2A4A7-PN-CF02Automatic Pet Feeder

User Manual List of accessories 1*Smart pet feeder1*Power cord 1*User manual 1*Desiccant 1*Stainless steel bowl and plastic bowl Product introduction 1. Grain Hopper Lid 2. Lid Latch 6. Main Unit 4. Grain Storage Bucket 3. Food Divider 9. Plastic Food Bowl 10. Child Lock Indicator Operation Indicator 11. Wi-Fi Indicator 12. Feeding Indicator 13. Battery Indicator Light 14. Right Feeding Button 16. Left Feeding Button 15. Child Lock Button 8. Stainless Steel Food Bowl 7. Food Dispensing Outlet 5. Hopper Push-Button Lock 1 2 4 3 5 6 7 8 9 10111213141516 Product Accessories Product assembly 1. Remove the feeder and all accessories. Indicator Light 2. Insert the charging cable into the bottom of the device as shown in the figure. If battery power is required, install 4 AA batteries as shown in the figure. Note: Battery power is only for emergency use during power outages.It is recommended to connect to a power source and WiFi to set feeding schedules. Wi-Fi Indicator White light blinking White light steady on Red light blinking White light steady on White light blinking Flashing white light Flashing green light Small portion dispensing Large Portion Dispensing (Right Feeder) White light steady on White light off Waiting for network connection or offline mode Network connected successfully Locked State Unlocked State Full Charge Battery critically low Low battery Indicator Light ActionMeaning Feeding Indicator Child Lock Indicator Battery Indicator Light 4. Simply place the food mixing tray in its corresponding position on the main unit. 7. Place the pet food container lid on the container to complete the assembly. 5. Place the pet food container on the main unit of the feeder as shown in the figure. 3. Assemble the food bowl and place it in the corresponding position under the food dispensing outlet. 6. Insert the food dividing partition into the corresponding position in the middle of the pet food container as shown in the figure. How to set up a pet feeder Preparation Download the app and log in The feeder is compatible with iOS 9.0 or higher versions of iPhone and Android 4.4 or higher versions of smartphones. The feeder supports 2.4G and 5G Wi-Fi. Please place the feeder close to the WiFi router, with a distance of no more than 33 feet/10 meters between them, and there should be no wall barriers between them. Scan the OR code or search for "TUYA Smart，Smart,Life" on App Store or Google Play to download the app. Sign up or Login your account. Note: The language of the app depends on the default language of your phone. App StoreGoogle Play Tuya Smart Smart Life 6. Enter the main page, s lide and select the portion number of snacks or main dinning and clik "Manual" to start manual feeding. 1. Press the child lock button for 3 seconds to unlock. PPress and hold the L and R buttons simultaneously for 5 seconds. The device will then enter network configuration mode. 2. Ensure that the Bluetooth function of the phone is turned on, connect the phone to the WIFI network, and enable the phone's GPS positioning. On the top to right side, click the "+" sign to add a new feeder. 3. When the "PTM-10B1" appears, click on the corresponding icon to add it. Add device 5. After clicking the "Finish" and the connection is successful, The wifi indicator light which shown in the display screen is on. xxxxxxxx 4. When connecting to the network for the first time or switching to a new WiFi network,The system will prompt you to enter the WiFi password. Please Enter the password in the field and then click "Next". PTM-10B1 PTM-10B1 PTM-10B1 3S Add feeding plan 1. Click on "Feeding Plan" to enter the settings page. 2. Click the "Add" button to add a feeding plan. 3. Set the schedule & portion based on needs. Click "Save" to finish. Add feeding plan interface instructions 10:30 Feeding dates: every Tuesday, Wednesday, Thursday, Friday, Saturday 10:30 Feeding dates: every Sunday, Monday, Tuesday, Wednesday, Thursday, Friday, Saturday L Snack3 R Meal3 Plan 1 10:30 (Feeding dates: every Tuesday, Wednesday, Thursday, Friday, Saturday) L Snack2, R Meal2. Plan 2 10:30 Everydat/L Snack3，RMeal3. L Snack2 R Meal2 PTM-10B1 Feed record 1. Click "Feed Record".2. Enter 'Feeding history' page Press and hold the Child Lock Button for 3 seconds to unlock. Press the Left Feeding Button once to dispense one small portion of food. Press and hold the Child Lock Button and the Feeding Button simultaneously for 3 seconds until the feeding indicator flashes green to switch to large portion mode. Press the Right Feeding Button once to dispense one large portion of food. Turn the knob clockwise to the reset icon, press and hold it for 7 seconds to restore the factory settings. Note: When two beeps appear, it means the feeder restores the factory settings successfully. Manual feeding Reset Note: Only left granary has the large portion available, right granary is not available. PTM-10B1 Product maintenance instructions Product parameters Model Size Capacity Material Input Food Adapter Stainless steel Dry food with a diameter of less than 1.5CM Type C Power cord/Spare battery PTM-10B1 326X187X387mm 2L+3L 5. Do not immerse or rinse the main unit. Simply wipe it with a clean cloth. 1. Ensure the device is powered off before cleaning. 2. Press the buttons on both sides of the hopper lid to remove it, then pour out any remaining food. 3.Push the buttons on both sides of the main unit forward to remove the pet food container. 4. Clean the food hopper, stainless steel food bowl, food container lid, plastic food bowl, food divider, and food agitator plate. Then, air dry or wipe them dry. Usage precautions Fault and resolution Fault Solution Check whether the power cord is properly connected. The feeder doesn't work. Unplug the power cord and try using a new battery to see if it works. The screen doesn't respond. Press and hold the child lock button for 3 seconds to unlock. Check that the food hopper and food stirring plate remain dry. Check that the…

Text truncated - open the document above for the full version.

(Shenzhen Ipetmon Creative Technology Co., Ltd.) (2026.5.8) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID: 2A4A7-PN-CF02) [Shenzhen Ipetmon Creative Technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, the equipment does not utilize cyber-security or anti-virus software from Kaspersky Lab, Inc, or any of its successors and assignees, which is also on the “covered list”. Sincerely, (Applicant signature) (Applicant printed name) Deng Kaiqi (Shenzhen Ipetmon Creative Technology Co., Ltd.) (2026.05.08) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for (FCC ID: 2A4A7-PN-CF02) [Shenzhen Ipetmon Creative Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Deng Kaiqi

U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: SUN BEYOND CONSULTING LTD FRN: 0033598426 Contact Name: Wenchao Xiang Street Address: OFFICE NO.448, 4TH FLOOR, 90 CANAL STREET City/Province/Zip: BOSTON, MA 02114 Telephone No: (151) 287-9145 Email: [email protected] This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date:2026/05/06 Signed by (Printed Name/Title): Wenchao Xiang /Manager The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Shenzhen Ipetmon Creative Technology Co., Ltd. FRN: 0031856115 Grantee Code: 2A4A7 FCC ID: 2A4A7-PN-CF02 Contact Name: Deng Kaiqi Street Address: 101, No. 93 Boguang Second Road, Shangcun Community, Gongming Street, Guangming District, Shenzhen, China Telephone No: 15013737367 Email: [email protected] Applicant Signature: Date: 2026-05-06 Signed by (Printed Name/Title):

Shenzhen Ipetmon Creative Technology Co., Ltd. 2026.5.8 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: Automatic Pet Feeder MODEL : PTM-10B1 FCC ID : 2A4A7-PN-CF02 To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - Block Diagram - Schematics - Operational Description - FCC Software Security Requirements for UNII devices Rev 2.1 required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); User Manual Test Setup Photos For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. Please contact me if there is any information you may need. Sincerely, Client’s signature: Client’s name / title : Deng Kaiqi / Manager Contact information / address: 101, No. 93 Boguang Second Road, Shangcun Community, Gongming Street, Guangming District, Shenzhen, China

Shenzhen Ipetmon Creative Technology Co., Ltd. 2026.05.08 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize SHENZHEN STS TEST SERVICES CO., LTD to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature: Client’s name / title : Deng Kaiqi / Manager Contact information / address: 101, No. 93 Boguang Second Road, Shangcun Community, Gongming Street, Guangming District, Shenzhen, China

Shenzhen Ipetmon Creative Technology Co., Ltd. Model Difference 2026.5.8 EUT NAME: Automatic Pet Feeder MODEL : PTM-10B1 FCC ID : 2A4A7-PN-CF02 All the model are the same circuit and RF module, except model names. Sincerely Client’s signature Client’s signature: Client’s name / title : Deng Kaiqi / Manager Contact information / address: 101, No. 93 Boguang Second Road, Shangcun Community, Gongming Street, Guangming District, Shenzhen, China

External Photos

The labels are attached by means of printing. Size:40*20mm Automatic Pet Feeder FCC ID: 2A4A7-PN-CF02 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Label location

Internal Photos Antenna

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the ShenZhen STS Test Services Co., Ltd. MPE Report Report No.:STS2604330H01 Issued for Shenzhen Ipetmon Creative Technology Co., Ltd. 101, No. 93 Boguang Second Road, Shangcun Community, Gongming Street, Guangming District, Shenzhen, China Product Name: Automatic Pet Feeder Brand Name: Ipetmon Model Name: PTM-10B1 Series Model(s): PN-CF02 FCC ID: 2A4A7-PN-CF02 Test Standard: FCC 47CFR §2.1091 Page 2 of 8 Report No.: STS2604330H01 TEST REPORT Applicant’s Name ................. : Shenzhen Ipetmon Creative Technology Co., Ltd. Address ................................. : 101, No. 93 Boguang Second Road, Shangcun Community, Gongming Street, Guangming District, Shenzhen, China Manufacturer's Name ........... : Shenzhen Ipetmon Creative Technology Co., Ltd. Address ................................. : 101, No. 93 Boguang Second Road, Shangcun Community, Gongming Street, Guangming District, Shenzhen, China Product Description Product Name ........................ : Automatic Pet Feeder Brand Name .......................... : Ipetmon Model Name .......................... : PTM-10B1 Series Model(s) ...................... : PN-CF02 Test Standards ..................... : FCC 47CFR §2.1091 447498 D01 Interim General RF Exposure Guidance v06 The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the ShenZhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ...................... : 1 Apr. 2026 Date (s) of performance of tests ............. : 1 Apr. 2026 ~ 10 Apr. 2026 Date of Issue .......................................... : 10 Apr. 2026 Test Result .............................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 8 Report No.: STS2604330H01 TABLE OF CONTENTS 1. GENERAL INFORMATION 5 1.1 GENERAL DESCRIPTION OF THE EUT 5 1.2 TEST FACTORY 6 2. FCC 47CFR §2.1091 REQUIREMENT 7 2.1 TEST STANDARDS 7 2.2 LIMIT 7 2.3 TEST RESULT 8 Page 4 of 8 Report No.: STS2604330H01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 10 Apr. 2026 STS2604330H01 ALL Initial Issue Page 5 of 8 Report No.: STS2604330H01 1. GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF THE EUT Product Name Automatic Pet Feeder Brand Name Ipetmon Model Name PTM-10B1 Series Model(s) PN-CF02 Model Difference All the model are the same circuit and RF module, except model names. Product Description The EUT is a Automatic Pet Feeder Operation Frequency: 2402~2480 MHz 802.11b/g/n 20: 2412~2462 MHz 802.11n40:2422~2452MHz Modulation Type: GFSK 802.11b(DSSS):CCK,DQPSK,DBPSK 802.11g(OFDM):BPSK,QPSK,16-QAM,64-Q AM 802.11n(OFDM):BPSK,QPSK,16-QAM,64-Q AM 802.11b/g Support SISO 802.11n Support SISO IEEE 802.11a/ n(HT20): 5.180GHz-5.240GHz IEEE 802.11n(HT40): 5.190GHz-5.230GHz IEEE 802.11a/ n(HT20): 5.745GHz-5.825GHz IEEE 802.11n(HT40):5.755GHz-5.795GHz 802.11a(OFDM): BPSK,QPSK,16-QAM,64-QAM 802.11n(OFDM): BPSK,QPSK,16-QAM,64-QAM 802.11a Support SISO 802.11n Support SISO Antenna gain: Bluetooth/WLAN 2.4 GHz: 1.95 dBi WLAN 5 GHz: 2.64 dBi Antenna Designation: Internal Antenna Power Rating DC 5V from adapter Adapter Model:YMK-10W050100 Input:100-240V AC 50/60Hz 0.3A Max Output:5V DC 1000mA Battery N/A Hardware Version N/A Software Version N/A Page 6 of 8 Report No.: STS2604330H01 1.2 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 Page 7 of 8 Report No.: STS2604330H01 2. FCC 47CFR §2.1091 REQUIREMENT 2.1 TEST STANDARDS The limit for Maximum Permissible Exposure (MPE) specified in FCC 1.1310 is followed. The gain of the antennas used in the product is extracted from the Antenna data sheets provided and also the maximum total power input to the antenna is measured. Through the Friis transmission formula and the maximum gain of the antenna, we can calculate the distance, away from the product, where the limit of MPE is reached. Although the Friis Transmission formula is far field assumption, the calculated result of that is an over-prediction for near field power density. It is taken as worst case to specify the safety range. 2.2 LIMIT According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environmental impact of the human exposure to radio-frequency (RF) radiation as specified in 1.1307 (b) Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm²) Limits for Occupational / controlled Exposures 300 - 1500 -- -- F/300 3.0-30 1842/f 4.89/f *(900/f²) 1500 – 100000 -- -- 5.0 Limits for General population / Uncontrolled Exposure 300 - 1500 -- -- F/1500 1.34-30 824/f 2.19/f *(180f²) 1500 – 100000 -- -- 1.0 F= Frequency in MHz Friss Formula Friss Transmission Formula: Pd = (Pout * G) / (4*pi*r²) Where Pd = power density in mW/cm² Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = Distance between observation point and the center of radiator in cm If we know the maximum gain of the antenna and the total output power to the antenna, through calculation, we will know MPE value at distance 20cm. Page 8 of 8 Report No.: STS2604330H01 2.3 TEST RESULT Tune up Mode Detector Tune up Power BLE Peak 2±1dBm 2.4G WIFI Peak 13±1dBm 5G WIFI AV 13±1dBm Multiple transmission: BLE+5G WIFI=0.0006+0.0092=0.0098＜1 Note: 1. The Maxinum power is less than the limit, complies with the exemption requirements. 2. The Bluetooth and W…

Text truncated - open the document above for the full version.

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.:STS2604330W01 Issued for Shenzhen Ipetmon Creative Technology Co., Ltd. 101, No. 93 Boguang Second Road, Shangcun Community, Gongming Street, Guangming District, Shenzhen, China Product Name: Automatic Pet Feeder Brand Name: Ipetmon Model Name: PTM-10B1 Series Model(s): PN-CF02 FCC ID: 2A4A7-PN-CF02 Test Standards: FCC Part15.247 Page 2 of 65 Report No.: STS2604330W01 TEST REPORT Applicant’s Name ................. : Shenzhen Ipetmon Creative Technology Co., Ltd. Address ................................. : 101, No. 93 Boguang Second Road, Shangcun Community, Gongming Street, Guangming District, Shenzhen, China Manufacturer's Name .......... : Shenzhen Ipetmon Creative Technology Co., Ltd. Address ................................. : 101, No. 93 Boguang Second Road, Shangcun Community, Gongming Street, Guangming District, Shenzhen, China Product Description Product Name ....................... : Automatic Pet Feeder Brand Name .......................... : Ipetmon Model Name .......................... : ... : PTM-10B1 Series Model(s) .................... : PN-CF02 Test Standards ..................... : FCC Part15.247 Test Procedure ...................... : ANSI C63.10-2020 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the IC requirements. And it is applicable only to the tested sample identified in the report. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ........................................... : Date of receipt of test item ..................... : 1 Apr. 2026 Date (s) of performance of tests ............. : 1 Apr. 2026 ~ 10 Apr. 2026 Date of Issue .......................................... : 10 Apr. 2026 Test Result.............................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 65 Report No.: STS2604330W01 Table of Contents Page 1. SUMMARY OF TEST RESULTS 6 1.1 TEST FACTORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.1 GENERAL DESCRIPTION OF THE EUT 8 2.2 DESCRIPTION OF THE TEST MODES 9 2.3 TEST SOFTWARE AND POWER LEVEL 10 2.4 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 10 2.5 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 11 2.6 EQUIPMENTS LIST 12 3. EMC EMISSION TEST 13 3.1 CONDUCTED EMISSION MEASUREMENT 13 3.2 TEST PROCEDURE 14 3.3 TEST SETUP 14 3.4 EUT OPERATING CONDITIONS 14 3.5 TEST RESULTS 15 4. RADIATED EMISSION MEASUREMENT 17 4.1 RADIATED EMISSION LIMITS 17 4.2 TEST PROCEDURE 19 4.3 TEST SETUP 20 4.4 EUT OPERATING CONDITIONS 20 4.5 FIELD STRENGTH CALCULATION 21 4.6 TEST RESULTS 21 5. CONDUCTED SPURIOUS & BAND EDGE EMISSION 32 5.1 LIMIT 32 5.2 TEST PROCEDURE 32 5.3 TEST SETUP 32 5.4 EUT OPERATION CONDITIONS 32 5.5 TEST RESULTS 32 6. POWER SPECTRAL DENSITY TEST 33 6.1 LIMIT 33 6.2 TEST PROCEDURE 33 6.3 TEST SETUP 33 Page 4 of 65 Report No.: STS2604330W01 Table of Contents Page 6.4 EUT OPERATION CONDITIONS 33 6.5 TEST RESULTS 33 7. BANDWIDTH TEST 34 7.1 LIMIT 34 7.2 TEST PROCEDURE 34 7.3 TEST SETUP 34 7.4 EUT OPERATION CONDITIONS 34 7.5 TEST RESULTS 34 8. PEAK OUTPUT POWER TEST 35 8.1 LIMIT 35 8.2 TEST PROCEDURE 35 8.3 TEST SETUP 35 8.4 EUT OPERATION CONDITIONS 35 8.5 TEST RESULTS 35 9. ANTENNA REQUIREMENT 36 9.1 STANDARD REQUIREMENT 36 9.2 EUT ANTENNA 36 APPENDIX 1-TEST DATA 37 APPENDIX 2- EUT TEST PHOTO 65 Page 5 of 65 Report No.: STS2604330W01 Revision History Rev. Issue Date Report No. Effect Page Contents 00 10 Apr. 2026 STS2604330W01 ALL Initial Issue Page 6 of 65 Report No.: STS2604330W01 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: KDB 558074 D01 15.247 Meas Guidance v05r02. FCC Part 15.247,Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS -- 15.247 (a)(2) 6dB Bandwidth PASS -- 15.247 (b)(3) Output Power PASS -- 15.209 Radiated Spurious Emission PASS -- 15.247 (d) Conducted Spurious & Band Edge Emission PASS -- 15.247 (e) Power Spectral Density PASS -- 15.205 Restricted bands of operation PASS -- Part 15.247(d)/ Part 15.209(a) Band Edge Emission PASS -- 15.203 Antenna Requirement PASS -- Note: (1) ‘N/A’ denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2020. Page 7 of 65 Report No.: STS2604330W01 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 RF output power, conducted ±0.751dB 2 Unwanted Emissions, conducted ±2.888dB 3 All emissions, radiated 9K-30MHz ±2.48dB 4 All emissions, radiated 30M-1GHz ±2.52dB 5 All emissions, radiated 1G-18GHz ±3.48dB 6 All emissions, radiated>18GHz ±4.18dB 7 Conducted Emission (9KHz-150KHz) ±2.48dB 8 Conducted Emission (150KHz-30MHz) ±2.52dB 9 Occupied Channel Bandwidth ±3.6% 10 Power Spectral Density, conducted ±1.214dB 11 Duty Cycle ±3.2% Page 8 of 65 Report No.: STS2604330W01 2. GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF THE EUT Product Name Automatic Pet Feeder Brand Name Ipetmon Model Name PTM-10B1 Series Model(s) PN-CF02 Model Difference All the model are the same circuit and RF module, except model …

Text truncated - open the document above for the full version.

Shenzhen South Star Technology Co. Ltd. Shanghai South Star Technology Co. Ltd. SPECIFICATION FOR APPROVAL CUSTOMER : PART NAME : PART NO. : NDX NO. : REV. : Shenzhen southstar technology.co.,LTD 深圳市南斗星科技有限公司 Address：No.1606,Build C6,HengFeng industrial city,xixiang street,baoan district,Shenzhen Shenzhen southstar technology co., LTD. Shanghai branch 深圳市南斗星科技有限公司上海分公司 103B, Build10, No.198 Zhang Heng Road , Pudong New Area,Shanghai WBR3D PCB Antenna 2.4G- 5.8G TUYA Antenna Assembly Specification(With housing) 1.Electrical Properties 1.3 VSWR ................................................................ ...<2 1.4 Radiation................................................................Omni 1.5 Gain(Peak).............................................................1dBi 1.6 Polarization............................................................Linear 1.7 Admitted Power.....................................................1W 1.8 Connector...............................................................MH 1.1 Frequecy range.............................................2.412~2.472GHz 1.2 Impedance.......................................................50Ω Norminal F 2.Physical Properties 2.1 Working Temperature.........................................-20°C~+65°C 2.2 Storage Temperature...........................................-30°C~+75°C Shenzhen South Star Technology Co. Ltd. 103B, Build10, No.198 Zhang Heng Road , Pudong New Area,Shanghai Antenna Design for 2.4G-5.8G Document NumberNDX-1908020 Released Date20/08/2019 AuthorMingchao Zhang Review ByZhongyi Zhao Shenzhen South Star Technology Co. Ltd. 103B, Build10, No.198 Zhang Heng Road , Pudong New Area,Shanghai Revised History DateVersionRevised Recored 20/08/20191.00 1st Released Shenzhen South Star Technology Co. Ltd. 103B, Build10, No.198 Zhang Heng Road , Pudong New Area,Shanghai 1.Antennas' setup and enviroment With housing 板载2.4G-5.8G Shenzhen South Star Technology Co. Ltd. 103B, Build10, No.198 Zhang Heng Road , Pudong New Area,Shanghai 2.Analyzer Measurement 2.1 Ant 2.4G -5.8G S11 VSWR Shenzhen South Star Technology Co. Ltd. 103B, Build10, No.198 Zhang Heng Road , Pudong New Area,Shanghai 3.Gain & Patterns test results 3.1 Measurement setting-XYZ Shenzhen South Star Technology Co. Ltd. 103B, Build10, No.198 Zhang Heng Road , Pudong New Area,Shanghai 3.2 Ant 2.4G 3D Patterns Shenzhen South Star Technology Co. Ltd. 103B, Build10, No.198 Zhang Heng Road , Pudong New Area,Shanghai 3.2 Ant 5.8G 3D Patterns Shenzhen South Star Technology Co. Ltd. 103B, Build10, No.198 Zhang Heng Road , Pudong New Area,Shanghai 3.2 Ant 2.4G 2D Patterns Shenzhen South Star Technology Co. Ltd. 103B, Build10, No.198 Zhang Heng Road , Pudong New Area,Shanghai 3.2 Ant 5.8G 2D Patterns Shenzhen South Star Technology Co. Ltd. 103B, Build10, No.198 Zhang Heng Road , Pudong New Area,Shanghai 4. Peak Gain & Efficiency FreqEffiEffiGain (MHz)(%)(dB)(dBi) 240021.72-6.630.47 241024.64-6.081.17 242027.86-5.551.95 243026.18-5.821.71 244024.58-6.091.5 245023.27-6.331.17 246024.25-6.151.22 247021.7-6.630.55 248019.44-7.11-0.22 249016.86-7.73-1.02 510032.86-4.831.22 520039.24-4.061.97 530032.14-4.931.08 540054.54-2.632.64 550033.93-4.691.6 560034.27-4.650.65 570030.77-5.12-0.76 580035.7-4.47-0.84

Page 1 of 2 FCC ID: 2A4A7-PTM-10B1 Conducted emissions 30MHz-1GHz Page 2 of 2 FCC ID: 2A4A7-PTM-10B1 Spurious emissions