2A3W8D100BLMBluetooth LED Floodlight

LED FLOOD LIGHT 245 SPECIFICATIONS Model Input Voltage CCT Power Factor CRI Beam Angle t a Luminaire Location Input Current Rated Power Color 0.32A 25W 0.56A 50W 1.07A 100W 120° -20-40°C/-4°F-104°F SUITABLE FOR WET LOCATIONS 100-120V～60Hz RGB 2700K ≥0.5 ≥80 LED FLOOD LIGHT 3 COMPONENTS AND STRUCTURE D30BL G50BL 9 PREPARATION 8 MODEL: D30BLG50BL D50BLD100BL Model Weight DimensionsLxHxW DIMENSIONS 0.49 kg / 1.08 lb 型号+产品名称+文件名称 尺寸(长x宽x高)mm 材质 料号 版本号 SKU D30BL & G50BL & D50BL & D100BL 泛光灯 蓝牙款 （带插头不带开关） 说明书 Onforu 展开尺寸：770 X 130mm 折后尺寸110 X 130mm 105G双铜纸 四色印刷 正反面印刷 风琴折 A33D1017Z02 Z02 (增加D50BL 型号） 结构 林利诚 日期：日期：日期： 确认人审核人 日期：2023.1.31 日期： 包装电子 1011 INSTALLATION STEPS FCC ID: 2A3W8D100BLM US 1.5m(4.92ft) 3x18AWG 1 2 3 1. Cover 2. LED Light Source 3. Lamp Bracket 205x30x125 mm / 8.07x1.18x4.92 in 230x35x139 mm/ 9.06x1.36x5.47 in W H L 0.95KG /2.09lb Step 1: According to the spacing (see the “A” part of the picture) of two screw bits on the LED Light bracket, drill two mounting holes. Step 2: Put the bracket onto the prepared mounting holes and then screw it on. Step 3: Adjust the beam direction as you like, Wiring. Step 4: Adjust the beam direction as you like, and then plug intothe main socket. D50BL APP INSTALLATIONSAPP OPERATING INSTRUCTIONS 6 APP OPERATING INSTRUCTIONS 7 APP OPERATING INSTRUCTIONS PREPARATION Check all components for damage, do not use the product if it is damaged. Estimated Assembly Time:10-30 minutes TOOLS REQUIREDnot included WARNING: THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED. RISK OF SHOCK- BEFORE BEGINNING INSTALLATION,TURN OFF ELECTRICITY AT THE CIRCUIT BREAKER BOX OR THE MAIN FUSE BOX. Flathead screwdriver ScrewdriverElectric drillEye ProtectionPliersStep Ladder WARNING: INSTALLING THIS LIGHT IN AN UNGROUNDED ELECTRICAL SYSTEM MAY CAUSE THE METAL PARTS OF THE LIGHT TO CARRY CURRENT IF ANY WIRES OR WIRE CONNECTIONS ARE DAMAGED OR LOOSE. IN THIS CASE, ANYONE WHO TOUCHES THE LIGHT WILL RECEIVE AN ELECTRIC SHOCK, RESULTING IN INJURY OR DEATH. BE CAREFUL NOT TO DAMAGE OR CUT THE WIRE INSULATION (COVERING) DURING INSTALLATION. DO NOT LET THE WIRES TOUCH ANY SHARP EDGES. CAUTION: PLEASE MAKE SURE YOUR WALL SWITCH AND POWER AT MAIN CIRCUIT BREAKER BOTH ARE OFF. IF IN DOUBT ABOUT ELECTRICAL INSTALLATION, CONSULT A LICENSED ELECTRICIAN. 12 FCC Warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. D30BLG50BL Model Weight DimensionsLxHxW 289x39x177 mm/ 11.38x1.54x6.97in 1.2 kg / 2.65 lb D50BLD100BL D30BL G50BL D100BL 0.56A 50W D50BL D30BL US 1.5m(4.92ft) 2x18AWG STEP 2 Trick-xxxx STEP 1 Happy Lighting Brightness Selection Interface You could adjust the brightness. Music Mode Interface You could control the brightness and dynamic changes of the light by playing local music in the phone. Dynamic Mode Interface: The light has 5 dynamic modes (Gradient, Breathing, Strobe, Jump, Auto), and speed can be adjusted. Mobile Speaker: The dynamic modes can change with the sound inside the phone or other external sounds. Timing Interface You can turn on or turn off the light regularly. ON/OFF Settings Device managment Switch colour dosk Brightness Preset colour Warm White Color pictures Color pictures Settings Preview song Next song Play/ Pause Cycle Mode Color jump switch Device managment Settings Style selection Device managment Rainbow Mode Speed Device managment Mic sensitivity Settings Settings Open/ Close Device managment Set-up timing Device selection HOW TO CONTROL LIGHTS IN GROUPS If you use the app to connect 2 or more lights, the app will default , these lights as a group, and you can control these lights at the same time. If you want to control one of the lights separately, select the light first and then control it. Product Manual Manufacturer/Hersteller: MDH LIGHTING LTD Suite 302, 292 Strovolos Avenue, 2048 Strovolos Nicosia, Cyprus UK ImporterMDH LIGHTING LTD 69 Aberdeen Avenue, Cambridge CB2 8DL, United Kingdom Made in China HK Bright International Lighting Co., Limited Unit 616, 6/F., Kam Teem Industrial Building, 135 Connaught Road West, Sai Wan Hong Kong [email protected] www.onforuleds.com D100BL 208x127x37 mm/ 8.19x5x1.46in 0.58 kg / 1.28 lb Luminous Flux 2000lm4000lm4000lm7200lm

- Shen Zhen Shi Meng Zhi Tuo Ke Ji You Xian Gong Si - Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 5/4/2023 U.S. Agent Designation Contact Name: Tim Payne Company of U.S. agent: FCC US Agent, LLC Physical U.S. address of agent: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA FRN of U.S. agent: 0033402884 Email address of U.S. agent: Shen Zhen Shi Meng Zhi Tuo Ke Ji You Xian Gong Siacknowledges their consent forthe following contact located in the United States to act as theiragent for service of processfor the equipment for which authorization is sought (FCC ID: 2A3W8D100BLM): [email protected] FCC US Agent, LLC acknowledges their obligation to accept service of process on behalf of Shen Zhen Shi Meng Zhi Tuo Ke Ji You Xian Gong Si. Shen Zhen Shi Meng Zhi Tuo Ke Ji You Xian Gong Si with the FRN 0031725823 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). Sincerely, Signature karlie hu manager Shen Zhen Shi Meng Zhi Tuo Ke Ji You Xian Gong Si Signature Tim Payne Manager FCC US Agent, LLC 48_[mo del] US_Agent_2.911(d)(7) - U, V04 The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB.

C5266091_X24_Ed.2 1/1 Shen Zhen Shi Meng Zhi Tuo Ke Ji You Xian Gong Si “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Shen Zhen Shi Meng Zhi Tuo Ke Ji You Xian Gong Si Grantee code: 2A3W8 FCC ID: 2A3W8D100BLM Contact Name: karlie hu Address: Qian Wan yi lu 1 hao A dong 201 shi, qian hai shen gang he zuo qu shen zhen, guang dong 518000 China Telephone No: 13719247689 Fax No: N/A Email: [email protected] i. [Shen Zhen Shi Meng Zhi Tuo Ke Ji You Xian Gong Si] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [Shen Zhen Shi Meng Zhi Tuo Ke Ji You Xian Gong Si] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [Shen Zhen Shi Meng Zhi Tuo Ke Ji You Xian Gong Si] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment. Date: 2023/05/05 Applicant’s Name: karlie hu Title: manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

Shen Zhen Shi Meng Zhi Tuo Ke Ji You Xian Gong Si Product Similarity Declaration Product name: Bluetooth LED Floodlight Model name: D100BL, D50BL, I20BL FCC ID: 2A3W8D100BLM We (Shen Zhen Shi Meng Zhi Tuo Ke Ji You Xian Gong Si) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name, LED lamp Rated Power and Luminous Flux has slight differences. Signature: Client ’s name/ title : karliehu / Manager Contactinformation/ address: Qian Wan yi lu 1 hao A dong 201 shi, qian hai shen gang he zuo qu shen zhen,guangdong,518000 China Tel: 13719247689Fax: N/A E-Mail:[email protected]

C5266091_X8_Ed.1 1/1 Shen Zhen Shi Meng Zhi Tuo Ke Ji You Xian Gong Si Letter of Authorization Company: Shen Zhen Shi Meng Zhi Tuo Ke Ji You Xian Gong Si Address: Qian Wan yi lu 1 hao A dong 201 shi, qian hai shen gang he zuo qu shen zhen, guang dong 518000 China Product Name: Bluetooth LED Floodlight Model Number: D100BL, D50BL, I20BL FCC Identifier: 2A3W8D100BLM We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: karlie hu Date: 2023.05.05 Title: manager Signature of applicant:

C5266091_X10_Ed.2 1/1 Shen Zhen Shi Meng Zhi Tuo Ke Ji You Xian Gong Si Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023-05.05 Subject: Bluetooth LED Floodlight FCC ID: 2A3W8D100BLM To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☒ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: karlie hu Title: manager 2023.05.05

Page 1 of 3 FCC ID: 2A3W8D100BLM Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity External Photos of the EUT Fig. 1 Fig. 2 Page 2 of 3 FCC ID: 2A3W8D100BLM Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 3 FCC ID: 2A3W8D100BLM Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6

Page 1 of 1 FCC ID: 2A3W8D100BLM Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity LABEL AND LOCATION (Size: L 3.0cm x W 1.5cm) Label Location Bluetooth LED Floodlight Model: D100BL FCC ID: 2A3W8D100BLM

Page1of4FCCID:2A3W8D100BLM ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity InternalPhotosoftheEUT Fig.1 Fig.2 Antenna Page2of4FCCID:2A3W8D100BLM ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.3 Fig.4 Page3of4FCCID:2A3W8D100BLM ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.5 Fig.6 Page4of4FCCID:2A3W8D100BLM ShenzhenLCSComplianceTestingLaboratoryLtd. Add:101,201BldgA&301BldgC,JujiIndustrialParkYabianxueziwei,ShajingStreet,BaoanDistrict,Shenzhen, 518000,China Tel:+(86)0755-82591330|E-mail:[email protected]|Web:www.lcs-cert.com Scancodetocheckauthenticity Fig.7 、

Page 1 of 3 FCC ID: 2A3W8D100BLM Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC RF Exposure Evaluation 1. Product Information Product name Bluetooth LED Floodlight Model number D100BL Additional Model No. D50BL, I20BL Model Declaration PCB board, structure and internal of these model(s) are the same, So no additional models were tested Power supply Input: AC 100-120V, 0.83A, 60Hz, 100W Modulation Type GFSK for Bluetooth V5.2(DTS) Antenna Type PCB Antenna Antenna Gain 3.0dBi(Max.) Hardware version / Software version / FCC Operation frequency 2402MHz ~ 2480MHz Exposure category General population/uncontrolled environment EUT Type Production Unit Device Type Mobile Devices 2. Evaluation Method Systems operating under the provisions of FCC 47 CFR section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as mobile device whereby a distance of 0.2m normally can be maintained between the user and the device, and below RF Permissible Exposure limit shall comply with. In accordance with KDB447498D01 for Simultaneous transmission MPE test exclusion applies when the sum of the MPE ratios for all simultaneous transmitting antennas incorporated in a host device, based on the calculated/estimated, numerically modelled or measured field strengths or power density, is ≤ 1.0. The MPE ratio of each antenna is determined at the minimum test separation distance required by the operating configurations and exposure conditions of the host device, according to the ratio of field strengths or power density to MPE limit, at the test frequency. Either the maximum peak or spatially averaged results from measurements or numerical simulations may be used to determine the MPE ratios. Spatial averaging does not apply when MPE is estimated using simple calculations based on far-field plane-wave equivalent conditions. The antenna installation and operating requirements for the host device must meet the minimum test separation distances required by all antennas, in both standalone and simultaneous transmission operations, to satisfy compliance. Page 2 of 3 FCC ID: 2A3W8D100BLM Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity 3. Limit 3. 1 Refer Evaluation Method ANSI C95.1–1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. FCC KDB publication 447498 D01 General 1 RF Exposure Guidance v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies. FCC CFR 47 part1 1.1310: Radiofrequency radiation exposure limits. FCC CFR 47 part2 2.1091: Radiofrequency radiation exposure evaluation: mobile devices 3. 2 Limit Limits for Maximum Permissible Exposure (MPE)/Controlled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 1842/f 61.4 / / 1.63 4.89/f 0.163 / / (100) * (900/f 2 )* 1.0 f/300 5 6 6 6 6 6 Limits for Maximum Permissible Exposure (MPE)/Uncontrolled Exposure Frequency Range(MHz) Electric Field Strength(V/m) Magnetic Field Strength(A/m) Power Density (mW/cm²) Averaging Time (minute) Limits for Occupational/Controlled Exposure 0.3 – 3.0 3.0 – 30 30 – 300 300 – 1500 1500 – 100,000 614 824/f 27.5 / / 1.63 2.19/f 0.073 / / (100) * (180/f 2 )* 0.2 f/1500 1.0 30 30 30 30 30 F=frequency in MHz *=Plane-wave equivalent power density 4. MPE Calculation Method Predication of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S=PG/4πR² Where: S=power density P=power input to antenna G=power gain of the antenna in the direction of interest relative to an isotropic radiator R=distance to the center of radiation of the antenna 5. Antenna Information PCB Antenna can only use antennas certificated as follows provided by manufacturer; Internal Identification Antenna type and antenna number Operate frequency band Maximum antenna gain Note Antenna PCB Antenna 2402MHz ~ 2480MHz 3.0dBi BT Antenna Page 3 of 3 FCC ID: 2A3W8D100BLM Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity 6. Conducted Power < BT LE Max Conducted Power > Mode Channel Frequency(MHz) Max Conducted Power (dBm) GFSK 0 2402 -0.28 19 2440 -0.18 39 2480 0.09 7. Manufacturing Tolerance <BT LE> GFSK (Peak) Channel Channel 0 Channel 19 Channel 39 Target (dBm) 0 0 0 Tolerance ±(dB) 1.0 1.0 1.0 8. Measurement Results As declared by the Applicant, the EUT is a wireless device used in a fix application, at least 20 cm from any body part of the user or nearby persons; from the maximum EUT RF output power, the minimum separation distance, r =20cm, as well as the gain of the used antenna refer to antenna information, the RF power density can be obtained. [Antenna] <BT LE> Band/Mode RF output power Antenna Gain (dBi) MPE (mW/cm2) MPE Limits (mW/cm2) dBm mW GFSK 1.0 1.2589 3.0 0.0005 1.0000 Remark: 1. Output power including tune-up tolerance; 2. MPE evaluate distance is 20cm from user manual provide by manufacturer; 9. Conclusion The measurement results comply with t…

Text truncated - open the document above for the full version.

QR/RD-P01-09B SPECIFICATION ShenzhenGuandetongElectronicLimited Antennatestreport http://www.szgdtrf.com Page2 Content cover .................................................................................................... 1 catalogue .............................................................................................. 2 一、Productpictures ......................................................................... 3 二、Productparameters ......................................................................... 3 三、S11data ................................................................................................................... 4 四、AntennaDimension ........................................................................... 5 五、 RadiationPattern ................................................................. 6 http://www.szgdtrf.com Page3 一、Productpictures 二、Product parameters Product parameters Name FPC Antenna Model Type GDT-2PWIFI-001 Electrical Specifications Frenquency Range Polarizationperpendicular Impedance 2400-2500MHz 5200-5800MHZ 50 Ω Radiation directionomnidirectional VSWR ≦2Power 50W Gain 3.00dBi Bandwidth 100/600MHz Mechanical Specifications Dimensions41.40*12±1mm Chassis Color black ConnectorIPEX Cable Length 60MM FPC Chassis Material Working Temperature -40°C-+85°C Limit Temperature -40°C-+85°C http://www.szgdtrf.com Page4 三、S11（VSWR、Returnloss、Smith） http://www.szgdtrf.com Page5 四、Antenna Dimension http://www.szgdtrf.com Page6 五、RadiationPattern http://www.szgdtrf.com Page7

Page 1 of 24 FCC ID: 2A3W8D100BLM Report No.: LCSA032023206EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Appendix A RF Test Data for BT LE (Conducted Measurement) Product Name: Bluetooth LED Floodlight Test Model: D100BL Environmental Conditions Temperature: 23.5°C Relative Humidity: 52.2% ATM Pressure: 100.0 kPa Test Engineer: Mening Su Supervised by: Ling Zhu Page 2 of 24 FCC ID: 2A3W8D100BLM Report No.: LCSA032023206EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.1 DTS Bandwidth Test Result TestMode Antenna Channel DTS BW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict BLE_1M Ant1 2402 0.712 2401.636 2402.348 0.5 PASS 2440 0.712 2439.636 2440.348 0.5 PASS 2480 0.708 2479.636 2480.344 0.5 PASS Page 3 of 24 FCC ID: 2A3W8D100BLM Report No.: LCSA032023206EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page 4 of 24 FCC ID: 2A3W8D100BLM Report No.: LCSA032023206EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 5 of 24 FCC ID: 2A3W8D100BLM Report No.: LCSA032023206EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.2 Maximum conducted output power Test Result TestMode Antenna Channel Result[dBm] Limit[dBm] Verdict BLE_1M Ant1 2402 -0.28 ≤30 PASS 2440 -0.18 ≤30 PASS 2480 0.09 ≤30 PASS Page 6 of 24 FCC ID: 2A3W8D100BLM Report No.: LCSA032023206EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page 7 of 24 FCC ID: 2A3W8D100BLM Report No.: LCSA032023206EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 8 of 24 FCC ID: 2A3W8D100BLM Report No.: LCSA032023206EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.3 Maximum power spectral density Test Result TestMode Antenna Channel Result[dBm/3-100kHz] Limit[dBm/3kHz] Verdict BLE_1M Ant1 2402 -15.42 ≤8.00 PASS 2440 -15.29 ≤8.00 PASS 2480 -14.97 ≤8.00 PASS Page 9 of 24 FCC ID: 2A3W8D100BLM Report No.: LCSA032023206EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page 10 of 24 FCC ID: 2A3W8D100BLM Report No.: LCSA032023206EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Page 11 of 24 FCC ID: 2A3W8D100BLM Report No.: LCSA032023206EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.4 Band edge measurements Test Result TestMode Antenna ChName Channel RefLevel[dBm] Result[dBm] Limit[dBm] Verdict BLE_1M Ant1 Low 2402 -1.08 -59.41 ≤-21.08 PASS High 2480 -0.67 -58.07 ≤-20.67 PASS Page 12 of 24 FCC ID: 2A3W8D100BLM Report No.: LCSA032023206EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs BLE_1M_Ant1_Low_2402 BLE_1M_Ant1_High_2480 Page 13 of 24 FCC ID: 2A3W8D100BLM Report No.: LCSA032023206EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 10…

Text truncated - open the document above for the full version.