMISSIONS (9KHZ TO 30MHZ) 17 APPENDIX B - RADIATED SPURIOUS EMISSIONS (30MHZ TO 1000MHZ) 19 APPENDIX C - RADIATED SPURIOUS EMISSIONS (ABOVE 1000MHZ) 22 Report No.: BTL-FCCP-2-2308C213 Page 4 of 24 REPORT ISSUED HISTORY Report No. Version Description Issued Date Note BTL-FCCP-2-2308C213 R00 Original Report. Dec. 26, 2023 Valid Report No.: BTL-FCCP-2-2308C213 Page 5 of 24 1. APPLICABLE STANDARDS According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards: ANSI C63.26-2015 The following reference test guidance is not within the scope of accreditation of NVLAP: ANSI/TIA/EIA-603-E-2016 KDB 971168 D01 Power Meas License Digital Systems v03r01 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC Part 24 Subpart E & Part 2 Standard(s) Section Test Item Judgment Remark 2.1046 24.232(c) Equivalent Isotropic Radiated Power PASS Note (2) 2.1049 Occupied Bandwidth PASS Note (2) 2.1051 24.238(a) Conducted Spurious Emissions PASS Note (2) 2.1053 24.238(a) Radiated Spurious Emissions PASS ------ 24.238(a) Band Edge Measurements PASS Note (2) 24.232(d) Peak To Average Ratio PASS Note (2) 2.1055 24.235 Frequency Stability PASS Note (2) Note: (1) “N/A” denotes test is not applicable in this test report. (2) The test results please refer to the test report No: CN23AZPG 001. Report No.: BTL-FCCP-2-2308C213 Page 6 of 24 2.1 TEST FACILITY The test facilities used to collect the test data in this report is at the location of Room 108, Building 2, No. 1, Yile Road, Songshan Lake Zone, Dongguan City, Guangdong 523000. 2.2 MEASUREMENT UNCERTAINTY ISO/IEC 17025 requires that an estimate of the measurement uncertainties associated with the emissions test results be included in the report. The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2)) The BTL measurement uncertainty as below table: A. Radiated Measurement: Test Site Method Measurement Frequency Range U,(dB) SSL-CB01 CISPR 9kHz ~ 30MHz 2.74 Test Site Method Measurement Frequency Range Ant. H / V U,(dB) SSL-CB01 CISPR 30MHz ~ 200MHz V 4.70 30MHz ~ 200…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-3-2308C213 Page 1 of 35 FCC Radio Test Report FCC ID: 2A22Z-W314 This report concerns: Original Grant Project No. : 2308C213 Equipment : Botslab PT 4G LTE Cellular Camera Brand Name : Botslab Test Model : W314 Series Model : W314lite, W314pro, W314s Applicant : Botslab,Inc. Address : 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware, USA Manufacturer : Botslab,Inc. Address : 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware, USA Date of Receipt : Dec. 01, 2023 Date of Test : Dec. 19, 2023 ~ Dec. 21, 2023 Issued Date : Dec. 26, 2023 Report Version : R00 Test Sample : Engineering Sample No.: DG20231201107 Standard(s) : 47 CFR FCC Part 27 Subpart L 47 CFR FCC Part 27 Subpart N 47 CFR FCC Part 27 Subpart H 47 CFR FCC Part 27 Subpart F 47 CFR FCC Part 2 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Edward Li Approved by : Steven Lu Room 108, Building 2, No. 1, Yile Road, Songshan Lake Zone, Dongguan City, Guangdong 523000 China. Tel: +86-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-3-2308C213 Page 2 of 35 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025: 2017 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-3-2308C213 Page 3 of 35 Table of Contents Page REPORT ISSUED HISTORY 4 1 . APPLICABLE STANDARDS 5 2 . SUMMARY OF TEST RESULTS 5 2.1 TEST FACILITY 6 2.2 MEASUREMENT UNCERTAINTY 6 2.3 TEST ENVIRONMENT CONDITIONS 6 3 . GENERAL INFORMATION 7 3.1 GENERAL DESCRIPTION OF EUT 7 3.2 DESCRIPTION OF TEST MODES 10 3.3 BLOCK DIGRAM SHOWING THECONFIGURATIONOFSYSTEMTESTED 11 3.4 DESCRIPTION OF SUPPORT UNITS 11 4 . TEST RESULT 12 4.1 RADIATED SPURIOUS EMISSIONS MEASUREMENT 12 4.1.1 LIMIT 12 4.1.2 TEST PROCEDURES 12 4.1.3 TEST SETUP LAYOUT 12 4.1.4 TEST RESULTS (9KHZ TO 30MHZ) 13 4.1.5 TEST RESULTS (30MHZ TO 1000MHZ) 13 4.1.6 TEST RESULTS (ABOVE 1000MHZ) 13 5. LIST OF MEASUREMENT EQUIPMENTS 14 6. EUT TEST PHOTO 15 APPENDIX A - RADIATED SPURIOUS EMISSIONS (9KHZ TO 30MHZ) 18 APPENDIX B - RADIATED SPURIOUS EMISSIONS (30MHZ TO 1GHZ) 20 APPENDIX C - RADIATED SPURIOUS EMISSIONS (ABOVE 1GHZ) 28 Report No.: BTL-FCCP-3-2308C213 Page 4 of 35 REPORT ISSUED HISTORY Report No. Version Description Issued Date Note BTL-FCCP-3-2308C213 R00 Original Report. Dec. 26, 2023 Valid Report No.: BTL-FCCP-3-2308C213 Page 5 of 35 1. APPLICABLE STANDARDS According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards: ANSI C63.26-2015 The following reference test guidance is not within the scope of accreditation of NVLAP: ANSI/TIA/EIA-603-E-2016 KDB 971168 D01 Power Meas License Digital Systems v03r01 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC Part 27 Subpart L, N, H, F & Part 2 Standard(s) Section Test Item Judgment Remark 2.1046 Output Power PASS Note (2) 27.50(d)(4) 27.50(c)(10) 27.50(b)(10) Equivalent Isotropic Radiated Power & Equivalent Radiated Power PASS Note (2) 2.1049 Occupied Bandwidth PASS Note (2) 2.1051 27.53(h) 27.53(g) 27.53(c)(2)(f) Conducted Spurious Emissions PASS Note (2) 2.1053 27.53(h) Radiated Spurious Emissions PASS ------ 2.1051 27.53(h) 27.53(g) 27.53(c)(2)(f) Band Edge Measurements PASS Note (2) 27.50(d)(5) Peak To Average Ratio PASS Note (2) 2.1055 27.54 Frequency Stability PASS Note (2) Note: (1) “N/A” denotes test is not applicable in this test report. (2) The test results please refer to the test report No: CN23AZPG 001. Report No.: BTL-FCCP-3-2308C213 Page 6 of 35 2.1 TEST FACILITY The test facilities used to collect the test data in this report is at the location of Room 108, Building 2, No. 1, Yile Road, Songshan Lake Zone, Dongguan City, Guangdong 523000. 2.2 MEASUREMENT UNCERTAINTY ISO/IEC 17025 requires that an estimate of the measurement uncertainties associated with the emissions test results be included in the report. The measurement uncertainties given below are based on a 95% confidence level (based on a coverage factor (k=2)) The BTL measurement uncertainty as below table: A. Radiated Mea…

Text truncated - open the document above for the full version.

Report No.: BTL-FCCP-4-2308C213 Page 1 of 21 FCC Radio Test Report FCC ID: 2A22Z-W314 This report concerns: Original Grant Project No. : 2308C213 Equipment : Botslab PT 4G LTE Cellular Camera Brand Name : Botslab Test Model : W314 Series Model : W314lite, W314pro, W314s Applicant : Botslab,Inc. Address : 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware, USA Manufacturer : Botslab,Inc. Address : 919 North Market Street, Suite 950, Wilmington, New Castle, Delaware, USA Date of Receipt : Dec. 01, 2023 Date of Test : Dec. 19, 2023 ~ Dec. 21, 2023 Issued Date : Dec. 26, 2023 Report Version : R00 Test Sample : Engineering Sample No.: DG20231201107 Standard(s) : 47 CFR FCC Part 90 Subpart R 47 CFR FCC Part 2 The above equipment has been tested and found compliance with the requirement of the relative standards by BTL Inc. Prepared by : Edward Li Approved by : Steven Lu Room 108, Building 2, No. 1, Yile Road, Songshan Lake Zone, Dongguan City, Guangdong 523000 China. Tel: +86-769-8318-3000 Web: www.newbtl.com Service mail: [email protected] Report No.: BTL-FCCP-4-2308C213 Page 2 of 21 Declaration BTL represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with standards traceable to international standard(s) and/or national standard(s). BTL's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. BTL shall have no liability for any declarations, inferences or generalizations drawn by the client or others from BTL issued reports. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the U.S. Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and ourselves, the test report shall not be reproduced, except in full, without our written approval. BTL’s laboratory quality assurance procedures are in compliance with the ISO/IEC 17025: 2017 requirements, and accredited by the conformity assessment authorities listed in this test report. BTL is not responsible for the sampling stage, so the results only apply to the sample as received. The information, data and test plan are provided by manufacturer which may affect the validity of results, so it is manufacturer’s responsibility to ensure that the apparatus meets the essential requirements of applied standards and in all the possible configurations as representative of its intended use. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Please note that the measurement uncertainty is provided for informational purpose only and are not use in determining the Pass/Fail results. Report No.: BTL-FCCP-4-2308C213 Page 3 of 21 Table of Contents Page REPORT ISSUED HISTORY 4 1 . APPLICABLE STANDARDS 5 2 . SUMMARY OF TEST RESULTS 5 2.1 TEST FACILITY 6 2.2 MEASUREMENT UNCERTAINTY 6 2.3 TEST ENVIRONMENT CONDITIONS 6 3 . GENERAL INFORMATION 7 3.1 GENERAL DESCRIPTION OF EUT 7 3.2 DESCRIPTION OF TEST MODES 8 3.3 BLOCK DIGRAM SHOWING THE CONFIGURATIONOFSYSTEMTESTED 9 3.4 DESCRIPTION OF SUPPORT UNITS 9 4 . TEST RESULT 10 4.1 RADIATED SPURIOUS EMISSIONS MEASUREMENT 10 4.1.1 LIMIT 10 4.1.2 TEST PROCEDURES 10 4.1.3 TEST SETUP LAYOUT 10 4.1.4 TEST DEVIATION 11 4.1.5 TEST RESULTS (9KHZ TO 30MHZ) 11 4.1.6 TEST RESULTS (30MHZ TO 1000MHZ) 11 4.1.7 TEST RESULTS (ABOVE 1000MHZ) 11 5 . LIST OF MEASUREMENT EQUIPMENTS 12 6. EUT TEST PHOTO 13 APPENDIX A - RADIATED SPURIOUS EMISSIONS (9KHZ TO 30MHZ) 16 APPENDIX B - RADIATED SPURIOUS EMISSIONS (30MHZ TO 1000MHZ) 18 APPENDIX C - RADIATED SPURIOUS EMISSIONS (ABOVE 1000MHZ) 20 Report No.: BTL-FCCP-4-2308C213 Page 4 of 21 REPORT ISSUED HISTORY Report No. Version Description Issued Date Note BTL-FCCP-4-2308C213 R00 Original Report. Dec. 26, 2023 Valid Report No.: BTL-FCCP-4-2308C213 Page 5 of 21 1. APPLICABLE STANDARDS According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards: ANSI C63.26-2015 The following reference test guidance is not within the scope of accreditation of NVLAP: ANSI/TIA/EIA-603-E-2016 KDB 971168 D01 Power Meas License Digital Systems v03r01 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standard(s): FCC Part 90 Subpart R & Part 2 Standard(s) Section Test Item Judgment Remark 2.1046 & 90.542 (a)(7) Effective Radiated Power PASS Note (2) 2.1049 Occupied Bandwidth PASS Note (2) 2.1053 & 90.543(e)(3) Conducted Spurious Emissions PASS Note (2) 2.1053 & 90.543(e)(3) & 90.543(f) Radiated Spurious Emissions PASS ------ 2.1051 & 90.210(n) Mask Measurements PASS Note (2) - Peak To Average Ratio PASS Note (2) 2.1053 & 90.543(e)(2)(3) Condcted Band Edge Measurement PASS Note (2) 2.1055 & 90.539(e) Frequency Stability PASS Note (2) Note: (1) “N/A” denotes test is not applicable in this test report. (2) The test results please refer to the test report No: CN23AZPG 001. Report No.: BTL-FCCP-4-2308C213 Page 6 of 21 2.1 TEST FACILITY The test facilitie…

Text truncated - open the document above for the full version.