2A482-PPCXM10TBPower Bank

-PPCXM10TA (Shenzhen Baseus Technology Co., Ltd.) (2024.7.10) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID: 2A482-PPCXM10TB) [Shenzhen Baseus Technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Applicant printed name) Tiffany Luo (Shenzhen Baseus Technology Co., Ltd.) (2024.7.10) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCC ID: 2A482-PPCXM10TB) [Shenzhen Baseus Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Tiffany Luo

AttestationStatements (2024/7/10) TO:FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046,USA RE:AttestationStatementsPart2.911(d)(7)requestfor(FCCID:2A482-PPCXM10TB) (ShenzhenBaseusTechnologyCo.,Ltd.),theundersigned,herebyauthorizeOasis Compliance,Inc. toactasourdesignatedU.S.agentforserviceofprocess,(Shenzhen BaseusTechnologyCo.,Ltd.)acceptstomaintainanagentfornolessthanoneyear afterthegranteehasterminatedallmarketingandimportationortheconclusionofany Commission-relatedproceedinginvolvingtheequipment. OasisCompliance,Inc.acceptstheresponsibilitytoactasdesignatedU.S.agentfor serviceofprocess. ApplicantInformation： CompanyName:ShenzhenBaseusTechnologyCo.,Ltd. Address:2ndFloor,BuildingB,BaseusIntelligencePark,No.2008,XuegangRd,Gangtou Community,BantianStreet,LonggangDistrict,Shenzhen,China ContactName:TiffanyLuo FRN:0032035966 TelephoneNo:+86-13480668369 Email:[email protected] Signature [TiffanyLuo] U.S.AgentInformation: CompanyName:OasisCompliance,Inc. Address:3313VerdiDr,SanJose,CA95111,UnitedStates FRN:0033464157 ContactName:JamesHe TelephoneNo:(202)602-8330 Email:[email protected] JamesHe Signature [JamesHe]

Shenzhen Baseus Technology Co., Ltd. 2024.7.10 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen BCTC Testing Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature: Client’s name / title : Tiffany Luo / Certified Engineer Contact information / address: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China

Shenzhen Baseus Technology Co., Ltd. 2024.7.10 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: Power Bank Trademark: baseus MODEL: PPCXM10T FCC ID: 2A482-PPCXM10TB To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - Block Diagram - Schematics - Operational Description required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Client’s signature: Client’s name / title : Tiffany Luo / Certified Engineer Contact information / address: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China

External Photos

Location: Label

Internal Photos Antenna

No.：BCTC/RF-EMC-005 Page 1 of 16 Edition：B.2 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2405131127-2E Applicant: Shenzhen Baseus Technology Co., Ltd. Product Name: Power Bank Test Model: PPCXM10T Tested Date: 2024-05-24 to 2024-06-05 Issued Date: 2024-06-05 Report No.: BCTC2405131127-2E No.：BCTC/RF-EMC-005 Page 2 of 16 Edition：B.2 FCC ID: 2A482-PPCXM10TB The test report is effective only with both signature and specialized stamp.This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full.The tested sample(s) and the sample information are provided by the client. Product Name: Power Bank Trademark: baseus Model/Type Reference: PPCXM10T Prepared For: Shenzhen Baseus Technology Co., Ltd. Address: 2 nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China Manufacturer: Shenzhen Baseus Technology Co., Ltd. Address: 2 nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China. Sample Received Date: 2024-05-24 Sample Tested Date: 2024-05-24 to 2024-06-05 Issue Date: 2024-06-05 Report No.: BCTC2405131127-2E Test Standards: FCC CFR 47 part1, 1.1307(b), 1.1310 Test Results: PASS Tested by: Approved by: Shanshan. Zhang / Project Handler Zero Zhou/Reviewer Report No.: BCTC2405131127-2E No.：BCTC/RF-EMC-005 Page 3 of 16 Edition：B.2 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 4 2. Product Information ............................................................................................... 5 2.1 Product Information ............................................................................................... 5 2.2 Support Equipment ............................................................................................... 5 2.3 Test Mode ............................................................................................................. 6 3. Test Facility And Test Instrument Used ................................................................. 7 3.1 Test Facility ........................................................................................................... 7 3.2 Test Instrument Used ............................................................................................ 7 4. Method Of Measurement ....................................................................................... 8 4.1 Applicable Standard .............................................................................................. 8 4.2 Block Diagram Of Test Setup ................................................................................ 8 4.3 Limit ...................................................................................................................... 9 4.4 Test procedure ...................................................................................................... 9 4.5 Equipment Approval Considerations ................................................................... 10 4.6 E and H field Strength ......................................................................................... 11 5. Photographs Of Test Set-Up ............................................................................... 15 (Note: N/A Means Not Applicable) Report No.: BCTC2405131127-2E No.：BCTC/RF-EMC-005 Page 4 of 16 Edition：B.2 1. Version Report No. Issue Date Description Approved BCTC2405131127-2E 2024-06-05 Original Valid Report No.: BCTC2405131127-2E No.：BCTC/RF-EMC-005 Page 5 of 16 Edition：B.2 2. Product Information 2.1 Product Information Model/Type Reference: PPCXM10T (Test Color: black) Model Differences: N/A Hardware Version: Main board: V1.2 Protect board: V1.1 Software Version: Main board: V1S1 Protect board: / Modulation: ASK Operation Frequency: 115kHz-205kHz Antenna installation: coil antenna Ratings: Type C Input: DC 5V/3A, DC 9V/2A, DC 12V/1.5A Type C Cable Input: DC 5V/3A, DC 9V/2A, DC 12V/1.5A Type C Output: DC 5V/3A, DC 9V/3A, DC 12V/2.5A, DC 15V/2A Wireless charging Output: 5W/7.5W/10W/15W Total Output: DC 5V/3A(Type C port and type C wire charging work simultaneously, Wireless charging and Type C(port or wire) cannot work simultaneously) Battery: DC 7.4V 2.2 Support Equipment No. Device Type Brand Model Series No. Note E-1 Power Bank N/A PPCXM10T N/A EUT E-2 ADAPTER Hoco. N18 N/A Auxiliary E-3 Dummy load N/A DL01 N/A Auxiliary Notes: 1. All the equipment/cables were placed in the worst-case configuration to maximize the emission during the test. 2. Grounding was established in accordance with the manufacturer’s requirements and conditions for the intended use. Report No.: BCTC2405131127-2E No.：BCTC/RF-EMC-005 Page 6 of 16 Edition：B.2 2.3 Test Mode AC Mode Mode 1 Wireless Charging (Full load) (5W) Mode 2 Wireless Charging (Half load) (2.5W) Mode 3 Wireless Charging (Null load) DC Mode Mode 4 Wireless Charging (Full load) (15W) Mode 5 Wireless Charging (Half load) (7.5W) Mode 6 Wireless Charging (Null load) Note: All test mode were tested and passed, only shows the worst case mode which were recorded in this report. Report No.: BCTC2405131127-2E No.：BCTC/RF-EMC-005 Page 7 of 16 Edition：B.2 3. Test Facility And Test Instrument Used 3.1 Test Facility All measurement facilities used to collect the measurement data are located at Shenzhen BCTC Testing Co., Ltd. Address:1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China. The site and apparatus are constructed in confor…

Text truncated - open the document above for the full version.

No.：BCTC/RF-EMC-005 Page 1 of 29 Edition：B.2 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2405131127-1E Applicant: Shenzhen Baseus Technology Co., Ltd. Product Name: Power Bank Test Model: PPCXM10T (Test model: black) Tested Date: 2024-05-24 to 2024-06-05 Issued Date: 2024-06-05 Report No.: BCTC2405131127-1E No.：BCTC/RF-EMC-005 Page 2 of 29 Edition：B.2 FCC ID: 2A482-PPCXM10TB The test report is effective only with both signature and specialized stamp.This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full.The tested sample(s) and the sample information are provided by the client. Product Name: Power Bank Trademark: baseus Model/Type Reference: PPCXM10T (Test model: black) Prepared For: Shenzhen Baseus Technology Co., Ltd. Address: 2 nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China Manufacturer: Shenzhen Baseus Technology Co., Ltd. Address: 2 nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China. Sample Received Date: 2024-05-24 Sample Tested Date: 2024-05-24 to 2024-06-05 Issue Date: 2024-06-05 Report No.: BCTC2405131127-1E Test Standards: FCC Part15.209 ANSI C63.10-2013 Test Results: PASS Tested by: Approved by: Shanshan. Zhang / Project Handler Zero Zhou/Reviewer Report No.: BCTC2405131127-1E No.：BCTC/RF-EMC-005 Page 3 of 29 Edition：B.2 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 4 2. Test Summary ....................................................................................................... 5 3. Measurement Uncertainty ..................................................................................... 6 4. Product Information And Test Setup ..................................................................... 7 4.1 Product Information ............................................................................................... 7 4.2 Support Equipment ............................................................................................... 7 4.3 Test Setup Configuration ...................................................................................... 8 4.4 Test Mode ............................................................................................................. 9 5. Test Facility And Test Instrument Used ............................................................... 10 5.1 Test Facility ......................................................................................................... 10 5.2 Test Instrument Used .......................................................................................... 10 6. Conducted Emissions .......................................................................................... 12 6.1 Block Diagram Of Test Setup .............................................................................. 12 6.2 Limit .................................................................................................................... 12 6.3 Test procedure .................................................................................................... 12 6.4 EUT operating Conditions ................................................................................... 12 6.5 Test Result .......................................................................................................... 13 7. Radiated Emissions ............................................................................................. 15 7.1 Block Diagram Of Test Setup .............................................................................. 15 7.2 Limit .................................................................................................................... 16 7.3 Test procedure .................................................................................................... 16 7.4 Test Result .......................................................................................................... 17 8. Bandwidth Test .................................................................................................... 23 8.1 Test Procedure ................................................................................................... 23 8.2 Test Setup ........................................................................................................... 23 8.3 Test Result .......................................................................................................... 23 9. Antenna Requirements ........................................................................................ 24 9.1 Limit .................................................................................................................... 24 9.2 Test Result .......................................................................................................... 24 10. EUT Photographs ................................................................................................ 25 11. EUT Test Setup Photographs.............................................................................. 26 (Note: N/A Means Not Applicable) Report No.: BCTC2405131127-1E No.：BCTC/RF-EMC-005 Page 4 of 29 Edition：B.2 1. Version Report No. Issue Date Description Approved BCTC2405131127-1E 2024-06-05 Original Valid Report No.: BCTC2405131127-1E No.：BCTC/RF-EMC-005 Page 5 of 29 Edition：B.2 2. Test Summary The Product has been tested according to the following specifications: No. Test Parameter Clause No. Results 1 Conducted Emission 15…

Text truncated - open the document above for the full version.

Conducted emissions Radiated Measurement Photos 30MHz-1GHz Mode 1-3 Mode 4-6 9kHz-30MHz Mode 1-3 Mode 4-6