2A482-PPNMS1030SCPower Bank

AttestationStatements (2024/8/8) TO:FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046,USA RE:AttestationStatementsPart2.911(d)(7)requestfor(FCCID:2A482-PPNMS1030SC) (ShenzhenBaseusTechnologyCo.,Ltd.),theundersigned,herebyauthorizeOasis Compliance,Inc. toactasourdesignatedU.S.agentforserviceofprocess,(Shenzhen BaseusTechnologyCo.,Ltd.)acceptstomaintainanagentfornolessthanoneyear afterthegranteehasterminatedallmarketingandimportationortheconclusionofany Commission-relatedproceedinginvolvingtheequipment. OasisCompliance,Inc.acceptstheresponsibilitytoactasdesignatedU.S.agentfor serviceofprocess. ApplicantInformation： CompanyName:ShenzhenBaseusTechnologyCo.,Ltd. Address:2ndFloor,BuildingB,BaseusIntelligencePark,No.2008,XuegangRd,Gangtou Community,BantianStreet,LonggangDistrict,Shenzhen,China ContactName:TiffanyLuo FRN:0032035966 TelephoneNo:+86-13480668369 Email:[email protected] Signature [TiffanyLuo] U.S.AgentInformation: CompanyName:OasisCompliance,Inc. Address:3313VerdiDr,SanJose,CA95111,UnitedStates FRN:0033464157 ContactName:JamesHe TelephoneNo:(202)602-8330 Email:[email protected] JamesHe Signature [JamesHe]

(Shenzhen Baseus Technology Co., Ltd.) (2024.8.8) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID: 2A482-PPNMS1030SC) [Shenzhen Baseus Technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Applicant printed name) Tiffany Luo (Shenzhen Baseus Technology Co., Ltd.) (2024.8.8) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCC ID: 2A482- PPNMS1030SC) [Shenzhen Baseus Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Tiffany Luo

Shenzhen Baseus Technology Co., Ltd. 2024.8.8 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen BCTC Testing Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature: Client’s name / title : Tiffany Luo / Certified Engineer Contact information / address: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China

Shenzhen Baseus Technology Co., Ltd. 2024.8.8 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: Power Bank Trademark: baseus MODEL: PPNMS-1030SC FCC ID: 2A482-PPNMS1030SC To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - Block Diagram - Schematics - Operational Description required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Client’s signature: Client’s name / title : Tiffany Luo / Certified Engineer Contact information / address: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China

External Photos

V2.02024.6.27 杜仲航 PG3 工艺：丝印镜面银 2.LOGO 工艺：丝印 颜色：星际黑：亮黑UV 月影灰：PANTONE COOL GRAY 4C 工艺：丝印 颜色：星际黑：亮黑UV 月影灰：PANTONE COOL GRAY 4C 工艺：丝印 颜色：星际黑：亮黑UV 月影灰：PANTONE COOL GRAY 4C 1.线标注 工艺：星际黑：PANTONE BLACK 月影灰：PANTONE COOL GRAY 4C 3.充电符号 工艺：丝印 颜色：星际黑：亮黑UV 月影灰：PANTONE COOL GRAY 4C 4.接口标注 工艺：丝印 颜色：星际黑：亮黑UV 月影灰：PANTONE COOL GRAY 4C 7.参数信息 海外-Nomos支架无线充电宝 非1：1，仅检查用 PPNMS-1030SC 居中对齐居中对齐 居中对齐 居中对齐 膜片 6.图标 5.开关符号 25.80 mm 4.00 mm 74.48 mm 9.35 mm 15.09 mm 11.01 mm 14.28 mm 7.30 mm 7.30 mm 22.00 mm 29.00 mm 29.36 mm

Internal Photos Antenna

No.：BCTC/RF-EMC-005 Page 1 of 18 Edition：B.2 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2407591621-2E Applicant: Shenzhen Baseus Technology Co., Ltd. Product Name: Power Bank Test Model: PPNMS-1030SC Tested Date: 2024-07-18 to 2024-07-23 Issued Date: 2024-07-29 Report No.: BCTC2407591621-2E No.：BCTC/RF-EMC-005 Page 2 of 18 Edition：B.2 FCC ID: 2A482-PPNMS1030SC The test report is effective only with both signature and specialized stamp.This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full.The tested sample(s) and the sample information are provided by the client. Product Name: Power Bank Trademark: baseus Model/Type Reference: PPNMS-1030SC Prepared For: Shenzhen Baseus Technology Co., Ltd. Address: 2 nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China Manufacturer: Shenzhen Baseus Technology Co., Ltd. Address: 2 nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China. Sample Received Date: 2024-07-18 Sample Tested Date: 2024-07-18 to 2024-07-23 Issue Date: 2024-07-29 Report No.: BCTC2407591621-2E Test Standards: FCC CFR 47 part1, 1.1307(b), 1.1310 Test Results: PASS Tested by: Approved by: Shanshan. Zhang / Project Handler Zero Zhou/Reviewer Report No.: BCTC2407591621-2E No.：BCTC/RF-EMC-005 Page 3 of 18 Edition：B.2 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 4 2. Product Information ............................................................................................... 5 2.1 Product Information ............................................................................................... 5 2.2 Support Equipment ............................................................................................... 5 2.3 Test Mode ............................................................................................................. 6 3. Test Facility And Test Instrument Used ................................................................. 7 3.1 Test Facility ........................................................................................................... 7 3.2 Test Instrument Used ............................................................................................ 7 4. Method Of Measurement ....................................................................................... 8 4.1 Applicable Standard .............................................................................................. 8 4.2 Block Diagram Of Test Setup ................................................................................ 8 4.3 Limit ...................................................................................................................... 9 4.4 Test procedure ...................................................................................................... 9 4.5 Equipment Approval Considerations ................................................................... 10 4.6 E and H field Strength ......................................................................................... 11 5. Photographs Of Test Set-Up ............................................................................... 17 (Note: N/A Means Not Applicable) Report No.: BCTC2407591621-2E No.：BCTC/RF-EMC-005 Page 4 of 18 Edition：B.2 1. Version Report No. Issue Date Description Approved BCTC2407591621-2E 2024-07-29 Original Valid Report No.: BCTC2407591621-2E No.：BCTC/RF-EMC-005 Page 5 of 18 Edition：B.2 2. Product Information 2.1 Product Information Model/Type Reference: PPNMS-1030SC Model Differences: N/A Hardware Version: N/A Software Version: N/A Modulation: ASK Operation Frequency: 115kHz-205kHz, 360kHz Antenna installation: loop coil antenna Ratings: USB-C/USB-C cable Input: DC 5V/3A, DC 9V/3A, DC 12V/2.5A, DC 15V/2A USB-C/USB-C cable Output: DC 5V/3A, DC 9V/3A, DC 12V/2.5A, DC 15V/2.67A, DC 10V/2.25A(SCP), PPS 5-11V/5A(45W Max) Wireless charging Output: 5W/7.5W/15W USB-C+ USB-C cable Output: DC 5V/3A Total Output: DC 5V/3A Battery: DC 7.2V 2.2 Support Equipment No. Device Type Brand Model Series No. Note E-1 Power Bank baseus PPNMS-1030SC N/A EUT E-2 ADAPTER Hoco. N18 N/A Auxiliary E-3 Dummy load N/A DL01 N/A Auxiliary Notes: 1. All the equipment/cables were placed in the worst-case configuration to maximize the emission during the test. 2. Grounding was established in accordance with the manufacturer’s requirements and conditions for the intended use. Report No.: BCTC2407591621-2E No.：BCTC/RF-EMC-005 Page 6 of 18 Edition：B.2 2.3 Test Mode AC Mode Mode 1 Charging DC Mode Mode 2 Full Load(15W, 360kHz) Mode 3 Half Load(7.5W, 115-205kHz) Mode 4 Null Load Note: 1. All test mode were tested and passed, only shows the worst case mode which were recorded in this report. 2. When the EUT is in Charging mode, the wireless charging function is cannot work. Report No.: BCTC2407591621-2E No.：BCTC/RF-EMC-005 Page 7 of 18 Edition：B.2 3. Test Facility And Test Instrument Used 3.1 Test Facility All measurement facilities used to collect the measurement data are located at Shenzhen BCTC Testing Co., Ltd. Address:1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China. The site and apparatus are constructed in conformance with the requirements of ANSI C63.4 and CISPR 16-1-1 other equivalent standards. FCC Test Firm Registration Number: 712850 A2LA certificate registration number is: CN1212 ISED …

Text truncated - open the document above for the full version.

规格承认书 Specification for Approval 供应商确认 Supplier Approve 客户确认 Customer Approve 研发确认 EE Confirm by 工程确认 PE Confirm by 品质确认 QE Confirm by 批准 Approval by 客户： Customer： 客户料号： Customer Part No.： TBS1MPPMGCL 供应商： Supplier： 伏达半导体（合肥）有限公司 规格描述： Spec description： 供应商料号： Supplier Part No.： J-FDTBS1 日期： Date： 2024/7/19 版本： Version： A.1 制作： Draw： 版本变更履历 Version Change History 版本记录 Revision 变更前 Before change 变更后 After change 变更日期 Date 批准 Approval by A.0 —— 新发行（Initial Release） 2024/7/19 A.1 E:40±2 E:39±1.5 2024/7/29 1. 生产商信息 Manufacturer information 项目 Items 生产商名称 Manufacturer name 生产商确认 Approval 第一资源 The first resource 东莞市吉欧电子科技有限公司 Dongguan Jiou Electronic Technology 罗杰 第二资源 The second resource 2. 尺寸规格 Dimension specification 单位(Unit):毫米(mm) A B C D E F G 42.9±0.5 20 +0.25 -1.2 39±1 20.4±0.1 39±1.5 4±1 1.0±0.1 H I 0.95±0.1 2.2±0.1 注： 1.线圈引线处不贴高温胶带 2.“I”尺寸包含双面胶的厚度但不含离型纸的厚度 3.隔磁片采用平面隔磁片由大小两个磁片贴双面胶粘在一起 3. 原理图 Schematic diagram 4. 电器特性 Electronic character 温度 TEMPERATURE:25±10°C,湿度RELATIVE HUMIDITY :65±20% 额定功率：15W 额定电流：1.66A 温度限制：130°C 项目 TIEM 标准 SPECIFICATION 测试条件 TEST FREQUENCY 测试仪器 TEST EQUIPMENTS IND 8.1UH±5% 100 KHZ/1.0V LCRMETRTH2830N DCR 60mΩ MAX \ PH2511S Q 80 MIN 100 KHZ/1.0V LCRMETRTH2830N Operating Temperature and Humindity/工 作温度和湿度 -30°C~80°C / 30%~90% Storage Temperature and Humindity/存储 温度和湿度 -40°C~90°C / 30%~90% 5. 线圈参数 Coil specification 圈数 Turns 线径 Wire Dia. 绕线方式疏/密 Wdg. Type Spred/Close 绕线方向 Wdg.Direction 相交是/否 Intersect Yes/Not 线圈正/反贴 Coil Positive/Anti Paste 11T S 0.08*80P 热风绞线 （Silk-Covered Wire） 密绕 （Close） 逆时针 (Anticlockwise) 相交 （Yes） 反贴 (Anti/-Paste) 6. 材料清单 Bill of materials 序号 number 材料名称 Material name 品名描述 Description 物料代码 Material Code 1 线材 0.08*80P 热风绞线 2 硬磁片(小） Φ20*1.0H 3 硬磁片（大） Φ42.9*1.0H(带槽) 4 粘和剂 JS-E103（加稠）白胶 5 双面胶（棉纸基材） Φ40.5 T=0.08/Φ18 T=0.08

No.：BCTC/RF-EMC-005 Page 1 of 29 Edition：B.2 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2407591621-1E Applicant: Shenzhen Baseus Technology Co., Ltd. Product Name: Power Bank Test Model: PPNMS-1030SC Tested Date: 2024-07-18 to 2024-07-23 Issued Date: 2024-07-29 Report No.: BCTC2407591621-1E No.：BCTC/RF-EMC-005 Page 2 of 29 Edition：B.2 FCC ID: 2A482-PPNMS1030SC The test report is effective only with both signature and specialized stamp.This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full.The tested sample(s) and the sample information are provided by the client. Product Name: Power Bank Trademark: baseus Model/Type Reference: PPNMS-1030SC Prepared For: Shenzhen Baseus Technology Co., Ltd. Address: 2 nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China Manufacturer: Shenzhen Baseus Technology Co., Ltd. Address: 2 nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen, China Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China. Sample Received Date: 2024-07-18 Sample Tested Date: 2024-07-18 to 2024-07-23 Issue Date: 2024-07-29 Report No.: BCTC2407591621-1E Test Standards: FCC Part15.209 ANSI C63.10-2013 Test Results: PASS Tested by: Approved by: Shanshan. Zhang / Project Handler Zero Zhou/Reviewer Report No.: BCTC2407591621-1E No.：BCTC/RF-EMC-005 Page 3 of 29 Edition：B.2 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 4 2. Test Summary ....................................................................................................... 5 3. Measurement Uncertainty ..................................................................................... 6 4. Product Information And Test Setup ..................................................................... 7 4.1 Product Information ............................................................................................... 7 4.2 Support Equipment ............................................................................................... 7 4.3 Test Setup Configuration ...................................................................................... 8 4.4 Test Mode ............................................................................................................. 9 5. Test Facility And Test Instrument Used ............................................................... 10 5.1 Test Facility ......................................................................................................... 10 5.2 Test Instrument Used .......................................................................................... 10 6. Conducted Emissions .......................................................................................... 12 6.1 Block Diagram Of Test Setup .............................................................................. 12 6.2 Limit .................................................................................................................... 12 6.3 Test procedure .................................................................................................... 12 6.4 EUT operating Conditions ................................................................................... 12 6.5 Test Result .......................................................................................................... 13 7. Radiated Emissions ............................................................................................. 15 7.1 Block Diagram Of Test Setup .............................................................................. 15 7.2 Limit .................................................................................................................... 16 7.3 Test procedure .................................................................................................... 16 7.4 Test Result .......................................................................................................... 17 8. Bandwidth Test .................................................................................................... 23 8.1 Test Procedure ................................................................................................... 23 8.2 Test Setup ........................................................................................................... 23 8.3 Test Result .......................................................................................................... 24 9. Antenna Requirements ........................................................................................ 25 9.1 Limit .................................................................................................................... 25 9.2 Test Result .......................................................................................................... 25 10. EUT Photographs ................................................................................................ 26 11. EUT Test Setup Photographs.............................................................................. 27 (Note: N/A Means Not Applicable) Report No.: BCTC2407591621-1E No.：BCTC/RF-EMC-005 Page 4 of 29 Edition：B.2 1. Version Report No. Issue Date Description Approved BCTC2407591621-1E 2024-07-29 Original Valid Report No.: BCTC2407591621-1E No.：BCTC/RF-EMC-005 Page 5 of 29 Edition：B.2 2. Test Summary The Product has been tested according to the following specifications: No. Test Parameter Clause No. Results 1 Conducted Emission 15.207 PASS 2 Radiated Emission …

Text truncated - open the document above for the full version.

Conducted emissions Radiated Measurement Photos 9kHz-30MHz 30MHz-1GHz