2A482-E00341Power Bank

E00341

Shenzhen Baseus Technology Co., Ltd. (2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China.) Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: (2026/4/15) 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2A482-E00341 Shenzhen Baseus Technology Co., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Tiffany Luo Title: Certified Engineer Address: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China. Tel.: +86-13480668369 Email: [email protected]

1 | P a g e Shenzhen Baseus Technology Co., Ltd. (2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China.) Attestation Statements To: Federal Communications Commission Date: (2026/5/9) 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: [2A482-E00341] Product Name: [Power Bank] This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Applicant Signature Printed Name: Tiffany Luo Title: Certified Engineer Address: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China. 2 | P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. Compliance ☒ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) See attached “SBoM“ Note:The SBoM content is limited to the scope of covered list software (e.g. antivirus and cybersecurity software). ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check

Rev 1/26/2023 Shenzhen Baseus Technology Co., Ltd. 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen,China. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2026/4/20 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2A482-E00341 Applicant FRN: 0032035966 [Shenzhen Baseus Technology Co., Ltd.] certifies that, as of the date of the filing of the application, [Wedo Group ] is our designated U.S. agent for service of process for the above referenced FCC ID. [Shenzhen Baseus Technology Co., Ltd.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. [Wedo Group ] accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Company Name: Wedo Group FRN: 0037730611 Address: 710 Arabian Ln Walnut, CA 91789, United States Contact Person: Jeffrey Chen Phone: (323) 528-1888 Email: [email protected] Sincerely, [Shenzhen Baseus Technology Co., Ltd.] Wedo Group [Tiffany Luo] Jeffrey Chen

Shenzhen Baseus Technology Co., Ltd. (2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China.) (2026/4/15) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for: FCC ID: 2A482-E00341 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request permanent confidential treatment of the exhibits accompanying this certification application as outlined below : ⎯ Block Diagram ⎯ Schematics ⎯ Operational Description The above exhibits contain trade secrets and/or proprietary information that are not publicly available and materials that the Applicant has spent considerable efforts in developing. Public disclosure of these may be harmful to the Applicant and give an unfair advantage to competitors on the market. Sincerely, (Signature) Title: Certified Engineer Address: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China. Tel.: +86-13480668369 Email: [email protected]

Shenzhen Baseus Technology Co., Ltd. (2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China.) (2026/4/15) Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2A482-E00341 I, the undersigned, hereby authorize (Shenzhen STS Test Services Co., Ltd.) to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by (Shenzhen STS Test Services Co., Ltd.) shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with (Shenzhen Baseus Technology Co., Ltd.). We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, (Signature) (Full name of contact person listed on FCC’s website): Tiffany Luo (Title): Certified Engineer Tel: +86-13480668369 Fax: / Email: [email protected]

Page 1 of 9 FCC ID：2A482-E00341 External Photos Page 2 of 9 FCC ID：2A482-E00341 Page 3 of 9 FCC ID：2A482-E00341 Page 4 of 9 FCC ID：2A482-E00341

制图： 修改点： 设计审核： 内容审核： 黄俊杰 梁刚耀 罗飞启 PG3 v1.102026.01.27 AM71 卡片AIR OS10000毫安 倍思L OGO 颜色： 钛色 - 工艺：丝印亮油 颜色： 星际黑 - 工艺：丝印亮油 颜色： 天蓝色 - 工艺：丝印亮油 磁吸图案 颜色： 背板蓝色加深30% 工艺： 丝印哑面 产品信息 工艺： 丝印哑面 以上为放大检查信息用 非1：1 数据线快充标识 颜色： 钛色 - 工艺： 丝印亮油 颜色： 星际黑 - 工艺：丝印亮油 颜色： 天蓝色 - 工艺：丝印亮油 NF C区域丝印 蓝色： 背板蓝色加深15% 字体： 白色 5.16 mm 24 mm 3.85 mm 10.13 mm Power Bank Model/品番： E00341 Capacity/容量：10000mAh 3.6V/36Wh USB-C Input/入力：5V⎓3A;9V⎓2.22A; USB-C Output/出力：5V⎓2.4A; 9V⎓3A; 10V⎓2.25A; 12V⎓2.5A Wireless Output/出力：5W/7.5W/10W/15W/25W Total Output/合計出力：5V⎓3A Manufacturer：Shenzhen Baseus Technology Co., Ltd. Add:2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd,Gangtou Community, Bantian Street, Longgang District, Shenzhen Made in China FCC ID：2A482-E00341 SN：JX341261KN6118 INP11/62/81-2

Page 5 of 9 FCC ID：2A482-E00341 Internal Photos Antenna Page 6 of 9 FCC ID：2A482-E00341 Page 7 of 9 FCC ID：2A482-E00341 Page 8 of 9 FCC ID：2A482-E00341 Page 9 of 9 FCC ID：2A482-E00341

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. MPE Test Report Report No.: STS2603337H01 Issued for Shenzhen Baseus Technology Co., Ltd. 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China. Product Name: Power Bank Brand Name: baseus Model Name: E00341 Series Model(s): N/A FCC ID: 2A482-E00341 Test Standard: FCC CFR 47 part 1, 1.1310 Page 2 of 19 Report No.: STS2603337H01 Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) TEST RESULT CERTIFICATION Applicant’s Name ....................: Shenzhen Baseus Technology Co., Ltd. Address ...................................: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China. Manufacturer's Name ..............: Shenzhen Baseus Technology Co., Ltd. Address ...................................: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China. Product Description Product Name .........................: Power Bank Brand Name ............................: baseus Model Name ..........................: E00341 Series Model(s) .......................: N/A Standards ................................: FCC CFR 47 part 1, 1.1310 Test Procedure ......................: KDB 680106 D01 Wireless Power Transfer v04 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test .............................: Date of receipt of test item ......: 03 Mar. 2026 Date of performance of tests ..: 03 Mar. 2026 to 10 Mar. 2026 Date of Issue ...........................: 10 Mar. 2026 Test Result...............................: Pass Page 3 of 19 Report No.: STS2603337H01 Table of Contents Page 1. SUMMARY OF TEST RESULTS 5 1.1 TEST FACTORY 5 1.2 MEASUREMENT UNCERTAINTY 5 1.3 GENERAL DESCRIPTION OF THE EUT 6 1.5 EQUIPMENTS LIST FOR ALL TEST ITEMS 7 1.6 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 7 2. COIL SPECIFICATIONS 8 2.1 COIL SIZE 8 2.2 LOCATION(S) – COIL TO THE OUTER SURFACE OF THE ENCLOSURE(S) 8 3. MAXIMUM PERMISSIBLE EXPOSURE 9 3.1MEASURING STANDARD 9 3.2 REQUIREMENTS 9 3.3TEST PROCEDURE 11 3.4 TEST SETUP 11 3.5 TEST RESULTS 12 3.6 MAXIMUM PERMISSIBLE EXPOSURE 14 Page 4 of 19 Report No.: STS2603337H01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 10 Mar. 2026 STS2603337H01 ALL Initial Issue Page 5 of 19 Report No.: STS2603337H01 1. SUMMARY OF TEST RESULTS 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ±U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainly 1 H-filed ±0.83dB 2 E-filed ±0.91dB Page 6 of 19 Report No.: STS2603337H01 1.3 GENERAL DESCRIPTION OF THE EUT Product Name Power Bank Brand baseus Model Number E00341 Series Model(s) N/A Model Difference N/A Equipemnt Category Non-ISM frequency Antenna Type loop coil antenna Operating frequency 110.5kHz-148.5kHz, 360kHz Modulation Type ASK Power Rating Input: DC 5V/3A, DC 9V/2.22A Output: DC 5V/2.4A, DC 9V/3A, DC 10V/2.25A, DC 12V/2.5A Total Output: 5V/3A Wireless Output: 5W/7.5W/10W/15W/25W Battery: DC 3.6V Adapter N/A Battery DC 3.6V Wireless charging power 25W Max Hardware version number N/A Software version number N/A Connecting I/O Port(s) Please refer to the Note 1. Note: 1. For a more detailed features description, please refer to the manufacturer’s specifications or the User Manual. 2. Table for Filed Antenna Ant. Brand Model Name Antenna Type Connector NOTE 1 N/A N/A loop coil antenna N/A Antenna The EUT antenna is Coil Antenna. No antenna other than that furnished by the responsible party shall be used with the device. Page 7 of 19 Report No.: STS2603337H01 1.4 DESCRIPTION OF THE TEST MODES Equipment under test was operated during the measurement under the following conditions: Test Mode Description Mode 1 AC Adapter + EUT + Load(5W, 110.5-148.5kHz) (Battery Status: < 1%) Record Mode 2 AC Adapter + EUT + Load(5W, 110.5-148.5kHz) (Battery Status: < 50%) Record Mode 3 AC Adapter + EUT + Load(5W, 110.5-148.5kHz) (Battery Status: < 99%) Record Mode 4 EUT + Load(15W, 110.5-148.5kHz) (Battery Status: < 1%) Record Mode 5 EUT + Load(15W, 110.5-148.5kHz) (Battery Status: < 50%) Pre-tested Mode 6 EUT + Load(15W, 110.5-148.5kHz) (Battery Status: < 99%) Pre-tested Mode 7 EUT + Load(25W, 360kHz) (Battery Status: < 1%) Record Mode 8 EUT + Load(25W, 360kHz) (Battery Status: < 50%) Pre-tested Mode 9 EUT + Load(25W, 360kHz) (Battery Status: < 99%) Pre-tested Mode 10 Test the EUT in idle mode. Pre-tested Note: All test modes were pre-tested, but we only recorded the worst case in this report. 1.5 EQUIPMENTS LIST FOR ALL TEST ITEMS Kind of Equipment Manufacturer Type No. Serial No. Last calibration Calibrated until Electric and Magnetic field Probe - Analyzer NARDA EHP-200A 180ZX10220 2026.02.04 2027.02.03 1.6 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS Item Equipment Mfr/Brand Model/Type No. Note…

Text truncated - open the document above for the full version.

Page1 of 4 DONGGUANFineElectronicCO..LTD. 东莞市泛亚电子有限公司TEL：0769-22490287FAX：0769-22499451 承认书 SPECIFICATIONFORAPPROVAL 客戶： CUSTOMER: F033 客戶料号： CUSTP/N: 0403003-0167 泛亚料号： FINEP/N: FYF033009 产品型号： DESC: FYF0332026022601 日期： DATE: 2026/02/28 版本： Version: A.0 CUSTOMERAUTHORIZEDSIGNATURE/客户承认签核 拟制 PREPAREDBY 审核 CHECKEDBY 批准 APPROVEDBY 黄冰冰叶乐妹胡伟 东莞市泛亚电子有限公司 DONGGUANFineElectronicCO..LTD. 地址：东莞市石碣镇刘屋科技东路 194 号 TEL ： 0769-22490287/22452492 FAX ： 0769-22499451 E-mail ： [email protected] Page2 of 4 DONGGUANFineElectronicCO..LTD. 东莞市泛亚电子有限公司TEL：0769-22490287FAX：0769-22499451 版本变更履历 VersionChangeHistory 版本 Rev. 变更前 BeforeChange 变更后 AfterChange 更改日期 Change Date 批准 ApprovedBy A.0 新发行 ---- 2026/02/28胡伟 Page3 of 4 DONGGUANFineElectronicCO..LTD. 东莞市泛亚电子有限公司TEL：0769-22490287FAX：0769-22499451 SPECIFICATION 产品型号： DESC FYF0332026022601 版本 Rev：A.0 客戶CUST: F033 泛亚料号FineP/N： FYF033009 客户料号CUSTP/N: 0403003-0167 一、尺寸DIMENSION:(mm) 二、原理图SCHEMATICDIAGRAM: A21.8±0.5 B39±0.5 C42.4±0.2 D43±1 E2-4 F0.8±0.1 G1.65Max（不含离型纸） 三、绕线参数WindingSpecification: 序号 NO. 端子 TERMINAL 线径 WIRE 圈数 Turns 绕线方向 WindingDirection 1SF AWG40*65P 11TsCCW 四、电气特性ELECTRICALCHARACTERISTICS: 温度TEMPERATURE:25±10°C,湿度RELATIVEHUMIDITY:65±20% 序号 NO. 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TESTFREQUENCY 测试仪器 TESTEQUIPMENTS 1IND.S-F8.1 u H±5%100KHz/1.0VTH2829LX 2DCRS-F75mΩMax100KHz/1.0VTH2829LX 3Q值S-F60Min100KHz/1.0VTH2829LX 拟制/日期 PREPAREDBY/DATE 审核/日期 CHECKEDBY/DATE 批准/日期 APPROVEDBY/DATE 黄冰冰2026/02/28叶乐妹2026/02/28 锡头管控1.8*1.2Max Page4 of 4 DONGGUANFineElectronicCO..LTD. 东莞市泛亚电子有限公司TEL：0769-22490287FAX：0769-22499451 SPECIFICATION 产品型号： DESC FYF0332026022601 版本 Rev：A.0 客戶CUST: F033 泛亚料号FineP/N： FYF033009 客户料号CUSTP/N: 0403003-0167 五、包装PACKONG: 5.1包装图片Packingpictures: 5.2包装数量及规格PackingQuantity: 5.3包装以现有包装盘为参照标准，以实际出货包装为准,如有特需要求可以定制。 Thepackagingshallbebasedontheexistingpackingplateandtheactualdeliverypackageshallprevail.If thereisanyrequirement,wecancustomizeit. 六、材料清单Materiallist: 序号 number 材料名称 Materialname 品名描述 Description 制造商 Manufacturer 1 线径 AWG40*65P 2 无铅锡条 无铅锡条 3 10层纳米晶（包边）φ42.4*0.30 4 高温胶带 3 5 小磁片 Φ20*1.0 6 背胶Φ38*22*0.08 7 高温胶带8 项目Item数量Quantity材料规格Material 盒Box 240PCS370*265*55mm40格 箱BigCarton1200PCS400*280*310mm 拟制 / 日期 PREPAREDBY/DATE 审核 / 日期 CHECKEDBY/DATE 批准 / 日期 APPROVEDBY/DATE 黄冰冰 2026/02/28 叶乐妹 2026/02/28 胡伟 2026/02/28 Test Report No.: SZXEC24001762603 Date: Jun 25, 2024 Page 1 of 6 Signed for and on behalf of SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Tina Fan Approved Signatory Client Name: DONGGUAN FINE ELECTRONICS LIMITED Client Address: 194 KEJI EAST ROAD, SHIJIE TOWN, DONGGUAN CITY, GUANGDONG PROVINCE Sample Name: Coil The above sample(s) and information were provided by the client. ----------------------------------------------------------------------------------------------------------------------------- ---------------- SGS Job No.: SZP24-024492 Sample Receiving Date: Jun 04, 2024 Testing Period: Jun 04, 2024 ~ Jun 12, 2024 Test Requested: Select test(s) as requested by the client. Test Method(s): Please refer to next page(s). Test Result(s): Please refer to next page(s). Test Requirement Conclusion Halogen See Results Test Report No.: SZXEC24001762603 Date: Jun 25, 2024 Page 2 of 6 Test Result(s): Test Part Description： SN ID Sample No. SGS Sample ID Description SN1 A1 SZX24-0017626-0001.C001 Copper-colored metal wire with colorless transparent surface A1# SN2 A2 SZX24-0017626-0001.C002 Silvery metal wire with red surface A2# SN3 A3 SZX24-0017626-0001.C003 White material A3# SN4 A4 SZX24-0017626-0001.C004 White material A4# SN5 A5 SZX24-0017626-0001.C005 Dark grey core A5# SN6 A6 SZX24-0017626-0001.C006 Silvery metal A6# Remarks: (1) 1 mg/kg = 1 ppm = 0.0001% (2) MDL = Method Detection Limit (3) ND = Not Detected (< MDL) (4) “-” = Not Regulated Halogen Test Method: With reference to EN 14582:2016, analysis was performed by IC. Test Item(s) Unit(s) MDL A1 A2 A3 Fluorine(F) mg/kg 20 ND ND ND Chlorine(Cl) mg/kg 50 ND ND ND Bromine(Br) mg/kg 50 ND ND ND Iodine(I) mg/kg 50 ND ND ND Test Item(s) Unit(s) MDL A4 A5 A6 Fluorine(F) mg/kg 20 ND ND ND Chlorine(Cl) mg/kg 50 ND ND ND Bromine(Br) mg/kg 50 ND ND ND Iodine(I) mg/kg 50 ND ND ND Unless otherwise stated, the decision rule for conformity reporting is based on Binary Statement for Simple Acceptance Rule (w=0) stated in ILAC-G8:09/2019. Test Report No.: SZXEC24001762603 Date: Jun 25, 2024 Page 3 of 6 ATTACHMENTS Halogen Testing Flow Chart Sample cutting/preparation Sample measurement Combustion in a closed system containing oxygen Dissolved in an absorption solution Filtration Analyzed by ion chromatography. Double confirm by other instruments, if necessary DATA Test Report No.: SZXEC24001762603 Date: Jun 25, 2024 Page 4 of 6 Sample Photo: SZX24-0017626-0001.C001 SZX24-0017626-0001.C002 Test Report No.: SZXEC24001762603 Date: Jun 25, 2024 Page 5 of 6 SZX24-0017626-0001.C003 SZX24-0017626-0001.C004 Test Report No.: SZXEC24001762603 Date: Jun 25, 2024 Page 6 of 6 SZX24-0017626-0001.C005 SZX24-0017626-0001.C006 SGS authenticate the photo on original report only *** End of Report *** Test Report No.: SZXEC24001762601 Date: Jun 25, 2024 Page 1 of 12 Signed for and on behalf of SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Tina Fan Approved Signatory Client Name: DONGGUAN FINE ELECTRONICS LIMITED Client Address: 194 KEJI EAST ROAD, SHIJIE TOWN, DONGGUAN CITY, GUANGDONG PROVINCE Sample Name: Coil The above sample(s) and information were provided by the client. ----------------------------------------------------------------------------------------------------------------------------- ---------------- SGS Job No.: SZP24-024492 Sample Receiving Date: Jun 04, 2024 Testing Period: Jun 04, 2024 ~ Jun 12, 2024 Test Requested: Select test(s) as requested by the client. Test Method(s): Please refer to next page(s). Test Result(s): Please refer to next page(s). Test Requirement Conclusion EU RoHS Directive (EU) 2015/863 amending Annex II to Directive 2011/65/EU - …

Text truncated - open the document above for the full version.

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.: STS2603337W01 Issued for Shenzhen Baseus Technology Co., Ltd. 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China. Product Name: Power Bank Brand Name: baseus Model Name: E00341 Series Model(s): N/A FCC ID: 2A482-E00341 Test Standards: FCC Part 15 Subpart C Page 2 of 29 Report No.: STS2603337W01 TEST REPORT Applicant’s Name .................... : Shenzhen Baseus Technology Co., Ltd. Address ................................... : 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China. Manufacturer's Name.............. : Shenzhen Baseus Technology Co., Ltd. Address ................................... : 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China. Product Description Product Name ......................... : Power Bank Brand ....................................... : baseus Model Number ........................ : E00341 Series Model(s) ....................... : N/A Test Standards ...................... : FCC Part 15 Subpart C Test Procedure ........................ : ANSI C63.10-2020+Cor 1-2023 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ................................. : Date of receipt of test item .......... : 03 Mar. 2026 Date (s) of performance of tests . : 03 Mar. 2026 to 10 Mar. 2026 Date of Issue ................................ : 10 Mar. 2026 Test Result .................................... : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 29 Report No.: STS2603337W01 Table of Contents Page 1. SUMMARY OF TEST RESULTS 5 1.1 TEST FACTORY 5 1.2 MEASUREMENT UNCERTAINTY 5 2. GENERAL INFORMATION 6 2.1 GENERAL DESCRIPTION OF THE EUT 6 2.2 DESCRIPTION OF THE TEST MODES 7 2.3 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 8 2.4 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 9 2.5 EQUIPMENTS LIST FOR ALL TEST ITEMS 10 3. CONDUCTED EMISSION TEST RESULT (SECTION 15.207) 11 3.1 POWER LINE CONDUCTED EMISSION LIMITS 11 3.2 TEST PROCEDURE 12 3.3 TEST SETUP 12 3.4 EUT OPERATING CONDITIONS 12 3.5 TEST RESULTS 13 4. RADIATED& FIELD EMISSION TEST RESULT (SECTIOU 15.209) 15 4.1 LIMIT 15 4.2 TEST PROCEDURE 15 4.3 TEST SETUP 16 4.4 TEST RESULTS 17 5. 20 DB BANDWIDTH TEST 26 5.1 LIMIT 26 5.2 TEST SETUP 26 5.3 TEST RESULTS 27 6. ANTENNA REQUIREMENTS 28 6.1 LIMIT 28 6.2 TEST RESULTS 28 APPENDIX-PHOTOS OF TEST SETUP 29 Page 4 of 29 Report No.: STS2603337W01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 10 Mar. 2026 STS2603337W01 ALL Initial Issue Page 5 of 29 Report No.: STS2603337W01 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 , Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS 15.209(a) Radiated emission, Spurious Emission PASS 2.1049 20 dB Bandwidth PASS 15.203 Antenna Requirement PASS 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ±U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 RF output power, conducted ±0.755dB 2 Unwanted Emissions, conducted ±2.874dB 3 All emissions, radiated 9K-30MHz ±3.80dB 4 All emissions, radiated 30M-1GHz ±4.18dB 5 All emissions, radiated 1G-6GHz ±4.90dB 6 All emissions, radiated>6G ±5.24dB 7 Conducted Emission (9KHz-150KHz) ±2.19dB 8 Conducted Emission (150KHz-30MHz) ±2.53dB 9 Occupied Channel Bandwidth ±3.5% 10 Power Spectral Density, conducted ±1.245dB 11 Duty Cycle ±3.2% Page 6 of 29 Report No.: STS2603337W01 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF THE EUT Product Name Power Bank Brand baseus Model Number E00341 Series Model(s) N/A Model Difference N/A Equipemnt Category Non-ISM frequency Antenna Type loop coil antenna Operating frequency 110.5kHz-148.5kHz, 360kHz Modulation Type ASK Power Rating Input: DC 5V/3A, DC 9V/2.22A Output: DC 5V/2.4A, DC 9V/3A, DC 10V/2.25A, DC 12V/2.5A Total Output: 5V/3A Wireless Output: 5W/7.5W/10W/15W/25W Battery: DC 3.6V Adapter N/A Battery DC 3.6V Wireless charging power 25W Max Hardware version number N/A Software version number N/A Connecting I/O Port(s) Please refer to the Note 1. Note: 1. For a more detailed features description, please refer to the manufacturer’s specifications or the User Manual. 2. Table for Filed Antenna Ant. Brand Model Name Antenna Type Connector NOTE 1 N/A N/A loop coil antenna N/A Antenna Page 7 of 29 Report No.: STS2603337W01 2.2 DESCRIPTION OF THE TEST MODES To investigate the maximum EMI emission characteristics generates from EUT, the test system was pre-scanning tested base on the consideration of following EUT operation mode or test configuration mode which possible have effect on EMI emission level. Each of these EUT operation mode(s) or test configuration mode(s) ment…

Text truncated - open the document above for the full version.

Page 1 of 2 FCC ID: 2A482-E00341 Conducted emissions 30MHz-1GHz Page 2 of 2 FCC ID: 2A482-E00341 9kHz-30MHz