2A4GZ-N65IU600NAVEE Electric Scooter

04 NAVEE Electric Scooter Quick Start Guide * The iIllustrations in this QSG are for reference purposes only. The actual appearance shall be subject to actual product. SPU: N65i V≥5km/h Step on the deck with one foot, and slowly kicks off the other on the ground. When the scooter starts to coast, put both feet on the deck and gently press the accelerator. Note: This electric kick scooter is powered by an electric motor. For your riding safety, the motor will not start until the speed reaches 5 km/h. EN FR-CAPosez un pied sur le plancher, et utilisez l'autre pied pour décoller doucement sur le sol. Lorsque le scooter commence à avancer en roue libre, posez les deux pieds sur le plancher et appuyez doucement l’accélérateur. Conseils : Ce scouteur électrique est motorisé par un moteur électrique. Pour votre propre sécurité, le moteur ne démarrera pas tant que la vitesse n'aura pas atteint 5 km/h. 4. Starting & Accelerating & Decelerating & Braking/Démarrage et accélération et décélération et freinage ENBefore riding, please wear helmets, hand/ wrist pads, knee pads, elbow pads, and other protective gear at all times. Note: Check the tire pressure before riding. The recommended tire pressure is 45–50 psi. FR-CAAvant de rouler, veuillez porter en permanence un casque, des protège-mains/poignets, des protège-genoux, des protège-coudes et d'autres équipements de protection. Remarque : Vérifiez la pression des pneus avant de conduire. La pression recommandée des pneus est de 45–50 psi. ENRelease the accelerator to slow down, and squeeze the brake lever for a sudden brake. FR-CARelâcher l'accélérateur pour ralentir, et actionner le levier de frein pour un freinage brusque. 0 Scan the QR code to access electronic user manuals Scannez le Code QR pour accéder au Manuel d'utilisation électronique Original instructions XXX-NA 010203 3. Connect to the NAVEE App/Connexion avec l'appli NAVEE Scan the QR code to download and Install the App, then you can register/login. EN Numérisez le code QR pour télécharger et installer l'application, puis vous pourrez vous inscrire/vous connecter. FR-CA Power on the scooter, a blinking Bluetooth icon indicates the scooter is waiting for a connection. EN Allumez la trottinette , une icône Bluetooth clignotante indique que la trottinette est en attente de connexion. FR-CA Open the NAVEE app, click on [Link my device] and follow the instructions to link your scooter. EN Ouvrez l'application NAVEE, cliquez sur [Lier mon appareil] et suivez les instructions pour lier votre trottinette. FR-CA Link my device 1 23 1. Assembly/Montage EN Erect the stem to a complete upright position, lift up the safety lock and push the quick release lever inward tightly. Then open the kickstand. Redressez complètement le montant vertical, levez le verrou de sécurité et poussez fermement la clé de pliage vers l'intérieur. Déployez ensuite la béquille. FR-CA ENPress the safety lock and pull out the quick release lever. Then turn the handlebar 90° counterclockwise and push the quick release lever inward. FR-CAAppuyez sur le verrou de sécurité et tirez sur le levier de libération rapide. Tournez ensuite le guidon de 90° dans le sens inverse des aiguilles d'une montre et poussez le levier de libération rapide vers l'intérieur. 2. Charging/Recharge ≤30% += ≈ 30 ENCharge your scooter indoors, and never expose it to rain. The scooter is fully charged when the LED on the battery charger changes from red to green. FR-CACharger votre scouteur à l'intérieur et ne jamais l'exposer à la pluie. La charge complète de la trottinette est indiquée par le passage du rouge au vert de la LED du chargeur de batterie. FR-CALorsque la trottinette est éteinte pendant environ un mois ayant le niveau de batterie étant inférieur à 30%, la trottinette entrera en mode veille. Dans ce cas, la trottinette ne peut pas être allumée. Pour quitter le mode veille, charger la trottinette pendant environ trois secondes pour activer la batterie. ENWhen the scooter is turned off for about a month with the battery level of the scooter being lower than 30%, the scooter will enter sleep mode. In this case, the scooter cannot be turned on. To exit the sleep mode, charge the scooter for about three seconds to activate the battery. 2 3 1 2 90° 1 2 3 FCC Compliance Statement for USA This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. FCC Note Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. FCC Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Innovation, Sci…

Text truncated - open the document above for the full version.

Company name: Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd. ADD:BuildingA2,ShangjinwanHeadquartersEconomicParkNo.2288,WuzhongAvenue, WuzhongEconomicDevelopmenZone, Suzhou Jiangsu, China TEL: +86 18761903492 FAX: N/A E-mail: [email protected] CFR 47 §2.911(d)(5)(i) Attestation Letter QA-FR-1006-A RC 02-08-2023 Attestation Letter Date: 2024/08/22 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911((d) (5)(i) Filing FCC ID: 2A4GZ-N65IU600 Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd. (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature Printed Name: Wentao Shi Title: Manager

Company name: Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd. ADD:BuildingA2,ShangjinwanHeadquartersEconomicParkNo.2288,WuzhongAvenue, WuzhongEconomicDevelopmenZone, Suzhou Jiangsu, China TEL: +86 18761903492 FAX: N/A E-mail: [email protected] CFR 47 §2.911 (d)(5)(ii) Attestation Letter QA-FR-1007 -A RC 02-08-2023 Attestation Letter Date: 2024/08/22 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(5)(ii) Filing FCC ID: 2A4GZ-N65IU600 Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd. (“the applicant”) certifies that as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Signature Printed Name: Wentao Shi Title: Manager

U.S. AGENT LETTER OF ATTESTATION Date: 2024/08/22 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements CFR 47 §2.911(d)(7) Filing FCC ID: 2A4GZ-N65IU600 Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd. (“the Applicant”) certifies that, as of the date of the filing of the application, FCC US Agent, LLC is our designated U.S. agent for service of process for the above referenced FCC ID. Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd. (“the Applicant”) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. FCC US Agent, LLC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Applicant: FCC US Agent, LLC Address: 3722 Illinois Avenue, Saint Charles, IL 60174, USA FRN: 0033402884 Contact Name: Tim Payne Telephone No: 708-571-3148 Email: [email protected] Signature: Company Name: Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd. Address: BuildingA2,ShangjinwanHeadquartersEconomicParkNo.2288,WuzhongAvenue, WuzhongEconomicDevelopmenZone, Suzhou Jiangsu, China FRN: 0031966674 Email: [email protected] Signed by (printed name): Wentao Shi Signature:

QA-FR-170-B Company name: Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd. ADD:BuildingA2,ShangjinwanHeadquartersEconomicParkNo.2288,WuzhongAvenue, WuzhongEconomicDevelopmenZone, Suzhou Jiangsu, China TEL: +86 18761903492 FAX: N/A E-mail: [email protected] FCC Authorization Date: 2024/08/22 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We, Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd., hereby authorizes Bay Area Compliance Laboratories Corp. (Kunshan) to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corp. (Kunshan) on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely, Signature: Printed Name: Wentao Shi Title: Manager

QA-FR-171-A Company name: Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd. ADD:BuildingA2,ShangjinwanHeadquartersEconomicParkNo.2288,WuzhongAvenue, WuzhongEconomicDevelopmenZone, Suzhou Jiangsu, China TEL: +86 18761903492 FAX: N/A E-mail: [email protected] FCC Confidential Authorization Date: 2024/0 8/22 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: 2A4GZ-N65IU600 In accordance with Sections 0.457 and 0.459 of the Commission’s Rules, Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd. hereby requests long-term confidential treatment of information accompanying this application as outlined below: Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely, Signature: Printed Name: Wentao Shi Title: Manager

Bay Area Compliance Laboratories Corp. (Kunshan) Project No.: RKSA240822001 1 / 5 EXHIBIT A - EUT EXTERNAL PHOTOGRAPHS Antenna position Bay Area Compliance Laboratories Corp. (Kunshan) Project No.: RKSA240822001 2 / 5 Bay Area Compliance Laboratories Corp. (Kunshan) Project No.: RKSA240822001 3 / 5 Bay Area Compliance Laboratories Corp. (Kunshan) Project No.: RKSA240822001 4 / 5 Bay Area Compliance Laboratories Corp. (Kunshan) Project No.: RKSA240822001 5 / 5

I泣 坐笃RR川等EMENT 畛 － d ，

Bay Area Compliance Laboratories Corp. (Kunshan) Project No.: RKSA240822001 1 / 5 EXHIBIT B - EUT INTERNAL PHOTOGRAPHS Bay Area Compliance Laboratories Corp. (Kunshan) Project No.: RKSA240822001 2 / 5 Bay Area Compliance Laboratories Corp. (Kunshan) Project No.: RKSA240822001 3 / 5 Bay Area Compliance Laboratories Corp. (Kunshan) Project No.: RKSA240822001 4 / 5 Antenna Bay Area Compliance Laboratories Corp. (Kunshan) Project No.: RKSA240822001 5 / 5

Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RKSA240822001-00A FCC Part 15.247 Page 13 of 57 FCC §1.1307(b) & §2.1093 - RF EXPOSURE Applicable Standard According to§15.247(i) and §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. According to KDB447498 D01 General RF Exposure Guidance v06: The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where • f(GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. Measurement Result Mode Frequency Range (MHz) Max Tune-up Conducted Power Calculated Distance (mm) Calculated Value Threshold (1-g SAR) SAR Test Exclusion (dBm) (mW) BLE 2402-2480 6.0 3.98 5.0 1.23 3.0 Yes Result: So the standalone SAR evaluation is not necessary.

ReportNo.:RFI-LAB-RF-202004-DD12 QP030-E11 Page1of10 TestingReport CustomerName:XiaomiCommunicationTechnologyCo.LTD ProductName:2.4GHzBLEModule SampleModel:MHCB05P-B ReferenceStandard:GB/T9410-2008;ANSI/IEEEStd149-1979 IssueDate:2020.04.22 Engineer:Date: Auditor:Date: Approver:Date: ReportNo.:RFI-LAB-RF-202004-DD12 QP030-E11 Page2of10 Version VersionNo.DateDescriptionFormulateApproval A02020.04.22Forthefirsttime,formulate Amanda Eason Contents 1.GeneralInformation.........................................................................................................................3 1.1Generalinformationoftestinginstitutions...........................................................................3 1.2Testingprinciple...................................................................................................................3 1.3Testequipment......................................................................................................................4 1.4Testenvironment...................................................................................................................4 1.5Statement..............................................................................................................................4 2.SampleInformation.........................................................................................................................5 2.1Clientinformation.................................................................................................................5 2.2DescriptionofEUT(S)..........................................................................................................5 2.3EUTappearance....................................................................................................................6 2.4DUTsetupphotooffreespaceOTAtesting........................................................................6 3.TestResults......................................................................................................................................7 3.1Teststandard.........................................................................................................................7 3.2Testuncertainty.....................................................................................................................7 3.3Testdata................................................................................................................................8 3.3.1S11parameters...........................................................................................................8 3.3.2VSWRdata................................................................................................................8 3.3.3Typicalfreespaceefficiencyandgain......................................................................8 3.3.4Typicalfreespaceradiationpattern...........................................................................9 （Thefollowingisblank）..............................................................................................................10 ReportNo.:RFI-LAB-RF-202004-DD12 QP030-E11 Page3of10 1.GeneralInformation 1.1Generalinformationoftestinginstitutions Name ShenzhenRFI-LABCommunicationTechnologyCo.,Ltd. Address 10/FA,LingyunBld,LiufangRd,BaoanDistrict,SZ Tel 13682621346 E-mail [email protected] Equipment Alltheequipmentusedinthereportisfixedin 10/FA,LingyunBld,LiufangRd,BaoanDistrict,SZ 1.2Testingprinciple ReportNo.:RFI-LAB-RF-202004-DD12 QP030-E11 Page4of10 1.3Testequipment EquipmentModelNo.SerialNo.Manufacturer Calibration date Next calibration date 16probe microwave chamber 3*3*2.5RFI-LAB-010Sunyield2019.03.152021.03.14 Network Analyzer E5071BRFI-LAB-012Agilent 2019.10.232020.10.22 Network Analyzer E5071CRFI-LAB-032Agilent2019.10.232020.10.22 1.4Testenvironment Temperature 25.5°C Humidity 62%RH Pressure 100.32kPa 1.5Statement (1)Thetestresultsinthereportareonlyapplicabletothetestedsamplesandthetestedsamples workundertheenvironmentdescribedinthereport. (2)OnlyShenzhenRFI-LABCommunicationTechnologyCo.,Ltd.havetherighttomodifythe report,andthemodificationinformationshallbeannotatedintherevisionform. (3)Anyobjectiontothisreportshallberaisedwithin30daysafterformalconfirmationofthe report. (4)Thisreportisinvalidifthereisanyevidencethatthesampleinformationprovidedisfalsified. (5)Thereportisinvalidwithoutthesignatureoftheauditorandapprover. ReportNo.:RFI-LAB-RF-202004-DD12 QP030-E11 Page5of10 2.SampleInformation 2.1Clientinformation Name XiaomiCommunicationTechnologyCo.LTD Address / Contacts ZhuHuafang Tel 18327086899 E-mail [email protected] 2.2DescriptionofEUT(S) ProductName 2.4GHzBLEModule SampleModel MHCB05P-B PN T900YH0601G34 MAC 50EC50E3C92F TestItem VSWR;Antennagain;Efficiency;Radiationpattern FrequencyRange 2400-2500MHz ReceivedDate 2020.04.07 TestDate 2020.04.21 Remark ThelengthoftheRFcableis50mm ReportNo.:RFI-LAB-RF-202004-DD12 QP030-E11 Page6of10 2.3EUTappearance 2.4DUTsetupphotooffreespaceOTAtesting Planform Frontview ReportNo.:RFI-LAB-RF-202004-DD12 QP030-E11 Page7of10 3.TestResults 3.1Teststandard NameParameterMethodStandardno. Mobile communication antenna Antennagain Genericspecification forantennasusedinthe mobilecommunications GB/T 9410-2008 Radiationpattern VSWR Antenna Radiationefficiency IEEEStandardTest ProceduresforAntennas ANSI/IEEEStd 149-1979 Gainanddirectivity 3.2Testuncertainty TheuncertaintywascalculatedonthebasisoftheGUMpublishedbyISO,usingthe inclusionfactorofK=2andthe95%confidenceleveltoexpresstheextended uncertainty. ItemUncertainty VSWR±0.3 Antennagain ± 1dB Radiationefficiency±10% ReportNo.:RFI-LAB-RF-202004-DD12 QP030-E11 Page8of10 3.3 Testdata 3.3.1S11parameters 3.3.2VSWRdata 3.3.3Typicalfreespaceefficiencyandgain Frequency/MHz 240024502500 VSWR 2.02031.05022.4967 Frequency/MHz 24002410242024302440245024602470248024902500 PeakGain/dBi -0.110.120.180.20.170.03-0.1-0.56-1.04-1.68-2.38 Efficiency/% 42.7544.5945.5346.2845.4144.7842.2238.6834.6431.1226.95 ReportN…

Text truncated - open the document above for the full version.

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Kunshan). This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP, or any agency of the U.S.Government. FCC PART 15.247 TEST REPORT For Brightway Innovation Intelligent Technology (Suzhou) Co., Ltd. Building A2, Shangjinwan Headquarters Economic Park, No.2288, Wuzhong Avenue, Wuzhong Economic Development Zone, Suzhou Jiangsu P.R. China FCC ID: 2A4GZ-N65IU600 R e p o r t T y p e : O r i gi n a l R e p o r t P r o d u c t N a m e: N A V E E E l e c t r i c S c o o t e r Report Number: RKSA240822001-00A Report Date: 2024-11-21 Reviewed By: Bard Liu Approved By: Oscar Ye Prepared By: Bay Area Compliance Laboratories Corp. (Kunshan) No.248 Chenghu Road, Kunshan, Jiangsu Province, China Tel: +86-512-86175000 Fax: +86-512-88934268 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Kunshan) Report No.: RKSA240822001-00A FCC Part 15.247 Page 2 of 57 TABLE OF CONTENTS REPORT REVISION HISTORY................................................................................................................................. 4 GENERAL INFORMATION ....................................................................................................................................... 5 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 5 OBJECTIVE ................................................................................................................................................................... 5 TEST METHODOLOGY .................................................................................................................................................. 5 MEASUREMENT UNCERTAINTY .................................................................................................................................... 6 TEST FACILITY ............................................................................................................................................................. 6 SYSTEM TEST CONFIGURATION .......................................................................................................................... 7 DESCRIPTION OF TEST CONFIGURATION ...................................................................................................................... 7 EUT EXERCISE SOFTWARE .......................................................................................................................................... 7 SPECIAL ACCESSORIES ................................................................................................................................................. 7 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 7 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 9 EXTERNAL I/O CABLE.................................................................................................................................................. 9 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 9 TEST EQUIPMENT LIST ......................................................................................................................................... 11 SUMMARY OF TEST RESULTS ............................................................................................................................. 12 FCC §1.1307(b) & §2.1093 - RF EXPOSURE ........................................................................................................... 13 FCC §15.203 – ANTENNA REQUIREMENT .......................................................................................................... 14 APPLICABLE STANDARD ............................................................................................................................................ 14 ANTENNA CONNECTOR CONSTRUCTION .................................................................................................................... 14 FCC §15.207 (a) – AC LINE CONDUCTED EMISSIONS ..................................................................................... 15 APPLICABLE STANDARD ............................................................................................................................................ 15 TEST SYSTEM SETUP .................................................................................................................................................. 15 EMI TEST RECEIVER SETUP ....................................................................................................................................... 15 TEST PROCEDURE ...................................................................................................................................................... 16 TEST RESULTS SUMMARY .......................................................................................................................................... 16 TEST DATA: SEE APPENDIX ....................................................................................................................................... 16 FCC §15.209, §15.205 & §15.247(d) - SPURIOUS EMISSIONS............................................................................. 17 APPLICABLE STANDARD ............................................................................................................................................ 17 TEST SYSTEM SETUP .............................................................................…

Text truncated - open the document above for the full version.

Bay Area Compliance Laboratories Corp. (Kunshan) Project No.: RKSA240822001 1 / 4 EXHIBIT C - TEST SETUP PHOTOGRAPHS Conducted Emissions (Front View) Conducted Emissions (Left View) Bay Area Compliance Laboratories Corp. (Kunshan) Project No.: RKSA240822001 2 / 4 Radiated Emissions-Ground-parallel View (Below 30 MHz) Radiated Emissions-Perpendicular View (Below 30 MHz) Bay Area Compliance Laboratories Corp. (Kunshan) Project No.: RKSA240822001 3 / 4 Radiated Emissions-Parallel View (Below 30 MHz) Radiated Emissions (Below 1 GHz) Bay Area Compliance Laboratories Corp. (Kunshan) Project No.: RKSA240822001 4 / 4 Radiated Spurious Emissions (1 GHz-18GHz) Radiated Spurious Emissions ( 18 GHz-25 GHz) 1.5m 1.5m