2A482-PPBLD2-65Power Bank

Shenzhen Baseus Technology Co., Ltd. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Shenzhen Baseus Technology Co., Ltd. Address: 2nd Floor, Building B, Baseus Intelligence Park, No. 2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen City, China. Product Name: Power Bank FCC ID:2A482-PPBLD2-65 Model(s): PPBLD2-65 2.911(d)(5)(i) Equipment Type We, [Shenzhen Baseus Technology Co., Ltd] (“the applicant”) certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Date: 2023.09.06 Title and Company name: Kathy Rasmussen/ Product Development Coordinator NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen Baseus Technology Co., Ltd. 2.911 (d)(5)(ii) Applicant Attestation v1.2 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Shenzhen Baseus Technology Co., Ltd. Address: 2nd Floor, Building B, Baseus Intelligence Park, No. 2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen City, China. Product Name: Power Bank FCC ID:2A482-PPBLD2-65 Model(s): PPBLD2-65 2.911(d)(5)(ii) Applicant filing We, [Shenzhen Baseus Technology Co., Ltd] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Date: 2023.09.06 Title and Company name: Kathy Rasmussen/ Product Development Coordinator NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Shenzhen Baseus Technology Co., Ltd. Authorization Company: Shenzhen Baseus Technology Co., Ltd. Address: 2nd Floor, Building B, Baseus Intelligence Park, No. 2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen City, China. Product Name: Power Bank Model Number(s): PPBLD2-65 Product Description: Power Bank We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2023/09/06 Name: Zhang Mao Title: Certified Engineer Company: Shenzhen Baseus Technology Co., Ltd.

Shenzhen Baseus Technology Co., Ltd. U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Oasis-Compliance. FRN:0033464157 Contact Name: James He Street Address: 3313 Verdi Dr, San Jose, City/Province/Zip: CA 95111,United States Telephone No: (202) 602-8330 Email: [email protected] This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: 2023-09-06 Signed by (Printed Name/Title): The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Shenzhen Baseus Technology Co., Ltd. Grantee Code: 2A482 FCC Registration Number (FRN): 0032035966 FCC ID:2A482-PPBLD2-65 Contact Name: Zhang Mao Street Address: 2nd Floor, Building B, Baseus Intelligence Park, No. 2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen City, China. Telephone No: +86-18098946792 Email: [email protected] Applicant Signature: Date: 2023-09-06 Signed by (Printed Name/Title): Zhang Mao / Certified Engineer

Shenzhen Baseus Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023/09/06 Subject; Request for Confidentiality FCC ID:2A482-PPBLD2-65 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Zhang Mao Title: Certified Engineer

EUT PHOTO(External Photos)

Label & label location 20mm*10mm FCC ID:2A482-PPBLD2-65 Label location

EUT PHOTO(Internal Photos) ANT ※※※※※ END OF REPORT ※※※※※

RF EXPOSURE EVALUATION METHOD FCC ID:2A482-PPBLD2-65 Applicable standard： In accordance with FCC 47 CFR part 2 (2.1093) this device has been defined as a portable device which is defined as a transmitting device designed to be used so that the radiating structure(s) of the device is/are within 20 centimeters of the body of the user. Portable devices must be evaluated using the specified in FCC 47 CFR part 2 (2.1093) and ANSI/IEEEC95.1-1992. and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528-2003. Per FCC KDB 447498 D01 v06, the 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances s 50 mm are determined by: SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm Approximate SAR Test Exclusion Power Thresholds at Selected Frequencies and Test Separation Distances are illustrated in the following Table. The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. EDR Mode Max Power(dBm) Max Power(mW) Frequency(MHz) Min. distance(mm) Calc. thresholds limit GFSK 3.02 2.00 2480 5 0.63 3.0 π/4DQPSK 3.848 2.43 2441 5 0.76 3.0 8-DPSK 4.351 2.72 2480 5 0.86 3.0 BLE Mode Max Power(dBm) Max Power(mW) Frequency(MHz) Min. distance(mm) Calc. thresholds limit GFSK 5.245 3.35 2440 5 1.05 3.0 Conclusion: 1. [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] * [√f(GHz)] < 3.0. 2. SAR Test Exclusion Thresholds is 3.0 for separation distance 5mm. Therefore, SAR test is not required.

InvertedFAntennaSpecification Summary ITEMANTSPEC ModelName2.4GANT Center Frequency HorizontalVertical 2400MHz2400MHz2500MHz2400MHz2400MHz2500MHz -1.73-0.84-0.68-6.15-3.70-2.32 MAX.Gain-0.68 PolarizationHorizontalandVertical AzimuthBeam Pattern Omni-directional Impedance50Ohm AntennaLength38.20mm ManufactureZHUHAIJIELITECHNOLOGYCO.,LTD AntennaPhoto&Length(mm) Horizontal:2400MHz2450MHz2500MHz Power(dBm) Max:0Min:-40Scale:5/div Frequency (MHz) Gain(dB) MaxMinAvg 2400-1.73178-30.0815-8.48713 2450-0.845801-38.5605-7.88012 2500-0.685586-24.0318-6.79139 Vertical:2400MHz2450MHz2500MHz Power(dBm) Max:0Min:-30Scale:5/div Frequency (MHz) Gain(dB) MaxMinAvg 2400-6.1530-24.1420-13.0295 2450-3.7054-26.5836-10.6700 2500-2.32122-30.4301-9.70536 ANTTestLabs：AttestationofGlobalComplianceCo.,Ltd.

Project No.: ZKT-2308296772E-1 Page 1 of 39 FCC TEST REPORT FCC ID:2A482-PPBLD2-65 Report Number. .............................. : ZKT-2308296772E-1 Date of Test ........................................ Aug. 29, 2023 to Oct. 08, 2023 Date of issue .................................... : Oct. 08, 2023 Total number of pages ...................... 39 Test Result ..................................... : PA SS Testing Laboratory. ........................ : Shenzhen ZKT Technology Co., Ltd. Address .......................................... : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Applicant's name ......................... : Shenzhen Baseus Technology Co., Ltd. Address .......................................... : 2nd Floor, Building B, Baseus Intelligence Park, No. 2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen City, China. Manufacturer's name ................... : Shenzhen Baseus Technology Co., Ltd. Address .......................................... : 2nd Floor, Building B, Baseus Intelligence Park, No. 2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen City, China. Test specification: Standard ........................................... : FCC CFR Title 47 Part 15 Subpart C Section 15.247 ANSI C63.10:2013 Test procedure ................................. : / Non-standard test method ............. : N/A Test Report Form No. .................... : / Test Report Form(s) Originator .... : ZKT Testing Master TRF .................................... : Dated: 2020-01-06 This device described above has been tested by ZKT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of ZKT, this document may be altered or revised by ZKT, personal only, and shall be noted in the revision of the document. Product name ................................. : Power Bank Trademark ...................................... : baseus Model/Type reference......................: PPBLD2-65 Project No.: ZKT-2308296772E-1 Page 2 of 39 Testing procedure and testing location: Testing Laboratory ................................... : Shenzhen ZKT Technology Co., Ltd. Address ...................................................... : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Jim Liu Tested by (name + signature) .................... : Jeff Fu Reviewer (name + signature) ..................... : Lake Xie Approved (name + signature) .................... : Project No.: ZKT-2308296772E-1 Page 3 of 39 Table of Contents Page 1.VERSION ......................................................................................................................................... 5 2. SUMMARY OF TEST RESULT S .................................................................................................... 6 2.1 TEST FACILITY ...................................................................................................................... 7 2.2 MEASUREMENT UNCERTAINTY .......................................................................................... 7 3. GENERAL INFORMATION ............................................................................................................ 8 3.1 GENERAL DESCRIPTION OF EUT ....................................................................................... 8 3.2 DESCRIPTION OF TEST MODES ......................................................................................... 9 3.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED ..................... 9 3.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) .............................................. 9 3.5 EQUIPMENTS LIST FOR ALL TEST ITEMS ........................................................................ 10 4. EMC EMISSION TEST ................................................................................................................. 12 4.1 CONDUCTED EMISSION MEASUREMENT ....................................................................... 12 4.1.1 POWER LINE CONDUCTED EMISSION Limits ......................................................... 12 4.1.2 TEST PROCEDURE .................................................................................................... 12 4.1.3 DEVIATION FROM TEST STANDARD ....................................................................... 12 4.1.4 TEST SETUP ............................................................................................................... 13 4.1.5 EUT OPERATING CONDITIONS ................................................................................ 13 4.2.1 Radiated Emission Limits ............................................................................................. 16 4.2.2 TEST PROCEDURE .................................................................................................... 17 4.2.3 DEVIATION FROM TEST STANDARD ....................................................................... 17 4.2.4 TEST SETUP ............................................................................................................... 17 4.2.5 EUT OPERATING CONDITIONS ................................................................................ 18 5.RADIATED BAND EMISSION MEASUREMENT ......................................................................... 23 5.1 Test Requirement: .......................................................................................................... 23 5.2 TEST PROCEDURE ....................................................................................................... 23 5.3 DEVIATION FROM TEST STANDARD .......................................................................... 23 5.4 TEST SETUP .........…

Text truncated - open the document above for the full version.

EUT TEST PHOTO