2A4GATPM-CW-300-000Tire Pressure Monitor Continuous Antenna

1000 Brown Rd. Auburn Hills, MI 48326 248.754.1900 jrautomation.com Continuous Antenna User Manual - Canada Prelim 1 Page 1 of 11 Printed: 11/16/22 3:36 PM Continuous TPM Antenna User Manual Model Number: TPM-CW-300 Includes Variants: TPM-LA-300-000 & TPM-SA-300-000 1000 Brown Rd. Auburn Hills, MI 48326 248.754.1900 jrautomation.com Continuous Antenna User Manual - Canada Prelim 1 Page 2 of 11 Printed: 11/16/22 3:36 PM REVISIONS Revision Date Revised By: Description Prelim 12/28/21 Mark Compton Preliminary CONTENTS Continuous TPM Antenna User Manual .................................................................................................................... 1 REVISIONS ............................................................................................................................................................... 2 CONTENTS ............................................................................................................................................................... 2 GENERAL IFORMATION & CONSIDERATIONS ..................................................................................................... 3 RF EXPOSURE STATEMENT .................................................................................................................................. 3 SAFETY ..................................................................................................................................................................... 4 PERSONAL PROTECTIVE EQUIPMENT ................................................................................................................. 4 GROUNDING ............................................................................................................................................................. 5 ELECTRICAL WARNING SIGNS .............................................................................................................................. 5 TPM STEM OVERVIEW ............................................................................................................................................ 6 LF TRANSMISSION (125KHz) .................................................................................................................................. 7 RECEIVING UHF SIGNALS ...................................................................................................................................... 8 EXTERNAL CONNECTIONS & LED INDICATORS ................................................................................................. 9 ANTENNA MOUNTING ........................................................................................................................................... 10 APPENDIX A: PRODUCT DATA SHEET ............................................................................................................... 11 1000 Brown Rd. Auburn Hills, MI 48326 248.754.1900 jrautomation.com Continuous Antenna User Manual - Canada Prelim 1 Page 3 of 11 Printed: 11/16/22 3:36 PM GENERAL IFORMATION & CONSIDERATIONS This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement Additionally: 1. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. 2. JR Automation TPM products & related equipment must be integrated into the end users manufacturing system by JR Automation, or by a JR Automation recommended automation Systems Integrator. 3. JR Automation TPM products are meant for industrial manufacturing settings only. 4. JR Automation does not manufacture or provide TPM valve stems, only the equipment that is used to communicate to those stems during tire, wheel, & vehicle manufacturing. RF EXPOSURE STATEMENT The device shall be used in such a manner that the potential for human contact normal operation is minimized. This equipment complies with RSS-102 radiation exposure limits. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Le dispositif doit être utilisé de manière à minimiser le potentiel de fonctionnement normal par contact humain. Cet équipement est conforme aux limites d'exposition au rayonnement RSS-102. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps. Cet appareil et son (ses) antenne (s) ne doivent pas être co-localisés ou utilisés conjointement avec une autre antenne ou un autre émetteur 1000 Brown Rd. Auburn Hills, MI 48326 248.754.1900 jrautomation.com Continuous Antenna User Manual - Canada Prelim 1 Page 4 of 11 Printed: 11/16/22 3:36 PM SAFETY 1. Only personnel who are properly trained and have adequate knowledge and skill related to this product should undertake any troubleshooting and repair. 2. It must be assumed at all times that POWER is "ON" so all conditions must be treated as live. This practice develops a caution that may prevent an accident. Follow posted lockout procedures. 3. REMOVE LOAD from circuit or equipment before and after maintenance/troubleshooting. 4. Equipment—NOTE: Test equipment must be checked at regular intervals. 5. Capacitors MUST be given time to discharge, otherwise it should be done manually with CARE. 6. When tr…

Text truncated - open the document above for the full version.

1000 Brown Rd. Auburn Hills, MI 48326 248.754.1900 jrautomation.com Continuous Antenna User Manual - Prelim 6 Page 1 of 10 Printed: 11/16/22 3:37 PM Continuous TPM Antenna User Manual Model Number: TPM-CW-300-000 Includes Variants: TPM-LA-300-000 & TPM-SA-300-000 1000 Brown Rd. Auburn Hills, MI 48326 248.754.1900 jrautomation.com Continuous Antenna User Manual - Prelim 6 Page 2 of 10 Printed: 11/16/22 3:37 PM REVISIONS Revision Date Revised By: Description Prelim 12/28/21 Mark Compton Preliminary CONTENTS Continuous TPM Antenna User Manual .................................................................................................................... 1 REVISIONS ............................................................................................................................................................... 2 CONTENTS ............................................................................................................................................................... 2 GENERAL INFORMATION........................................................................................................................................ 3 SAFETY ..................................................................................................................................................................... 3 PERSONAL PROTECTIVE EQUIPMENT ................................................................................................................. 4 GROUNDING ............................................................................................................................................................. 4 ELECTRICAL WARNING SIGNS .............................................................................................................................. 4 TPM STEM OVERVIEW ............................................................................................................................................ 5 LF TRANSMISSION (125KHz) .................................................................................................................................. 6 RECEIVING UHF SIGNALS ...................................................................................................................................... 7 EXTERNAL CONNECTIONS & LED INDICATORS ................................................................................................. 8 ANTENNA MOUNTING ............................................................................................................................................. 9 APPENDIX A: PRODUCT DATA SHEET ............................................................................................................... 10 1000 Brown Rd. Auburn Hills, MI 48326 248.754.1900 jrautomation.com Continuous Antenna User Manual - Prelim 6 Page 3 of 10 Printed: 11/16/22 3:37 PM GENERAL INFORMATION 1. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 2. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. 3. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. 4. JR Automation TPM products & related equipment must be integrated into the end users manufacturing system by JR Automation, or by a JR Automation recommended automation Systems Integrator 5. JR Automation TPM products are meant for industrial manufacturing settings only. 6. JR Automation does not manufacture or provide TPM valve stems, only the equipment that is used to communicate to those stems during tire, wheel, & vehicle manufacturing. SAFETY 1. The device shall be used in such a manner that the potential for human contact normal operation is minimized. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 30cm between the radiator and your body. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. 2. Only personnel who are properly trained and have adequate knowledge and skill related to this product should undertake any troubleshooting and repair. 3. It must be assumed at all times that POWER is "ON" so all conditions must be treated as live. This practice develops a caution that may prevent an accident. Follow posted lockout procedures. 4. REMOVE LOAD from circuit or equipment before and after maintenance/troubleshooting. 5. Equipment—NOTE: Test equipment must be checked at regular intervals. 6. Capacitors MUST be given time to discharge, otherwise it should be done manually with CARE. 7. When troubleshooting "LIVE" equipment, the necessary precautions must be taken as follows: a. Follow written safe operating practices. b. MAKE CERTAIN your tools and body are clear of Ground. c. Use extra PRECAUTION in DAMP areas. d. BE ALERT and work without any outside distraction. 8. BEFORE applying POWER to any equipment, it must be established without a DOUBT that all persons are CLEAR. 9. Any CONTROL PANEL DOORS shall be open ONLY when it is necessary to check out the electrical equipment or wirin…

Text truncated - open the document above for the full version.

MODEL:TPM-HH-700-000 FCC ID:2A4GATPM-HH-700-000 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. MODEL:TPM-MD-300-000 FCC ID:2A4GATPM-MD-300-000 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. MODEL:TPM-CW-300-000 FCC ID:2A4GATPM-CW-300-000 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Engineering Test Report No. 2103900-01 Report Date February 22, 2022 Manufacturer Name JR Automation Manufacturer Address 1000 Brown Rd Auburn Hills, MI 48326 Product Name Brand/Model No. TPM Activators: TPM-SA-300-000 TPM-LA-300-000 TPM-LA-200-000 TPM-SA-200-000 Date Received December 28, 2021 Test Dates December 28, 2021 - January 19, 2022 Specifications FCC "Code of Federal Regulations" Title 47 Part 15, Subpart B and C Innovation, Science, and Economic Development Canada, ICES-003 and RSS-GEN Test Facility Elite Electronic Engineering, Inc. 1516 Centre Circle, Downers Grove, IL 60515 FCC Reg. Number: 269750 IC Reg. Number: 2987A CAB Identifier: US0107 Signature Tested by Nathaniel Bouchie Signature Approved by Raymond J. Klouda, Registered Professional Engineer of Illinois – 44894 PO Number 423749-0510 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. This report shall not be reproduced, except in full, without the written approval of Elite Electronic Engineering Inc. Elite Electronic Engineering Incorporated certifies that the information contained in this report was obtained under conditions which meet or exceed those specified in the FCC "Code of Federal Regulations" Title 47 Part 15, Subpart B and C and Innovation, Science, and Economic Development Canada, ICES-003 and RSS-GEN test specifications. The data presented in this test report pertains to the EUT on the test dates specified. Any electrical or mechanical modifications made to the EUT subsequent to the specified test date will serve to invalidate the data and void this certification. This report must not be used to claim product certification, approval, or endorsement by A2LA, NIST, or any agency of the Federal Government. Engineering Test Report No. 2103900-01 This report shall not be reproduced, except in full, without the written approval of Elite Electronic Engineering Inc. Page 2 of 92 Table of Contents 1. Report Revision History ............................................................................................................................ 3 2. Introduction ............................................................................................................................................... 4 3. Power Input ............................................................................................................................................... 5 4. Grounding ................................................................................................................................................. 5 5. Support Equipment ................................................................................................................................... 5 6. Interconnect Leads .................................................................................................................................... 5 7. Modifications Made to the EUT ................................................................................................................. 5 8. Modes of Operation ................................................................................................................................... 6 8.1. Tx On......................................................................................................................................................... 6 8.2. Tx Off, Rx Only .......................................................................................................................................... 6 9. Test Specifications .................................................................................................................................... 6 10. Test Plan ................................................................................................................................................... 6 11. Deviation, Additions to, or Exclusions from Test Specifications ............................................................... 6 12. Laboratory Conditions ............................................................................................................................... 7 13. Summary ................................................................................................................................................... 7 14. Sample Calculations ................................................................................................................................. 7 15. Statement of Conformity ........................................................................................................................... 7 16. Certification ............................................................................................................................................... 8 17. Photographs of EUT .................................................................................................................................. 9 18. Equipment List ................................…

Text truncated - open the document above for the full version.

1516 Centre Circle, Downers Grove IL 60515 ANTENNA EXHIBIT Manufacturer Name Esys Automation, LLC Manufacturer Address 1000 Brown Rd Auburn Hills, MI 48326 Model No. TPM-LA-300-00 & TPM-SA-300-000 TPM-LA-200-000 & TPM-SA-200-000 TPM-HH-700 Specifications FCC “Code of Federal Regulations” Title 47 Part 2.1033(b)(4), 15.203, 15.212, 15.217, 15.219, 15.255 and 15.256 KDB 353028 D01 v01 f01 Industry Canada RSS-GEN Test Facility Elite Electronic Engineering, Inc. 1516 Centre Circle, Downers Grove, IL 60515 FCC Reg. Number: 269750 IC Reg. Number: 2987A CAB Identifier: US0107 Requirement All part 15 applications will need to show how the antenna gain was derived either from a manufacturer data sheet or a measurement. Where the gain of the antenna is inherently accounted for as a result of the measurement, such as field strength measurements on a part 15.249 or 15.231 device, so the gain does not necessarily need to be verified. However, enough information regarding the construction of the antenna shall be provided. Such information maybe photographs, length of wire antenna etc. The antenna gain information shall be made public (not confidential). Any proprietary information such as construction maybe stripped from the gain information report and held confidential. The main antenna information we require is the maximum gain of the antenna for the band of operation. This information must be provided as a data sheet or a measurement report. All antennas are inductive loop antennas of various lengths. 1516 Centre Circle, Downers Grove IL 60515 Small Circle antenna 40 cm Diameter. Inductive loop TPM-LA-200-000 & TPM-SA-200-000 Oval Antenna 61 cm x 92 cm inductive loop TPM-LA-200-000 & TPM-SA-200-000 1516 Centre Circle, Downers Grove IL 60515 Rectangle Antenna 140 cm x 36 cm with three inductive loops TPM-LA-300-000 & TPM-SA-300-000 Handheld 4 cm x 8 cm inductive loop TPM-HH-700

Authors: Cullen Davison Warren Guthrie Isaiah Hendrick Date: Procedure: Equipment: 1 - Measure worst-case field on all sides of the DUT, except for the front side.Wavecontrol E/H Probe Model WP400-3 S/N 22WP120108 The front side is known to be the worst-case magnetic field, as the sides and back have shielding.WaveControl Field Meter SMP2 S/N 22SN1853 Apply duty cycle-averaging over appropriate time (30 minutes) to each side and back measurement. 2 - Mark out a grid(See picture) Mark out 2.5 inch grid squares Approximately 18 inches below product Up to 1.5 meters from bottom edge to top of grid 3 - Measure the H field at each grid position (30 cm from surface in order to fall within limit) 4 - RMS average the field Over a range of approximately 1 meter wide and 1.8 meters tall Sweep the range over the entire grid range (unil the range starts to leave the grid) Find worst-case spatially-averaged field measurement and apply step 4. 5 - Apply duty cycle averaging over appropriate time (30 minutes) Step 1 - Measure worst-case field on all other sides of the DUT. Product duty cycle: Right side (4 cm away from surface):Left side (4 cm away from surface):Bottom side (3 cm away from surface):Top side (at surface):Back side (at surface): Worst case magnetic field:Worst case magnetic field:Worst case magnetic field:Worst case magnetic field:Worst case magnetic field: μTμTμTμTμT Apply duty cycle averaging:Apply duty cycle averaging:Apply duty cycle averaging:Apply duty cycle averaging:Apply duty cycle averaging: μT →A/m μT →A/m μT →A/m μT →A/m μT →A/m Product Perimeter Step 3: Measure at each grid location (30 cm from surface)Step 2: Marked out grid Picture of the grid used, along with the DUT. 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.3 0.3 0.3 0.3 0.3 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.3 0.3 0.4 0.4 0.4 0.5 0.5 0.5 0.5 0.5 0.5 0.4 0.4 0.4 0.4 0.3 0.3 0.3 0.3 0.3 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.4 0.4 0.4 0.4 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.5 0.5 0.5 0.4 0.4 0.4 0.3 0.3 0.3 0.3 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.3 0.4 0.4 0.5 0.5 0.5 0.6 0.6 0.6 0.7 0.7 0.8 0.8 0.9 0.9 0.9 0.8 0.8 0.7 0.6 0.6 0.5 0.5 0.5 0.4 0.4 0.3 0.3 0.3 0.3 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.4 0.4 0.5 0.6 0.6 0.7 0.7 0.8 0.8 0.9 1 1 1 1.1 1.1 1.1 1.3 1.1 1 1 0.8 0.8 0.7 0.7 0.6 0.6 0.5 0.4 0.4 0.3 0.3 0.3 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.4 0.4 0.5 0.6 0.7 0.9 1 1.1 1.1 1.2 1.2 1.3 1.4 1.5 1.6 1.7 1.7 1.7 1.7 1.6 1.4 1.3 1.2 1.1 1 1 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.3 0.3 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.4 0.4 0.5 0.6 0.7 0.8 1.2 1.3 1.4 1.5 1.5 1.6 1.7 1.8 1.9 2.1 2.2 2.3 2.3 2.1 2 1.9 1.7 1.7 1.6 1.5 1.5 1.3 1.1 1 0.8 0.6 0.5 0.4 0.3 0.3 0.3 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.3 0.4 0.5 0.6 0.8 1 1.2 1.7 1.9 2.1 2.2 2.3 2.3 2.4 2.5 2.7 2.8 2.9 2.9 2.9 3 2.8 2.6 2.5 2.4 2.3 2.2 2 1.8 1.5 1.2 1 0.7 0.6 0.5 0.4 0.3 0.3 0.3 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.4 0.4 0.6 0.7 1 1.4 1.8 2 2.4 2.8 3.1 3.2 3.2 3.2 3.4 3.6 3.7 3.8 3.8 3.8 3.7 3.5 3.4 3.3 3.2 3.1 3.1 3 2.6 2.1 1.7 1.3 1 0.7 0.5 0.4 0.4 0.3 0.3 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.2 0.3 0.3 0.4 0.5 0.6 0.8 1.1 1.5 2 2.5 3.2 3.6 3.9 3.9 4 4.1 4.2 4.3 4.5 4.6 4.6 4.6 4.5 4.4 4.2 4.1 4.1 4.1 4 3.8 3…

Text truncated - open the document above for the full version.