2A5K5-MWCS3S1RWIRELESS CHARGER

4. When the product is turned over, the mobile phone can be placed horizontally/vertically to charge. 3. When charging a device such as a phone, iWatch or Bluetooth headset, place the phone, iWatch or Bluetooth headset flat in the charging area and after 0.1 seconds, start charging the device; When fully charged, you can directly remove the device; During charging, if the device needs to terminate charging, it can be removed directly. 5· The product can be folded for easy storage and portability. 1. When wireless charging other devices, please first power the product through the equipped charging cable. 2. Press the switch button of atmosphere light to turn on the 1st level atmosphere light; Press the switch button again to turn on the second gear of the environment light, and press the switch button three times to turn off the atmosphere light and repeat the cycle. T IT Ax Aligned word Three. operation steps After the product is connected to the power supply, the phone, iWatch and Bluetooth headset can be charged after being put down Product name WIRELESS CHARGER foldable Plastic + acrylic black Mode of use material color interface Input current Mobile phone output Watch output Headphone output adapter dimension compatibility Product listWireless charger x1, Charging cable x1, Instruction manual x1 Support Qi compliant mobile phones, Bluetooth headsets, Apple Watches Environmental light switch button Mobile phone wireless charging area 1. Product Introduction Two. specification parameters This product is a 4-in-1 fast wireless charger that simultaneously wirelessly charges phones /iWatch/TWS Bluetooth headsets that support the Ql standard. This product also adds the night atmosphere light design, is a convenient and practical intelligent electronic device. This product has a folding design. The folding way of the product makes it easier to store and carry; Open the charging panel state can charge multiple devices at the same time. You can charge your device wirelessly by placing it in the charging zone. You can put the phone vertically or horizontally, without affecting the charging of the phone, while charging, you can video chat or watch your favorite movie or TV. iWatch wireless charging area Type-C power port input:≥9V-3A, Bluetooth headset wireless charging area Night environment WIRELESS CHARGER Instruction manual Four. precautions 1. Do not immerse the product in water to avoid short circuit of the internal circuit. 2. Do not disassemble or break the product by yourself, so as not to cause product damage. 3. Please keep the product away from flammable and explosive liquids, gases or explosives. 4. Do not place magnetic cards, magnetic strip media and precision machinery too close to the product. FCC Statement： This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. ≥9V-3A 5W

1/1 USAgentforServiceofProcessLETTEROFATTESTATION TO: OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USAgentforServiceofProcess: CompanyName:HOPEKCORPORATIONINC Address:4358SBANNOCKSTENGLEWOOD,CO80110UnitedStates FRN:0034562900 ContactName:PeterDavis TelephoneNo:561-235-6113 E-mail:[email protected] ThisletteristoconfirmthattheUSAgentforServiceofProcessacceptsresponsibilitytoactas alocalrepresentativeonbehalfofMooasInc. TheUSAgentforServiceofProcessisawareofandagreestocomplywiththerequirements outlinedintheFCCEquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause §2.911. Applicant: CompanyName:MooasInc. ProductDescription:WIRELESSCHARGER FRN:0032071458 GranteeCode:2A5K5 FCCID:2A5K5-MWCS3S1R ContactName:CheolwooMun Address:C-819~822,MunjeongHyundaiKnowledgeIndustryCenter,7,Beobwon-ro11- gil,Songpa-gu,Seoul,Korea TelephoneNo:+82-70-7459-0901 E-mail:[email protected] TheApplicantisawareofandagreestocomplywiththerequirementsoutlinedintheFCC EquipmentAuthorizationProgram,ReportandOrderFCC22-84,andclause§2.911. ThisAgreementisvaliduntil(Permanentlyvalid). Date:2024/08/29 Applicant’sName:CheolwooMunUSAgentforServiceofProcess’sName: Title:CEOTitle:Manager SignatureSignature

customer name Customer Part Number Hui Boya material number specificati on number 01 43.4±0.3 40.0±0.5 13.5±0.5 5.3Ref±0.5 10.0Ref 3.0±1.0 2.2±0.5 30.0±1.0 0.8 ±0.1(Diskette thickness) p arameter test instrument L06.6±5%μH■TH1816B Q>60min■TH1816B DCR<50mΩ■CH-502BC ♦、temperature grade operating temperature -40°C~ 125°C ♦、bill of materials serial numberdescription supplierremark 1 disc setup PC95 Zinc 2 cddi Acrylic copper silk-covered wire 3 high-tempe rature tape Eco-friendly adhesive tape 4 tin Thousand island environmental tin 5 glue eco-friendly adhesive 6 glue 43 Double groove circular double-sided tape environmental compile date Product specification book 8MM 107H glue audit approver 100KHz/1V 100KHz/1V @ 25°C material specification 43.5*0.8*10T double-slotting 0.08*105P (3) Whether the starting and ending lines cross: Yes (4) Coil package 8mm wide high-temperature tape (5) The coil and magnetic disc need to be pasted in the center (6) Magnetic disc back 43 double slot circular double-sided tape ♦、electrical consideration specification test condition G H I (1) Wire diameter: 0.08*105P silk-covered wire (2) Winding number :12TS A B C D E F TX-HBY20220829004-45double-slotting12TS L= 20220829004 versions ♦、dimension error (unit: mm) Shenzhen JEDI Technology Co.,LTD Manufacturer: Anfu Hui Boya Electronics Co., LTD Address: Old cinema factory, Jintian Township, Anfu County, Ji 'an City, Jiangxi Province

customer name object ID specification number 01 46.0±1 83.0±1 80.0±1 27±0.5 19.5±0.5 19.0±0.5 19.0±0.5 parameter L(W1)6.8±10%μH L(W2)6.8±10%μH DCR(W1)41.8MaxmΩ■CH-502BC DCR(W2)44MaxmΩ■CH-502BC ♦temperature grade： operating temperature serial number description supplier 1 magnetic sheet 2 copper 3 high-temperature adhesive tape 4 tin 5 glue Product specification book double-sided tape Thousand island environmental tin authorized strengthauditapprover Wang HaiqiongJulianne 0.08*105P Standard with acrylic copper wire 8MM Eco-friendly adhesive paper 107H Eco-friendly adhesive tape -40°C~ 125°C bill of materials: material specification remake 8346*0.8 PC40 zinc barrier magnetic disc 100KHz/1V■TH1816B 100KHz/1V■TH1817B @ 25°C @ 25°C (3) Whether the starting and ending lines cross: W1 Yes; W2 is not (4) Double-sided tape is affixed to the bottom of the magnetic disc (5) The coil is placed in the middle of the magnetic disc ♦、电气特性: specificationtest conditiontest instrument G remark (1) Wire diameter: 0.08*105P silk-covered wire (2) Winding number :9TS A B C D E F Shenzhen JEDI Technology Co.,LTD 8646 small molds HBY20220902006-9T-L8020220902006 versions ♦boundary dimension (unit: mm) Manufacturer: Anfu Hui Boya Electronics Co., LTD Address: Old cinema factory, Jintian Township, Anfu County, Ji 'an City, Jiangxi Province

cus tomer name Customer Part Number Hui Boya material number specification number 001 27.0±0.5 24.5±0.5 8.0±0.5 11.0±2 2.0±1 parameter test instrument L010.3±10%μH■TH1816B Q>60min■TH1816B DCR<40mΩ■CH-502BC ♦、temperature grade operating temperature -40°C~ 125°C ♦、bill of materials serial number NAME supplier descr 1 magnetic sheet PC95 Zinc 2 copper coil Acrylic copper silk-covered wire 3 high-temper ature tape Eco-friendly adhesive tape 4 TIN Thousand island environmental tin 5 glue eco-friendly adhesive 6 glue authorized strength Xiao Shufang audit ratify Peng YongZhu HuiSS Product specification book G27 0.08*65P 4MM 107H glue 1 3M glue specificationtest condition 100KHz/1V 100KHz/1V @ 25°C material specification (2) Winding number :15TS (3) Whether the starting and ending lines cross: Yes (4) Strong magnetic: 7.8*5 (4800GS) ♦、electrical specification (1) Wire diameter: 0.06*65P silk-covered wire A B C D E TD-HBY20240625001-G27,L=12MM20240625001 versions ♦、boundary dimension (unit: mm) Manufacturer: Anfu Hui Boya Electronics Co., LTD Address: Old cinema factory, Jintian Township, Anfu County, Ji 'an City, Jiangxi Province

Mooas Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: August 29, 2024 Subject; Request for Confidentiality FCC ID: 2A5K5-MWCS3S1R To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Cheol woo Mun Title: CEO

Effective Date: April 2, 2020 QSF 7.6.4-8 – Agent Authorization Letter Template Page 1 of 1 Revision Date: Revision: 0 Mooas Inc. Date：Aug. 29, 2024 Product Model Number: MWCS3S1R FCC ID：2A5K5-MWCS3S1R To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Title: CEO Email: [email protected] Telephone: +82-70-7459-0901 On behalf of: Mooas Inc.

Ext Photos Photo 1 Photo 2 Photo 3 Photo 4 Photo 5 Photo 6

1.5cm Model name: MWCS3S1R KC: R孔M09- MWCS3 S1R 小 Made in China (Lot No.) Designed by竖竺� K o rea 2cm mooar 六:;-.��芍 ：：：：： :;;-:-:....- <\c,:&1.<\c,.tP.<\c,�tP.<\c,: 炙、。之、。久、 /、,P<\c,,P<\c,&'<\c,&'、/、/ 、 :&'_<\c,歹_<\c,女<\c,:,P 、 :,P_<\c,:,P_<\c, Label position FCC ID: 2A5K5-MWCS3S1R

Int Photo Photo 1 Photo 2 Photo 3 Photo 4 Earphone: ANT Phone: ANT Photo 5 Photo 6 Photo 7 Photo 8 Watch: ANT

- Page 1 of 12 - Report No.: HB2024021002E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: WIRELESS CHARGER Trade Mark: MOOAS Model Number: MWCS3S1R FCC ID: 2A5K5-MWCS3S1R Prepared for Mooas Inc. C-819~822, Munjeong Hyundai Knowledge Industry Center, 7, Beobwon-ro11-gil,Songpa-gu, Seoul, Korea Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 12 - Report No.: HB20240821002E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................. 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 7 2.1 TEST LABORATORY ..................................................................................................................................................... 7 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 7 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 7 2.4 TEST SOFTWARE ........................................................................................................................................................ 7 3 LIST OF TEST EQUIPMENT .................................................................................................................................. 8 4 RF EXPOSURE .................................................................................................................................................... 9 4.1 MAXIMUM PERMISSIBLE EXPOSURE .............................................................................................................................. 9 4.1.1. Limit ............................................................................................................................................................ 9 4.1.2. Test Procedures ........................................................................................................................................... 9 4.1.3. Equipment Approval Considerations item 5 b) of KDB 680106 D01 Wireless ........................................... 10 4.1.4. Test Setup .................................................................................................................................................. 10 4.1.5. Test Result ................................................................................................................................................. 11 5 PHOTOGRAPHS OF THE TEST SETUP ..................................................................................................................12 - Page 3 of 12 - Report No.: HB20240821002E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Mooas Inc. Address ................................. : C-819~822, Munjeong Hyundai Knowledge Industry Center, 7, Beobwon-ro11-gil,Songpa-gu, Seoul, Korea Manufacturer's Name .......... : Shenzhen JEDI Technology Co.,LTD Address ................................. : 6F, Building B,Xingzhongtai Science Park,Shangcun village,Gongming,Shenzhen Product description Product name ........................ : WIRELESS CHARGER Model Number ....................... : MWCS3S1R Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ....................... : KDB 680106 D01 Wireless Power Transfer v04 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : Aug. 21, 2024~Aug. 28, 2024 Test Result .............................................. : Pass Testing Engineer : ( Z o e Su) Technical Manager : (M i n g Liu) Authorized Signatory : (L e o S u) - Page 4 of 12 - Report No.: HB20240821002E-02 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Revision History Revised N…

Text truncated - open the document above for the full version.

- Page 1 of 32 - Report No.: HB20240821002E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Test Report Product: WIRELESS CHARGER Trade Mark: MOOAS Model Number: MWCS3S1R FCC ID: 2A5K5-MWCS3S1R Prepared for Mooas Inc. C-819~822, Munjeong Hyundai Knowledge Industry Center, 7, Beobwon-ro11-gil,Songpa-gu, Seoul, Korea Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 32 - Report No.: HB20240821002E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................. 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 6 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 6 2 SUMMARY OF TEST RESULT ............................................................................................................................... 7 3 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 8 3.1 TEST LABORATORY ..................................................................................................................................................... 8 3.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 8 3.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 8 3.4 TEST SOFTWARE ........................................................................................................................................................ 9 4 LIST OF TEST EQUIPMENT .................................................................................................................................. 9 5 TEST ITEM AND RESULTS ...................................................................................................................................10 5.1 ANTENNA REQUIREMENT .......................................................................................................................................... 12 5.2 CONDUCTED EMISSION ............................................................................................................................................. 13 5.3 RADIATED EMISSION ................................................................................................................................................ 17 5.4 OCCUPIED BANDWIDTH ............................................................................................................................................ 22 6 PHOTOGRAPHS OF THE TEST SETUP ..................................................................................................................24 7 PHOTOGRAPHS OF THE EUT..............................................................................................................................26 - Page 3 of 32 - Report No.: HB20240821002E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Mooas Inc. Address ................................. : C-819~822, Munjeong Hyundai Knowledge Industry Center, 7, Beobwon-ro11-gil,Songpa-gu, Seoul, Korea Manufacturer's Name .......... : Shenzhen JEDI Technology Co.,LTD Address ................................. : 6F, Building B,Xingzhongtai Science Park,Shangcun village,Gongming,Shenzhen Product description Product name ........................ : WIRELESS CHARGER Model Number ....................... : MWCS3S1R Standards ............................. : FCC Part 15C Test procedure ....................... : IEEE/ANSI C63.10-2020 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : Aug. 21, 2024~Aug. 28, 2024 Test Result .............................................. : Pass Testing Engineer : ( Z o e Su) Technical Manager : (Mi n g Liu) Authorized Signatory : (L e o S u) - Page 4 of 32 - Report No.: HB20240821002E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Revision History Revised No. Date of Issue Description 01 Aug…

Text truncated - open the document above for the full version.

- Page 1 of 2 - Test Setup Photos Radiated Emission Below 30MHz Radiated Emission Above 30MHz - Page 2 of 2 - Conducted emission MPE