2A482-BS-PS007Smooth Writing Wireless Stylus Charging Case

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‒ Reorient or relocate the receiving antenna. ‒ Increase the separation between the equipment and receiver. ‒ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‒ Consult the dealer or an experienced radio/TV technician for help. 产品示意图Product Diagram 产品参数 Product Specifications 名称：倍思 笔畅无线充电容手写笔无线充电舱 型号：BS-PS007 材质：ABS+PC 输入：5V ⎓0.5A (Max.) 2.5W（Max.） 输出功率：1.5W (Max.) 颜色：白色 尺寸：188.5 x 24 x 14.8mm 重量：约35.5g 配件：充电线*1 适用机型：倍思 笔畅无线充电容手写笔系列 Name: Baseus Smooth Writing Wireless Stylus Charging Case Model No.: BS-PS007 Material: ABS+PC Input: 5V ⎓0.5A (Max.) 2.5W（Max.） Output Power: 1.5W (Max.) Color: White Product Size: 188.5 x 24 x 14.8mm Product Weight: About 35.5g Accessories: Charging cable*1 Compatible Model: Baseus Smooth Writing Wireless Stylus 充电舱充电操作 1. 请采用标准USB转Type-C数据线充电，将一端连接至充电舱 Type-C接口，另一端连接电脑或者平板上的USB接口，即可充电； 2. 将转接线一端连接至充电舱Type-C接口，另一端插入5V/0.5A的 直流电源适配器或移动电源，即可充电。 Operation Instructions 1. Please use a standard USB to Type-C cable for charging. Connect one end to the Type-C port on the charging case and the other to a USB port on a computer or a tablet, and start charging. 2. Connect one end of the adapter cable to the Type-C port on the charging case and the other to a 5V/0.5A DC power adapter or power bank, and start charging. 禁止食用，不可水洗。 Not edible, Not washable. 此设备符合欧盟指令2012/19/EU、2006/66//EU的规定，此设备不得与普通废弃 物一起处理，必须回收利用。此符号标明本产品不得作为生活垃圾处理，而必须 将本产品交至相应的废品回收站，进行电子电气设备回收处理。 This equipment complies with the provisions of Directive 2012/19/EU、 2006/66//EU. It is strictly forbidden to dispose of this equipment with ordinary trash; it must be recycled. This symbol indicates that the product shall not be treated as regular domestic trash, and must be delivered to a recycling center that is capable of recycling electronic and electrical equipment. CNEN 倍思 笔畅无线充电容手写笔无线充电舱 Baseus Smooth Writing Wireless Stylus Charging Case User Manual 特此申明，深圳市倍思科技有限公司的产品型号为：BS-PS007符合指令2014/53/EU、 2011/65/EU的规定。欧盟符合性声明的全文可在以下网站查询：www.baseus.com It is hereby declared that BS-PS007, a product model of Shenzhen Baseus Technology Co., Ltd., complies with the provisions of Directive 2014/53/EU, Directive 2011/65/EU . The full text of the EC Declaration of Conformity can be found on the following website: www.baseus.com Warm Tip: The 5-year icon refers to the "effective life of environmental protection", not the product quality assurance period. Electronic products all contain harmful substances such as lead, mercury and cadmium. Once they are overused, harmful substances may leak or mutate, cause pollution to the environment, or cause serious damage to people and property. The term of "environmental protection use" means that all electronic products will be required to use within this effective period. We will no longer be responsible for the quality of the products due to the safety risks that arise after the safe use period. This form is compiled in accordance with SJ/T 11364. O：It indicates that the content of the harmful substance in all homogeneous materials of the component is below the limit specified in GB/T 26572 standard. X: The content of harmful substances in at least one homogeneous material of this part exceeds the limit stipulated in GB/T 26572 standard. Declaration on hazardous substances and elements contained in electronic products PCB Plastic Accessory Hazardous substances and elements Part Descrption X O O Lead （pb） O O O Mercury （Hg） O O O Cadmium （Cd） O O O Hexavalent chromium （Cr Vl） O O O Polybrominated Biphenyls （PBB） O O O Polybrominated Biphenyl ethers （PBDE） 电子信息产品有害物质声明 PCB 塑料 附件 有害物质或元素 部件名称 X O O 铅 （pb） O O O 汞 （Hg） O O O 镉 （Cd） O O O 六价铬 （Cr Vl） O O O 多溴联苯 （PBB） O O O 多溴二苯醚 （PBDE） 本表格依据SJ/T 11364的规定编制。 O：表示该有害物质在该部件所有均质材料中的含量均在GB/T 26572标准规定的限量要 求以下。 X：表示该有害物质至少在该部件某一均质材料中的含量超出GB/T 26572标准规定的限 量要求。 温馨提示：5年图标是指“环保有效使用期限”，不是产品质量保证期限。电子产品均含有铅、 汞、镉等有害物质，一旦超期使用，有害物质将可能因为发生外泄或突变，对环境造成污染， 或对人体及人身财产造成严重损害。“环保使用期限”，意为所有的电子产品都将被要求在 此有效限期内使用，超过安全使用年限之后出现的安全风险问题，我们将不再对产品质量 负责。 PB3707Z-P0A0 100xxxxxxxx 制造商： 深圳市倍思科技有限公司 地址：深圳市龙岗区坂田街道岗头社区雪岗路2008号倍思智能园B栋二层 执行标准： GB 4943.1-2011 热线： 4000-712-711 网址： www.baseus.com Manufacturer: Shenzhen Baseus Technology Co., Ltd. Add: 2th Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen Executive Standard:GB 4943.1-2011 Hotline: +86-4000-712-711 Website: www.baseus.com FCC ID：2A482-BS-PS007 充电舱 Charging case 倍思 笔畅无线充电容手写笔无线充电舱 说明书\100g悦声高白63*185mm 对折 正面反面 倍思包装设计稿件信息 版本历史 基 本 信 息 产品型号 产品名称 产品方案编码 包装编码+版本号PB3706Z_P0A0 物料规格描述 包装平面设计黄景汇 变更日期变更描述版本 P0A02022.08.01初始版本 包装结构设计唐斌峰 物料编码 1000xxxx 包装审核区域责任划分 产品经理/项目主管请在此处签名 认证工程师请在此处签名 品质工程师请在此处签名 定制代表请在此处签名 品类策划/文案策划请在此处签名 包装设计师/组长/主管请在此处签名 产品 相关 认证 相关 品质 相关 定制 需求 品类 相关 包装 设计 相关 认证相关文案 产品外观/参数…

Text truncated - open the document above for the full version.

Externalphotos

20220718 谢东涛

Internalphotos

ShenzhenHuaxiaTestingTechnologyCo.,Ltd. 1F.,BlockAofTongshengTechnologyBuilding,HuahuiRoad,DalangStreet,LonghuaDistrict, Shenzhen,China Telephone:+86-755-26648640 Fax:+86-755-26648637 Website:www.cqa-cert.com ReportTemplateVersion:V05 ReportTemplateRevisionDate:2021-11-03 RFExposureEvaluationReport Thetestreportiseffectiveonlywithbothsignatureandspecializedstamp,Theresult(s)showninthisreportreferonlytothesample(s) tested.WithoutwrittenapprovalofCQA,thisreportcan’tbereproducedexceptinfull. ReportNo.: CQASZ20220701207E-02 Applicant:ShenzhenBaseusTechnologyCo.,Ltd. AddressofApplicant:2thFloor,BuildingB,BaseusIntelligencePark,No.2008,XuegangRd,Gangtou Community,BantianStreet,LonggangDistrict,Shenzhen. EquipmentUnderTest(EUT): Product:BaseusSmoothWritingWirelessStylusChargingCase ModelNo.:BS-PS007 TestModelNo.:BS-PS007 BrandName:Baseus FCCID:2A482-BS-PS007 Standards:47CFRPart1.1307 47CFRPart1.1310 KDB680106D01RFExposureWirelessChargingBaseAppv03r01 DateofReceipt:2022-7-15 DateofTest:2022-7-15to2022-7-27 DateofIssue: 2022-7-29 TestResult:PASS* *Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove TestedBy: (TimoLei) ReviewedBy: (KLiao) ApprovedBy: (JackAi) ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20220701207E-02 Page:2of10 1Version RevisionHistoryOfReport ReportNo.Version Description IssueDate CQASZ20220701207E-02Rev.01 Initialreport 2022-7-29 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20220701207E-02 Page:3of10 2Contents Page 1VERSION............................................................................................................................................................................2 2CONTENTS........................................................................................................................................................................3 3GENERALINFORMATION..............................................................................................................................................4 3.1CLIENTINFORMATION...................................................................................................................................................4 3.2GENERALDESCRIPTIONOFEUT...................................................................................................................................4 3.3PRODUCTSPECIFICATIONSUBJECTIVETOTHISSTANDARD...........................................................................................4 3.4TESTENVIRONMENT......................................................................................................................................................5 3.5DESCRIPTIONOFSUPPORTUNITS..................................................................................................................................5 3.6TESTLOCATION.............................................................................................................................................................6 3.7TESTFACILITY...............................................................................................................................................................6 3.8EQUIPMENTLIST............................................................................................................................................................6 4RFEXPOSUREEVALUATION.......................................................................................................................................7 4.1RFEXPOSURECOMPLIANCEREQUIREMENT.................................................................................................................7 4.1.1Limits....................................................................................................................................................................7 4.1.2TestProcedure...................................................................................................................................................7 4.1.3TestSetup...........................................................................................................................................................8 4.1.4TestResults........................................................................................................................................................8 APPENDIXA:PHOTOGRAPHSOFTESTSETUP.....................................................................................................10 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20220701207E-02 Page:4of10 3GeneralInformation 3.1ClientInformation Applicant:ShenzhenBaseusTechnologyCo.,Ltd. AddressofApplicant:2thFloor,BuildingB,BaseusIntelligencePark,No.2008,XuegangRd, GangtouCommunity,BantianStreet,LonggangDistrict,Shenzhen. Manufacturer:ShenzhenBaseusTechnologyCo.,Ltd. AddressofManufacturer:2thFloor,BuildingB,BaseusIntelligencePark,No.2008,XuegangRd, GangtouCommunity,BantianStreet,LonggangDistrict,Shenzhen. Factory: YKsongPenlndustryTechR&DCenterShenzhenCo.，Ltd AddressofFactory:5/F,buildinga1,dongzhijiaIndustrialPark,Huangmacommunity,Hangcheng street,Bao'anDistrict,ShenzhenCity,GuangdongProvince 3.2GeneralDescriptionofEUT ProductName: BaseusSmoothWritingWirelessStylusChargingCase ModelNo.: BS-PS007 TestModelNo.: BS-PS007 BrandName: Baseus SoftwareVersion: V1.0 HardwareVersion: V1.0 EUTPowerSupply: DC5V0.5A(Max)2.5W(Max) 3.3ProductSpecificationsubjectivetothisstandard EquipmentCategory:Non-ISMfrequency OperationFrequencyrange:110kHz~205kHz ModulationType:Induction AntennaType:Inductioncoil AntennaGain:0dBi Power:KeeptheEUTWirelessOutPut1.5W Note: 1.Insection15.31(m),regardstotheoperatingfrequencyrangeless1MHz. ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20220701207E-02 Page:5of10 3.4TestEnvironment OperatingEnvironment: Temperature: 25.5  C Humidity:53%RH AtmosphericPressure:1009mbar TestMode: Modea:KeeptheEUTWirelessOutPut1.5W 3.5DescriptionofSupportUnits TheEUThasbeentestedwithassociatedequipmentbelow. 1）Supportequipment …

Text truncated - open the document above for the full version.

ShenzhenHuaxiaTestingTechnologyCo.,Ltd. 1F.,BlockAofTongshengTechnologyBuilding,HuahuiRoad,DalangStreet,LonghuaDistrict, Shenzhen,China Telephone:+86-755-26648640 Fax:+86-755-26648637 Website:www.cqa-cert.com ReportTemplateVersion:V05 ReportTemplateRevisionDate:2021-11-03 TestReport Thetestreportiseffectiveonlywithbothsignatureandspecializedstamp,Theresult(s)showninthisreportreferonly tothesample(s)tested.WithoutwrittenapprovalofCQA,thisreportcan’tbereproducedexceptinfull. ReportNo.:CQASZ20220701207E-01 Applicant:ShenzhenBaseusTechnologyCo.,Ltd. AddressofApplicant:2thFloor,BuildingB,BaseusIntelligencePark,No.2008,XuegangRd,Gangtou Community,BantianStreet,LonggangDistrict,Shenzhen. EquipmentUnderTest(EUT): Product:BaseusSmoothWritingWirelessStylusChargingCase ModelNo.:BS-PS007 TestModelNo.:BS-PS007 BrandName:Baseus FCCID:2A482-BS-PS007 Standards:47CFRPart15,SubpartC DateofReceipt:2022-7-15 DateofTest:2022-7-15to2022-7-27 DateofIssue: 2022-7-29 TestResult:PASS* *Intheconfigurationtested,theEUTcompliedwiththestandardsspecifiedabove TestedBy: (TimoLei) ReviewedBy: (KLiao) ApprovedBy: (JackAi) ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20220701207E-01 Page: 2 of 25 1Version RevisionHistoryOfReport ReportNo.Version Description IssueDate CQASZ20220701207E-01Rev.01 Initialreport 2022-7-29 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20220701207E-01 Page: 3 of 25 2TestSummary TestItemTestRequirementTestmethodResult AntennaRequirement 47CFRPart15,SubpartCSection 15.203 ANSIC63.102013PASS ACPowerLine Conducted Emission 47CFRPart15,SubpartCSection 15.207 ANSIC63.102013PASS 20dBOccupied Bandwidth 47CFRPart15,SubpartCSection 15.215 ANSIC63.102013PASS RadiatedEmission, RadiatedSpurious Emissions 47CFRPart15,SubpartCSection 15.209 ANSIC63.102013PASS ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20220701207E-01 Page: 4 of 25 3Contents Page 1VERSION..........................................................................................................................................................................2 2TESTSUMMARY............................................................................................................................................................3 3CONTENTS......................................................................................................................................................................4 4GENERALINFORMATION...........................................................................................................................................5 4.1CLIENTINFORMATION.................................................................................................................................................5 4.2GENERALDESCRIPTIONOFEUT.................................................................................................................................5 4.3PRODUCTSPECIFICATIONSUBJECTIVETOTHISSTANDARD........................................................................................5 4.4TESTENVIRONMENT...................................................................................................................................................6 4.5DESCRIPTIONOFSUPPORTUNITS...............................................................................................................................6 4.6STATEMENTOFTHEMEASUREMENTUNCERTAINTY....................................................................................................7 4.7TESTLOCATION..........................................................................................................................................................7 4.8TESTFACILITY............................................................................................................................................................7 4.9DEVIATIONFROMSTANDARDS....................................................................................................................................7 4.10OTHERINFORMATIONREQUESTEDBYTHECUSTOMER............................................................................................7 4.11EQUIPMENTLIST.......................................................................................................................................................8 5TESTRESULTSANDMEASUREMENTDATA.......................................................................................................9 5.1ANTENNAREQUIREMENT............................................................................................................................................9 5.2CONDUCTEDEMISSIONS............................................................................................................................................10 5.320DBOCCUPYBANDWIDTH......................................................................................................................................13 5.4RADIATEDSPURIOUSEMISSION&RESTRICTEDBANDS...........................................................................................15 5.4.1SpuriousEmissions......................................................................................................................................15 6PHOTOGRAPHS-EUTTESTSETUP.....................................................................................................................20 6.1RADIATEDEMISSION.................................................................................................................................................20 6.2CONDUCTEDEMISSION..............................................................................................................................................21 7PHOTOGRAPHS-EUTCONSTRUCTIONALDETAILS......................................................................................22 ShenzhenHuaxiaTestingTechnologyCo.,Ltd. ReportNo.:CQASZ20220701207E-01 Page: 5 of 25 4GeneralInformation 4.1ClientInformation Applicant:ShenzhenBaseusTechnologyCo.,Ltd. Add…

Text truncated - open the document above for the full version.

1Photographs-EUTTestSetup 1.1RadiatedEmission 9kHz~30MHz: 30MHz~1GHz: 1.2 ConductedEmission