2A5K5-MWCS7S1Mooas Crystal Lamp 3 in1 Magsafe Stand

2024.05.30

Mooas Inc. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 18-06-2024 FCC ID: 2A5K5-MWCS7S1 Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing (Mooas Inc.) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing rtifies that, as of the date of the filing of the application, the applicant (Mooas Inc.) ce is not identified on the Covered List (as a specifically named entity or any of its r affiliates)as an entity producing “covered” equipment. subsidiaries o Applicant: Mooas Inc. Address: C-819-822, Munjeong Hyundai Knowledge Industry Center, 7, Beobwon-ro 11-gil, Songpa- gu, Seoul, Korea, South Korea 05836 Contact Person: Cheol woo Mun Tel.: CEO Email: [email protected] Sincerely, Signature:

Mooas Inc. Address：C-819-822, Munjeong Hyundai Knowledge Industry Center, 7, Beobwon-ro 11-gil, Songpa- gu, Seoul, Korea, South Korea 05836 Date: 2024-06-19 Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Ref: Attestation Statements Part 2.911(d)(7) Filing SUBJECT: FCC Application for FCC ID: 2A5K5-MWCS7S1 FCC Registration Number (FRN): 0032071458 (Mooas Inc.) certifies that, as of the date of the filing of the application, GRZAN GROUP INC. is our designated U.S. agent for service of process for the above referenced FCC ID. (Mooas Inc.) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. GRZAN GROUP INC. accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: GRZAN GROUP INC. Address: 8825 53 AVE ELMHURST,NY 11373 FRN ：0034499368 Contact Person: Andy Smith Tel.: +1 (332) 201-5192 Email: [email protected] Sincerely, Signed on behalf of Mooas Inc. Signed on behalf of GRZAN GROUP INC. Name: Cheol woo Mun Name: Andy Smith Title: CEO Title: Manager Date: 2024-06-19 Date: 2024-06-19

Mooas Inc. Date：2024-06-19 Product Model Number: MWCS7S1 FCC ID：2A5K5-MWCS7S1 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Cheol woo Mun Contact Listed on FCC Wesbite Title: CEO Email: [email protected] Telephone: +82-70-7459-0901 On behalf of: Mooas Inc.

Mooas Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 19, 2024 Subject; Request for Confidentiality FCC ID: 2A5K5-MWCS7S1 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photosd User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Cheol woo Mun Title: CEO

Shenzhen Chenxing Electronic Technology Co., LTD Page 1 PRODUCT SPECIFICATION FOR APPROVAL A11 coil PRODUCT NAME PRODUCT SPEC Magnetic sheet：43.5*5.3*0.8 Double Slot Coil ：0.08*24*2*10Ts/Cable outlet 6mm inductance：6.3uH±10% Common double-sided tape 2022-10-05 DATE VERSION REV 1.0 RevisionModified ContentPrincipleDateNote REV 1.0 First releaseXue Lei 2022-08-29 PREPARED BYCHECKED BYAPPROVED BY Authorized signature & company chop Attached is the product specification, if you have any questions, please timely feedback to us, thank you! Page 2 SPECIFICATION 1. Product size Coil diameter A 43.5±0.5mm Coil outside diameter B 39±1mm Coil inside diameter C 20.5±0.5mm Product thickness D <1.8mm Outlet length E 25mm±3mm Solder length F 3±2mm Disc opening diameter G 5±0.3mm Magnetic sheet thickness 0.8±0.1mm Magnetic sheet shape Circular double slot Backing thickness Common double- sided tape Shatter-proof black film No Shenzhen Chenxing Electronic Technology Co., LTD Page 3 2. Schematic diagram 3. Winding parameter TERMINALWIRETurnsWinding Direction SF Silk-covered wire 0.08*24*2 10TsCCW 4. Electrical characteristics TEMPERATURE:25±10°C, RELATIVE HUMIDITY:65±20% ITEMTERMINAL SPECIFICATION TEST FREQUENCYTEST EQUIPMENTS IND.S-F 6.3uH±10% 100KHz/1.0VLCZ METER 1062B Shenzhen Chenxing Electronic Technology Co., LTD 5. Product picture

Page 1 PRODUCT SPECIFICATION FOR APPROVAL A11 coil PRODUCT NAME PRODUCT SPEC Transmitting coil sensitivity：6.5uH±10% Magnetic sheet specification：43.5*5.3*0.8 Double Slot Wire specification：0.07*100*10Ts/Cable outlet140mm Back adhesive/front 20*1mmEVA double-sided tape 2023-07-11 DATE VERSION REV 1.0 RevisionModified ContentPrincipleDateNote REV 1.0 First releaseXue Lei 2023-07-11 PREPARED BYCHECKED BYAPPROVED BY Authorized signature & company chop Attached is the product specification, if you have any questions, please timely feedback to us, thank you! Shenzhen Chenxing Electronic Technology Co., LTD SPECIFICATION 1. Product size 43.5±0.5mm 40.5±1mm 21.5±0.5mm <2.3mm 140mm±3mm 2-5mm 5±0.3mm 0.8±0.1mm Reverse plain double-sided tape front 20*1mmEVA Double-sided tape No Shenzhen Chenxing Electronic Technology Co., LTD Coil diameter A Coil outside diameter B Coil inside diameter C Product thickness D Outlet length E Solder length F Disc opening diameter G Magnetic sheet thickness Magnetic sheet shape Backing thickness Shatter-proof black film Circular double slot Page 2 2. Schematic diagram 3. Winding parameter TERMINALWIRETurnsWinding Direction SF 丝包线 0.07*100P 10TsCCW 4. Electrical characteristics TEMPERATURE:25±10°C, RELATIVE HUMIDITY:65±20% ITEMTERMINAL SPECIFICATION TEST FREQUENCYTEST EQUIPMENTS IND.S-F 6.5uH±10% 100KHz/1.0VLCZ METER 1062B Shenzhen Chenxing Electronic Technology Co., LTD 5.. Product picture Page 3

Fine Page1of 4 FY-GZ001 DESC: DATE: Version: SPECIFICATION FOR APPROVAL Apple Watch soft magnetic coil-CLB A.0 PREPARED BY CHECKED BY APPROVED BYCUSTOMER APPROVE Fine Page2of 4 FY-GZ001 Version Change History Rev. Before Change After Change Change DateApproved By A.0 ---- 2022/11/13 Fine Page3of 4 FY-GZ001 DESC Apple Watch soft magnetic coil-CLB Rev：A 0 CUST: Fine P/N： CUST P/N: 1. DIMENSION:(mm) 2.SCHEMATIC DIAGRAM: 3. Winding Specification: A 25±0.5mm B 2.5±0.5mm C 23.7±0.25mm D 20.5±1mm E 13.8±0.3mm H 7.8±0.3mm I 3±1mm J 8±2mm K 7.8*2.0mm L 注： 1.线圈贴磁片，磁片尺寸 24mm,厚度为2.7mm带缺口 2.线圈出线位置缠宽度 6mm ±0.5 高温胶纸。 3.磁片背面贴带手撕位圆形 直径23mm(ref) （ref）普通双面胶。 NO TERMINAL WIRETurns Winding Direction 1S F Silk-covered wire 0.08*24P 13TS 4. ELECTRICAL CHARACTERISTICS: TEMPERATURE:25 ±10°C, RELATIVE HUMIDITY:65 ±20% NO. ITEMTERMINAL SPECIFICATION TEST FREQUENCY TEST EQUIPMENTS 1 IND. S-F 5.8u H ±20% single coil 100KHz/1V LCZ METER 1062B 2 IND. S-F 8.1u H ±0.5% 100KHz/1V LCZ METER 1062B 3 Q值 S-F ≥35 100KHz/1V LCZ METER 1062B 4DCRS-F PREPARED DATE CHECKED DATE 2022/12/13 2022/12/13 Fine Page4of 4 FY-GZ001 DESC Rev：A 0 CUST: Fine P/N： CUST P/N: 5. PACKONG: 5.1 Packing pictures: 5.2 Packing Quantity: Item QuantityMaterial Box 240 Pcs370*265*55mm Big Carton 1680 Pcs380*270*220mm 5.3 The packaging shall be based on the existing packing plate and the actual delivery package shall prevail. If there is any requirement, we can customize it. 6. Material list: numberMaterial nameDescriptionManufacturer 1 Enameled wire 0.08*24 Enameled wire 0.08*24 2 Solder Bar Solder Bar 3 Magnetic sheet Φ25*13.8*2.6mm Manganese zinc soft magnetic sheet 4 glue 201 glue 5 magnet 7 8*2 mm 2900-3100 6 Double-sided tape with holes Circular diameter 20mm (ref) backing adhesive 7 PREPARED DATECHECKED DATE 2022/12/13 2022/12/13 Apple Watch soft magnetic coil-CLB

Model: MWCS7S1 Model: MWCS7S1 Model: MWCS7S1 Model: MWCS7S1

FCC ID LABEL: Label Location: FCC ID: 2A5K5-MWCS7S1

Model: MWCS7S1 Model: MWCS7S1 Model: MWCS7S1 Model: MWCS7S1 Model: MWCS7S1 Model: MWCS7S1 Model: MWCS7S1 Coil Antenna-Earphone Model: MWCS7S1 Coil Antenna-Phone Model: MWCS7S1 Coil Antenna-Watch Model: MWCS7S1

Page 1 of 15 Report No.: UNIA24052814ER-62 FCC MPE TEST REPORT FCC ID: 2A5K5-MWCS7S1 Sample : Mooas Crystal Lamp 3 in1 Magsafe Stand Trade Mark : N/A Main Model : MWCS7S1 Additional Model : N/A Report No. : UNIA24052814ER-62 Prepared for Mooas Inc. C-819-822, Munjeong Hyundai Knowledge Industry Center, 7, Beobwon-ro 11-gil, Songpa- gu, Seoul, Korea, South Korea 05836 Prepared by Shenzhen United Testing Technology Co., Ltd. D101&D401, No. 107, Kaicheng High-Tech Park, Taoyuan Community, Dalang Sub-District, Longhua District, Shenzhen, Guangdong, China Page 2 of 15 Report No.: UNIA24052814ER-62 TEST RESULT CERTIFICATION Applicant ............................... : Mooas Inc. Address .................................. : C-819-822, Munjeong Hyundai Knowledge Industry Center, 7, Beobwon-ro 11-gil, Songpa- gu, Seoul, Korea, South Korea 05836 Manufacturer ........................ : Shenzhen Sunrise Industry Co., LTD Address .................................. : Floor 4,Building E,HuaChuangDa,No.42 District Baoan, Shenzhen City,Guangdong Province,P.R.China. Product description Product .................................. : Mooas Crystal Lamp 3 in1 Magsafe Stand Trade Mark ............................. : N/A Model Name ........................... : MWCS7S1 Standards ......................... : FCC KDB680106 D01 Wireless Power Transfer v04 This device described above has been tested by Shenzhen United Testing Technology Co., Ltd., and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of UNI, this document may be altered or revised by Shenzhen United Testing Technology Co., Ltd., personnel only, and shall be noted in the revision of the document. Date of Test Date (s) of performance of tests ............ : May 29, 2024 ~ Jun. 05, 2024 Date of Issue ......................................... : Jun. 06, 2024 Test Result ............................................. : Pass Prepared by: Jason Ye/Editor Reviewer: Kelly Cheng/Supervisor Approved & Authorized Signer: Liuze/Manager Page 3 of 15 Report No.: UNIA24052814ER-62 Table of Contents Pages 1 TEST SUMMARY 4 1.1 TEST PROCEDURES AND RESULTS 4 1.2 TEST FACILITY 5 1.3 MEASUREMENT UNCERTAINTY 6 1.4 ENVIRONMENTAL CONDITIONS 6 2 GENERAL INFORMATION 7 2.1 GENERAL DESCRIPTION OF EUT 7 2.2 CARRIER FREQUENCY OF CHANNELS 8 2.3 TEST MODE 8 2.4 DESCRIPTION TEST PERIPHERAL AND EUT PERIPHERAL 9 2.5 TEST INSTRUMENTS 9 3 MAXIMUM PERMISSIBLE EXPOSURE 10 3.1 MAXIMUM PERMISSIBLE EXPOSURE 10 3.2 TEST PROCEDURE 11 3.3 TEST SETUP 11 3.4 RESULT OF MAXIMUM PERMISSIBLE EXPOSURE 12 3.5 TEST PHOTO 13 Page 4 of 15 Report No.: UNIA24052814ER-62 1 TEST SUMMARY 1.1 TEST PROCEDURES AND RESULTS FCC KDB680106 D01 Wireless Power Transfer v04 FCC CFR 47 Standard Section Test Item Result Remark FCC CFR 47 part1, 1.1310 KDB680106 D01 v04 Electric Field Strength (E) (V/m) N/A -- Magnetic Field Strength (H) (A/m) PASS -- Note: “N/A” denotes test is not applicable in this Test Report. Compliant with FCC KDB680106 D01 Wireless Power Transfer v04 section 5.2: 1) The power transfer frequency is below 1MHz. Yes, the working frequency is: 110-205kHz and 326.5kHz . 2) The output power from each transmitting element (e.g., coil) is less than or equal to 15 watts. Yes, the maximum output power is 15 watts. 3) A client device providing the maximum permitted load is placed in physical contact with the transmitter(i.e. , the surfaces of the transmitter and client device enclosures need to be in physical contact) Yes, the maximum permitted load is placed in physical contact with the transmitter. 4) Only $ 2.1091-Mobile exposure conditions apply (i.e., this provision does not cover $ 2.1093-Portable exposure conditions). Yes, this provision does not cover $ 2.1093-Portable exposure conditions. 5) The H-field strengths, at and beyond 20 cm surrounding the device surface, are demonstrated to be less than 50% of the applicable MPE limit, per KDB 447498, Table 1. These measurements shall be taken along the principal axes of the device, with one axis oriented along the direction of the estimated maximum field strength, and for three points per axis or until a 1/d (inverse distance from the emitter structure) field strength decay is observed. Symmetry considerations may be used for test reduction purposes. The device shall be operated in documented worst-case compliance scenarios(i.e. , the ones that lead to the maximum field components), and while all the radiating structures (e.g., coils or antennas) that by design can simultaneously transmit are energized at their nominal maximum power. Yes, The H-field strengths, at and beyond 20 cm surrounding the device surface, are demonstrated to be less than 50% of the applicable MPE limit ; coils or antennas) that by design can simultaneously transmit are energized at their nominal maximum power. Page 5 of 15 Report No.: UNIA24052814ER-62 6) For systems with more than one radiating structure, the conditions specified in (5) must be met when the system is fully loaded (i.e., clients absorbing maximum power available), and with all the radiating structures operating at maximum power at the same time, as per design conditions. If the design allows one or more radiating structures to be powered at a higher level while other radiating structures are not powered, then those cases must be tested as well. For instance, a device may use three RF coils powered at 5 W, or one coil powered at 15 W: in this case, both scenarios shall be tested. Yes, For systems with more than one radiating structure, the conditions specified in (5) must be met when the system is fully loaded (i.e., clients absorbing maximum power available), and with all the radiating structures operating at maximum power at the same time. 1.2 TEST FACILITY Test Firm : Shenzhen United Testing Technology Co., Ltd. Ad…

Text truncated - open the document above for the full version.

Page 1 of 23 Report No.: UNIA24052814ER-61 FCC RADIO TEST REPORT FCC ID: 2A5K5-MWCS7S1 Sample : Mooas Crystal Lamp 3 in1 Magsafe Stand Trade Mark : N/A Main Model : MWCS7S1 Additional Model : N/A Report No. : UNIA24052814ER-61 Prepared for Mooas Inc. C-819-822, Munjeong Hyundai Knowledge Industry Center, 7, Beobwon-ro 11-gil, Songpa- gu, Seoul, Korea, South Korea 05836 Prepared by Shenzhen United Testing Technology Co., Ltd. D101&D401, No. 107, Kaicheng High-Tech Park, Taoyuan Community, Dalang Sub-District, Longhua District, Shenzhen, Guangdong, China Page 2 of 23 Report No.: UNIA24052814ER-61 TEST RESULT CERTIFICATION Applicant .............................. : Mooas Inc. Address ................................. : C-819-822, Munjeong Hyundai Knowledge Industry Center, 7, Beobwon-ro 11-gil, Songpa- gu, Seoul, Korea, South Korea 05836 Manufacturer ........................ : Shenzhen Sunrise Industry Co., LTD Address ................................. : Floor 4,Building E,HuaChuangDa,No.42 District Baoan, Shenzhen City,Guangdong Province,P.R.China. Product description Product .................................. : Mooas Crystal Lamp 3 in1 Magsafe Stand Trade Mark ............................ : N/A Model Name .......................... : MWCS7S1 Test Methods ........................ : FCC Rules and Regulations Part 15 Subpart C Section 15.209 ANSI C63.10: 2013 This device described above has been tested by Shenzhen United Testing Technology Co., Ltd., and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval, this document may be altered or revised by Shenzhen United Testing Technology Co., Ltd., personnel only, and shall be noted in the revision of the document. Date of Test Date (s) of performance of tests ............. : May 29, 2024 ~ Jun. 05, 2024 Date of Issue .......................................... : Jun. 06, 2024 Test Result.............................................. : Pass Prepared by: Jason Ye/Editor Reviewer: Kelly Cheng/Supervisor Approved & Authorized Signer: Liuze/Manager Page 3 of 23 Report No.: UNIA24052814ER-61 Table of Contents Pages 1 TEST SUMMARY 4 1.1 TEST PROCEDURES AND RESULTS 4 1.2 TEST FACILITY 4 1.3 MEASUREMENT UNCERTAINTY 5 2 GENERAL INFORMATION 6 2.1 GENERAL DESCRIPTION OF EUT 6 2.2 CARRIER FREQUENCY OF CHANNELS 7 2.3 TEST MODE 7 2.4 TEST SETUP 7 2.5 DESCRIPTION TEST PERIPHERAL AND EUT PERIPHERAL 8 2.6 MEASUREMENT INSTRUMENTS LIST 9 3 CONDUCTED EMISSION 10 3.1 TEST LIMIT 10 3.2 TEST SETUP 10 3.3 TEST PROCEDURE 11 3.4 TEST RESULT 11 4 RADIATED EMISSION 14 4.1 TEST LIMIT 14 4.2 TEST SETUP 16 4.3 TEST PROCEDURE 17 4.4 TEST RESULT 17 5 ANTENNA REQUIREMENT 21 6 PHOTO OF TEST 22 6.1 RADIATED EMISSION 22 6.2 CONDUCTED EMISSION 23 Page 4 of 23 Report No.: UNIA24052814ER-61 1 TEST SUMMARY 1.1 TEST PROCEDURES AND RESULTS Item FCC Rules Description Of Test Result 1 FCC Part 15.207 Conducted Emission Pass 2 FCC Part 15.209(a) Radiated Emission Pass 3 FCC Part 15.203 Antenna Requirement Pass 1.2 TEST FACILITY Test Firm : Shenzhen United Testing Technology Co., Ltd. Address : D101&D401, No. 107, Kaicheng High-Tech Park, Taoyuan Community, Dalang Sub-District, Longhua District, Shenzhen, Guangdong, China The testing quality ability of our laboratory meet with "Quality Law of People's Republic of China" Clause 19.The testing quality system of our laboratory meets with ISO/IEC-17025 requirements. This approval result is accepted by MRA of APLAC. Our test facility is recognized, certified, or accredited by the following organizations: A2LA Certificate Number: 4747.01 The EMC Laboratory has been accredited by A2LA, and in compliance with ISO/IEC 17025:2017 General Requirements for testing Laboratories. FCC Registration Number: 674885 The EMC Laboratory has been registered and fully described in a report filed with the (FCC) Federal Communications commission. IC Registration Number: 31584 The EMC Laboratory has been registered and fully described in a report filed with the (IC) Industry Canada. Page 5 of 23 Report No.: UNIA24052814ER-61 1.3 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. A. Conducted Measurement: Test Site Method Measurement Frequency Range U, (dB) NOTE UNI ANSI 9KHz ~ 150KHz 2.96 150KHz ~ 30MHz 2.44 B. Radiated Measurement: Test Site Method Measurement Frequency Range U, (dB) NOTE UNI ANSI 9KHz ~ 30MHz 2.50 30MHz ~ 1000MHz 4.80 1000MHz ~ 6000MHz 4.13 Page 6 of 23 Report No.: UNIA24052814ER-61 2 GENERAL INFORMATION 2.1 GENERAL DESCRIPTION OF EUT Product: Mooas Crystal Lamp 3 in1 Magsafe Stand Trade Mark: N/A Main Model: MWCS7S1 Additional Model: N/A Model Difference: N/A FCC ID: 2A5K5-MWCS7S1 Operation Frequency: Phone: 110-205kHz Earphone: 110-205kHz Watch: 326.5kHz Modulation Type: ASK Wireless Charging Output Power: 5W/7.5W/10W/15W(MAX) Antenna Type: Coil Antenna Antenna Gain: 0dBi Battery: N/A Adapter: N/A Power Source: DC 5V or 9V by adapter Page 7 of 23 Report No.: UNIA24052814ER-61 2.2 CARRIER FREQUENCY OF CHANNELS Test Channel ANT Frequency (kHz) ANT Frequency (kHz) ANT Frequency (kHz) 01 132.9 02 156.1 03 326.5 2.3 TEST MODE NO. TEST MODE DESCRIPTION 1 ANT 1(Phone coil) + Full load 2 ANT 1(Phone coil) + Half load 3 ANT 1(Phone coil) + Null load 7 ANT 2(Earphone coil) + Full load 8 ANT 2(Earphone coil) + Half load 9 ANT 2(Earphone coil) + Null load 10 ANT 3(Watch coil) + Full load 11 ANT 3(Watch coil) + Half load 12 ANT 3(Watch coil) + Null load 13 ANT 1(Phone coil) + ANT 2(Earphone coil) + ANT 3(Watch coil) + Full load 14 ANT 1(Phone coil) + ANT 2(Earphone coil) + ANT 3(Watch coil) + Half load 15 ANT 1(Phone coil) + ANT 2(Earphone coil) + ANT 3(Watch coil) + Null load Note: Th…

Text truncated - open the document above for the full version.

Model: MWCS7S1 Radiated Emission test Model: MWCS7S1 Conducted Emission test MPE test Model: MWCS7S1 Model: MWCS7S1