2A4GZ-N303001CNAVEE Electric Scooter

· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · 3cm -10°C 4CM Beware of Fire · · · · · · Warning! 15 10. How to Ride Starting & Accelerating Steering Decelerating & Braking & Parking Before riding When the scooter starts to coast, put both feet on the deck and gently press the accelerator. Tips: This electric kick scooter is powered by an electric motor. For your riding safety,the motor will not start until the speed reaches 5 km/h. Tilt your body to the steering direction as you turn, and slowly turn the handlebar. To avoid others using the scooter without your permission, you can lock the scooter when it is parked. 1. Release the accelerator to slow down, and squeeze the brake lever for a sudden brake. 2. When the scooter slows down or stops, put one foot on the ground to get Before each ride, please check the status of your scooter, including tire performance, remaining battery level and scooter body state, and ensure that no part is loose or damaged. Before riding, please wear helmets, knee pads, elbow pads, and other protective gear at all times. PARKING WARNING • Do not park your kick scooter on a slope. • Make sure that the kickstand is positioned on a flat surface and the kick scooter is stable enough to stand alone before leaving it. V≥5km/h

16 11. Maintenance Cleaning Storage Battery tightly. Wipe the main chassis with a soft damp cloth, the hard-to-remove dirt can be scrubbed with a toothbrush. Afterwards, wipe all areas with a dry cloth. WARNING! · Do not wash the scooter with a high-pressure water spray. · Do not clean the scooter with corrosive cleaner, which will damage the external and internal structure of the scooter. WARNING! · Please do not leave the scooter under hot sun or severely humid place for extended periods of time. · Please do not place the scooter near flammable materials. · This product contains a built-in lithium battery and must be transported only when permitted by local laws and regulations. Always charge before exhausting the battery to prolong the battery's lifespan. When riding, storing or charging, do not exceed the specified temperature limit (refer to specifications). Failure to follow instructions for use, storage or charging may result in battery damage, failure to charge and void warranty. The fully charged scooter has an approximate standby time of 120-180 days. If it is not used for a long time, it should be charged every 30 days. Please pay attention to the standby time to prevent irreversible damage to the battery caused by not charging. WARNING! · Do not use battery packs of other models or brands, as there may be a safety risk. · Only use the original battery charger to avoid potential damage or fire. · If the battery is damaged or soaked with water, do not charge or continue to use it. of the scooter. 17 11. Maintenance Inflate the Tire Adjust the Mechanical Brake Check the tire pressure every month, and inflate the tires if the pressure is too low. The recommended tire pressure is 34-38 psi. 1 Remove the tire valve cap, and connect the pump and the valve securely together. 2. Inflate the tire. 3. Remove the pump and install the tire valve cap. WARNING! Tire removal is very complicated. Please do not remove the tire by yourself. Improper operation may 18 11. Maintenance Maintaining the scooter regularly can help keep the scooter neat and in good condition, avoid safety hazards, minimize breakdowns, slow down the deterioration of the scooter, and extend the scooter's service life. Item Service Object Actions Every month Every 3 months Every 500 km/ 6 months Every 1000 km/ 1 year Every 10000 km/ 3 years Tires Tire Pressure Inflate the tire until its pressure reaches 34-38 psi. √√√√ Tire Tread Wear Check whether the tire is cracked, deformed, worn, etc. √√√ Screws Handlebar Assembly Screws √√√√ Tighten the accelerator screw (with the recommended torque of 0.95 ± 0.1 N·m). √√ Tighten the brake lever screw (with the recommended torque of 7 ± 0.2 N·m). 19 11. Maintenance Service Object Actions √√√ Charge the scooter at a suitable temperature. The indicator on the battery charger is red when the scooter is charging, and turns green when the scooter is fully charged. The control panel will show the charging status simultaneously during charging. √√√ Turn the handlebar 60° to the left and right to make sure the turning angle is correct and the steering is free from resistance and stagnation. √√ Fully charge the scooter before leaving it unused for a long time, and turn it on to charge every 60 days. √ 2402~2480MHz 0.69dBm FS011-02 280.8wh 7.8Ah 15. Certification FCC Compliance Statement for USA This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 7. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one o「moreof the following measu「es: —Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. FCC Note Changes or modifications not expressly approved by the party responsible for compliance could void the user's auth ority to operate the equipment. FCC Radiation Exposure Statement The device has been evaluated to meet general RF exposu「e requirement. The device can be used in portable exposure condition without restriction. Environmental Instructions The scooter contains a rechargeable lithium-ion battery pack, and improper disposal of these batteries will cause harm to the environment. Follow the steps below to remove the batteries before disposing of the scooter and discard the batteries properly: 1. Before removing the batte「ies, it is bette「to use them up and make su「e the scoote「is disconnected f「om the power supply. Then unscrew the bottom cover of the scooter to remove it. 2. Unplug the battery connector, and then remove the batteries. Do not damage the battery case to avoid any risk of injuries. Do not use the battery if it is damaged, has a st「angeodor, emits smoke, or gets ove「heated.Keep a leaking battery away from other objects. 3. Discard the removed batteries at a professional recycling facility. 23 m Safety Warning For more information & after-sales support, contact us via [email protected]/www.naveetech.com WARNING Sharp Edges. Do not touch the sharp edges or corner…

Text truncated - open the document above for the full version.

Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd. CFR 47 §2.911(d)(5)(i)(ii) Attestation Letter Attestation Letter Date: 05/15/2023 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(i)(ii) Filing FCC ID: 2A4GZ-N303001C Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd. (“the applicant”) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature Contact Person: Wentao Shi Title: Manager Company Name & Address: Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd./ BuildingA2,ShangjinwanHeadquartersEconomicParkNo.2288,WuzhongAvenue,WuzhongEcono micDevelopmenZone, Suzhou Jiangsu, China

Brightway 05/15/20 FEDERA Authoriz 7435 Oak Columbi Ref: Atte FCC ID: Brightway 2.911(d)(7 applicant’ The appli c after the g related pr U.S. Age n Company FRN: 003 Address: 3 Contact P Phone: 70 Email: Su Sincerely Applican Brightwa Technolo Shi Went Title:Ma Signatur y Innovation CF 023 AL COMMU zation and Ev kland Mills R a, MD 2104 estation State 2A4GZ-N3 y Innovation I 7), designates ’s agent for se cant acknowl grantee has te roceeding inv nt Information y Name: FCC 33402884 3722 Illinois Person: Tim P 08-571-3148 upport@FCCU yours, nt’s Name: ay Innovation ogy (Suzhou) C tao anager re Intelligent Te FR 47 §2.9 UNICATION valuation Di Road 6 ements CFR 03001C Intelligent Te s the followin ervice of proc ledges the app erminated all volving the e n: US Agent, L Avenue, Sain ayne USAgent.com Intelligent Co., Ltd. echnology (Su 11(d)(7) A NS COMMI vision R 47 §2.911(d echnology (Su ng agent, loca cess. plicant’s acc l marketing a equipment. LLC nt Charles, IL m U T T S uzhou) Co., L Agent Desi SSIONS d)(7) Filing uzhou) Co., Lt ted in the Un eptance to m and importati L, 60174, USA US Agent for FCC US A gen Tim Payne Title: Manage Signature Ltd. ignation A td. (“the appli ited States, fo maintain an ag ion or the con A Service of Pro nt, LLC er CFR 47 §2.9 Attestation icant”) as req or purposes of gent for no le nclusion of a ocess’s Name: 911(d)(7) U.S n quired by sect f acting as the ess than one y any Commiss Agent ion e year sion-

QA-FR-170-B Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd. ADD:BuildingA2,ShangjinwanHeadquartersEconomicParkNo.2288,WuzhongAvenue,Wuz hongEconomicDevelopmenZone, Suzhou Jiangsu, China TEL: +86 18761903492 FAX: N/A E-mail: [email protected] FCC Authorization Date: 2023-05-15 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We , Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd., Hereby authorizes China Certification ICT Co., Ltd (Dongguan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by China Certification ICT Co., Ltd (Dongguan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Client’s signature Printed Name: Wentao Shi Title: Manager

QA-FR-171-A Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd. ADD:BuildingA2,ShangjinwanHeadquartersEconomicParkNo.2288,WuzhongAvenue,WuzhongEconomicDevelopmen Zone, Suzhou Jiangsu, China TEL: +86 18761903492 FAX: N/A E-mail: [email protected] FCC Confidential Authorization Date: 2023-05-15 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2A4GZ-N303001C In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, (Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd.) hereby requests long-term confidential treatment of information accompanying this application as outlined below:  Block Diagram  Schematics  Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature: Printed Name: Wentao Shi Title: Manager

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS button port adapter

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS battery chip ant

China Certification ICT Co., Ltd (Dongguan) Report No.: CR230526466-00B Page 46 of 47 5. RF EXPOSURE EVALUATION 5.1 FCC SAR test exclusion 5.1.1 Applicable Standard According to§15.247(i) and §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. According to KDB447498 D01 General RF Exposure Guidance v06: The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ꞏ [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. 5.1.2 Measurement Result For BLE: The max conducted power including tune-up tolerance is 1 dBm (1.26 mW). [(max. power of channel, mW)/(min. test separation distance, mm)][√f(GHz)] =1.26/5*(√2.480) = 0.4< 3.0 Result: Compliant. The stand-alone SAR evaluation is not necessary.

TESTING REPORT Customer Name: Deone (Shanghai) Communication & Technology Co., Ltd Product Name: 2.4GHz BLE Module Module Name: NDB1793S 1.1 Testing Location 1.2 Testing Environment 1.3 Antenna Dimensions 1.4 Test Data 1.41 S11 parameters 1.42 VSWR Data 1.43 Typical free space efficiency and gain 1.44 Typical free space radiation pattern

TEST REPORT Applicant: Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd. Address: Building A2, Shangjinwan Headquarters Economic Park, No.2288, Wuzhong Avenue, Wuzhong Economic Development Zone, Suzhou Jiangsu P.R. China FCC ID: 2A4GZ-N303001C IC: 28570-N303001C HVIN: V1.1.8 Product Name: NAVEE Electric Scooter Standard(s): 47 CFR Part 15, Subpart C(15.247) RSS-247 Issue 2, February 2017 RSS-Gen, Issue 5, February 2021 Amendment 2 ANSI C63.10-2013 KDB 558074 D01 15.247 Meas Guidance v05r02 The above equipment has been tested and found compliant with the requirement of the relative standards by China Certification ICT Co., Ltd (Dongguan) Report Number: CR230526466-00B Date Of Issue: 2023/5/24 Reviewed By: Sun Zhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-82016888 China Certification ICT Co., Ltd (Dongguan) Report No.: CR230526466-00B Page 2 of 47 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. The lab has been recognized as the FCC accredited lab under the KDB 974614 D01 and is listed in the FCC Public Access Link (PAL) database, FCC Registration No. : 442868, the FCC Designation No. : CN1314. The lab has been recognized by Innovation, Science and Economic Development Canada to test to Canadian radio equipment requirements, the CAB identifier: CN0123. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. China Certification ICT Co., Ltd (Dongguan) Report No.: CR230526466-00B Page 3 of 47 CONTENTS T EST FACILITY .......................................................................................................................................... 2 DECLARATIONS .......................................................................................................................................... 2 DOCUMENT REVISION HISTORY .......................................................................................... 5 1. GENERAL INFORMATION .................................................................................................... 6 1.1 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ....................................................... 6 1.2 DESCRIPTION OF TEST CONFIGURATION ........................................................................................... 8 1.2.2 Support Equipment List and Details .............................................................................................................. 8 1.2.3 Support Cable List and Details ...................................................................................................................... 8 1.2.4 Block Diagram of Test Setup ......................................................................................................................... 8 1.3 MEASUREMENT UNCERTAINTY ........................................................................................................ 10 2. SUMMARY OF TEST RESULTS .......................................................................................... 11 3. REQUIREMENTS AND TEST PROCEDURES .................................................................. 12 3.1 AC LINE CONDUCTED EMISSIONS .................................................................................................... 12 3.1.1 Applicable Standard ..................................................................................................................................... 12 3.1.2 EUT Setup.................................................................................................................................................... 14 3.1.3 EMI Test Receiver Setup ............................................................................................................................. 14 3.1.4 Test Procedure ............................................................................................................................................. 15 3.1.5 Corrected Amplitude & Margin Calculation ................................................................................................ 15 3.2 RADIATION SPURIOUS EMISSIONS .................................................................................................... 16 3.2.1 Applicable Standard ..................................................................................................................................... 16 3.2.2 EUT Setup.................................................................................................................................................... 16 3.2.3 EMI Test Receiver & Spectrum Analyzer Setup ......................................................................................... 17 3.2.4 Test Procedure ............................................................................................................................................. 18 3.2.5 Corrected Amplitude & Margin Calculation ................................................................................................ 18 3.3 6 DB EMISSION BANDWIDTH: .....................................................................…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Radiated Emission Below 1GHz View Radiated Emission Above 1GHz View Intentional radiator circuitry 1.2m Intentional radiator circuitry 1.5m