2A4GZ-MHCB05PBBluetooth Device

Bluetooth Device （MHCB05P-B） Specification Rev 1.6 CMIIT ID（MHCB05P-B）：2019DP6424 Version update instructions Date Version Update contents 2019-05-06 1.0 Initial 2019-05-22 1.1 Modify product coding rules 2019-08-22 1.2 Modify the module pin diagram 2019-08-28 1.3 CMIIT ID added 2020-03-13 1.4 Modify the serial port ID and package size 2021-01-04 1.5 a.Modify pin definition diagram b.Electrostatic level description; c.Update time sequence requirements for power-on; d.Update the packaging content; e.Update module design considerations. 2021-11-03 1.6 The ram space has been fixed 2 / 13 3 / 13 Contents Version update instructions....................................................................................................................2 1 Product description........................................................................................................................4 1.2 Functional block diagram ....................................................................................................4 1.3 Product code .......................................................................................................................4 2 System hardware advantage ..........................................................................................................5 3 Pin description ...............................................................................................................................6 3.1 Pin layout.............................................................................................................................6 3.2 Pin definition .......................................................................................................................7 4 Electrical parameters .....................................................................................................................8 4.1 Absolute Maximum Ratings ................................................................................................8 4.2 BLE RF..................................................................................................................................9 4.2.1 Receiver....................................................................................................................9 4.2.2 Transmitter and emitter ...........................................................................................9 5 Reflow soldering temperature curve ...........................................................................................10 6 Electrostatic discharge voltage.....................................................................................................10 7 Mechanical Dimension.................................................................................................................11 8 MSL level / Storage conditions...................................................................................................12 9 Delivery Checklist........................................................................................................................12 1 Product description 1.1 Solution overview MHCB05P-B is a high-performance BLE wireless module based on Realtek XMB1R(RTL8762CMF) solution，built- in ARM Cortex-M4F Core，High transmitting power. MHCB05P-B are suitable for many application scenarios such as smart home and smart wearable. The module provides the highest integration in the industry, has significant system performance, low power consumption and low cost, etc. MHCB05P-B an integrated PCB on-board antenna. 1.2 Functional block diagram 1-1 Functional block diagram 1.3 Product code According to different customers, there will be different PN numbers, the rules are as follows: 4 / 13 Product Differentiation Code （X ） H MHCB05P-B model 06 on-board antenna 02 External antenna 2 System hardware advantage Features of MHCB05P-B ： Module size：13mm*23.5mm*3.4mm High -performance 32- bit 40 MHz ARM Cortex®-M4    512KB flash，160KB RAM Minimum receiving sensitivity： -97dBm 7.3mA current at RX 5 / 13 2.6uA current at DLSP (Wakeup by GPIO Timer) 450nA current at Power down （Wakeup by GPIO） 3 Pin description 3.1 Pin layout MHCB05P-B pin distribution of the Chip is shown in Figure 3-1 Figure 3-1 MHCB05P-B pin definition description 6 / 13 3-2 MHCB05P-B pin definition description 3.2 Pin definition MHCB05P-B have 35 pins, the pin definitions are as follows: No. Pin Function Description 1 GND GND 2 P2_7 GPIO 3 P2_6 GPIO 4 P2_5 GPIO 5 P2_4 GPIO 6 P2_3 GPIO 7 P2_2 GPIO 8 P5_0 GPIO 9 GND GND 10 32K_XO 32K_XO 11 32K_XI 32K_XI 12 P3_0 TX 13 P3_1 RX 14 VDD 3.3V 15 P3_2 GPIO 16 P3_3 GPIO 17 NC NC 18 P0_0 GPIO 19 P0_1 GPIO 7 / 13 20 P0_2 GPIO 21 P1_1 JTAG(SWDLCK) 22 P1_0 JTAG(SWDIO) 23 P0_3 LOG output 24 GND GND 25 VDD_IO 3.3V 26 GND GND 27 P0_4 GPIO 28 P0_5 GPIO 29 P0_6 GPIO 30 P4_0 JTAG(SWO) 31 P4_1 GPIO 32 P4_2 GPIO 33 P4_3 GPIO 34 RESET RESET 35 GND GND Instruction: suggest P0_3 is used as NC or pull-up, If the level is low immediately after the power-on, the chip enters bypass flash mode; PIN12，PIN13（UART0）Just used for Product Test，It is not recommended for use by users； If UART serial port communication is required, UART1 is recommended. Other GPIO can be used. For details, see the chip data manual. 4 Electrical parameters Note: Unless otherwise specified, test conditions are as follows: VDD=3.3V, temperature 25°C. 4.1 Absolute Maximum Ratings Figure 4-1 Absolute Maximum Ratings Parameter Symbol Min. Typ. Max. Unit. Power supply voltage VDD 1.8 3.3 3.6 V Storage temperature TST R -55- 125 °C Operating temperature range TOP R -40- 85 °C 8 / 13 4.2 BLE RF 4.2.1 Receiver 4.2.2 Transmitter and emitter 9 / 13 2 5 Reflow soldering temperature curve Figure 5-1 MHCB05P-B Reflow temperature curve Soldering instructions: In double-sided SMT, after the T-side (top side) components are reflowed for the first time, the circuit board needs to be flipped and reflow soldered on the other side. In the second reflow, the already solde…

Text truncated - open the document above for the full version.

Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd. ADD:BuildingA2,ShangjinwanHeadquartersEconomicParkNo.2288,WuzhongAvenue,Wuz hongEconomicDevelopmenZone, Suzhou Jiangsu, China TEL: +86 18761903492 FAX: N/A E-mail: [email protected] 2023/10/13 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for FCC ID: 2A4GZ-MHCB05PB [Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Wentao Shi) Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd. ADD:BuildingA2,ShangjinwanHeadquartersEconomicParkNo.2288,WuzhongAvenue,WuzhongEcon omicDevelopmenZone, Suzhou Jiangsu, China TEL: +86 18761903492 FAX: N/A E-mail: [email protected] 2023/10/10 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for FCC ID: 2A4GZ-MHCB05PB [Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Wentao Shi)

Attestation Statements 2023/08/29 TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for FCC ID: 2A4GZ-MHCB05PB (Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd. ), the undersigned, hereby authorize (FCC US Agent,LLC) to act as our designated U.S. agent for service of process, (Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd.) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. (FCC US Agent,LLC) accepts the responsibility to act as designated U.S. agent for service of process. Applicant Information： Company name: Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd. Contact Name: Wentao Shi Address:BuildingA2,ShangjinwanHeadquartersEconomicParkNo.2288,WuzhongAvenue ,Wuzhong EconomicDevelopmenZone, Suzhou Jiangsu, China Telephone No: +86 18761903492 Email: [email protected] Signature [name] U.S. Agent Information: Company Name: FCC US Agent,LLC Address: 3722 Illinois Avenue, Saint Charles,IL, 60174, USA FRN: 0033402884 Contact Name: Tim Payne Telephone No: 708-571-3148 Email: [email protected] Signature [name]

THIS MUST BE SIGNED BY THE APPLICANT/AGENT AND SHOULD BE PLACED ON APPROPRIATE LETTERHEAD Request for Modular/Limited Modular Approval Date: October 16, 2023 Subject: Manufacturer’s Declaration for ☒ - Modular Approval ☐- Split Modular Approval ☐- Limited Modular Approval ☐ - Limited Split Modular Approval Confidentiality Request for: ______ FCC ID: 2A4GZ-MHCB05PB ______ 8 Basic Requirements – FCC Part 15.212(a)(1) For Items Marked “NO(*)”, the Limited Module Description Must be Filled Out on the Following Pages Modular Approval Requirement Requirement Met 1.The modular transmitter must have its own RF shielding. This is intended to ensure that the module does not have to rely upon the shielding provided by the device into which it is installed in order for all modular transmitter emissions to comply with FCC limits. It is also intended to prevent coupling between the RF circuitry of the module and any wires or circuits in the device into which the module is installed. Such coupling may result in non-compliant operation. The physical crystal and tuning capacitors may be located external to the shielded radio elements. 15.212(a)(1)(i) ☒ - YES ☐ - NO(*) Details: <example – The module contains a metal shield which covers all RF components and circuitry. The shield is located on the top of the board next to antenna connector> 2.The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with FCC requirements under conditions of excessive data rates or over-modulation. 15.212(a)(1)(ii) ☒ - YES ☐ - NO(*) Details: <example – Data to the modulation circuit is buffered as described in the operational description provided with the application> 3.The modular transmitter must have its own power supply regulation on the module. This is intended to ensure that the module will comply with FCC requirements regardless of the design of the power supplying circuitry in the device into which the module is installed. 15.212(a)(1)(iii) ☒ - YES ☐ - NO(*) Details: <example – The module contains its own power supply regulation. Please refer to schematic filed with this application> 4.The modular transmitter must comply with the antenna and transmission system requirements of §§ 15.203, 15.204(b), 15.204(c), 15.212(a), and 2.929(b). The antenna must either be permanently attached or employ a ‘‘unique’’ antenna coupler (at all connections between the module and the antenna, including the cable). The ‘‘professional installation’’ provision of § 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph 15.212(b). 15.212(a)(1)(iv) ☒ - YES ☐ - NO(*) Details: <example – The module connects to its antenna using an UFL connector which is considered a non-standard connector. A list of antennas tested and approved with this device may be found in users manual provided with the application> 5.The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified or commercially available (see Section 15.31(i)). 15.212(a)(1)(v) ☒ - YES☐- NO(*) Details: <example – The module was tested stand-alone as shown in test setup photographs filed with this application> THIS MUST BE SIGNED BY THE APPLICANT/AGENT AND SHOULD BE PLACED ON APPROPRIATE LETTERHEAD Modular Approval Requirement Requirement Met 6. The modular transmitter must be labeled with its own FCC ID number, or use an electron display (see KDB Publication 784748). If using a permanently affixed label with its own FCC ID number, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. If the modular transmitter uses an electronic display of the FCC identification number, the information must be readily accessible and visible on the modular transmitter or on the device in which it is installed. If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains FCC certified transmitter module(s).” Any similar wording that expresses the same meaning may be used. The user manual must include instructions on how to access the electronic display. A copy of these instructions must be included in the application for equipment authorization. 15.212(a)(1)(vi) ☒ - YES ☐ - NO(*) Details: <example – There is a label on the module as shown in the labeling exhibit filed with this applicat…

Text truncated - open the document above for the full version.

Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd. ADD:BuildingA2,ShangjinwanHeadquartersEconomicParkNo.2288,WuzhongAvenue,WuzhongEcon omicDevelopmenZone, Suzhou Jiangsu, China TEL: +86 18761903492 FAX: N/A E-mail: [email protected] 2023/10/13 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (Bluetooth Device/MHCB05P-B/ FCC ID: 2A4GZ-MHCB05PB) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47.We have requested that the (Block Diagram, Schematics,Operation Description quired to be submitted with this application be permanently withheld from public review. SPECIFY REASON FOR REQUEST (i.e. the above documents are company proprietary information that could never get into the possession of your competition). Please contact me if there is any information you may need. Sincerely, Wentao Shi

Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd. ADD:BuildingA2,ShangjinwanHeadquartersEconomicParkNo.2288,WuzhongAvenue,W uzhongEconomicDevelopmenZone, Suzhou Jiangsu, China TEL: +86 18761903492 FAX: N/A E-mail: [email protected] 2023/10/13 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize China Certification ICT Co., Ltd (Dongguan) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Wentao Shi

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230844568-EXP Page 1 of 2 EUT EXTERNAL PHOTOGRAPHS China Certification ICT Co., Ltd (Dongguan) Report No.: CR230844568-EXP Page 2 of 2

FCCID:2A4GZ-MHCB05PB IC:28570-MHCB05PB HVIN:V1.0.0

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230844568-INP Page 1 of 2 EUT INTERNAL PHOTOGRAPHS Chip China Certification ICT Co., Ltd (Dongguan) Report No.: CR230844568-INP Page 2 of 2 Antenna

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230844568-00 Page 53 of 56 5. RF EXPOSURE EVALUATION 5.1 Applicable Standard FCC §15.247 (i) and subpart §1.1307 Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. 5. 2 Procedure According to §1.1307(b)(3)(i) (C) Or using Table 1 and the minimum separation distance (R in meters) from the body of a nearby person for the frequency (f in MHz) at which the source operates, the ERP (watts) is no more than the calculated value prescribed for that frequency. For the exemption in Table 1 to apply, R must be at least λ/2π, where λ is the free-space operating wavelength in meters. If the ERP of a single RF source is not easily obtained, then the available maximum time-averaged power may be used in lieu of ERP if the physical dimensions of the radiating structure(s) do not exceed the electrical length of λ/4 or if the antenna gain is less than that of a half-wave dipole (1.64 linear value). Table 1 to § 1.1307(b)(3)(i)(C) - Single RF Sources Subject to Routine Environmental Evaluation RF Source frequency (MHz) Threshold ERP (watts) 0.3-1.34 1,920 R 2 . 1.34-30 3,450 R 2 /f 2 . 30-300 3.83 R 2 . 300-1,500 0.0128 R 2 f. 1,500-100,000 19.2R 2 . 5.3 Measurement Result Radio Frequency (MHz) λ/2Π (mm) Distance (mm) Exemption ERP (mW) Maximum Conducted Power including Tune-up Tolerance (dBm) Antenna Gain (dBi) ERP MPE- Based Exemption dBm mW BLE 2402-2480 19.81 200 768 2 0.2 0.05 1.01 Compliant Note: The Maximum Conducted Power including Tune-up Tolerance was declared by manufacturer. Result: The device compliant the MPE-Based Exemption at 20cm distances.

ReportNo.:RFI-LAB-RF-202004-DD12 QP030-E11 Page1of10 TestingReport CustomerName:XiaomiCommunicationTechnologyCo.LTD ProductName:2.4GHzBLEModule SampleModel:MHCB05P-B ReferenceStandard:GB/T9410-2008;ANSI/IEEEStd149-1979 IssueDate:2020.04.22 Engineer:Date: Auditor:Date: Approver:Date: ReportNo.:RFI-LAB-RF-202004-DD12 QP030-E11 Page2of10 Version VersionNo.DateDescriptionFormulateApproval A02020.04.22Forthefirsttime,formulate Amanda Eason Contents 1.GeneralInformation.........................................................................................................................3 1.1Generalinformationoftestinginstitutions...........................................................................3 1.2Testingprinciple...................................................................................................................3 1.3Testequipment......................................................................................................................4 1.4Testenvironment...................................................................................................................4 1.5Statement..............................................................................................................................4 2.SampleInformation.........................................................................................................................5 2.1Clientinformation.................................................................................................................5 2.2DescriptionofEUT(S)..........................................................................................................5 2.3EUTappearance....................................................................................................................6 2.4DUTsetupphotooffreespaceOTAtesting........................................................................6 3.TestResults......................................................................................................................................7 3.1Teststandard.........................................................................................................................7 3.2Testuncertainty.....................................................................................................................7 3.3Testdata................................................................................................................................8 3.3.1S11parameters...........................................................................................................8 3.3.2VSWRdata................................................................................................................8 3.3.3Typicalfreespaceefficiencyandgain......................................................................8 3.3.4Typicalfreespaceradiationpattern...........................................................................9 （Thefollowingisblank）..............................................................................................................10 ReportNo.:RFI-LAB-RF-202004-DD12 QP030-E11 Page3of10 1.GeneralInformation 1.1Generalinformationoftestinginstitutions Name ShenzhenRFI-LABCommunicationTechnologyCo.,Ltd. Address 10/FA,LingyunBld,LiufangRd,BaoanDistrict,SZ Tel 13682621346 E-mail [email protected] Equipment Alltheequipmentusedinthereportisfixedin 10/FA,LingyunBld,LiufangRd,BaoanDistrict,SZ 1.2Testingprinciple ReportNo.:RFI-LAB-RF-202004-DD12 QP030-E11 Page4of10 1.3Testequipment EquipmentModelNo.SerialNo.Manufacturer Calibration date Next calibration date 16probe microwave chamber 3*3*2.5RFI-LAB-010Sunyield2019.03.152021.03.14 Network Analyzer E5071BRFI-LAB-012Agilent 2019.10.232020.10.22 Network Analyzer E5071CRFI-LAB-032Agilent2019.10.232020.10.22 1.4Testenvironment Temperature 25.5°C Humidity 62%RH Pressure 100.32kPa 1.5Statement (1)Thetestresultsinthereportareonlyapplicabletothetestedsamplesandthetestedsamples workundertheenvironmentdescribedinthereport. (2)OnlyShenzhenRFI-LABCommunicationTechnologyCo.,Ltd.havetherighttomodifythe report,andthemodificationinformationshallbeannotatedintherevisionform. (3)Anyobjectiontothisreportshallberaisedwithin30daysafterformalconfirmationofthe report. (4)Thisreportisinvalidifthereisanyevidencethatthesampleinformationprovidedisfalsified. (5)Thereportisinvalidwithoutthesignatureoftheauditorandapprover. ReportNo.:RFI-LAB-RF-202004-DD12 QP030-E11 Page5of10 2.SampleInformation 2.1Clientinformation Name XiaomiCommunicationTechnologyCo.LTD Address / Contacts ZhuHuafang Tel 18327086899 E-mail [email protected] 2.2DescriptionofEUT(S) ProductName 2.4GHzBLEModule SampleModel MHCB05P-B PN T900YH0601G34 MAC 50EC50E3C92F TestItem VSWR;Antennagain;Efficiency;Radiationpattern FrequencyRange 2400-2500MHz ReceivedDate 2020.04.07 TestDate 2020.04.21 Remark ThelengthoftheRFcableis50mm ReportNo.:RFI-LAB-RF-202004-DD12 QP030-E11 Page6of10 2.3EUTappearance 2.4DUTsetupphotooffreespaceOTAtesting Planform Frontview ReportNo.:RFI-LAB-RF-202004-DD12 QP030-E11 Page7of10 3.TestResults 3.1Teststandard NameParameterMethodStandardno. Mobile communication antenna Antennagain Genericspecification forantennasusedinthe mobilecommunications GB/T 9410-2008 Radiationpattern VSWR Antenna Radiationefficiency IEEEStandardTest ProceduresforAntennas ANSI/IEEEStd 149-1979 Gainanddirectivity 3.2Testuncertainty TheuncertaintywascalculatedonthebasisoftheGUMpublishedbyISO,usingthe inclusionfactorofK=2andthe95%confidenceleveltoexpresstheextended uncertainty. ItemUncertainty VSWR±0.3 Antennagain ± 1dB Radiationefficiency±10% ReportNo.:RFI-LAB-RF-202004-DD12 QP030-E11 Page8of10 3.3 Testdata 3.3.1S11parameters 3.3.2VSWRdata 3.3.3Typicalfreespaceefficiencyandgain Frequency/MHz 240024502500 VSWR 2.02031.05022.4967 Frequency/MHz 24002410242024302440245024602470248024902500 PeakGain/dBi -0.110.120.180.20.170.03-0.1-0.56-1.04-1.68-2.38 Efficiency/% 42.7544.5945.5346.2845.4144.7842.2238.6834.6431.1226.95 ReportN…

Text truncated - open the document above for the full version.

TEST REPORT Applicant: Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd. Address: Building A2, Shangjinwan Headquarters Economic Park, No.2288, Wuzhong Avenue, Wuzhong Economic Development Zone, Suzhou Jiangsu P.R. China FCC ID: 2A4GZ-MHCB05PB IC: 28570-MHCB05PB HVIN: V1.0.0 Product Name: Bluetooth Device Standard(s): 47 CFR Part 15, Subpart C(15.247) RSS-247 Issue 2, February 2017 RSS-Gen, Issue 5, February 2021 Amendment 2 ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 The above equipment has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR230844568-00 Date Of Issue: 2023/8/16 Reviewed By: Calvin Chen Title: RF Engineer Approved By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230844568-00 Page 2 of 56 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR230844568-00 Page 3 of 56 CONTENTS T EST FACILITY .......................................................................................................................................... 2 DECLARATIONS .......................................................................................................................................... 2 DOCUMENT REVISION HISTORY .......................................................................................... 5 1. GENERAL INFORMATION .................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 6 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 7 1.2.2 Support Equipment List and Details .............................................................................................................. 7 1.2.3 Support Cable List and Details ...................................................................................................................... 7 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 8 1.3 MEASUREMENT UNCERTAINTY .......................................................................................................... 9 2. SUMMARY OF TEST RESULTS .......................................................................................... 10 3. REQUIREMENTS AND TEST PROCEDURES .................................................................. 11 3.1 AC LINE CONDUCTED EMISSIONS .................................................................................................... 11 3.1.1 Applicable Standard ..................................................................................................................................... 11 3.1.2 EUT Setup.................................................................................................................................................... 13 3.1.3 EMI Test Receiver Setup ............................................................................................................................. 13 3.1.4 Test Procedure ............................................................................................................................................. 14 3.1.5 Corrected Amplitude & Margin Calculation ................................................................................................ 14 3.2 RADIATION SPURIOUS EMISSIONS…

Text truncated - open the document above for the full version.