2A6T2-X98HPROSmart TV BOX

Connection Interface Package Contents The Screen CastingMulti-screen Interaction Installation Steps Key Features Smart Phone Tablet PC TV Router How to use: After your device ( s ) and TV Box are connected to the same network, the logo will show up in the related applications of your device ( s ). Click the and share the photos, music and videos on T V. Digital Display Device x1 USBUSB USB CARD Allwinner H618 CPU: Quad-core ARM Cortex A53 processor GPU: Mali G31, supports OpenGL ES 1.0 / 2.0 / 3.2 , Vulkan 1.1, OpenCL 2.0. 100/1000M Ethernet, 802.11b/g/n/ac/ax 2.4G/5G WiFi6 Bluetooth 5.X. Android 12 OS,OTA upgrade support. Power Adapter x1HD Cable x1 Network Cable Power amplifier OPTICAL Cable TV Power Line Connect the TV Box with the power supply . Connect the TV Box to the TV with an HD cable or AV cable. For a wired connection, plug in Ethernet cable from the TV Box to your modem or router. For wireless, choose your Wi-Fi network and input the Wi-Fi password. Introduction: The TV Box lets you play photos, music and videos from smart phone or tablet computer on TV. Preparation: Make sure your device ( s ) and TV Box are connected to the same network. Supports video decoding up to 4K 60fpsSupports multi-formats: H265 Main10 L5.1 up to 4K 60fps and 6K 30fps. Remote Control x1 Router HD IN HD OUT TV box /notebook AV cable HD Switch Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. The equipment complies with FCC Radiation exposure limit set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

FCC Software Configuration Control Declaration Rev1.1 SHENZHEN AMEDIA TECHNOLOGY CO., LTD FCC Software Configuration Control Declaration Date: Nov. 25, 2022 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: Smart TV BOX / X98H Pro Regarding FCC Country Code Selection guidelines identified in KDB 594280. “All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified.” We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Date: 2022-11-25 Name: bo yang Title: manager Signature of applicant

SHENZHEN AMEDIA TECHNOLOGY CO., LTD Date: Nov. 25, 2022 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2A6T2-X98HPRO To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: bo yang Title: manager Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure FCC Software Security Requirements for UNII devices

Project No.: ZKT-221114L8450-01 FCC ID: 2A6T2-X98HPRO Project No.: ZKT-221114L8450-01 FCC ID: 2A6T2-X98HPRO Project No.: ZKT-221114L8450-01 FCC ID: 2A6T2-X98HPRO

Project No.: ZKT-221114L8450-01 FCC ID: 2A6T2-X98HPRO Label place X98H PRO RAM: 4G ROM: 32G DC:5.0V 2.0A VID: 55 01 8 20 FCC ID: 2A6T2-X98HPRO SIZE: 40*25mm

Project No.: ZKT-221114L8450-01 FCC ID: 2A6T2-X98HPRO Project No.: ZKT-221114L8450-01 FCC ID: 2A6T2-X98HPRO Project No.: ZKT-221114L8450-01 FCC ID: 2A6T2-X98HPRO BT&WIFI ANT

FCC ID: 2A6T2-X98HPRO RF Exposure Evaluation According to KDB447498D01 General RF Exposure Guidance v06 4.3.1. Standalone SAR test exclusion considerations Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Exclusion Threshold condition, listed below, is satisfied. Limits According to FCC Part1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in part1.1307(b) F= Frequency in MHz Friis Formula Friis transmission formula: Pd = (Pout*G)/(4* Pi * R 2) Where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm Pd id the limit of MPE . If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. Test Result of RF Exposure Evaluation 2.4G-W IFI/BT ANT1: 2.83dBi; 5G-W IFI ANT1: 3.03Bi; Antenna Gain: The maximum Gain measured in fully anechoic chamber is 1.0 in linear scale. Output Power Into Antenna & RF Exposure Evaluation Distance: Measurement Data The Max Conducted Peak Output Power data refer to report Report No.: ZKT-221114L8450-01& ZKT-221114L8450-02 & ZKT-221114L8450-033 & ZKT-221114L8450-04 BT/BLE-worst mode and channel: Test channel Output Power (dBm) Tune up tolerance (dBm) Maximum tune-up Power Calculated value (dBm) (mW) (BT) 8-DPSK Lowest channel 0.57 1±1 2 1.585 0.00060 (BLE)GFSK Lowest channel 0.62 1±1 2 1.585 0.00060 Limit: 1.0 EUT RF Exposure Evaluation simultaneous transmission operations According to 865664D02 2.2 d) 1): The sum of the ratios of the spatially averaged results to the applicable frequency dependent MPE limits : Simultaneous transmission mode The sum of the ratios SUM Limit BT+ BLE 0.00060+0.00060 0.0012 1.0 conclusion : 0.00089<1.0, So there is no sar requirement 2.4GWIFI worst mode and channel: Test channel Antenna Output Power (dBm) Tune up tolerance (dBm) 802.11b –2412MHz 16.77 16±1 802.11b –2437MHz 16.84 16±1 802.11b –2462MHz 16.76 16±1 Test worst case Maximum tune-up Power (dBm) Maximum tune-up Power (mW) Calculated value (mW/cm2) Limit (mW/cm2) 17 50.119 0.0191 1.0 Remark: 1)The Max Conducted Peak Output Power data refer to report Report No.: ZKT-221114L8450-03 2) Pd = (Pout*G)/(4* Pi * R 2 )=( 50.119*1.92)/(4*3.1415*20*20)= 0.0191, G=10 gain/10 =1.92 5GW IFI- worst mode and channel: U-NII-1 Mode Test channel Antenna Output Power (dBm) Tune up tolerance(dBm) Max Tune up (dBm) 802.11ax(HE20)-5180MHz 7.81 7±1 8 802.11ax(HE20)-5200MHz 7.68 7±1 8 802.11ax(HE20)-5240MHz 7.79 7±1 8 U-NII-3 Mode Test channel Antenna Output Power (dBm) Tune up tolerance(dBm) Max Tune up (dBm) 802.11ax(HE20)-5745MHz 4.79 5±1 6 802.11ax(HE20)-5785MHz 4.78 5±1 6 802.11ax(HE20)-5825MHz 4.39 5±1 6 Test worst case Maximum tune-up Power (dbm) Maximum tune-up Power (mW) Calculated value (mW/cm2) Limit (mW/cm2) 8 6.310 0.0025 1.0 Remark: 1)The Max Conducted Peak Output Power data refer to report Report No.: ZKT-221114L8450-04 2) Pd = (Pout*G)/(4* Pi * R 2 )=( 6.310 *2.01)/(4*3.1415*20*20)= 0.0025, G=10 gain/10 =2.01 EUT RF Exposure Evaluation simultaneous transmission operations According to 865664D02 2.2 d) 1): The sum of the ratios of the spatially averaged results to the applicable frequency dependent MPE limits : Simultaneous transmission mode The sum of the ratios SUM Limit BT+2.4G W IFI + 5G W IFI 0.0012+0.0191+0.0025 0.0228 1.0 conclusion : 0.0228 < 1.0, So there is no sar requirement NOTE:1. EUT wifi-5G module & wifi-2.4G module is more than 20cm away from the human body. 2.The sum of the ratios(2.4GW IFI + 5G W IFI+BT) is less than the limit value of 1.0, so there is no sar requirement.

Project No.: ZKT-221114L8450- 04 Page 1 of 102 FCC TEST REPORT FCC ID:2A6T2-X98HPRO Report Number............................... : ZKT-221114L8450-04 Date of Test................................................. : Nov. 02, 2022 -- Nov. 23, 2022 Date of issue .................................... : Nov. 23, 2022 Total number of pages ..................... : 102 Test Result ....................................... : PASS Testing Laboratory. ....................... : Shenzhen ZKT Technology Co., Ltd. Address .......................................... : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Applicant's name ......................... : SHENZHEN AMEDIA TECHNOLOGY CO., LTD Address .......................................... : Room 201, Building 2, Stech Park, Gaofeng community, Dalang Street, Longhua District, Shenzhen, China Manufacturer's name ................... : SHENZHEN AMEDIA TECHNOLOGY CO., LTD Address .......................................... : Room 201, Building 2, Stech Park, Gaofeng community, Dalang Street, Longhua District, Shenzhen, China Test specification: Standard .......................................... : FCC CFR Title 47 Part 15 Subpart E Section 15.407 ANSI C63.10:2013 Test procedure................................. : KDB 789033 D02 V01r02 Non-standard test method ............. : N/A Test Report Form No. .................... : TRF-EL-110_V0 Test Report Form(s) Originator .... : ZKT Testing Master TRF ................................... : Dated: 2020-01-06 This device described above has been tested by ZKT, and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. This report shall not be reproduced except in full, without the written approval of ZKT, this document may be altered or revised by ZKT, personal only, and shall be noted in the revision of the document. Product name ................................. : Smart TV BOX Trademark ...................................... : / Model/Type reference ...................... : X98H Pro Ratings ............................................ : DC 5V 2A from adapter Project No.: ZKT-221114L8450- 04 Page 2 of 102 Testing procedure and testing location: Testing Laboratory .................................. : Shenzhen ZKT Technology Co., Ltd. Address ..................................................... : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China Alen He Tested by (name + signature) .................... : Joe Liu Reviewer (name + signature)..................... : Lake Xie Approved (name + signature) .................... : Project No.: ZKT-221114L8450- 04 Page 3 of 102 Table of Contents Page 1. VERSION 5 2. SUMMARY OF TEST RESULTS 6 2.1 TEST FACILITY 7 2.2 MEASUREMENT UNCERTAINTY 7 3. GENERAL INFORMATION 8 3.1 GENERAL DESCRIPTION OF EUT 8 3.2 DESCRIPTION OF TEST MODES 9 3.3 BLOCK DIGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 9 3.4 DESCRIPTION OF SUPPORT UNITS(CONDUCTED MODE) 9 3.5EQUIPMENTS LIST FOR ALL TEST ITEMS 10 4. EMC EMISSION TEST 11 4.1 CONDUCTED EMISSION MEASUREMENT 11 4.1.1 POWER LINE CONDUCTED EMISSION LIMITS 11 4.1.2 TEST PROCEDURE 11 4.1.3 DEVIATION FROM TEST STANDARD 11 4.1.4 TEST SETUP 12 4.1.5 EUT OPERATING CONDITIONS 12 4.1.6 TEST RESULT 13 4.2 RADIATED EMISSION MEASUREMENT 15 4.2.1 RADIATED EMISSION LIMITS 15 4.2.2 TEST PROCEDURE 16 4.2.3 DEVIATION FROM TEST STANDARD 16 4.2.4 TEST SETUP 17 4.2.5 EUT OPERATING CONDITIONS 17 4.2.6 TEST RESULTS 18 5.POWER SPECTRAL DENSITY TEST 36 5.1 APPLIED PROCEDURES / LIMIT 36 5.2 TEST PROCEDURE 36 5.3 DEVIATION FROM STANDARD 36 5.4 TEST SETUP 36 5.5 EUT OPERATION CONDITIONS 37 5.6 TEST RESULT 37 6. -26 DB & 6DBM EMISSION BANDWIDTH 38 6.1 APPLIED PROCEDURES / LIMIT 38 6.2 TEST PROCEDURE 38 6.3 DEVIATION FROM STANDARD 38 6.4 TEST SETUP 38 6.5 EUT OPERATION CONDITIONS 38 Project No.: ZKT-221114L8450- 04 Page 4 of 102 6.6 TEST RESULT 38 7. OUTPUT POWER TEST 39 7.1 APPLIED PROCEDURES/LIMIT 39 7.2 DEVIATION FROM STANDARD 39 7.3 TEST SETUP 39 7.4 EUT OPERATION CONDITIONS 39 8. OUT OF BAND EDGE EMISSION 40 8.1 TEST PROCEDURE 40 8.2 DEVIATION FROM STANDARD 40 8.3 TEST SETUP 40 8.4 EUT OPERATION CONDITIONS 40 8.5 TEST RESULTS 40 9. FREQUENCY STABILITY MEASUREMENT 41 9.4 TEST RESULT 41 10.ANTENNA REQUIREMENT 42 11. APPENDIX1 43 11.1 POWER SPECTRAL DENSITY 43 11.2 -26 DB EMISSION BANDWIDTH 62 11.3 6DBM EMISSION BANDWIDTH 72 11.4 OUTPUT POWER 82 11.5 BAND EDGE EMISSION 83 11.6 FREQUENCY STABILITY 98 12. TEST SETUP PHOTO 102 13. EUT CONSTRUCTIONAL DETAILS 102 Project No.: ZKT-221114L8450- 04 Page 5 of 102 1. VERSION Report No. Version Description Approved ZKT-221114L8450-04 Rev.01 Initial issue of report Nov. 23, 2022 Project No.: ZKT-221114L8450- 04 Page 6 of 102 2. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: FCC Part15 (15.247) , Subpart C Standard Section Test Item Result Remark 15.203/15.247 (c) Antenna requirement PASS 15.207 AC Power Line Conducted Emission PASS 15.407 (a) (b) Spurious Radiated Emissions and Band Edge PASS 15.407 (e) /15.403(i) 6 dB bandwidth, 26dB Emission Bandwidth& 99% Occupied Bandwidth PASS 15.407 (a) Power Spectral Density PASS 15.407 (a)(1)(2)(3) Maximum conducted output power PASS 15.407 (g) Frequency Stability PASS NOTE: (1)” N/A” denotes test is not applicable in this Test Report Project No.: ZKT-221114L8450- 04 Page 7 of 102 2.1 TEST FACILITY Shenzhen ZKT Technology Co., Ltd. Add. : 1/F, No. 101, Building B, No. 6, Tangwei Community Industrial Avenue, Fuhai Street, Bao'an District, Shenzhen, China FCC Test Firm Registration Number: 692225 Designation Number: CN1299 IC Registered No.: 27033 2.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ± U，where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of …

Text truncated - open the document above for the full version.

Project No.: ZKT-221114L8450- 04 Page 62 of 102 11.2 -26 DB EMISSION BANDWIDTH Condition Antenna Modulation Frequency(MHz) -26dB_Emission_Bandwidth(MHz) NVNT ANT1 802.11a 5180.00 25.34 NVNT ANT1 802.11a 5200.00 25.07 NVNT ANT1 802.11a 5240.00 25.87 NVNT ANT1 802.11n(HT20) 5180.00 28.68 NVNT ANT1 802.11n(HT20) 5200.00 27.96 NVNT ANT1 802.11n(HT20) 5240.00 26.21 NVNT ANT1 802.11ac(VHT20) 5180.00 36.11 NVNT ANT1 802.11ac(VHT20) 5200.00 35.76 NVNT ANT1 802.11ac(VHT20) 5240.00 35.86 NVNT ANT1 802.11ax(HE20) 5180.00 27.53 NVNT ANT1 802.11ax(HE20) 5200.00 24.69 NVNT ANT1 802.11ax(HE20) 5240.00 25.88 NVNT ANT1 802.11n(HT40) 5190.00 41.55 NVNT ANT1 802.11n(HT40) 5230.00 41.92 NVNT ANT1 802.11ac(VHT40) 5190.00 43.16 NVNT ANT1 802.11ac(VHT40) 5230.00 43.15 NVNT ANT1 802.11ax(HE40) 5190.00 45.92 NVNT ANT1 802.11ax(HE40) 5230.00 39.96 -26dB_and_99%_Emission_Bandwidth_5_2GWiFi_NVNT_ANT1_802_11a_5180_20M -26dB_and_99%_Emission_Bandwidth_5_2GWiFi_NVNT_ANT1_802_11a_5200_20M Project No.: ZKT-221114L8450- 04 Page 63 of 102 -26dB_and_99%_Emission_Bandwidth_5_2GWiFi_NVNT_ANT1_802_11a_5240_20M -26dB_and_99%_Emission_Bandwidth_5_2GWiFi_NVNT_ANT1_802_11n(HT20)_5180_20M Project No.: ZKT-221114L8450- 04 Page 64 of 102 -26dB_and_99%_Emission_Bandwidth_5_2GWiFi_NVNT_ANT1_802_11n(HT20)_5200_20M -26dB_and_99%_Emission_Bandwidth_5_2GWiFi_NVNT_ANT1_802_11n(HT20)_5240_20M Project No.: ZKT-221114L8450- 04 Page 65 of 102 -26dB_and_99%_Emission_Bandwidth_5_2GWiFi_NVNT_ANT1_802_11ac(VHT20)_5180_20M -26dB_and_99%_Emission_Bandwidth_5_2GWiFi_NVNT_ANT1_802_11ac(VHT20)_5200_20M Project No.: ZKT-221114L8450- 04 Page 66 of 102 -26dB_and_99%_Emission_Bandwidth_5_2GWiFi_NVNT_ANT1_802_11ac(VHT20)_5240_20M -26dB_and_99%_Emission_Bandwidth_5_2GWiFi_NVNT_ANT1_802_11ax(HE20)_5180_20M Project No.: ZKT-221114L8450- 04 Page 67 of 102 -26dB_and_99%_Emission_Bandwidth_5_2GWiFi_NVNT_ANT1_802_11ax(HE20)_5200_20M -26dB_and_99%_Emission_Bandwidth_5_2GWiFi_NVNT_ANT1_802_11ax(HE20)_5240_20M Project No.: ZKT-221114L8450- 04 Page 68 of 102 -26dB_and_99%_Emission_Bandwidth_5_2GWiFi_NVNT_ANT1_802_11n(HT40)_5190_40M -26dB_and_99%_Emission_Bandwidth_5_2GWiFi_NVNT_ANT1_802_11n(HT40)_5230_40M Project No.: ZKT-221114L8450- 04 Page 69 of 102 -26dB_and_99%_Emission_Bandwidth_5_2GWiFi_NVNT_ANT1_802_11ac(VHT40)_5190_40M -26dB_and_99%_Emission_Bandwidth_5_2GWiFi_NVNT_ANT1_802_11ac(VHT40)_5230_40M Project No.: ZKT-221114L8450- 04 Page 70 of 102 -26dB_and_99%_Emission_Bandwidth_5_2GWiFi_NVNT_ANT1_802_11ax(HE40)_5190_40M -26dB_and_99%_Emission_Bandwidth_5_2GWiFi_NVNT_ANT1_802_11ax(HE40)_5230_40M Project No.: ZKT-221114L8450- 04 Page 71 of 102 Project No.: ZKT-221114L8450- 04 Page 72 of 102 11.3 6DBM EMISSION BANDWIDTH Condition Antenna Mode Frequency(MHz) -6dB_Emission_Bandwidth(MHz) Limit(MHz) Result NVNT ANT1 LCH 5745.00 16.38 0.500 Pass NVNT ANT1 MCH 5785.00 16.39 0.500 Pass NVNT ANT1 HCH 5825.00 16.36 0.500 Pass NVNT ANT1 LCH 5745.00 17.61 0.500 Pass NVNT ANT1 MCH 5785.00 17.62 0.500 Pass NVNT ANT1 HCH 5825.00 17.65 0.500 Pass NVNT ANT1 LCH 5745.00 17.69 0.500 Pass NVNT ANT1 MCH 5785.00 17.64 0.500 Pass NVNT ANT1 HCH 5825.00 17.70 0.500 Pass NVNT ANT1 LCH 5745.00 18.96 0.500 Pass NVNT ANT1 MCH 5785.00 18.98 0.500 Pass NVNT ANT1 HCH 5825.00 18.96 0.500 Pass NVNT ANT1 LCH 5755.00 36.37 0.500 Pass NVNT ANT1 HCH 5795.00 36.37 0.500 Pass NVNT ANT1 LCH 5755.00 36.47 0.500 Pass NVNT ANT1 HCH 5795.00 36.53 0.500 Pass NVNT ANT1 LCH 5755.00 37.91 0.500 Pass NVNT ANT1 HCH 5795.00 37.90 0.500 Pass -6dB_Emission_Bandwidth_5_8GWiFi_802_11a_5745_20M -6dB_Emission_Bandwidth_5_8GWiFi_802_11a_5785_20M Project No.: ZKT-221114L8450- 04 Page 73 of 102 -6dB_Emission_Bandwidth_5_8GWiFi_802_11a_5825_20M -6dB_Emission_Bandwidth_5_8GWiFi_802_11n(HT20)_5745_20M Project No.: ZKT-221114L8450- 04 Page 74 of 102 -6dB_Emission_Bandwidth_5_8GWiFi_802_11n(HT20)_5785_20M -6dB_Emission_Bandwidth_5_8GWiFi_802_11n(HT20)_5825_20M Project No.: ZKT-221114L8450- 04 Page 75 of 102 -6dB_Emission_Bandwidth_5_8GWiFi_802_11ac(VHT20)_5745_20M -6dB_Emission_Bandwidth_5_8GWiFi_802_11ac(VHT20)_5785_20M Project No.: ZKT-221114L8450- 04 Page 76 of 102 -6dB_Emission_Bandwidth_5_8GWiFi_802_11ac(VHT20)_5825_20M -6dB_Emission_Bandwidth_5_8GWiFi_802_11ax(HE20)_5745_20M Project No.: ZKT-221114L8450- 04 Page 77 of 102 -6dB_Emission_Bandwidth_5_8GWiFi_802_11ax(HE20)_5785_20M -6dB_Emission_Bandwidth_5_8GWiFi_802_11ax(HE20)_5825_20M Project No.: ZKT-221114L8450- 04 Page 78 of 102 -6dB_Emission_Bandwidth_5_8GWiFi_802_11n(HT40)_5755_40M -6dB_Emission_Bandwidth_5_8GWiFi_802_11n(HT40)_5795_40M Project No.: ZKT-221114L8450- 04 Page 79 of 102 -6dB_Emission_Bandwidth_5_8GWiFi_802_11ac(VHT40)_5755_40M -6dB_Emission_Bandwidth_5_8GWiFi_802_11ac(VHT40)_5795_40M Project No.: ZKT-221114L8450- 04 Page 80 of 102 -6dB_Emission_Bandwidth_5_8GWiFi_802_11ax(HE40)_5755_40M -6dB_Emission_Bandwidth_5_8GWiFi_802_11ax(HE40)_5795_40M Project No.: ZKT-221114L8450- 04 Page 81 of 102 Project No.: ZKT-221114L8450- 04 Page 82 of 102 11.4 OUTPUT POWER Condition Antenna Modulation Frequency (MHz) Conducted Power(dBm) limit(dBm) Result NVNT ANT1 802.11a 5180.00 6.60 30 Pass NVNT ANT1 802.11a 5200.00 5.99 30 Pass NVNT ANT1 802.11a 5240.00 6.40 30 Pass NVNT ANT1 802.11n(HT20) 5180.00 6.13 30 Pass NVNT ANT1 802.11n(HT20) 5200.00 6.14 30 Pass NVNT ANT1 802.11n(HT20) 5240.00 6.34 30 Pass NVNT ANT1 802.11ac(VHT20) 5180.00 1.22 30 Pass NVNT ANT1 802.11ac(VHT20) 5200.00 1.44 30 Pass NVNT ANT1 802.11ac(VHT20) 5240.00 1.65 30 Pass NVNT ANT1 802.11ax(HE20) 5180.00 7.81 30 Pass NVNT ANT1 802.11ax(HE20) 5200.00 7.68 30 Pass NVNT ANT1 802.11ax(HE20) 5240.00 7.79 30 Pass NVNT ANT1 802.11n(HT40) 5190.00 6.10 30 Pass NVNT ANT1 802.11n(HT40) 5230.00 6.34 30 Pass NVNT ANT1 802.11ac(VHT40) 5190.00 2.89 30 Pass NVNT ANT1 802.11ac(VHT40) 5230.00 3.08 30 Pass NVNT ANT1 802.11ax(HE40) 5190.00 7.60 30 Pass NVNT ANT1 802.11ax(HE40) 5230.00 7.48 30 Pass Condition Antenna Modulation Frequency (MHz) Conducted Power(dBm) limit(dBm) Result NVNT ANT1 802.11a 5745.00 3.16 30 Pass NVNT A…

Text truncated - open the document above for the full version.

TEL：+86 0755-23073599FAX：+86 0755-23097189E-mail:[email protected] Shenzhen yunding communication electronics co., ltd SHENZHEN 客户 : 品 名 规 格 DESCRIPTION: 料号 PART NO.： 客 户 料 号 CUS PART NO. ： 日期 D A T E： 工 程 ENGINEERING DEPARTMENT 品 保 Q C DEPARTMENT 业 务 SALES DEPARTMENT 吴淑仪刘丽王洪涛 客户承认签章 工 程 ENGINEERING DEPARTMENT 品 保 Q C DEPARTMENT 采 购 PURCHASING DEPARTMENT 联系电话：0755 23073599 15017941162 ж 承认书一式三份，惠蒙贵司承认签章 ж Approval in duplicate, please signed by your company. 承認書 BM805 Shrapnel antenna-WIFI2.4/5G 2020.4.15 APPRO VAL SHENZHEN AMEDIA TECHNOLOGY CO., LTD TEL：+86 0755-23073599FAX：+86 0755-23097189E-mail:[email protected] 1. 测试项目与设备 测试项目设备 1. S11参数 （S-parameter） 1.回波损耗 （Return Loss） 2.电压驻波比（VSWR） 网络分析仪: Agilent E5071B HP 8753D 2.有源测试 （Active） 1.发射功率 （TRP） 2.接收灵敏度（TIS） 1.暗室：ETS 7x4x3 m (3D) Chamber ETS 5x3x3 m (3D) Chamber 2.综合测试仪: Agilent 8960 E5515B ×2 StarPoint SP6011 3.无源测试 （Passive） 1.天线增益 （Gain）2.天线效 率 （Efficiency） 1.暗室：ETS 7x4x3 m (3D) Chamber ETS 5x3x3 m (3D) Chamber 2.网络分析仪：Agilent E5071B HP 8753D 2.Matching circuit -WIFI antenna: TEL：+86 0755-23073599FAX：+86 0755-23097189E-mail:[email protected] 地址： 深圳市宝安区宝安大道 4315 号文浩商务大厦 A602 3. Antenna structure diagram: TEL：+86 0755-23073599FAX：+86 0755-23097189E-mail:[email protected] 深圳市云顶通讯电子有限公司 SHENZHEN 4.Network test chart: SWR TEL：+86 0755-23073599FAX：+86 0755-23097189E-mail:[email protected] SHENZHEN 5. Antenna efficiency and gain TEL：+86 0755-23073599FAX：+86 0755-23097189E-mail:[email protected] 地址： 深圳市宝安区宝安大道 4315 号文浩商务大厦 A602 电 性 能 指 标 Electrical Specifications 频率范围 2400~2500/5100~5800MHz Frequency Range 2400~2500/5100~5800MHz 电压驻波比 ≤2.0 VSWR ≤2.0 输入阻抗 50 ΩInput Impedance50 Ω 增益 2.83 DBI/3.03DBIGain3 DBI/3.03DBI 最大输入功率 50WMaximum Input Power50W 机 械 指 标 Mechanical Specifications 工作温度 -40°C~+85°C Working Temperature -40°C~+85°C 工作湿度 20~80%Working Humidity20~80%

Project No.: ZKT-221114L8450-01 FCC ID: 2A6T2-X98HPRO Project No.: ZKT-221114L8450-01 FCC ID: 2A6T2-X98HPRO