2A2PN-JS-1PROJump Starter

Covered Equipment Identification Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows: We, applicant Company Name: Ekoo Electronic Co., Ltd Address: B09, Block B, F2, Bldg.B, Runfeng Pioneer Park, No.973, Minzhi Avenue, Minzhi St., Longhua, Shenzhen, China Phone: +86- 755-83748050 certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-07-22 Name / Title: Sara Cheng / Manager Company: Ekoo Electronic Co., Ltd Address: B09, Block B, F2, Bldg.B, Runfeng Pioneer Park, No.973, Minzhi Avenue, Minzhi St., Longhua, Shenzhen, China Phone: +86-755-83748050 Fax Number: N/A E-Mail: [email protected]

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2A2PN-JS-1PRO JS-1 Pro We, applicant Company Name: Ekoo Electronic Co., Ltd Address: B09, Block B, F2, Bldg.B, Runfeng Pioneer Park, No.973, Minzhi Avenue, Minzhi St., Longhua, Shenzhen, China Phone: +86- 755-83748050 certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-07-22 Name / Title: Sara Cheng / Manager Company: Ekoo Electronic Co., Ltd Address: B09, Block B, F2, Bldg.B, Runfeng Pioneer Park, No.973, Minzhi Avenue, Minzhi St., Longhua, Shenzhen, China Phone: +86-755-83748050 Fax Number: N/A E-Mail: [email protected]

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products: FCC ID Model name 2A2PN-JS-1PRO JS-1 Pro For the products listed above, we request permanent confidentiality for all applicable exhibits as there are: • the Operational Description • the Block Diagram • the Schematics • the Part List • the Tune up Information The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2024-07-22 Name / Title: Sara Cheng / Manager Company: Ekoo Electronic Co., Ltd Address: B09, Block B, F2, Bldg.B, Runfeng Pioneer Park, No.973, Minzhi Avenue, Minzhi St., Longhua, Shenzhen, China Phone: +86-755-83748050 Fax Number: N/A E-Mail: [email protected]

Ekoo Electronic Co., Ltd B09, Block B, F2, Bldg.B, Runfeng Pioneer Park, No.973, Minzhi Avenue, Minzhi St., Longhua, Shenzhen, China Date: July 22, 2024 FCC ID: 2A2PN-JS-1PRO Model Number: JS-1 Pro To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Ekoo Electronic Co., Ltd hereby declare that our product (Jump Starter) Model Number: JS-1 Pro meet item 5.2 of KDB 680106v03r01 as follow; Requirements of KDB 680106 D01 Yes / No Description Power transfer frequency is less than 1 MHz Yes The device operates in the frequency range 110.0 KHz – 205. KHz The output power from each transmitting element (e.g., coil) is less than or equal to 15 watts. Yes The maximum output power of each primary coil is 10W. A client device providing the maximum permitted load is placed in physical contact with the transmitter (i.e., the surfaces of the transmitter and client device enclosures need to be in physical contact) Yes Client device is placed directly in contact with the transmitter. Only § 2.1091- Mobile exposure conditions apply (i.e., this provision does not cover § 2.1093-Portable exposure conditions). No Mixed mobile and portable exposure conditions The E-field and H-field strengths, at and beyond 20 cm surrounding the device surface, are demonstrated to be less than 50% of the applicable MPE limit, per KDB 447498, Table 1. These measurements shall be taken along the principal axes of the device, with one axis oriented along the direction of the estimated maximum field strength, and for three points per axis or until a 1/d (inverse distance from the emitter structure) field strength decay is observed. Symmetry considerations may be used for test reduction purposes. The device shall be operated in Yes The E-field and H-field strengths from all simultaneous transmitting coils are demonstrated to less than 50% of the MPE limit. Ekoo Electronic Co., Ltd B09, Block B, F2, Bldg.B, Runfeng Pioneer Park, No.973, Minzhi Avenue, Minzhi St., Longhua, Shenzhen, China documented worst-case compliance scenarios (i.e., the ones that lead to the maximum field components), and while all the radiating structures (e.g., coils or antennas) that by design can simultaneously transmit are energized at their nominal maximum power. For systems with more than one radiating structure, the conditions specified in (5) must be met when the system is fully loaded (i.e., clients absorbing maximum power available), and with all the radiating structures operating at maximum power at the same time, as per design conditions. If the design allows one or more radiating structures to be powered at a higher level while other radiating structures are not powered, then those cases must be tested as well. For instance, a device may use three RF coils powered at 5 W, or one coil powered at 15 W: in this case, both scenarios shall be tested Yes Only one radiating structure and tested at maximum Output Power Please contact me if you have any question. Sincerely, (Signed) Name/Title: Sara Cheng / Manager Company: Ekoo Electronic Co., Ltd Address: B09, Block B, F2, Bldg.B, Runfeng Pioneer Park, No.973, Minzhi Avenue, Minzhi St., Longhua, Shenzhen, China Tel: +86-755-83748050 Fax: N/A E-Mail: [email protected]

Page 1 of 4 FCC ID: 2A2PN-JS-1PRO Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity EXTERIOR PHOTOGRAPHS Fig. 1 Fig. 2 Page 2 of 4 FCC ID: 2A2PN-JS-1PRO Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 4 FCC ID: 2A2PN-JS-1PRO Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6 Page 4 of 4 FCC ID: 2A2PN-JS-1PRO Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 7 Fig. 8

Page 1 of 1 FCC ID: 2A2PN-JS-1PRO Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity LABEL AND LOCATION (Size: L 6.0cm x W 6.0cm) Label Location Jump Starter Model: JS-1 Pro FCC ID: 2A2PN-JS-1PRO

Page 1 of 5 FCC ID: 2A2PN-JS-1PRO Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity INTERIOR PHOTOGRAPHS Fig. 1 Fig. 2 Page 2 of 5 FCC ID: 2A2PN-JS-1PRO Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 5 FCC ID: 2A2PN-JS-1PRO Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6 Coil Antenna Page 4 of 5 FCC ID: 2A2PN-JS-1PRO Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 7 Fig. 8 Page 5 of 5 FCC ID: 2A2PN-JS-1PRO Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 9

Page 1 of 21 FCC ID: 2A2PN-JS-1PRO Report No.: LCSA06274029EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add:101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT For Ekoo Electronic Co., Ltd Jump Starter Test Model: JS-1 Pro Prepared for : Ekoo Electronic Co., Ltd Address : B09, Block B, F2, Bldg.B, Runfeng Pioneer Park, No.973, Minzhi Avenue, Minzhi St., Longhua, Shenzhen, CHINA 518000 Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Shajing Street, Baoan District, Shenzhen, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : June 27, 2024 Number of tested samples : 2 Sample No. : A240626091-1(Engineer sample), A240626091-2(Normal sample) Date of Test : June 27, 2024 ~ July 09, 2024 Date of Report : July 10, 2024 Page 2 of 21 FCC ID: 2A2PN-JS-1PRO Report No.: LCSA06274029EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add:101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT KDB 680106 D01 Wireless Power Transfer v04 Report Reference No. ..................... : LCSA06274029EB Date of Issue ........................................ : July 10, 2024 Testing Laboratory Name .................. : Shenzhen LCS Compliance Testing Laboratory Ltd. Address ................................................ : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Shajing Street, Baoan District, Shenzhen, China Testing Location/ Procedure ................ : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ............................. : Ekoo Electronic Co., Ltd Address ................................................ : B09, Block B, F2, Bldg.B, Runfeng Pioneer Park, No.973, Minzhi Avenue, Minzhi St., Longhua, Shenzhen, CHINA 518000 Test Specification Standard ............................................... : FCC CFR 47 PART 1, § 1.1310 KDB 680106 D01 Wireless Power Transfer v04 Test Report Form No. ....................... : LCSEMC-1.0 TRF Originator ...................................... : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF ........................................... : Dated 2023-12 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. EUT Description. ............................... : Jump Starter Trade Mark........................................... : N/A Test Model ........................................... : JS-1 Pro Ratings ................................................. : Capacity: 59.2Wh, 14.8V USB-C Input: 5V2A, 9V2A USB1 Output: 5V3A, 9V2A, 12V1.5A USB2 Output: 5V2.1A Wireless Charger: 10W Result ................................................. : Positive Compiled by: Supervised by: Approved by: Nadia Zhou/ Administrator Cary Luo/ Technique principal Gavin Liang/ Manager Page 3 of 21 FCC ID: 2A2PN-JS-1PRO Report No.: LCSA06274029EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add:101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity ISED -- TEST REPORT Test Model............................... : JS-1 Pro EUT......................................... : Jump Starter Applicant............................... : Ekoo Electronic Co., Ltd Address.................................. : B09, Block B, F2, Bldg.B, Runfeng Pioneer Park, No.973, Minzhi Avenue, Minzhi St., Longhua, Shenzhen, CHINA 518000 Telephone............................... : Fax.......................................... : Manufacturer........................ : / Address................................... : / Telephone............................... : Fax.......................................... : Factory................................... : / Address................................... : / Telephone............................... : Fax.......................................... : Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCSA06274029EB July 10, 2024 Date of issue Page 4 of 21 FCC ID: 2A2PN-JS-1PRO Report No.: LCSA06274029EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add:101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Revision History Revision Issue Date Revisions Revised By 000 July 10, 2024 Initial Issue -- Page 5 of 21 FCC ID: 2A2PN-JS-1PRO Report No.: LCSA06274029EB Shenzhen LCS Compliance Testing Laboratory Ltd. Add:101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity TABLE OF CONTENTS 1. GENERAL INFORMATION ........…

Text truncated - open the document above for the full version.

深圳市宸兴电子技术有限公司 Shenzhen Chenxing Electronic Technology Co,Ltd. 第 1 页 产 品 规 格 书 PRODUCT SPECIFICATION FOR APPROVAL 客 户 名 称： CUSTOMER 航车宝 产 品 名 称： PRODUCT NAME Power Transmitter A11 物 料 编 码： PART No. HXX01 产 品 规 格： PRODUCT SPEC Inductance Spec: 6.5uH±10% Shielding spec:43.5*5.3*1 with two grooves Silk covered wire spec： 2 UEW/155 0.07*100*10Ts Segment Length：60mm Double side Type（front side + back side） 日 期： DATE 2024/07/19 版 本 型 号： VERSION REV 1.0 版本 Revision 变更内容 Modified Content 责任人 Principle 日期 Date 备注 Note REV 1.0 首次发布 薛 磊 2024-07-19 制定/PREPARED BY 审核/CHECKED BY 核准/APPROVED BY 李小云 周小菊 客户认可签名及盖章 Authorized signature & company chop 附上的是产品规格书，有任何疑问，请及时反馈给我们，谢谢! Shenzhen Chenxing Electronic Technology Co., Ltd. 5th Floor, Building 1, Xinkecheng Technology Industrial Park, No. 51 Dabao Road, Xin'an Street, Bao'an District, Shenzhen, China 深圳市宸兴电子技术有限公司 Shenzhen Chenxing Electronic Technology Co,Ltd. 第 2 页 产 品 规 格 SPECIFICATION 一、Mechanical Specification: Shielding Outer Diameter(A) 43.5±0.5mm Shielding Inner Diameter(G) 5±0.3mm Coil Outer Diameter （B） 40±1mm Coil Inner Diameter （C） 20.5±0.5mm Total Thickness（D） <2.1mm Segment Length（E） 60mm±3mm Pin Length（F） 3±1mm Shielding Thickness 0.95±0.05mm Shielding Shape Circle with two grooves Adhesive Tape Double side Type （front side + back side） Shenzhen Chenxing Electronic Technology Co., Ltd. 5th Floor, Building 1, Xinkecheng Technology Industrial Park, No. 51 Dabao Road, Xin'an Street, Bao'an District, Shenzhen, China 深圳市宸兴电子技术有限公司 Shenzhen Chenxing Electronic Technology Co,Ltd. 第 3 页 二、Schematic: 三、Coil Parameter: 端子 TERMINAL 线径 WIRE 圈数 Turns 绕线方向 Winding Direction S F 2UEW/ 0.07*100P 10Ts CCW ELECTRICAL SPECIFICATIONS 四、Electrical Specification： 温度 TEMPERATURE:25±10°C, 湿度RELATIVE HUMIDITY:65±20% 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TEST FREQUENCY 测试仪器 TEST EQUIPMENTS IND. S-F L：6.5uH±10% 100KHz/1.0V LCZ METER 1062B Shenzhen Chenxing Electronic Technology Co., Ltd. 5th Floor, Building 1, Xinkecheng Technology Industrial Park, No. 51 Dabao Road, Xin'an Street, Bao'an District, Shenzhen, China We statement that All measurements were performed radiated and therefore additional antenna gain documentation is not required.

Page 1 of 24 FCC ID: 2A2PN-JS-1PRO Report No.: LCSA06274029EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT For Ekoo Electronic Co., Ltd Jump Starter Test Model: JS-1 Pro Prepared for : Ekoo Electronic Co., Ltd Address : B09, Block B, F2, Bldg.B, Runfeng Pioneer Park, No.973, Minzhi Avenue, Minzhi St., Longhua, Shenzhen, CHINA 518000 Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Shajing Street, Baoan District, Shenzhen, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : June 27, 2024 Number of tested samples : 2 Serial number : A240626091-1(Engineer sample), A240626091-2(Normal sample) Date of Test : June 27, 2024 ~ July 09, 2024 Date of Report : July 10, 2024 Page 2 of 24 FCC ID: 2A2PN-JS-1PRO Report No.: LCSA06274029EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT FCC CFR 47 PART 15C Report Reference No. ................. : LCSA06274029EA Date Of Issue ................................. : July 10, 2024 Testing Laboratory Name ............ : Shenzhen LCS Compliance Testing Laboratory Ltd. Address .......................................... : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Shajing Street, Baoan District, Shenzhen, China Testing Location/ Procedure .......... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ......................... : Ekoo Electronic Co., Ltd Address .......................................... : B09, Block B, F2, Bldg.B, Runfeng Pioneer Park, No.973, Minzhi Avenue, Minzhi St., Longhua, Shenzhen, CHINA 518000 Test Specification Standard ......................................... : FCC CFR 47 PART 15C Test Report Form No...................... : TRF-4-E-168 A/0 TRF Originator ................................ : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF..................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test Item Description. .................. : Jump Starter Trade Mark ..................................... : N/A Test Model ...................................... : JS-1 Pro Power Supply ................................. : Capacity: 59.2Wh, 14.8V USB-C Input: 5V2A, 9V2A USB1 Output: 5V3A, 9V2A, 12V1.5A USB2 Output: 5V2.1A Wireless Charger: 10W Result ........................................... : Positive Compiled by: Supervised by: Approved by: Nadia Zhou/ Administrator Cary Luo/ Technique principal Gavin Liang/ Manager Page 3 of 24 FCC ID: 2A2PN-JS-1PRO Report No.: LCSA06274029EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCSA06274029EA July 10, 2024 Date of issue Test Model.............................. : JS-1 Pro EUT......................................... : Jump Starter Applicant............................... : Ekoo Electronic Co., Ltd Address.................................. : B09, Block B, F2, Bldg.B, Runfeng Pioneer Park, No.973, Minzhi Avenue, Minzhi St., Longhua, Shenzhen, CHINA 518000 Telephone............................... : / Fax.......................................... : / Manufacturer........................ : / Address................................... : / Telephone............................... : / Fax.......................................... : / Factory................................... : / Address................................... : / Telephone............................... : / Fax.......................................... : / Page 4 of 24 FCC ID: 2A2PN-JS-1PRO Report No.: LCSA06274029EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Revision History Report Version Issue Date Revision Content Revised By 000 July 10, 2024 Initial Issue -- Page 5 of 24 FCC ID: 2A2PN-JS-1PRO Report No.: LCSA06274029EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity TABLE OF CONTENTS 1. GENERAL INFORMATION ......................................................................................................... 6 1.1 Description of Device (EUT) ....…

Text truncated - open the document above for the full version.

Page 1 of 2 FCC ID: 2A2PN-JS-1PRO Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Photographs of Test Setup Radiated Emission below 30MHz Radiated Emission below 1GHz Page 2 of 2 FCC ID: 2A2PN-JS-1PRO Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Conducted Emission-AC adapter charge mode