2A6RN-WCT1000Sous Vide

User Manual Model:SV03 01 Sous Vide Station 15 14 17 16 6 13 20 21 19 22 11 10 12 1 3 4 7 2 5 23 8 9 18 1 Main Unit 13 Notch 2 Touch Panel 14 Vacuum Sealer 3 Power Button 15 Vacuum Sealer On/Off Button 4 Tank Lock 16 Storage Cap (on the Vacuum Sealer) 5 Release Button 17 Wireless Charging Receiver 6 Silicon Rubber Seal Rings 18 Vacuum Sealer Indicator Light 7 Wireless Charger 19 Vacuum Bag 8 Water Tank Lid 20 Valve 9 Water Tank 21 Hook 10 Filter 22 Weight 11 Water Inlet 23 Plug 12 Water Outlet 0302 e) Do not use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury. f) Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause explosion. The temperature of 130°C can be replaced by the temperature of 265°F. g) Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire. h) Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained. i) Do not modify or attempt to repair the appliance or the battery pack (as applicable) except as indicated in the instructions for use and care. j) Do not charge the battery at ambient temperature below 39°F (4°C) or above 104 °F (40°C). Also keeping the temperature range of between 39-104°F when storing unit or during use. Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire. 16. The food must be vacuum sealed in a Vacuum Bag before Sous Vide cooking. 17. An acid bath must be performed when there is an alert on the Touch Panel to clean the mineral deposits. 18. Do not block the Water Inlet and Outlet of the Water Tank. 19. Do not immerse the Vacuum Sealer in water. Save these Instructions. IMPORTANT SAFEGUARDS WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. To protect against electrical shock do not immerse cord, plugs, or the main unit in water or other liquid. 4. Close supervision is necessary when any appliance is used by or near children. 5. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment. 7. The use of accessory attachments not recommended by the appliance manufacturer may cause injuries. 8. Do not use outdoors. 9. Do not let cord hang over edge of table or counter, or touch hot surfaces. 10. Do not place on or near a hot gas or electric burner, or in a heated oven. 11. Extreme caution must be used when moving an appliance containing hot oil or other hot liquids. 12. To disconnect, turn any control to "off", then remove plug from wall outlet. 13. Do not use appliance for other than intended use. 14. Extension Cord: a) A short power-supply cord is provided to reduce the risk resulting from becoming entangled or tripping over a longer cord. b) Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use. c) If a longer detachable power-supply cord or extension cord is used: 1) The marked electrical rating of the cord set or extension cord should be at least as great as the electrical rating of the appliance; 2) The cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally; and 3) If the appliance is of the grounded type, the cord set or extension cord should be a groundingtype 3-wire cord. 15. Battery using instruction: a) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to battery pack, picking up or carrying the appliance. Carrying the appliance with your finger on the switch or energizing appliance that have the switch on invites accidents. b) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. c) Use appliances only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. 0504 Switching On and Off Switching on Sous Vide Station • The appliance will automatically switch on when the power cord is plugged in. • When the appliance is switched off, press the Power Button and hold for 3 seconds to switch it on. Switching off Sous Vide Station • When the appliance is switched on, press the Power Button and hold for 3 seconds to switch it off. • To save energy, the appliance switches off automatically after 20 minutes when not in use. • After switching off the appliance, unplug it when it is not in use. Vacuum Sealer Vacuum sealing the bags • Place the Vacuum Sealer on the Valve of the Vacuum Bag. • Press the On/Off button on the Vacuum Sealer to start. • The Vacuum Sealer stops automatically when the vacuum pressure reaches the right level. • The Vacuum Sealer can be manua…

Text truncated - open the document above for the full version.

Shenzhen Typhur Technology Co., Ltd Date: 4/17/2023 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(5) Attestation FCC ID: 2A6RN-WCT1000 FRN: 0032366403 1. Shenzhen Typhur Technology Co., Ltd (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. 2. Shenzhen Typhur Technology Co., Ltd (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Company Name: Shenzhen Typhur Technology Co., Ltd Contact Name: Wilson Huang Address: 22 Floor, Prince Plaza, 51 Taizi Road Shuiwan Community, Zhaoshang Street, Nanshan Shenzhen China Date: 04/25/2023

Shenzhen Typhur Technology Co., Ltd Date: 4/19/2023 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) Agent Designation Attestation FCC ID: 2A6RN-WCT1000 Shenzhen Typhur Technology Co., Ltd (“the applicant”) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicant’s agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 §2.929(c) to inform the FCC whenever the agent information changes. U.S. Agent Information: Contact Person: Allen Fung Company Name:Typhur Inc. Company Address: 2890 Zanker Rd, Suite 120, San Jose, CA 95134 Email: [email protected] Sincerely yours, Company Name: Shenzhen Typhur Technology Co., Ltd Contact Name: Wilson Huang Address: 22 Floor, Prince Plaza, 51 Taizi Road Shuiwan Community, Zhaoshang Street, Nanshan Shenzhen China Date: 04/25/2023

Typhur Inc. Date: 4/24/2023 Federal Communications Commissions Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 §2.911 (d)(7) FCC US Agent Letter of Attestation Grantee Code: 2A6RN Grantee’s FRN:0032366403 To whom it may concern: FCC US Agent Agent Company Name: Typhur Inc. Agent Contact Name: Allen Fung Agent US Address: 2890 Zanker Rd, Suite 120, San Jose, CA 95134 Agent Email Address: [email protected] This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of Shenzhen Typhur Technology Co., Ltd (“the applicant”) for the above Grantee code. We are aware of the requirements and responsibilities of the applicant’s agent for service of process as outlined in the FCC section 2.911(d)(7) and Report and Order FCC 22-84 paragraph 63. Sincerely, ___ Allen Fung General Manager Typhur Inc.

Shenzhen Typhur Technology Co., Ltd Date: 04/19/2023 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 To whom it may concern: I, the undersigned, hereby authorize UL Verification Services Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Verification Services Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing UL Verification Services Inc. as our representative, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Signed by: Company Name: Shenzhen Typhur Technology Co., Ltd Contact Name: Wilson Huang Address: 22 Floor, Prince Plaza, 51 Taizi Road Shuiwan Community, Zhaoshang Street, Nanshan Shenzhen China Date: 04/19/2023

Shenzhen Typhur Technology Co., Ltd Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: 2A6RN-WCT1000 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Best Regards Company Name: Shenzhen Typhur Technology Co., Ltd Contact Name: Wilson Huang Address: 22 Floor, Prince Plaza, 51 Taizi Road Shuiwan Community, Zhaoshang Street, Nanshan Shenzhen China Date: 04/25/2023

Appendix I External Photographs Page 2 of 4 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. View of EUT-1 View of EUT-2 Page 3 of 4 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. View of EUT-3 View of EUT-4 Page 4 of 4 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. View of EUT-5

DATEREV.AnnotationDesign This document must not be copied without our written permission and the contents thereof must not be imparted to a third party nor be used for any unauthorized purpose. Contravention will be prosecuted. INK: 1 234 5678 D C B AA B C D 87654321 sousvide-铭牌贴纸 92.81mm 55.88mm Contains FCC ID: 2A6RN-T1000 FCC ID: 2A6RN-WCT1000 IC: 28517-WCT1000 Contains IC: 28517-T1000

Appendix II Internal Photographs Page 2 of 12 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-1 Internal View of EUT-2 Page 3 of 12 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-3 Internal View of EUT-4 Page 4 of 12 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-5 Internal View of EUT-6 Page 5 of 12 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-7 Internal View of EUT-8 Page 6 of 12 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-9 Internal View of EUT-10 Page 7 of 12 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-11 Internal View of EUT-12 Page 8 of 12 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-13 Internal View of EUT-14 Antenna Page 9 of 12 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-15 Internal View of EUT-16 Page 10 of 12 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-17 Internal View of EUT-18 Page 11 of 12 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-19 Internal View of EUT-20 Page 12 of 12 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Internal View of EUT-21

The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. FCC RF EXPOSURE CERTIFICATION TEST REPORT For Sous Vide MODEL NUMBER: SV03 FCC ID: 2A6RN-WCT1000 REPORT NUMBER: 4790790773-RF-2 ISSUE DATE: April 27, 2023 Prepared for Shenzhen Typhur Technology Co., Ltd 22 Floor, Prince Plaza, 51 Taizi Road Shuiwan Community, Zhaoshang Shenzhen China Prepared by UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch Building 10, Innovation Technology Park, No. 1, Li Bin Road, Song Shan Lake Hi- Tech Development Zone Dongguan, 523808, People’s Republic of China Tel: +86 769 22038881 Fax: +86 769 33244054 Website: www.ul.com REPORT NO.: 4790790773-RF-2 Page 2 of 9 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO.: 10-SL-F0019 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Revision History Rev. Issue Date Revisions Revised By V0 04/27/2023 Initial Issue REPORT NO.: 4790790773-RF-2 Page 3 of 9 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO.: 10-SL-F0019 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS .................................................................................... 4 2. TEST METHODOLOGY ........................................................................................................ 5 3. FACILITIES AND ACCREDITATION .................................................................................... 5 4. DESCRIPTION OF EUT ........................................................................................................ 6 5. REQUIREMENT .................................................................................................................... 7 REPORT NO.: 4790790773-RF-2 Page 4 of 9 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO.: 10-SL-F0019 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 1. ATTESTATION OF TEST RESULTS Applicant Information Company Name: Shenzhen Typhur Technology Co., Ltd Address: 22 Floor, Prince Plaza, 51 Taizi Road Shuiwan Community, Zhaoshang Shenzhen China Manufacturer Information Company Name: Shenzhen Typhur Technology Co., Ltd Address: 22 Floor, Prince Plaza, 51 Taizi Road Shuiwan Community, Zhaoshang Shenzhen China EUT Information EUT Name: Sous Vide Model: SV03 Sample Received Date: March 31, 2023 Sample Status: Normal Sample ID: 5940396 Date of Tested: April 14, 2023 ~ April 21, 2023 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC 47CFR§1.1307 PASS FCC 47CFR§1.1310 PASS FCC 47CFR§2.1093 PASS FCC 47CFR§2.1091 PASS Prepared By: Checked By: Denny Huang Kebo Zhang Senior Project Engineer Senior Project Engineer Approved By: Stephen Guo Operations Manager REPORT NO.: 4790790773-RF-2 Page 5 of 9 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO.: 10-SL-F0019 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 2. TEST METHODOLOGY The tests documented in this report were performed in accordance with FCC 47CFR§1.1307(b)(1), FCC 47CFR§1.1310, FCC 47CFR§2.1093, KDB 680106 D01 RF Exposure Wireless Charging App v03r01. 3. FACILITIES AND ACCREDITATION Accreditation Certificate A2LA (Certificate No.: 4102.01) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. has been assessed and proved to be in compliance with A2LA. FCC (FCC Designation No.: CN1187) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. Has been recognized to perform compliance testing on equipment subject to the Commission's Delcaration of Conformity (DoC) and Certification rules ISED (Company No.: 21320) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. has been registered and fully described in a report filed with ISED. The Company Number is 21320 and the test lab Conformity Assessment Body Identifier (CABID) is CN0046. VCCI (Registration No.: G-20019, R-20004, C-20012 and T-20011) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. has been assessed and proved to be in compliance with VCCI, the Membership No. is 3793. Facility Name: Chamber D, the VCCI registration No. is G-20019 and R-20004 Shielding Room B , the VCCI registration No. is C-20012 and T-20011 Note: All tests measurement facilities use to collect the measurement data are located at Building 10, Innovation Technology Park, Song Shan Lake Hi tech Development Zone, Dongguan, 523808, China REPORT NO.: 4790790773-RF-2 Page 6 of 9 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO.: 10-SL-F0019 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 4. DESCRIPTION OF EUT EUT Name Sous Vide Model SV03 Product Description Operation Frequency 111 ~ 205 kHz Rated Output Power 5 W Antenna type Coil Ratings AC 120 V, 60 Hz REPORT NO.: 4790790773-RF-2 Page 7 of 9 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO.: 10-SL-F0019 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 5. REQUIREMENT LIMIT Frequency Range (MHz) E-field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power D…

Text truncated - open the document above for the full version.

The results reported herein have been performed in accordance with the laboratory’s terms of accreditation. This report shall not be reproduced except in full without the written approval of the Laboratory. The results in this report apply to the test sample(s) mentioned above at the time of the testing period only and are not to be used to indicate applicability to other similar products. FCC 47 CFR PART 15 SUBPART C CERTIFICATION TEST REPORT For Sous Vide MODEL NUMBER: SV03 FCC ID: 2A6RN-WCT1000 REPORT NUMBER: 4790790773-RF-1 ISSUE DATE: April 27, 2023 Prepared for Shenzhen Typhur Technology Co., Ltd 22 Floor, Prince Plaza, 51 Taizi Road Shuiwan Community, Zhaoshang Shenzhen China Prepared by UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch Building 10, Innovation Technology Park, No. 1, Li Bin Road, Song Shan Lake Hi- Tech Development Zone Dongguan, 523808, People’s Republic of China Tel: +86 769 22038881 Fax: +86 769 33244054 Website: www.ul.com REPORT NO.: 4790790773-RF-1 Page 2 of 24 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO.: 10-SL-F0053 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Revision History Rev. Issue Date Revisions Revised By V0 04/27/2023 Initial Issue REPORT NO.: 4790790773-RF-1 Page 3 of 24 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO.: 10-SL-F0053 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. Summary of Test Results Description of Test Item Standard Results Radiated Emission Test FCC 15.209 PASS 20dB Bandwidth FCC 15.215 PASS AC Power Line Conducted Emission FCC Part 15.207 Pass Note 1: This test report is only published to and used by the applicant, and it is not for evidence purpose in China. Note 2: The measurement result for the sample received is <Pass> according to < CFR 47 FCC PART 15 SUBPART C > when <Accuracy Method> decision rule is applied REPORT NO.: 4790790773-RF-1 Page 4 of 24 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO.: 10-SL-F0053 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ...................................................................................... 5 2. TEST METHODOLOGY .......................................................................................................... 6 3. FACILITIES AND ACCREDITATION ...................................................................................... 6 4. CALIBRATION AND UNCERTAINTY ..................................................................................... 7 4.1. MEASURING INSTRUMENT CALIBRATION ............................................................ 7 4.2. MEASUREMENT UNCERTAINTY ............................................................................. 7 5. EQUIPMENT UNDER TEST .................................................................................................... 8 5.1. DESCRIPTION OF EUT ............................................................................................. 8 5.2. TEST MODE ............................................................................................................... 8 5.3. ACCESSORY ............................................................................................................. 9 5.4. MEASURING INSTRUMENT LIST ........................................................................... 10 6. 20dB BANDWIDTH TEST ..................................................................................................... 11 7. RADIATED EMISSION TEST ................................................................................................ 13 7.1. SPURIOUS EMISSIONS BELOW 30 MHz .............................................................. 17 7.2. SPURIOUS EMISSIONS 30 MHz ~ 1 GHz .............................................................. 20 8. AC POWER LINE CONDUCTED EMISSION ....................................................................... 22 REPORT NO.: 4790790773-RF-1 Page 5 of 24 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO.: 10-SL-F0053 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 1. ATTESTATION OF TEST RESULTS Applicant Information Company Name: Shenzhen Typhur Technology Co., Ltd Address: 22 Floor, Prince Plaza, 51 Taizi Road Shuiwan Community, Zhaoshang Shenzhen China Manufacturer Information Company Name: Shenzhen Typhur Technology Co., Ltd Address: 22 Floor, Prince Plaza, 51 Taizi Road Shuiwan Community, Zhaoshang Shenzhen China EUT Information EUT Name: Sous Vide Model: SV03 Sample Received Date: March 31, 2023 Sample Status: Normal Sample ID: 5940396 Date of Tested: April 14, 2023 ~ April 21, 2023 Prepared By: Checked By: Denny Huang Kebo Zhang Senior Project Engineer Senior Project Engineer Approved By: Stephen Guo Operations Manager APPLICABLE STANDARDS STANDARD TEST RESULTS CFR 47 FCC PART 15 SUBPART C PASS REPORT NO.: 4790790773-RF-1 Page 6 of 24 UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch FORM NO.: 10-SL-F0053 This report shall not be reproduced except in full, without the written approval of UL Verification Services (Guangzhou) Co., Ltd, Song Shan Lake Branch. 2. TEST METHODOLOGY All tests were performed in accordance with the standard FCC CFR 47 Part 2, KDB 414788 D01 Radiated Test Site v01r01, CFR 47 FCC Part 15, ANSI C63.10-2013. 3. FACILITIES AND ACCREDITATION Accreditation Certificate A2LA (Certificate No.: 4102.01) UL Verification Services (Guangzhou) Co., Ltd. Song Shan Lake Branch. has been assessed and proved to be in complianc…

Text truncated - open the document above for the full version.

Antenna type: coil Antenna gain:0 dBi

Appendix III Setup Photographs RADIATED EMISSIONS MEASUREMENT SETUP (30MHz ~ 1 GHz) POWERLINE CONDUCTED EMISSIONS MEASUREMENT SETUP RADIATED EMISSIONS MEASUREMENT SETUP (Below 30MHz) E-FILED AND H-FILED STRENGTH MEASUREMENT SETUP-1 E-FILED AND H-FILED STRENGTH MEASUREMENT SETUP-2 E-FILED AND H-FILED STRENGTH MEASUREMENT SETUP-3 E-FILED AND H-FILED STRENGTH MEASUREMENT SETUP-4 …

Text truncated - open the document above for the full version.