2A2UK-JJT-A06wireless charger

INPUT VOLTAGE: 9v/3a 12V/2.5 Aairpods output: 1-3w USB OUTPUT: 5V 2A Frequency: 110-205KHZ net weight: 420g DUAL COIL WIRELESS CHARGING OUTPUT: 5W, 7.5 W, 10W, 15w Led power: 2W MATERIAL: ABS + PC Product Size: 228 * 142 * 23.5 mm Parameter specification Charging mode Points to note IPHONE:iPhone 13/13 Pro/13 Pro Max/12/12 Pro/12 Pro Max/11/11 Pro/11 Pro Max/Xs/Max/Xr/X/8/8 Plus Samsung：Galaxy S20/S20+ /S20 Ultra/S 10/S10+/S9/S9+/S8/S8+/S7/S7 edge/S6 edge Plus/Note 10/9/8/7/5 Any phone that supports Qi wireless charging。 Please pay attention to the following issues, otherwise it may lead to abnormal charging, high charging temperature, intermit- tent charging, or even non-charging. 1. Use QC2.0/3.0 quick charger adapter (9v/3a) for better charging performance. 5v/1a adapters are not supported. 2.This product supports the QC and PD protocols. 3.Touch the switch button, click on the light to turn on/off, and switch the light level. 4.For wireless charging, there should be no metal or magnetic objects within a distance of 4cm from the center point on the back of the phone. 5.The lower the temperature, the faster the charge. Charging speed is faster in winter than in summer. 6.Please do not charge in the hot and humid environment to avoid circuit damage. 7.Please keep it out of the reach of children to avoid unneces- sary accidents. Compatibility Configuration list Wireless Charger, charging cable, user manual The instruction and pictures are the sketch map, the final product is subject to the physical object. Thank you for your purchase of our products, this product is a smart phone wireless charger, allowing you to easily experience the fun of digital products. Please read this user manual carefully before using this product and keep it properly for reference. SWITCH/LAMP dimming adjustment Atmosphere Lamp AirPuds wireless charging station (also can charge mobile phone) You can fold it up Wireless charging station Clock (24-hour system) It can be used for storage Schematic diagram Cooling Hole 6 silicone pads Made in China Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1)this device may not cause harmful interference,and (2)this device must accept any interference received,including interference that may cause undesired operation. Note:This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,uses,and can radiate radio frequency energy,and if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not occur in aparticular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures: –Reorient or relocate the receiving antenna. –Increase the separation between the equipment and receiver. –Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. –Consult the dealer or an experienced radio / TV technician for help. FCC Requirement

Date:04/17/2018VCB_F-01:OperatingProceduresForm–FCCAuthorizationv02Page1of2 DongguanjiajiatongplasticmouldCo.,Ltd FederalCommunicationsCommission AuthorizationandEvaluationDivision 1435OaklandMillsRoad Columbia,MD21046 Date:2022-2-25 SUBJECT:FCCApplicationfor(FCCID:2A2UK-JJT-991) ToWhomItMayConcern: We,theundersigned,herebyauthorizeYoyoZhouin ShenzhenHuaxiaTesting TechnologyCo.,Ltdat1F.,BlockAofTongshengTechnologyBuilding,HuahuiRoad, DalangStreet,LonghuaDistrict,Shenzhen,Chinaonourbehalf,toapplytotheFederal CommunicationsCommissiononourequipment.Anyandallactscarriedoutby ShenzhenHuaxiaTestingTechnologyCo.,Ltd onourbehalfshallhavethesame effectasactsofourown. ThisistoadvisethatweareinfullcompliancewiththeAnti-DrugAbuseAct.We, theapplicant,arenotsubjecttoadenialoffederalbenefitspursuanttoSection 5301oftheAnti-DrugActof1988,21USC853a,andnopartytotheapplicationis subjecttoadenialoffederalbenefitspursuanttothatsection. Sincerely, (MustbesignedbythepersonthatislistedontheFCCWebsite) Signature: Contactname:LiEnping Companyname:DongguanjiajiatongplasticmouldCo.,Ltd Address:No.10,QiaojiaoMiddleRoad,Pingshan188IndustrialZone,TangxiaTown, DongguanCity,GuangdongProvince,China Date:04/17/2018VCB_F-01:OperatingProceduresForm–FCCAuthorizationv02Page2of2

Date:04/17/2018VCB_F-01:OperatingProceduresForm–FCCConfidentialityv02Page1of1 DongguanjiajiatongplasticmouldCo.,Ltd FederalCommunicationsCommission AuthorizationandEvaluationDivision ConfidentialityRequestregardingapplicationforcertificationofFCCID:2A2UK-JJT-991 PursuanttoSections0.457and0.459oftheCommission’sRules,weherebyrequest confidentialtreatmentofinformationaccompanyingthisapplicationasoutlinedbelow: ExhibitTypeFileName 1.BlockDiagram, 2.Schematics, 3.OperationalDescription 1.2A2UK-JJT-991-Blockdiagram 2.2A2UK-JJT-991-SCH 3.2A2UK-JJT-991-Operationaldescription Theabovematerialscontaintradesecretsandproprietaryinformationnotcustomarily releasedtothepublic.Thepublicdisclosureofthesematerialsmaybeharmfultothe applicantandprovideunjustifiedbenefitstoitscompetitors. TheapplicantunderstandsthatpursuanttoSection0.457oftheRules,disclosureofthis applicationandallaccompanyingdocumentationwillnotbemadebeforethedateofthe Grantforthisapplication. PursuanttoDA04-1705June15,2004oftheCommission’spublicnotice,wealso requesttemporaryconfidentialtreatmentofinformationaccompanyingthisapplication asoutlinedbelowforaninitialperiodofxxxx(ie-“45”,“90”or“180”)days: ExhibitTypeFileName N/AN/A Signature: Contactname:LiEnping Companyname:DongguanjiajiatongplasticmouldCo.,Ltd Address:No.10,QiaojiaoMiddleRoad,Pingshan188IndustrialZone,TangxiaTown, DongguanCity,GuangdongProvince,China

FCCID:2A2UK-JJT-A06 Externalphotos FCCID:2A2UK-JJT-A06

FCCID:2A2UK-JJT-A06 Internalphotos FCCID:2A2UK-JJT-A06

ShenzhenHuaxiaTestingTechnologyCo.,Ltd. 1F.,BlockAofTongshengTechnologyBuilding,HuahuiRoad,DalangStreet,LonghuaDistrict, Shenzhen,China Telephone:+86-755-26648640 Fax:+86-755-26648637 Website:www.cqa-cert.com ReportTemplateVersion:V05 ReportTemplateRevisionDate:2021-11-03 RFExposureEvaluationReport Thetestreportiseffectiveonlywithbothsignatureandspecializedstamp,Theresult(s)showninthisreportreferonlytothesample(s) tested.WithoutwrittenapprovalofCQA,thisreportcan’tbereproducedexceptinfull. ReportNo.: CQASZ20220200236E-02 Applicant:DongguanjiajiatongplasticmouldCo.,Ltd AddressofApplicant:No.10,QiaojiaoMiddleRoad,Pingshan188IndustrialZone,TangxiaTown, DongguanCity,GuangdongProvince,China EquipmentUnderTest(EUT): Product:wirelesscharger ModelNo.:JJT-A06 TestModelNo.:JJT-A06 BrandName:N/A FCCID:2A2UK-JJT-A06 Standards:47CFRPart1.1307 47CFRPart1.1310 KDB680106D01RFExposureWirelessChargingBaseAppv03r01 DateofReceipt:2022-2-23 DateofTest:2022-2-23to2022-2-27 DateofIssue: 2022-2-28 TestResult:PASS* *Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove TestedBy: (TimoLei) ReviewedBy: (RockHuang) ApprovedBy: (JackAi) ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20220200236E-02 Page:2of12 1Version RevisionHistoryOfReport ReportNo.Version Description IssueDate CQASZ20220200236E-02Rev.01 Initialreport 2022-2-28 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20220200236E-02 Page:3of12 2Contents Page 1VERSION.............................................................................................................................................................................2 2CONTENTS.........................................................................................................................................................................3 3GENERALINFORMATION..............................................................................................................................................4 3.1CLIENTINFORMATION....................................................................................................................................................4 3.2GENERALDESCRIPTIONOFEUT....................................................................................................................................4 3.3PRODUCTSPECIFICATIONSUBJECTIVETOTHISSTANDARD...........................................................................................4 3.4TESTENVIRONMENT......................................................................................................................................................5 3.5DESCRIPTIONOFSUPPORTUNITS...................................................................................................................................5 3.6TESTLOCATION..............................................................................................................................................................6 3.7TESTFACILITY...............................................................................................................................................................6 3.8EQUIPMENTLIST............................................................................................................................................................6 4RFEXPOSUREEVALUATION.......................................................................................................................................7 4.1RFEXPOSURECOMPLIANCEREQUIREMENT..................................................................................................................7 4.1.1Limits....................................................................................................................................................................7 4.1.2TestProcedure...................................................................................................................................................7 4.1.3TestSetup...........................................................................................................................................................8 4.1.4TestResults........................................................................................................................................................8 APPENDIXA:PHOTOGRAPHSOFTESTSETUP......................................................................................................12 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20220200236E-02 Page:4of12 3GeneralInformation 3.1ClientInformation Applicant:DongguanjiajiatongplasticmouldCo.,Ltd AddressofApplicant:No.10,QiaojiaoMiddleRoad,Pingshan188IndustrialZone,TangxiaTown, DongguanCity,GuangdongProvince,China Manufacturer:DongguanjiajiatongplasticmouldCo.,Ltd AddressofManufacturer:No.10,QiaojiaoMiddleRoad,Pingshan188IndustrialZone,TangxiaTown, DongguanCity,GuangdongProvince,China Factory:DongguanjiajiatongplasticmouldCo.,Ltd AddressofFactory:No.10,QiaojiaoMiddleRoad,Pingshan188IndustrialZone,TangxiaTown, DongguanCity,GuangdongProvince,China 3.2GeneralDescriptionofEUT ProductName: wirelesscharger ModelNo.: JJT-A06 TestModelNo.: JJT-A06 BrandName: N/A SoftwareVersion: V1.0 HardwareVersion: V1.0 PowerSupply: DC9V/3A12V/2.5A 3.3ProductSpecificationsubjectivetothisstandard EquipmentCategory:Non-ISMfrequency OperationFrequencyrange:110kHz~205kHz ModulationType:Induction AntennaType:Inductioncoil AntennaGain:0dBi Note: 1.Insection15.31(m),regardstotheoperatingfrequencyrangeless1MHz. ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20220200236E-02 Page:5of12 3.4TestEnvironment OperatingEnvironment: Temperature: 25.5  C Humidity:53%RH AtmosphericPressure:1009mbar TestMode: Modea:TheEUTatNormalWorking 3.5DescriptionofSupportUnits TheEUThasbeentestedwithassociatedequipmentbelow. 1）Supportequipment DescriptionManufacturerModelNo.Certification Suppliedby Adapter/ LPL- C010050200Z /CQA earphoneAPPLEAIRPODS /CQA watch/S1 /CQA Wirelesschargeload / //CQA 2)Cable CableNo.Descript…

Text truncated - open the document above for the full version.

ShenzhenHuaxiaTestingTechnologyCo.,Ltd. 1F.,BlockAofTongshengTechnologyBuilding,HuahuiRoad,DalangStreet,LonghuaDistrict, Shenzhen,China Telephone:+86-755-26648640 Fax:+86-755-26648637 Website:www.cqa-cert.com ReportTemplateVersion:V05 ReportTemplateRevisionDate:2021-11-03 TestReport Thetestreportiseffectiveonlywithbothsignatureandspecializedstamp,Theresult(s)showninthisreportreferonly tothesample(s)tested.WithoutwrittenapprovalofCQA,thisreportcan’tbereproducedexceptinfull. ReportNo.:CQASZ20220200236E-01 Applicant:DongguanjiajiatongplasticmouldCo.,Ltd AddressofApplicant:No.10,QiaojiaoMiddleRoad,Pingshan188IndustrialZone,TangxiaTown, DongguanCity,GuangdongProvince,China EquipmentUnderTest(EUT): Product:wirelesscharger ModelNo.:JJT-A06 TestModelNo.:JJT-A06 BrandName:N/A FCCID:2A2UK-JJT-A06 Standards:47CFRPart15,SubpartC DateofReceipt:2022-2-23 DateofTest:2022-2-23to2022-2-27 DateofIssue: 2022-2-28 TestResult:PASS* *Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove TestedBy: (TimoLei) ReviewedBy: (RockHuang) ApprovedBy: (JackAi) ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20220200236E-01 Page: 2 of 27 1Version RevisionHistoryOfReport ReportNo.Version Description IssueDate CQASZ20220200236E-01Rev.01 Initialreport 2022-2-28 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20220200236E-01 Page: 3 of 27 2TestSummary TestItemTestRequirementTestmethodResult AntennaRequirement 47CFRPart15,SubpartCSection 15.203 ANSIC63.102013PASS ACPowerLine Conducted Emission 47CFRPart15,SubpartCSection 15.207 ANSIC63.102013PASS 20dBOccupied Bandwidth 47CFRPart15,SubpartCSection 15.215 ANSIC63.102013PASS RadiatedEmission, RadiatedSpurious Emissions 47CFRPart15,SubpartCSection 15.209 ANSIC63.102013PASS ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20220200236E-01 Page: 4 of 27 3Contents Page 1VERSION..........................................................................................................................................................................2 2TESTSUMMARY............................................................................................................................................................3 3CONTENTS......................................................................................................................................................................4 4GENERALINFORMATION...........................................................................................................................................5 4.1CLIENTINFORMATION.................................................................................................................................................5 4.2GENERALDESCRIPTIONOFEUT.................................................................................................................................5 4.3PRODUCTSPECIFICATIONSUBJECTIVETOTHISSTANDARD.........................................................................................5 4.4TESTENVIRONMENT....................................................................................................................................................6 4.5DESCRIPTIONOFSUPPORTUNITS................................................................................................................................6 4.6STATEMENTOFTHEMEASUREMENTUNCERTAINTY....................................................................................................7 4.7TESTLOCATION...........................................................................................................................................................7 4.8TESTFACILITY.............................................................................................................................................................7 4.9DEVIATIONFROMSTANDARDS....................................................................................................................................7 4.10OTHERINFORMATIONREQUESTEDBYTHECUSTOMER............................................................................................7 4.11EQUIPMENTLIST........................................................................................................................................................8 5TESTRESULTSANDMEASUREMENTDATA........................................................................................................9 5.1ANTENNAREQUIREMENT............................................................................................................................................9 5.2CONDUCTEDEMISSIONS............................................................................................................................................10 5.320DBOCCUPYBANDWIDTH......................................................................................................................................13 5.4RADIATEDSPURIOUSEMISSION&RESTRICTEDBANDS............................................................................................16 5.4.1SpuriousEmissions.......................................................................................................................................16 6PHOTOGRAPHS-EUTTESTSETUP......................................................................................................................22 6.1RADIATEDEMISSION.................................................................................................................................................22 6.2CONDUCTEDEMISSION..............................................................................................................................................23 7PHOTOGRAPHS-EUTCONSTRUCTIONALDETAILS.......................................................................................24 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20220200236E-01 Page: 5 of 27 4GeneralInformation 4.1ClientInformation Applicant:DongguanjiajiatongplasticmouldCo.,Ltd AddressofApplicant:No.10,Qiaojia…

Text truncated - open the document above for the full version.

FCCID:2A2UK-JJT-A06 Setupphotos 1Photographs-EUTTestSetup 1.1RadiatedEmission 9kHz~30MHz: 30MHz~1GHz: FCCID:2A2UK-JJT-A06 1.2ConductedEmission