2A482-PPCXM06GPower Bank

英文（EN） Baseus Magnetic Mini Air Wireless Fast Charge Power Bank 6000mAh 20W User Manual Before using the product, thoroughly read this manual. Keep the manual for future reference. 1. Warnings Improper use of the product may lead to battery malfunction or severe overheating, and may even cause fire or explosion. To avoid any damage to you and your property, please follow the instructions below when you use and store the product. 1. This is NOT a toy! Please place this product in areas that are not easily accessible by children. Do not allow children to operate this product, or accidents may occur. 2. Please charge this product with a charger approved by the local safety standards in case of danger or damage. 3. DO NOT apply pressure, and avoid collisions. The battery and circuit may be damaged if this product falls from a great height, experiences intense shocks, or is immersed in liquid; if so, please avoid using this product. 4. If this product suffers from deformation, leakage, or radical decline in performance, please stop using this product. 5. Please DO NOT charge any device or recharge this product in places that may affect its heat dissipation, such as pants pockets, enclosed bags, beds, or couches. And ensure this product is not under any cover when operating. When charging other devices for prolonged periods, DO NOT stack any device on top of this product, or it might affect its heat dissipation. 6. This product CAN NOT be disassembled, applied pressure, pierced, short-circuited, immersed in liquid, disposed of in a fire, or exposed to a high temperature or heat source with a temperature greater than 140°F(60 °C ). 7. DO NOT place this product in areas with extremely high temperatures. Such as under direct sunlight or in a vehicle with a very high interior temperature. 8. This product contains lithium batteries, DO NOT disassemble it! Or danger or battery damage may occur. 2. Attention Please fully charge this device before using it for the first time. The power banks have conversion efficiency, so the battery capacity of power bank is not equal to the rechargeable capacity. Please choose an appropriate charger for recharging this product and suitable cables when charging other devices. Please ensure some supervision is in progress when recharging this product, DO NOT charge this product without any care. Please remove the cable when done recharging this product or finished charging for any other device to preserve the product integrity. If the indication does not light up after pressing the power button, please recharge this product. Please preserve this product with a battery percentage between 25%-50% for long-term storage. Place this product in a cool and dry environment. To slow down battery aging, avoid storing this product in an empty or full charge for long-term storage. Please do not dismantle the product by yourself. Improper use or placement may compromise the service life or damage the product, to which our company will not bear any legal responsibilities nor offer any guarantee. Please understand. 3. Specifications Name: Power Bank Model No.: PPCXM06G Battery: Polymer Lithium Battery Power Capacity: 6000mAh / 22.2Wh Energy Conversion Rate: ≥75% Type-C Input: 5V/3A; 9V/2A Type-C Output: 5V/2.4A; 9V/2.22A; 12V/1.5A Wireless Output: 5W/7.5W/10W/15W Total Output: 5V/2.4A 4. Content Power bank ×1 Charging cable ×1 User manual ×1 Warranty card ×1 5. Product Schematic Design Wireless charging indicator Battery level display Wireless charging area Power switch Type-C input Type-C output 6. Description This product is a portable charging device that can provide wired and wireless charging for mobile phones, tablets, game consoles and other digital products. The product has auto-alignment for magnetic charging, and supports Apple 20W PD fast charging, Type-C dual-way fast charging, 15W wireless fast charging, etc. It has built-in FOD, overcharge, over-discharge, temperature protection and other safety protection circuits. 7. Operating Environment Operating temperature: non-tropical area, 0 °C to 35 °C Storage temperatures: 0 °C to 40 °C 8.Icon Description The 5-year icon refers to the "valid period for environment-friendly use", not the product quality assurance period. All electronic products contain toxic and harmful substances such as lead, mercury and cadmium. The overdue use of these products may lead to leakage or mutation of these toxic and harmful substances, causing environment pollution or serious damage to people and property. The term of "environment-friendly use period" means that all electronic products shall be used within this validity period. We won't be held liable for safety issues caused by using of the product beyond its safe service life. Declartion of Conformity Shenzhen Baseus Technology Co., Ltd. declares that the product is incompliance with Directive 2014/53/EU. The full text of the EU declaration ofconformity is available at the following internet address:https://eu.baseus.com/pages/euro-compliance This product can be used across EU member states. TX/RX Frequency Range: 115-205KHz(only for EU and UK) Radiated H-Field:-17.74dBμA/m@10m" FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with th…

Text truncated - open the document above for the full version.

AttestationStatements (2024/7/10) TO:FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046,USA RE:AttestationStatementsPart2.911(d)(7)requestfor(FCCID:2A482-PPCXM06G) (ShenzhenBaseusTechnologyCo.,Ltd.),theundersigned,herebyauthorizeOasis Compliance,Inc. toactasourdesignatedU.S.agentforserviceofprocess,(Shenzhen BaseusTechnologyCo.,Ltd.)acceptstomaintainanagentfornolessthanoneyear afterthegranteehasterminatedallmarketingandimportationortheconclusionofany Commission-relatedproceedinginvolvingtheequipment. OasisCompliance,Inc.acceptstheresponsibilitytoactasdesignatedU.S.agentfor serviceofprocess. ApplicantInformation： CompanyName:ShenzhenBaseusTechnologyCo.,Ltd. Address:2ndFloor,BuildingB,BaseusIntelligencePark,No.2008,XuegangRd,Gangtou Community,BantianStreet,LonggangDistrict,Shenzhen,China ContactName:TiffanyLuo FRN:0032035966 TelephoneNo:+86-13480668369 Email:[email protected] Signature [TiffanyLuo] U.S.AgentInformation: CompanyName:OasisCompliance,Inc. Address:3313VerdiDr,SanJose,CA95111,UnitedStates FRN:0033464157 ContactName:JamesHe TelephoneNo:(202)602-8330 Email:[email protected] JamesHe Signature [JamesHe]

Shenzhen Baseus Technology Co., Ltd. 2024.7.10 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen BCTC Testing Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature: Client’s name / title : Tiffany Luo / Certified Engineer Contact information / address: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China

Shenzhen Baseus Technology Co., Ltd. 2024.7.10 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: Power Bank Trademark: baseus MODEL: PPCXM06G FCC ID: 2A482-PPCXM06G To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - Block Diagram - Schematics - Operational Description required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Client’s signature: Client’s name / title : Tiffany Luo / Certified Engineer Contact information / address: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China

External Photos

制图： 修改点： 设计审核： 内容审核： 柳文辉 PG3 2024.05.30 1.10 16.5mm 1.01mm 1.01mm 9.6mm 14.18mm14.18mm 2.1mm 2.8mm 1.增加飞机标 PPCXM06G 2A482-PPCXM06G SN:QW231101 G 白色款：参考磁吸充电宝一代 白色款：参考磁吸充电宝一代 白色款：参考磁吸充电宝一代 白色款：参考磁吸充电宝一代 6000mAh 6/飞机标

Internal Photos Antenna

No.：BCTC/RF-EMC-005 Page 1 of 16 Edition：B.2 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2406806132-2E Applicant: Shenzhen Baseus Technology Co., Ltd. Product Name: Power Bank Test Model: PPCXM06G Tested Date: 2024-06-18 to 2024-06-19 Issued Date: 2024-06-27 Report No.: BCTC2406806132-2E No.：BCTC/RF-EMC-005 Page 2 of 16 Edition：B.2 FCC ID: 2A482- PPCXM06G The test report is effective only with both signature and specialized stamp.This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full.The tested sample(s) and the sample information are provided by the client. Product Name: Power Bank Trademark: baseus Model/Type Reference: PPCXM06G Prepared For: Shenzhen Baseus Technology Co., Ltd. Address: 2 nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China Manufacturer: Shenzhen Baseus Technology Co., Ltd. Address: 2 nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China. Sample Received Date: 2024-06-18 Sample Tested Date: 2024-06-18 to 2024-06-19 Issue Date: 2024-06-27 Report No.: BCTC2406806132-2E Test Standards: FCC CFR 47 part1, 1.1307(b), 1.1310 Test Results: PASS Tested by: Approved by: Shanshan. Zhang / Project Handler Zero Zhou/Reviewer Report No.: BCTC2406806132-2E No.：BCTC/RF-EMC-005 Page 3 of 16 Edition：B.2 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 4 2. Product Information ............................................................................................... 5 2.1 Product Information ............................................................................................... 5 2.2 Support Equipment ............................................................................................... 5 2.3 Test Mode ............................................................................................................. 6 3. Test Facility And Test Instrument Used ................................................................. 7 3.1 Test Facility ........................................................................................................... 7 3.2 Test Instrument Used ............................................................................................ 7 4. Method Of Measurement ....................................................................................... 8 4.1 Applicable Standard .............................................................................................. 8 4.2 Block Diagram Of Test Setup ................................................................................ 8 4.3 Limit ...................................................................................................................... 9 4.4 Test procedure ...................................................................................................... 9 4.5 Equipment Approval Considerations ................................................................... 10 4.6 E and H field Strength ......................................................................................... 11 5. Photographs Of Test Set-Up ............................................................................... 15 (Note: N/A Means Not Applicable) Report No.: BCTC2406806132-2E No.：BCTC/RF-EMC-005 Page 4 of 16 Edition：B.2 1. Version Report No. Issue Date Description Approved BCTC2406806132-2E 2024-06-27 Original Valid Report No.: BCTC2406806132-2E No.：BCTC/RF-EMC-005 Page 5 of 16 Edition：B.2 2. Product Information 2.1 Product Information Model/Type Reference: PPCXM06G Model Differences: N/A Hardware Version: N/A Software Version: N/A Modulation: ASK Operation Frequency: 115kHz-205kHz Antenna installation: coil antenna Ratings: Type C Input: DC 5V/3A or DC 9V/2A Type C Output: DC 5V/2.4A or DC 9V/2.22A or DC 12V/1.5A Wireless Output: 5W/7.5W/10W/15W Total Output: DC 5V/2.4A(Wireless charging and type C charging work simultaneously) Battery: DC 3.7V 2.2 Support Equipment No. Device Type Brand Model Series No. Note E-1 Power Bank N/A PPCXM06G N/A EUT E-2 ADAPTER Hoco. N18 N/A Auxiliary E-3 Dummy load N/A DL01 N/A Auxiliary Notes: 1. All the equipment/cables were placed in the worst-case configuration to maximize the emission during the test. 2. Grounding was established in accordance with the manufacturer’s requirements and conditions for the intended use. Report No.: BCTC2406806132-2E No.：BCTC/RF-EMC-005 Page 6 of 16 Edition：B.2 2.3 Test Mode AC Mode Mode 1 Charging+Full Load Mode 2 Charging+Half Load Mode 3 Charging+Null Load DC Mode Mode 4 Full Load Mode 5 Half Load Mode 6 Null Load Note: All test mode were tested and passed, only shows the worst case mode which were recorded in this report. Report No.: BCTC2406806132-2E No.：BCTC/RF-EMC-005 Page 7 of 16 Edition：B.2 3. Test Facility And Test Instrument Used 3.1 Test Facility All measurement facilities used to collect the measurement data are located at Shenzhen BCTC Testing Co., Ltd. Address:1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China. The site and apparatus are constructed in conformance with the requirements of ANSI C63.4 and CISPR 16-1-1 other equivalent standards. FCC Test Firm Registration Number: 712850 A2LA certificate registration number is: CN1212 ISED Registered No.: 23583 ISED CAB identifier: CN0017 3.2 Test Instrument Used EMF Test Equipment Manufacturer Model# Serial# Last Cal. Next Cal. Electromagnet -ic r…

Text truncated - open the document above for the full version.

深圳市深联宇电子有限公司 Shenzhen Shenlian Yu Electronics Co., LTD 产品规格承认书 客户名称： CUSTOMER 客户品名： Product Name ofCustomer 我方产品名（材质）： Product Mame ofOurs(Ma tenial) A11双槽43*0.5MM正面贴黑膜出线43MM背胶 承 认： APPROVED 核准： 制表： 日期： APPROVED邓湘 DRAWN 赖伟DATE 2024.1.16 地址：深圳市宝安区松岗溪头社区工业1路3号 电话：15112322462 传真：0755-29909524 乔威 XM06A 变更记录 REVISED RECORD PEVISON NO 版次 DATE 日期 REVISE DESCRIPTION 变更内容描述 Change person 变更人 REV:01 REV:02 ESCRINED 拟制 CHECKED 审核 APPROVED 批准 PACE 页 码 赖伟 邓湘 陈展良 * Dimension without tolerance is approx. 3. Coils Specification 3-1. Connection (Bottom View) “●”START Note： * Dimension without tolerance is approx. 1. Connection (Bottom View) Spec. No.Spec. No. Unit: mm Specifcation 规 格 内 容 CUSTOMERP/N: 客户名称 PARTNUMBER： 制造商料号 5.WINDING DETAILS(绕线详细说明）： 6.ELECTRICAL CHARACTERISTICS(电气特性）： PARAMETERS UNIN LIMTI Inductance ls@100KHz/1v uh ±5% Q @100KHz/1v 55-90 DCR @100KHz/1v mΩ 60MAX Wdy.NO. 绕 组 Start 开始 Finish 结束 Turns 圈数 Wire Dia 线径 Wdg.TyepeSprad/lose 绕线方法疏/密绕 Wdg.Direction 绕线方向 Turns/Layer 层数/每层圈数 S F 11TS 0.08*72P 漆包线 单层密绕 逆时针 1层/11TS APPROVED BY 承 认 CHECKED BY 审 查 PREPARED BY 制 作 DATE 日期 PAGE 页码 赖伟 2023.1.16 6.8 MATERIAL LIST 材 料 清 单 CUSTOMER P/N: 客 户 品 名 PARTNUMBER： 制造商料号 NO. Material name 材料名称 Description 品名描述 Manufacturer 制造商 Material 材质 1 丝包线 0.08*72P 2 无铅锡条 高温 3 磁片 43*0.5 4 高温胶带 8mm APPROVED BY 承 认 CHECKED BY 审 查 PREPARED BY 制作 DATE 日期 PAGE 页码 赖伟 2024.1.16 5 黑膜 40*0.03mm

No.：BCTC/RF-EMC-005 Page 1 of 28 Edition：B.2 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2406806132-1E Applicant: Shenzhen Baseus Technology Co., Ltd. Product Name: Power Bank Test Model: PPCXM06G Tested Date: 2024-06-18 to 2024-06-19 Issued Date: 2024-06-27 Report No.: BCTC2406806132-1E No.：BCTC/RF-EMC-005 Page 2 of 28 Edition：B.2 FCC ID: 2A482-PPCXM06G The test report is effective only with both signature and specialized stamp.This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full.The tested sample(s) and the sample information are provided by the client. Product Name: Power Bank Trademark: baseus Model/Type Reference: PPCXM06G Prepared For: Shenzhen Baseus Technology Co., Ltd. Address: 2 nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China Manufacturer: Shenzhen Baseus Technology Co., Ltd. Address: 2 nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China. Sample Received Date: 2024-06-18 Sample Tested Date: 2024-06-18 to 2024-06-19 Issue Date: 2024-06-27 Report No.: BCTC2406806132-1E Test Standards: FCC Part15.209 ANSI C63.10-2013 Test Results: PASS Tested by: Approved by: Shanshan. Zhang / Project Handler Zero Zhou/Reviewer Report No.: BCTC2406806132-1E No.：BCTC/RF-EMC-005 Page 3 of 28 Edition：B.2 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 4 2. Test Summary ....................................................................................................... 5 3. Measurement Uncertainty ..................................................................................... 6 4. Product Information And Test Setup ..................................................................... 7 4.1 Product Information ............................................................................................... 7 4.2 Support Equipment ............................................................................................... 7 4.3 Test Setup Configuration ...................................................................................... 8 4.4 Test Mode ............................................................................................................. 9 5. Test Facility And Test Instrument Used ............................................................... 10 5.1 Test Facility ......................................................................................................... 10 5.2 Test Instrument Used .......................................................................................... 10 6. Conducted Emissions .......................................................................................... 12 6.1 Block Diagram Of Test Setup .............................................................................. 12 6.2 Limit .................................................................................................................... 12 6.3 Test procedure .................................................................................................... 12 6.4 EUT operating Conditions ................................................................................... 12 6.5 Test Result .......................................................................................................... 13 7. Radiated Emissions ............................................................................................. 15 7.1 Block Diagram Of Test Setup .............................................................................. 15 7.2 Limit .................................................................................................................... 16 7.3 Test procedure .................................................................................................... 16 7.4 Test Result .......................................................................................................... 17 8. Bandwidth Test .................................................................................................... 23 8.1 Test Procedure ................................................................................................... 23 8.2 Test Setup ........................................................................................................... 23 8.3 Test Result .......................................................................................................... 23 9. Antenna Requirements ........................................................................................ 24 9.1 Limit .................................................................................................................... 24 9.2 Test Result .......................................................................................................... 24 10. EUT Photographs ................................................................................................ 25 11. EUT Test Setup Photographs.............................................................................. 26 (Note: N/A Means Not Applicable) Report No.: BCTC2406806132-1E No.：BCTC/RF-EMC-005 Page 4 of 28 Edition：B.2 1. Version Report No. Issue Date Description Approved BCTC2406806132-1E 2024-06-27 Original Valid Report No.: BCTC2406806132-1E No.：BCTC/RF-EMC-005 Page 5 of 28 Edition：B.2 2. Test Summary The Product has been tested according to the following specifications: No. Test Parameter Clause No. Results 1 Conducted Emission 15.207 PASS 2 Radiated Emission 15.209 PASS…

Text truncated - open the document above for the full version.

Conducted emissions Radiated Measurement Photos 30MHz-1GHz 9kHz-30MHz