2A5MDAR-04JUKEBOX

Troubleshooting – In case of trouble with the unit, please look through this chart and see if you can solve the problem by yourself before calling the Service Center – PROBLEMCAUSESOLUTION WHOLE UNIT Power does not come on when the power switch is pressed Unit is UnpluggedConnect the unit to the power adaptor supplied with the product No sound comes out of the speakers The volume is turned down to low level. The input selector does not match the playback/source Adjust the volume. Re-select the desired input source. The Sound is noisyThe unit is too close to a TV Set or another such device Turn off the TV or other appliance or re-locate the Jukebox device TUNER Cannot listen to any station or signal appears weak The station is not tuned-in properly. ATV set is being used nearby and is interfering with the radio reception Tune-in the desired station properly. Turn-Off the interfering TV set. The sound is distorted. The antenna is not oriented properly Re-orient the antenna until the reception improves CD PLAYER CD stops immediately after starting, or unit pauses or stops during play The CD is inserted upside down. The CD is dusty or dirty or there is condensation on the CD. Insert the CD with the printed side right-side up. Carefully clean and dry the CD No soundThe CD Player is PausedPress the Play/Pause button to resume playing the track Specific CD is noisy or playback stops or skips The CD is scratched or damaged. The disc is very dirty. The CD should be changed. Carefully clean the CD “nod” is shown on the CD display The CD is scratched or damaged. The disc is very dirty. The CD should be changed. Carefully clean the CD THE OPERATING INSTRUCTIONS REFLECT THE CURRENT TECHNICAL SPECIFICATION OF THIS PRODUCTAT TIME OF PRINT. WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS FOR TECHNICAL REASONS WITHOUT PRIOR NOTICE. 12 JUKE BOX OWNERS MANUAL MODEL: JSY-04C AM/FM VINTAGE CDMP3.USB.SD.BT JUKE BOX INSTRUCTION MANUAL PLEASE READ ALL INSTRUCTIONS CAREFULLYAND RETAIN FOR FUTURE USE IMPORTANT SAFETY INSTRUCTIONS 1.Read Instructions – All the safety and operating instructions should be read before the product is operated. 2.Retain Instructions – The safety and operating instructions should be retained for future reference. 3.Heed Warnings – All warnings on the product and in the operating instructions should be followed. 4.Follow all instructions – All operating and user instructions must be followed. 5.Cleaning – Unplug this product from the wall electric socket before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 6.Attachments – Do not use attachments not recommended by the product manufacturer as they may cause hazards. 7.Water & Moisture – Do no use this product near water – For example, near Bath tub, wash bowl, kitchen sink or laundry tub, or near swimming pool etc. 8.Do not place this product on an unstable stand, tripod, bracket or table. 9.Ventilation –Slots and openings in the cabinet are provided for ventilation, to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to. 10. Power Source – This product should be operated nly from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. 11. Power Cord Protection – Power supply cords should be routed so that they are not likely to be walked on or by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. 12. Lightning – For added protection for this product, during a lightning storm or when it is left unattended and unused for long period of time, unplug it from the wall outlet. This will prevent damage to the product due to lightning and power-line surges. 13. Overloading – Do not overload the wall electric socket, extension cords as this can result in a risk of fire or electric shock. 14. Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 15. The product should be placed away from heat sources such as radiators, stoves or other products (including amplifiers) that produce Heat. 2 Using the USB Input Function This Jukebox features a USB 2.0 input which enables MP3 fles to be loaded on to a USB 2.0 flash drive and played back through the Jukebo . Insert the USB drive into the USB input on the Jukebox and press the Power /Mode button on the control panel to switch ON. Press the Power /Mode button on the Jukebox repeatedly until “USb” is shown on the LCD display. If the tracks have been loaded on to the drive correctly, the LCD display will show the number of folders loaded on to the USB drive by showing “F” followed by 3 numbers (example “F004” indicates there are 4 folders loaded on to the drive), and then display the number of individual tracks loaded on to the drive(example, “027” indicates that there are 27 tracks loaded on the drive in total). The Jukebox will automatically start playing from the USB drive. Playing and Pausing a Track To either: a) Play a track when the USB is in STOP mode; b) Pause any tracks that are playing or; c) Play a track when it is paused Press the Pause /Play button. Stopping a Track from Playing To stop the USB from playing, press the Stop /Band button. If you wish to commence playing from Track 1 again, press the Pause /Play button again. To Skip to the Next Track To skip to the next track, press the Next /Tuner+ button on the control panel. It will skip to the next track in the…

Text truncated - open the document above for the full version.

Appendix- AR-04-Photos Page 3 of 14 2. Photographs –Constructional Details 2.1. EUT – External View Model AR-04 FCC ID: 2A5MDAR-04 Appendix- AR-04-Photos Page 4 of 14 Appendix- AR-04-Photos Page 5 of 14 Appendix- AR-04-Photos Page 6 of 14

AR-04 Label Sample and Location

Appendix- AR-04-Photos Page 7 of 14 2.2. EUT – Internal View Model AR-04 FCC ID: 2A5MDAR-04 Appendix- AR-04-Photos Page 8 of 14 Soundbar Appendix- AR-04-Photos Page 9 of 14 Appendix- AR-04-Photos Page 10 of 14 Appendix- AR-04-Photos Page 11 of 14 Appendix- AR-04-Photos Page 12 of 14 BT Ant. Appendix- AR-04-Photos Page 13 of 14 Appendix- AR-04-Photos Page 14 of 14 ======End======

Waltek Testing Group Co., Ltd. http://www.waltek.com.cn Page 1 of 7 TEST REPORT Referen ce No. .................... : WTD22D04080420W002 FCC ID ................................ : 2A5MDAR-04 Applicant ............................ : HiFun Design and Trading, Inc Address .............................. : 4575 Webb Bridge Rd #4193, Alpharetta, GA, US Manufacturer .................... : Huizhou City Huiyang QU Xinxu Town JinShunYan Electronic Processing Factory Address .............................. : Tangxia Chanjing village, Xinxu Town, Huiyang District, Huizhou City, Guangdong ,China Product ............................... : JUKEBOX Model(s) ............................. : AR-04, AR-04A, AR-04B, AR-04C, AR-04D, AR-04E, AR-04F, AR-04G, AR-04H, AR-04I, AR-04J Standards........................... : FCC Part 1.1307 Date of Receipt sample .... : 2022-04-26 Date of Test ....................... : 2022-04-27 to 2022-05-31 Date of Issue ...................... : 2022-05-31 Test Result ......................... : Pass Remarks: The re sults shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group Co., Ltd. Address: No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China Tel: +86-769-2267 6998 Fax: +86-769-2267 6828 Compiled by: Approved by: Ford Wang / Project Engineer Daniel Liu / Designated Reviewer Reference No.: WTD22D04080420W002 Page 2 of 7 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 2. Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2. CONTENTS ............................................................................................................................................................ 2 3. REVISION HISTORY ............................................................................................................................................ 3 4. GENERAL INFORMATION .................................................................................................................................. 4 4.1. GENERAL DESCRIPTION OF E.U.T. ............................................................................................................ 4 4.2. DETAILS OF E.U.T. ..................................................................................................................................... 4 4.3. TEST FACILITY ............................................................................................................................................ 4 5. TEST SUMMARY .................................................................................................................................................. 5 6. RF EXPOSURE ...................................................................................................................................................... 6 6.1. REQUIREMENTS .......................................................................................................................................... 6 6.2. THE PROCEDURES / LIMIT ........................................................................................................................... 6 6.3. MPE CALCULATION METHOD .................................................................................................................... 7 Reference No.: WTD22D04080420W002 Page 3 of 7 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 3. Revision History Test report No. Date of Receipt sample Date of Test Date of Issue Purpose Comment Approved WTD22D04080420 W002 2022-04-26 2022-04-27 to 2022-05-31 2022-05-31Original - Valid Reference No.: WTD22D04080420W002 Page 4 of 7 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 4. General Information 4.1. General Description of E.U.T. Product: JUKEBOX Model(s): AR-04, AR-04A, AR-04B, AR-04C, AR-04D, AR-04E, AR-04F, AR-04G, AR-04H, AR-04I, AR-04J Model difference: Only the models name are different. Model AR-04 was tested in this report. Operation Frequency: 2402-2480MHz, 79 Channels in total Antenna installation: internal permanent antenna Antenna Gain: 0dBi Type of Modulation: GFSK, π/4DQPSK, 8DPSK Hardware Version: BYLO3-B.(MP3)-MAIN Software Version: UO1 4.2. Details of E.U.T. Max. RF output power: 4.93dBm Ratings: Input: AC 100-240V 50/60Hz 0.35A from adapter Output: DC 9.0V == 1.0A Adapter: Manufacturer: DongGuan Guanjin Electronics Technology Co.,Ltd Model No.: K12V090100U 4.3. Test Facility The test facility has a test site registered with the following organizations: ISED CAB identifier: CN0013. Test Firm Registration No.: 7760A. Waltek Services(Shenzhen) Co., Ltd. Has been registered and fully described in a report filed with the Industry Canada. The acceptance letter from the Industry Canada is maintained in our files. Registration number 7760A, October 15, 2016. FCC Designation No.: CN1201. Test Firm Registration No.: 523476. Waltek Services(Shenzhen) Co., Ltd. EMC Laboratory `has been registered and fully described in a report filed with the (FCC) Federal Communications Commission. The acceptance letter from the FCC is maintained in our files. Registration number 523476, September 10, 2019. Reference No.: WTD22D04080420W002 Page 5 of 7 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 5. Test Summary Test Items Test Requirement Result Maximum Permissible Exposure (Exposure of Humans to RF Fields) 1.1307 PASS Reference No.: WTD22D04080420W002 Page 6 of 7 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 6. RF Exposure Test Requirement: FCC Part 1.1307 Evaluation Method: FCC Part 2.1091 & KDB 447498 D01 General RF Exposure Guidance v06 6.1. Requirements Systems operating under the provisions of this sect…

Text truncated - open the document above for the full version.

Walte k Testing Group Co., Ltd. http://www.waltek.com.cn Page 1 of 64 TEST REPORT Re ference No. .................... : WTD22D04080420W001 FCC ID ................................ : 2A5MDAR-04 Applicant ........................... : HiFun Design and Trading, Inc Address ............................. : 4575 Webb Bridge Rd #4193, Alpharetta, GA, US Manufacturer .................... : Huizhou City Huiyang QU Xinxu Town JinShunYan Electronic Processing Factory Address ............................. : Tangxia Chanjing village, Xinxu Town, Huiyang District, Huizhou City, Guangdong ,China Product .............................. : JUKEBOX Model(s). ............................ : AR-04, AR-04A, AR-04B, AR-04C, AR-04D, AR-04E, AR-04F, AR-04G, AR-04H, AR-04I, AR-04J Standards .......................... : FCC CFR47 Part 15 Section 15.247 Date of Receipt sample .... : 2022-04-26 Date of Test ....................... : 2022-04-27 to 2022-05-31 Date of Issue ..................... : 2022-05-31 Test Result ........................ : Pass Remarks: The results shown in this test report refer only to the sample(s) tested, this test report cannot be reproduced, except in full, without prior written permission of the company. The report would be invalid without specific stamp of test institute and the signatures of compiler and approver. Prepared By: Waltek Testing Group Co., Ltd. Address: No. 77, Houjie Section, Guantai Road, Houjie Town, Dongguan City, Guangdong, China Tel: +86-769-2267 6998 Fax: +86-769-2267 6828 Compiled by: Approved by: Ford Wang / Project Engineer Daniel Liu /Designated Reviewer Reference No.: WTD22D04080420W001 Page 2 of 64 Waltek Testing Group Co., Ltd. http://www.waltek.com.cn 2 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 CONTENTS ............................................................................................................................................................ 2 3 REVISION HISTORY ............................................................................................................................................ 4 4 GENERAL INFORMATION .................................................................................................................................. 5 4.1 GENERAL DESCRIPTION OF E.U.T ................................................................................................................. 5 4.2 DETAILS OF E.U.T ........................................................................................................................................... 6 4.3 CHANNEL LIST ................................................................................................................................................. 6 4.4 TEST MODE ..................................................................................................................................................... 6 4.5 TEST FACILITY ................................................................................................................................................. 7 5 EQUIPMENT USED DURING TEST .................................................................................................................. 8 5.1 EQUIPMENTS LIST ........................................................................................................................................... 8 5.2 MEASUREMENT UNCERTAINTY ....................................................................................................................... 9 5.3 SUBCONTRACTED ............................................................................................................................................ 9 6 TEST SUMMARY ................................................................................................................................................ 10 7 CONDUCTED EMISSION .................................................................................................................................. 11 7.1 E.U.T. OPERATION ....................................................................................................................................... 11 7.2 EUT SETUP ................................................................................................................................................... 11 7.3 MEASUREMENT DESCRIPTION ...................................................................................................................... 11 7.4 CONDUCTED EMISSION TEST RESULT ......................................................................................................... 12 8 RADIATED EMISSIONS ..................................................................................................................................... 14 8.1 EUT OPERATION ........................................................................................................................................... 14 8.2 TEST SETUP .................................................................................................................................................. 15 8.3 SPECTRUM ANALYZER SETUP ...................................................................................................................... 16 8.4 TEST PROCEDURE ........................................................................................................................................ 17 8.5 CORRECTED AMPLITUDE & MARGIN CALCULATION ..................................................................................... 17 8.6 SUMMARY OF TEST RESULTS ....................................................................................................................... 18 9 BAND EDGE MEASUREMENT ........................................................................................................................ 21 9.1 TEST PROCEDURE ..........................…

Text truncated - open the document above for the full version.

Appendix- AR-04-Photos Page 1 of 14 1. Test Setup photos Model AR-04 FCC ID: 2A5MDAR-04 1.1 Photograph – Conducted Emission Test Setup For Conducted Emission Test Site 1# 1.2 Photograph – Radiated Emissions For 30MHz-1000MHz Test Site 2# Appendix- AR-04-Photos Page 2 of 14 For Above 1GHz Test Site 2#