2A5K5-MWCS9Flip Square 3-in-1 High-Speed wireless charging Mood Lamp

4. The phone can be placed horizontally/vertically to charge (like below photos). 3. When charge the phone, earphone and watch, just put the device on the product charging area, then it will start charging. And you can take away when the devices finished charging 5· The product can be folded for easy storage and portability. 1. Do not immerse the product in water to avoid short circuit of the internal circuit. 2. Do not disassemble or break the product by yourself, so as not to cause product damage. 3. Please keep the product away from flammable and explosive liquids, gases or explosives. 4. Do not place magnetic cards, magnetic strip media and precision machinery too close to the product. 1. When use the wireless charger, first use a PD/QC3.0 adapter and Type-C cable to charge it. 2. For the LED Night Light, first touch the switch button, it will show Low brightness (default), then touch again, it will show High brightness, then touch again, it will Light off. 3. Operation Steps 4.Precations After the product connected by the adapter, then place the phone, earphone, watch on the charging area, it will start charge Product name Flip Square 3-in-1 High-Speed wireless charging Mood Lamp (Compatible with Apple Watch, Galaxy watch) Plastic + PS black/white Materia color Charging Interface Phone Output Watch Output Earphone Output Product size compatibility Packing ListCharger * 1; Cable *1; User Manual *1 Support wireless charging phones that meet QI standards, Earphonel and watch Phone wireless charging area 1. Product Introduction 2.Specification Parameters This product is 3 in 1 wireless charger that simultaneously charge the phone, earphone and watch that support the QI standard. It is with LED Night Light design, it is convenient and intelligent device It is with a folding design, which makes it easy to store and carry. You can charge your phone, earphone and watch in the correct charging area, which is really nice to use. Watch wireless charging area Type-C Input charging port Earphone wireless charging area LED Night light Flip Square 3-in-1 High-Speed wireless charging Mood Lamp (Compatible with Apple Watch, Galaxy watch) MWCS9 User Manual LED light switch touch button 5W 152mm*135mm*18.5mm 3W Type-C Input 9 V-3A 5W/7.5W/10W/15W This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Mooas Inc C-819-822, Munjeong Hyundai Knowledge Industry Center, 7, Beobwon-ro 11-gil, Songpa-gu, Seoul, Korea (05836) Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2024/06/29 To whom it may concern: We, Mooas Inc hereby certify that the equipment for which authorization is sought (FCC ID: 2A5K5- MWCS9) is not “covered” equipment prohibited from receiving an equipment authorization pursuant to § 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing “covered” equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(b) and (d)(5) and (6). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Sincerely, Client’s signature: Client’s name / title : Cheol woo Mun/ CEO Mooas Inc. 62_[m odel] CoveredEqu_2.911(d)(5)(i) and (ii) - U, V03

Mooas Inc. 06/29/2024 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (Flip Square 3-in-1 High-Speed wireless charging Mood Lamp / # AND FCC ID: 2A5K5-MWCS9 To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - Block Diagram - Schematics - Operational Description required to be submitted with this application be permanently withheld from public review. The above documents are company proprietary information that could never get into the possession of your competition. Please contact me if there is any information you may need. Sincerely, Client’s signature: Client’s name / title : Cheol woo Mun/ CEO Mooas Inc.

Mooas Inc. 06/29/2024 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Shenzhen CTA Testing Technology Co., Ltd.) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature: Client’s name / title : Cheol woo Mun/ CEO Mooas Inc.

FCC ID: 2A5K5-MWCS9 External Photos of the EUT FCC ID: 2A5K5-MWCS9 FCC ID: 2A5K5-MWCS9

0.7*1.5cm

FCC ID: 2A5K5-MWCS9 Internal Photos of the EUT FCC ID: 2A5K5-MWCS9 FCC ID: 2A5K5-MWCS9 FCC ID: 2A5K5-MWCS9 FCC ID: 2A5K5-MWCS9 FCC ID: 2A5K5-MWCS9

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn FCC RF EXPOSURE REPORT FCC ID............................................. : 2A5K5-MWCS9 Compiled by ( position+printed name+signature) . : File administrators Jinghua Xiao Supervised by ( position+printed name+signature) . : Project Engineer Lushan Kong Approved by ( position+printed name+signature) . : RF Manager Eric Wang Date of issue .................................... : Jun. 28, 2024 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address ............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Applicant’s name ............................ : Mooas Inc Address ............................................ : C-819-822, Munjeong Hyundai Knowledge Industry Center, 7, Beobwon-ro 11-gil, Songpa-gu, Seoul, Korea (05836) Test specification ........................... : Standard ........................................... : KDB 680106 D01v04 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purpses as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : Flip Square 3-in-1 High-Speed wireless charging Mood Lamp (Compatible with Apple Watch, Galaxy watch) Trade Mark ....................................... : Mooas Manufacturer .................................... : Mooas Inc Model/Type reference ...................... : MWCS9 Listed Models .................................. : N/A Modulation Type ............................... : ASK Operation Frequency ........................ : From 115KHz~210KHz Rating ............................................... : Input: DC 9V-3A Wireless charging output(Phone): 5W/7.5W/10W/15W Wireless charging output(Watch ):3W Wireless charging output(Earphone):5W Result ............................................... : PASS FCC ID: 2A5K5-MWCS9 Page 2 of 14 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : Flip Square 3-in-1 High-Speed wireless charging Mood Lamp (Compatible with Apple Watch, Galaxy watch) Model /Type : MWCS9 Listed Models : N/A Applicant : Mooas Inc Address : C-819-822, Munjeong Hyundai Knowledge Industry Center, 7, Beobwon-ro 11-gil, Songpa-gu, Seoul, Korea (05836) Manufacturer : Mooas Inc Address : C-819-822, Munjeong Hyundai Knowledge Industry Center, 7, Beobwon-ro 11-gil, Songpa-gu, Seoul, Korea (05836) Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. FCC ID: 2A5K5-MWCS9 Page 3 of 14 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 1 Measuring Standard According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1091 RF exposure is calculated. According KDB680106 D01: KDB 680106 D01 Wireless Power Transfer v04. 2 Requirements According to the item 3 of KDB 680106 D01v04: Inductive wireless power transfer applications that meet all of the following requirements are excluded from submitting an RF exposure evaluation. (1) Mobile Device and Portable Device Configurations (2) Equipment Authorization Procedures for Devices Operating at Frequencies Below 4 MHz (3) The aggregate H-field strengths anywhere at or beyond 15 cm surrounding the device, and 20 cm away from the top surface. Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Limits for Maximum Permissible Exposure (MPE) FCC ID: 2A5K5-MWCS9 Page 4 of 14 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 3 Test Setup 4 Test Procedure 1) The RF exposure test was performed in anechoic chamber. 2) The measurement probe was placed at test distance (15 cm from all sides and 20 cm from the top) which is between the edge of the charger and the geometric center of probe. 3) The highest emission level was recorded and compared with limit as soon as measurement of each points (A, B, C, D, E) were completed. 4) The EUT was measured according to the dictates of KDB 680106 D01v04. Remark：The EUT’s test position A, B, C, D and E is valid for the E and H field measurements. 5 Equipment Approval Considerations The EUT does comply with KDB 680106 D01 as follow table. Requirements of KDB 680106 D01 Yes / No Description Mobile Device and Portable Device Configurations Yes Mobile Device Equipment Authorization Procedures for Devices Operating at Frequencies Below 4 MHz Yes The devi…

Text truncated - open the document above for the full version.

1. Antenna Description: Antenna type Loop coil antenna Model MWCS9 Frequency range 2400MHz-2500 MHz Manufacturer Mooas Inc Gain 0.00 dBi 2. Antenna Photo: Length:19.97mm diameter:3.53mm

1. Antenna Description: Antenna type Loop coil antenna Model MWCS9 Frequency range 2400MHz-2500 MHz Manufacturer Mooas Inc Gain 0.00 dBi 2. Antenna Photo: Length:40.53mm diameter:14.07mm

1. Antenna Description: Antenna type Loop coil antenna Model MWCS9 Frequency range 2400MHz-2500 MHz Manufacturer Mooas Inc Gain 0.00 dBi 2. Antenna Photo: Length:46.85mm diameter:10.73mm Length:40.50mm

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn FCC PART 15 SUBPART C TEST REPORT Report Reference No. .................... : FCC ID. ........................................... : CTA24062401501 2A5K5-MWCS9 Compiled by ( position+printed name+signature) .. : File administrators Jinghua Xiao Supervised by ( position+printed name+signature) .. : Project Engineer Lushan Kong Approved by ( position+printed name+signature) .. : RF Manager Eric Wang Date of issue .................................... : Jun. 28, 2024 Testing Laboratory Name ..............: Shenzhen CTA Testing Technology Co., Ltd. Address ............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Applicant’s name ...........................: Mooas Inc Address ............................................ : C-819-822, Munjeong Hyundai Knowledge Industry Center, 7, Beobwon-ro 11-gil, Songpa-gu, Seoul, Korea (05836) Test specification ...........................: Standard .......................................... : FCC Rules and Regulations Part 15 Subpart C (Section 15.209), ANSI C63.10: 2013 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purpses as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .....................: Flip Square 3-in-1 High-Speed wireless charging Mood Lamp (Compatible with Apple Watch, Galaxy watch) Trade Mark ....................................... : Mooas Manufacturer .................................... : Mooas Inc Model/Type reference ...................... : MWCS9 Listed Models .................................. : N/A Modulation Type............................... : ASK Operation Frequency ....................... : From 115KHz~210KHz Rating ............................................... : Input: DC 9V-3A Wireless charging output(Phone): 5W/7.5W/10W/15W Wireless charging output(Watch ):3W Wireless charging output(Earphone):5W Result ............................................... : PASS Report No.: CTA24062401501 Page 2 of 26 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test : Flip Square 3-in-1 High-Speed wireless charging Mood Lamp (Compatible with Apple Watch, Galaxy watch) Model /Type : MWCS9 Listed Models : N/A Applicant : Mooas Inc Address : C-819-822, Munjeong Hyundai Knowledge Industry Center, 7, Beobwon-ro 11-gil, Songpa-gu, Seoul, Korea (05836) Manufacturer : Mooas Inc Address : C-819-822, Munjeong Hyundai Knowledge Industry Center, 7, Beobwon-ro 11-gil, Songpa-gu, Seoul, Korea (05836) Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA24062401501 Page 3 of 26 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1 T E S T S T A N D A R D S ................................................................. 4 2 S U M M A R Y............................................................................. 5 2.1 General Remarks 5 2.2 Product Description 5 2.3 Description of the test mode 5 2.4 Special Accessories 5 2.5 Modifications 5 3 T E S T E N V I R O N M E N T .............................................................. 6 3.1 Address of the test laboratory 6 3.2 Test Facility 6 3.3 Environmental conditions 6 3.4 Summary of measurement results 7 3.5 Statement of the measurement uncertainty 7 3.6 Equipments Used during the Test 7 4 T E S T C O N D I T I O N S A N D R E S U L T S ............................................. 9 4.1 AC Power Conducted Emission 9 4.2 Radiated Emission 12 4.3 The 20dB bandwidth 16 4.4 Antenna Requirement 17 5 T E S T S E T U P P H O T O S O F T H E E U T ......................................... 18 6 PH O T O S O F T H E E U T ........................................................... 19 Report No.: CTA24062401501 Page 4 of 26 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 1 T E S T S T A N D A R D S The tests were performed according to following standards: FCC Rules and Regulations Part 15 Subpart C (Section 15.207): Conducted limits. FCC Rules and Regulations Part 15 Subpart C (Section 15.209): Radiated emission limits; general requirements. ANSI C63.10: 2013: American National Standard for Testing Unlicensed Wireless Devices Report No.: CTA24062401501 Page 5 of 26 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 2 S U M M A R Y 2.1 General Remarks Date of receipt of test sample : Jun. 22, 2024 Testing commenced on : Jun. 22, 2024 Testing concluded on :…

Text truncated - open the document above for the full version.

FCC ID: 2A5K5-MWCS9 Test Setup Photos of the EUT