2A6X2-875LHandheld transmitter

June 9, 2026 Nemko North America, Inc. 303 River Road Ottawa ON K1V 1H2 Canada ATTN.: Reviewing Engineer Subject: Covered Equipment Certification Attestation Letter Applicant: TrellisWare Technologies FCC ID: The applicant certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section §2.903 of the FCC rules. This includes certifying that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current FCC Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. The applicant certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Applicant Signed: Signed: Mike Rudeen Printed name: Mike Rudeen Title: Project Engineer Company Name: TrellisWare Technologies Inc. 2A6X2-875L

U.S. Agent Designation for Service of Process - Certification Attestation Letter June 9, 2026 Nemko North America, Inc. 303 River Road Ottawa ON K1V 1H2 Canada ATTN.: Reviewing Engineer FCC ID: Applicant FRN: 0016791279 This letter serves as a formal designation, pursuant to §2.911(d)(7) of the FCC Rules, of the following U.S. Agent* for Service of Process for the equipment under application: U.S. Agent for Service of Process: • Company Name: TrellisWare Technologies Inc. • Physical U.S. Company Address: 10641 Scripps Summit Ct #100, San Diego, CA 92131, United States • Agent Name: Jonathan Penner • Agent Email Address: [email protected] • Agent FRN: 0016791279 The above listed designated agent hereby acknowledges and accepts the obligation for service of process on behalf of the applicant signed below. The applicant further acknowledges and accepts its obligation to maintain a U.S. Agent for Service of Process for a minimum period of one year following either: • Permanent termination of all marketing and importation activities within the U.S. for the applicable equipment by the grantee. • The conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever occurs later. Sincerely, Applicant Signed: Agent Signed: Signed: Mike Rudeen Signed: Printed name: Mike Rudeen Printed name: Jonathan Penner Title: Project Engineer Title: Lab Manager Company Name: TrellisWare Technologies Inc. Company Name: TrellisWare Technologies Inc. Date: June 9, 2026 Date: June 9, 2026 2A6X2-875L

Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification Appointment of Agent for FCC and ISED Certification Application Dear Director of Certification, This letter formally appoints Spencer Zhong of Nemko Canada, Inc. located at 303 River Road, Ottawa, Ontario, Canada K1V 1H2, as our authorized agent to represent us in the application process for equipment certification. We confirm that the submitted documents accurately depict the device or system seeking certification. Additionally, we guarantee that all units produced, imported, or marketed, as defined by FCC and ISED Canada regulations, will possess a label identical to the one submitted with this application. By signing below, we certify that neither our company nor any party involved in the application is subject to denial of federal benefits, including FCC benefits, as outlined in Section 5301 of the Anti-Drug Abuse Act of 1988 (21 U.S.C. §862) due to a conviction for possession or distribution of a controlled substance. Furthermore, no party involved in the application, as defined in 47 CFR 1.2002 (b), is subject to denial of federal benefits, including FCC benefits. We attest to the truth and accuracy of the information provided to the FCC to the best of our knowledge (47 CFR 2.911 (d)) and acknowledge our responsibilities as a grantee regarding certified equipment (47 CFR 2.909). In instances where our authorized agent signs the application for certification on our behalf, we understand that Nemko North America, Inc. remains solely responsible for adhering to the terms and conditions for certification as specified by Nemko Canada Inc. Sincerely, Dated: January 30, 2026 Agency agreement expiration date: January 30, 2027 *Up to 12 months Signed by: Mike Rudeen Print name: Mike Rudeen Title: Project Engineer Phone: (858) 753-1600 On behalf of: Company name: TrellisWare Technologies Inc.

June 17, 2026 Nemko North America, Inc. 303 River Road Ottawa, Ontario, Canada K1V 1H2 FCC ID: Pursuant to FCC 47 CFR 0.457(d)(1)(ii) and 0.459 and FCC guidance published in KDB 726920, we hereby request confidential treatment of information accompanying this application as outlined below. We request the exhibits selected below as long term confidential (LTC) be withheld from public view permanently: REQUEST FOR CONFIDENTIALITY - FCC Selection of exhibits for LTC - general Exhibit name ☒ Permanent (Long Term) Block Diagrams ☒ Permanent (Long Term) Operation Description / Theory of Operation ☒ Permanent (Long Term) Parts List & Placement / BOM ☒ Permanent (Long Term) Schematics ☒ Permanent (Long Term) Internal photos* ☒ Permanent (Long Term) User Guide** Selection of exhibits for LTC - specific 1 Exhibit name ☒ Permanent (Long Term) Tune-Up Procedure ☐ Permanent (Long Term) SDR 2 Software / Security Info The above information contains trade secrets and proprietary information not customarily released to the public. The public disclosure of this information might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Sincerely, Signed: Mike Rudeen Printed name: Mike Rudeen Title: Project Engineer Phone: 858-753-1600 Company Name: TrellisWare Technologies Inc. Address: 10641 Scripps Summit Ct #100, San Diego, CA 92131, United States 1 - Tune up procedure is applicable only for licensed equipment. 2 - The FCC rules require that any radio, in which the software is designed or expected to be modified by a party other than the manufacturer that would affect the operating parameters of frequency range, modulation type, maximum output power or other radio frequency parameters outside the range under which the transmitter has been approved in accordance with the FCC rules, must be certified as a software-defined radio (SDR). 2A6X2-875L

June 9, 2026 Nemko North America, Inc. 303 River Road, Ottawa, Ontario, Canada K1V 1H2 Attn: Director of Certification FCC ID: 2A6X2-875L Pursuant to FCC 47 CFR 0.457(d)(1)(ii) and 0.459 and FCC guidance published in KDB 726920, we hereby request confidential treatment of information accompanying this application as outlined below. We request the exhibits selected below as long term confidential (LTC) be withheld from public view permanently: Request for Special Confidentiality – FCC Selection 1 Exhibit name ☒ User’s Manual ☒ Internal Photos Our user manual contains proprietary technical content intended exclusively for professional technicians operating under a Non-Disclosure Agreement (NDA). Distribution or sale of the manual must be contingent upon the recipient’s agreement to an NDA that strictly prohibits the disclosure of its contents. Furthermore, the device’s internal circuitry and components are not accessible to end users and are designed to be serviced solely by authorized technicians under NDA. All product sales must be governed by an NDA that protects proprietary information, including internal photographs. A sample NDA is included with this application. Our company has made substantial investments in the development of this innovative product, which represents a first-of-its-kind solution in the industry. Public disclosure of the technical details would compromise our competitive edge and could result in significant financial harm. Safeguarding the confidentiality of our design is critical to protecting our intellectual property. The information provided includes trade secrets and proprietary data not customarily disclosed to the public. Unauthorized disclosure could adversely impact our business and provide competitors with an unfair advantage. Sincerely, Signed: Mike Rudeen Printed name: Mike Rudeen Title: Project Engineer Phone: 858-753-1600 Company Name: TrellisWare Technologies Inc. Address: 10641 Scripps Summit Ct #100, San Diego, CA 92131, United States 1 - These items require further information to be provided to TCB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and review section II, 3) regarding specific information (NDA) that must accompany these requests.

1 NON-DISCLOSURE AGREEMENT Non-Disclosure Agreement # CON-001344-N Parties and Points of Contact: Name: TrellisWare Technologies, Inc. (“TrellisWare”) Name: XYZ (“Company”) Address: 10641 Scripps Summit Court, Suite Address: 100 City/St/Zip: San Diego, CA 92131 Agreement POC: Email: Phone: PI POC: Email: Phone: City/St/Zip: Agreement POC: Email: Phone: PI POC: Email: Phone: THIS NON-DISCLOSURE AGREEMENT (the "Agreement") is made and entered into by and between TrellisWare and Company to protect certain proprietary and confidential information of TrellisWare or of Company which may be disclosed under this Agreement solely for the Purpose (as defined below). In consideration of the mutual promises contained herein and for other good and valuable consideration, the receipt and sufficiency of which are hereby acknowledged, TrellisWare and Company agree as follows: 1. THE PARTIES TrellisWare and Company shall each be referred to herein as a “Party” or collectively as the “Parties.” A Party disclosing information under this Agreement shall be referred to as the “Disclosing Party.” A Party receiving information under this Agreement shall be referred to as the “Receiving Party.” 2. PURPOSE (A) The purpose of this Agreement is to enable the Parties to exchange proprietary financial, business, and/or technical data (possibly including, but not limited to designs, processes, performance specifics and other sensitive data) relating to [insert purpose] to support discussions concerning an actual or contemplated business relationship between the Parties (hereinafter referred to as the “Purpose”). 3. PROPRIETARY INFORMATION (“Proprietary Information”) (A) For purposes of this Agreement, the term “Proprietary Information” shall mean all information disclosed hereunder by the Disclosing Party to the Receiving Party, which is marked as “Proprietary”, “Confidential” or a similar marking. Proprietary Information shall also include information disclosed orally or visually, provided: (i) the information is identified as confidential or proprietary at the time of disclosure, (ii) a written summary of the disclosed information is delivered by the Disclosing Party to the Receiving Party within twenty (20) calendar days after the initial disclosure, and (iii) the written summary is marked as “Proprietary”, “Confidential” or a similar marking. For the avoidance of doubt, during such twenty (20) day period, the Receiving Party shall treat all information disclosed orally or visually as Proprietary Information in accordance with the terms of this Agreement. (B) Notwithstanding the foregoing, Proprietary Information shall not include information which the Receiving Party can demonstrate by reasonable evidence: (i) is publicly available prior to the Effective Date (as defined below) or becomes publicly available after the Effective Date through no breach of this Agreement or other act or omission by the Receiving Party or any individual or entity to whom the Receiving Party discloses such information in accordance with the terms of this Agreement; (ii) is already in the possession of the Receiving Party on a non- confidential basis at the time of disclosure by the Disclosing Party; (iii) is obtained by the Receiving Party from a third party which, to the best of the Receiving Party's knowledge, was free to disclose REF0000031, Rev B Revision Date: 9/18/2019 TrellisWare Proprietary Information Page 1 of 6 2 such information without restriction, unless the Receiving Party is notified by the Disclosing Party of misappropriation by said third party promptly after the Disclosing Party knew of such misappropriation; (iv) is independently developed by or for the Receiving Party without use of or reference to the Disclosing Party’s Proprietary Information, as shown by documents and other competent evidence in the Receiving Party’s possession; or (v) is approved for release in writing by the Disclosing Party. (C) Notwithstanding anything to the contrary herein, if the Disclosing Party discloses any Proprietary Information hereunder that is subject to a security classification by the U.S. Government, the Disclosing Party shall identify such classification at the time of disclosure and the Parties agree to handle such Proprietary Information in accordance with applicable U.S. Government requirements. (D) Notwithstanding anything to the contrary herein and subject to the requirements and exceptions stated below, if the purpose of this Agreement encompasses the submission of a proposal to a third party, then a Receiving Party submitting such proposal may disclose any Proprietary Information disclosed to it under this Agreement to such third party to the extent that such Receiving Party includes the Proprietary Information in the contemplated proposal, with the prior written consent of the Disclosing Party. The Disclosing Party may constrain the use or disclosure of its Proprietary Information pursuant to this Section 3(D) by providing written instruction to the Receiving Party. Any such disclosure pursuant to this Section 3(D) shall require that the Proprietary Information be indicated as such with its original “Proprietary”, “Confidential” or similar markings, to the extent practical, and with any other restrictive legends necessary to preserve its confidentiality as specified by U.S. Government regulation or the regulations or procedures of any other customer, as applicable. Notwithstanding anything to the contrary herein or the termination of this Agreement, the Receiving Party may retain the Proprietary Information included in such proposal, as described in this Section 3(D), in accordance with its record keeping policies and subject to a continuing obligation to protect the Proprietary Information in accordance with Section 4 of this Agreement. 4. CONFIDENTIALITY OBLIGATIONS (A) Receiving Party Responsibilities. With respect to Proprietary Information transmitted hereunder, unless otherwise provided in this Agreement, the Rec…

Text truncated - open the document above for the full version.

FCC 15.203 Declaration Letter to Clarify the connector type Product: Modular Radio (Marketing name: TW-875, HVIN: ASY0750439) FCC ID: 2A6X2-875L Attestation Date: May 20, 2026 1. Applicability of Section 15.203 This device employs a standard female SMP connector that is externally accessible. Under normal consumer operation, Section 15.203 prohibits such user-accessible standard connectors. However, the professional-installation exemption in KDB 353028 D01 §II.A.2.c is invoked because: • The equipment is sold exclusively to trained personnel, military or authorized agencies, not to the general public. • Installation, calibration, and antenna attachment must be performed by trained professionals contracted by the licensee. • Users are explicitly prohibited from changing the antenna; the connector is only accessible by trained service personnel. 2. Professional Installation Justification Per KDB 353028 D01 guidance, justify as follows: 1. Controlled distribution o The radio module is not sold via retail or mail-order; it is issued exclusively through authorised channels to military or trained agency personnel. 2. Sophisticated installation requirements o Installation includes verifying field strength, configuring power levels, applying antenna- specific calibration, and ensuring RF exposure compliance in mission-specific configurations—tasks that require technical training and are not performed by end users. 3. Connector access limitation o Although externally located, the connector is ruggedized and access for user swap-out is prohibited by the user manual and physical design to prevent unauthorized antenna attachment. 3. Compliance Measures To meet KDB 353028 and §15.203: • Exhibit list of approved antennas including part numbers, vendor, type, maximum gain, feed-line specs, and matching cable length (only these antennas may be used). • Manual statement: “This device must be professionally installed. Unauthorized antenna attachment or connector access by end users is strictly prohibited.” 4. Grant Condition Statement (FCC Label/User Manual) The following verbiage is stated in the user manual: “This device must be professionally installed. Only approved antennas listed in this manual are permitted. End-users must not disconnect or replace the antenna connector.” Summary Table Requirement Compliance via Declaration FCC §15.203 standard connector Exempted via professional-installation justification KDB 353028 D01 guidance Met through controlled distribution, training requirements, connector access limitations Approved Antenna Listing required Exhibit included listing allowed antennas User/manual statement required Included clear prohibition on end-user antenna change Sincerely, Dated: June 9, 2026 Signed by: Print name: Mike Rudeen Mike Rudeen Title: Project Engineer Phone: (858) 753-1600 On behalf of: Company name: TrellisWare Technologies Inc.

External Photographs of the TrellisWare TW-875 Radio Marketing Name: TW-875 FCC ID: 2A6X2-875L HVIN: ASY075043

Label Location Marketing Name: TW-875 FCC ID: 2A6X2-875L HVIN: ASY0750439

© 2026 RF Exposure Lab, LLC This report shall not be reproduced except in full without the written approval of RF Exposure Lab, LLC. 802 N. Twin Oaks Valley Road, Suite 105 • San Marcos, CA 92069 • U.S.A. TEL (760) 471-2100 • FAX (760) 471-2121 http://www.rfexposurelab.com CERTIFICATE OF COMPLIANCE SAR EVALUATION TrellisWare Technologies, Inc. Dates of Test: May 15, 2026 10641 Scripps Summit Court, #100 Test Report Number: SAR.20260 518 San Diego, CA 92131 Revision B Lab Designation Number: US1195; Registration Number: 513032 This wireless mobile and/or portable device has been shown to be compliant for localized specific absorption rate (SAR) for controlled environment/occupational limits specified in ANSI/IEEE Std. C95.1-1992 and had been tested in accordance with the measurement procedures specified in KDB 447498 and KDB 643646 (See test report). I attest to the accuracy of the data. All measurements were performed by myself or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them. RF Exposure Lab, LLC certifies that no party to this application is subject to a denial of Federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Jay M. Moulton Vice President Testing Cert. # 2387.01 Contains FCC ID: 2A6X2-875L Model(s): TW-875 Hardware ID: ASY0750439 Test Sample: Engineering Unit Same as Production Serial Number: 308003 Equipment Type: Body Worn Radio Classification: Portable Transmitter Next to Body TX Frequency Range: 1390 – 1395 MHz; 1432 – 1435 MHz; 1695 – 1710 MHz Frequency Tolerance: ± 2.5 ppm Maximum RF Output: 1390 MHz – 30.0 dBm, 1435 MHz – 30.0 dBm, 1700 MHz – 30.0 dBm Conducted Signal Modulation: FM Antenna Type: External 1390 MHz, 1435 MHz, 1700 MHz Model TW-1157 Application Type: Certification FCC Rule Parts: Part 2, 27 KDB Test Methodology: KDB 447498 D01 v06, KDB 643646 v01r03 Max. Stand Alone SAR Value: 7.64 W/kg Reported Separation Distance: 0 mm Report Number: SAR.20260518 © 2026 RF Exposure Lab, LLC Page 2 of 82 This report shall not be reproduced except in full without the written approval of RF Exposure Lab, LLC. Table of Contents 1. Introduction ................................................................................................................................................ 4 SAR Definition [5] .......................................................................................................................................... 5 2. SAR Measurement Setup .......................................................................................................................... 6 Robotic System ............................................................................................................................................. 6 System Hardware .......................................................................................................................................... 6 System Electronics ........................................................................................................................................ 7 Probe Measurement System ......................................................................................................................... 7 3. Probe and Dipole Calibration ................................................................................................................... 14 4. Phantom & Simulating Tissue Specifications ........................................................................................... 15 Head & Body Simulating Mixture Characterization ....................................................................................... 15 5. ANSI/IEEE C95.1 – 1992 RF Exposure Limits [2] .................................................................................... 16 Uncontrolled Environment ............................................................................................................................ 16 Controlled Environment ............................................................................................................................... 16 6. Measurement Uncertainty ........................................................................................................................ 17 7. System Validation .................................................................................................................................... 18 Tissue Verification ....................................................................................................................................... 18 Test System Verification .............................................................................................................................. 18 8. SAR Test Data Summary ......................................................................................................................... 19 Procedures Used To Establish Test Signal .................................................................................................. 19 Device Test Condition .................................................................................................................................. 19 9. SAR Test Results .................................................................................................................................... 22 10. Test Equipment List ............................................................................................................................. 24 11. Conclusion ........................................................................................................................................... 25 12. References .......................................................................................................................................... 26 Appendix A – Sy…

Text truncated - open the document above for the full version.

Section 8 Testing data Test name Field strength of radiated spurious emissions Report reference ID: REP165759-1R3TRFWL Page 50 of 85 Figure 8.7-12: Radiated emissions spectral plot (3.5 GHz - 18 GHz) – Mid_1392.5MHz, 3.6MHz BW Table 8.7-12: Radiated emissions results Frequency (MHz) MaxPeak (dBμV/m) Limit (dBμV/m) Margin (dB) Meas. Time (ms) Bandwidth (kHz) Height (cm) Pol Azimuth (deg) Corr. (dB/m) 4179.077778 50.63 82.23 31.60 5000.0 1000.000 142.0 H 196.0 1.7 12369.994444 49.55 82.23 32.68 5000.0 1000.000 349.0 V 0.0 16.7 14426.550000 51.15 82.23 31.08 5000.0 1000.000 103.0 H 120.0 18.7 16616.461111 52.44 82.23 29.79 5000.0 1000.000 302.0 V 264.0 23.8 Notes: 1 Field strength (dB V/m) = receiver/spectrum analyzer value (dB V) + correction factor (dB) 2 Correction factors = antenna factor ACF (dB) + cable loss (dB) 3 Emissions that were continuously present for a minimum of 1 second and occurred more than once for every 15 seconds observation period were considered valid emissions. The maximum value of valid emissions has been recorded. Section 8 Testing data Test name Field strength of radiated spurious emissions Report reference ID: REP165759-1R3TRFWL Page 51 of 85 8.7.5 Test data – 1432-1435 MHz Radiated spurious emissions: Figure 8.7-13: Radiated emissions spectral plot (30 MHz - 1 GHz) - Low_1433MHz, 0.05MHz BW Table 8.7-13: Radiated emissions results Frequency (MHz) MaxPeak (dBμV/m) Limit (dBμV/m) Margin (dB) Meas. Time (ms) Bandwidth (kHz) Height (cm) Pol Azimuth (deg) Corr. (dB/m) 30.120000 29.38 84.38 55.00 5000.0 100.000 204.0 V 253.0 26.5 112.025000 29.22 84.38 55.16 5000.0 100.000 401.0 V 137.0 19.0 113.642500 29.49 84.38 54.89 5000.0 100.000 376.0 V 278.0 19.2 383.989167 31.29 84.38 53.09 5000.0 100.000 138.0 V 316.0 24.6 688.209167 35.49 84.38 48.89 5000.0 100.000 401.0 V 314.0 30.5 996.700833 39.98 84.38 44.40 5000.0 100.000 237.0 H 98.0 34.7 Notes: 1 Field strength (dB V/m) = receiver/spectrum analyzer value (dB V) + correction factor (dB) 2 Correction factors = antenna factor ACF (dB) + cable loss (dB) 3 Emissions that were continuously present for a minimum of 1 second and occurred more than once for every 15 seconds observation period were considered valid emissions. The maximum value of valid emissions has been recorded. Section 8 Testing data Test name Field strength of radiated spurious emissions Report reference ID: REP165759-1R3TRFWL Page 52 of 85 Figure 8.7-14: Radiated emissions spectral plot (1 GHz - 18 GHz) - Low_1433MHz, 0.05MHz BW Table 8.7-14: Radiated emissions results Frequency (MHz) MaxPeak (dBμV/m) Limit (dBμV/m) Margin (dB) Meas. Time (ms) Bandwidth (kHz) Height (cm) Pol Azimuth (deg) Corr. (dB/m) 2866.033333 53.47 82.23 28.76 100.0 1000.000 179.0 V 264.0 -2.5 4298.966667 62.85 82.23 19.38 100.0 1000.000 191.0 V 223.0 0.6 5749.833333 35.80 82.23 46.43 100.0 1000.000 401.0 H 170.0 4.1 7165.166667 49.52 82.23 32.71 100.0 1000.000 190.0 V 234.0 5.9 10534.400000 51.05 82.23 31.18 100.0 1000.000 277.0 V 274.0 11.4 16260.233333 53.18 82.23 29.05 100.0 1000.000 382.0 H 0.0 23.4 Notes: 1 Field strength (dB V/m) = receiver/spectrum analyzer value (dB V) + correction factor (dB) 2 Correction factors = antenna factor ACF (dB) + cable loss (dB) 3 Emissions that were continuously present for a minimum of 1 second and occurred more than once for every 15 seconds observation period were considered valid emissions. The maximum value of valid emissions has been recorded. Section 8 Testing data Test name Field strength of radiated spurious emissions Report reference ID: REP165759-1R3TRFWL Page 53 of 85 Figure 8.7-15: Radiated emissions spectral plot (30 MHz - 1 GHz) - Mid_1433.5MHz, 0.05MHz BW Table 8.7-15: Radiated emissions results Frequency (MHz) MaxPeak (dBμV/m) Limit (dBμV/m) Margin (dB) Meas. Time (ms) Bandwidth (kHz) Height (cm) Pol Azimuth (deg) Corr. (dB/m) 32.040000 28.94 84.38 55.44 5000.0 100.000 168.0 V 327.0 25.5 471.252500 29.55 84.38 54.83 5000.0 100.000 110.0 V 110.0 26.8 687.633333 34.94 84.38 49.44 5000.0 100.000 160.0 H 173.0 30.5 835.605000 39.13 84.38 45.25 5000.0 100.000 397.0 V 48.0 32.8 835.777500 37.91 84.38 46.47 5000.0 100.000 274.0 H 354.0 32.8 838.556667 37.98 84.38 46.40 5000.0 100.000 215.0 V 24.0 32.9 Notes: 1 Field strength (dB V/m) = receiver/spectrum analyzer value (dB V) + correction factor (dB) 2 Correction factors = antenna factor ACF (dB) + cable loss (dB) 3 Emissions that were continuously present for a minimum of 1 second and occurred more than once for every 15 seconds observation period were considered valid emissions. The maximum value of valid emissions has been recorded. Section 8 Testing data Test name Field strength of radiated spurious emissions Report reference ID: REP165759-1R3TRFWL Page 54 of 85 Figure 8.7-16: Radiated emissions spectral plot (1 GHz - 18 GHz) - Mid_1433.5MHz, 0.05MHz BW Table 8.7-16: Radiated emissions results Frequency (MHz) MaxPeak (dBμV/m) Limit (dBμV/m) Margin (dB) Meas. Time (ms) Bandwidth (kHz) Height (cm) Pol Azimuth (deg) Corr. (dB/m) 2867.000000 45.49 82.23 36.74 100.0 1000.000 180.0 V 298.0 -2.5 4300.666667 54.95 82.23 27.28 100.0 1000.000 182.0 V 223.0 0.6 5737.933333 36.54 82.23 45.69 100.0 1000.000 117.0 V 135.0 4.1 7167.600000 42.57 82.23 39.66 100.0 1000.000 324.0 H 153.0 5.9 10542.666667 50.97 82.23 31.26 100.0 1000.000 195.0 V 59.0 11.5 16299.366667 51.82 82.23 30.41 100.0 1000.000 152.0 H 190.0 23.4 Notes: 1 Field strength (dB V/m) = receiver/spectrum analyzer value (dB V) + correction factor (dB) 2 Correction factors = antenna factor ACF (dB) + cable loss (dB) 3 Emissions that were continuously present for a minimum of 1 second and occurred more than once for every 15 seconds observation…

Text truncated - open the document above for the full version.