2A7DX-BL8000Smart phone

Enjoy Smart Life BL8000 Series  English Screen Front Camera Receiver LED Spotlight  Screen Volume + Camera SIM Card Charger/Type-C Port NFC Speaker Volume - Power Key Fingerprint Scanner Microphone Flashlight Function Key  How to insert the card To make sure your smartphone be able to call, put the SIM card in the following order. Take out the card slot and place the Nano card or Nano card with the metal side facing down. Make sure the bevel angle is aligned with the bevel angle of the card slot and placed in the corresponding card slot. With the phone facing up, insert the card holder into the phone in the direction of the arrow. Insert the pad to pull out SIM card slot. 1 SIM 2SIM 1  Language switching settings How to boot How to send SMS, MMS Non-removable battery Press the power button for 3-5 seconds to boot Main menu--settings-system setting--language and input method Open the SMS app When writing a text message Select images, videos or other files you want to add, even You can take a new picture or video right away. Selecting or sending MMS - video Select New Information Enter a phone number or browse your contacts Select Edit Information and enter your text Send SMS Language and input method--language--language adding Select the language you need, the system will automatically jump back to the language interface Select the icon after the language bar and drag it to the first one. 2 4 3  When doing the waterproof test, the water depth is within 1.5 meters, and the mobile phone is immersed in water within 30 minutes; Tri-proof device performance test - the dustproof and waterproof level of this product has been certied as IP68 6 Anti-drop test: Height within 1m, and phone is falling itself. Pressure test: Keep the ground flat and do not bear pressure at a single point. SAR The maximum electromagnetic radiation absorption ratio (SAR) of this product is ≤2.0W/kg. In line with the requirements of the national standard GB 21288-2007. 5  Safety- In order to ensure safely using the product, you must strictly abide by the following rules 7 The phone should be at least 15 cm away from any medical implant or rhythm adjuster and never put the device in your coat pocket. Do not expose the device and other batteries together with the high temperatures or heat-generating equipment such as sunlight, heaters, microwave ovens, ovens or water heaters. Overheating of the battery can cause an explosion. When charging is complete or not charging, disconnect the charger from the device and unplug the charger from the power outlet. If the device is equipped with a non-removable battery, do not replace the battery yourself to avoid damaging the battery or device. Use of an unapproved or incompatible power source, charger or battery may cause fire, explosion or other hazards. Do not disassemble or reset the battery, insert other objects, immerse in water or other liquids to avoid battery leakage, overheating, fire or explosion. Do not drop, crush, scratch or puncture the battery to avoid subjecting the battery to excessive external pressure, resulting in internal short-circuit and overheating of the battery. The company does not bear the responsibility for accidents caused by non-standard related charging equipment. Although the equipment is durable, it is not indestructible. We still recommend avoiding knocking, throwing, crushing, perforating or bending this device. Hereby, Shenzhen DOKE Electronic Co., Ltd declares that this radio equipment type is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://ww- w.blackview.hk/ce/  Maintenance Thoroughly understand the maintenance of this mobile phone to use the mobile phone more safely and effectively, and extend the service life of the mobile phone as much as possible. Please follow the instructions in the manual to open the phone, disassemble the accessories, and do not try other methods. Please avoid falling, knocking or shaking your phone. Rough handling of the phone can cause the screen to rupture, damaging the internal circuit board and the delicate structure. Do not use chemical solvents or detergents to clean your phone. Wipe the phone case with a soft cotton cloth dampened with water or a mild soap. Clean the lens with a clean, dry, soft cloth. (Example: camera lens) and display. If you encounter an abnormal image such as a crash during use, the processing method is as follows: For a mobile phone that cannot remove the battery, please press and hold the power button for more than 12 seconds, the mobile phone will be forced to restart (unlock the phone when restarting) It can solve the general bug; for the mobile phone that can remove the battery, please remove the battery, then insert the battery and restart it to solve the bug. When the charger is not in use, please unplug it from the power outlet. Do not connect the battery that has been fully charged to the charger for a long time, as overcharging will shorten the battery life. 8 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turni…

Text truncated - open the document above for the full version.

DOKE COMMUNICATION (HK) LIMITED Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 8/28/24 U.S. Aqent Desiqnation DOKE COMMUNICATION (HK ) LIMITED acknowledges their consent for the following contact located in the United States to act as their agent for service of p「ocess for the equipment for which authorization is sought (FCC ID: 2A7DX-BL8000) Name and company of U.S. agent Physical U.S. address of agent: FRN of U.S. agent: Email address of U.S. agent AOCE Corporation Inc 6547 N Academy Bivd #2266, Colo「adoSprings, CO, 80918 United States 0033401381 [email protected] AOCE Corporation Inc. acknowledges their obligation to accept service of process on behalf of DOKE COMMUNICATION (HK) LIMITED. DOKE COMMUNICATION (HK) LIMITED with the FRN 0032533945 accepts its obligation to maintain an agent f or service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or ju dicial proceeding involving the equipment, whichever is later. By signing t his form, we confirm the above and that we are aware of the application requireme讯s listed under§ 2.911 ( d ) ( 7 ) . The information provided in this lette「 is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01 An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 3 0 days via the granting TCB Sincerely, 忆 P / 歹 �e 产一 Sig�atu「e Lynne Chen Manager DOKE COMMUNICATION (HK ) LIMITED J 。 气 勹 �"!. 三 Signature Johnson.wang PM AOCE Corporation Inc. 一， L， 三三一 ()tll-JeJ了f-l ＿诊 m二三「

Page 1 of 3 FCC ID: 2A7DX-BL8000 Page 2 of 3 FCC ID: 2A7DX-BL8000 Page 3 of 3 FCC ID: 2A7DX-BL8000

E-label will used Information can obtain as follow step: Setting about phone certification FCC ID: 2A7DX-BL8000

Page 1 of 6 FCC ID: 2A2NS-GY-Z17-1 Page 2 of 6 FCC ID: 2A2NS-GY-Z17-1 Page 3 of 6 FCC ID: 2A2NS-GY-Z17-1 . Page 4 of 6 FCC ID: 2A2NS-GY-Z17-1 Page 5 of 6 FCC ID: 2A2NS-GY-Z17-1 Page 6 of 6 FCC ID: 2A2NS-GY-Z17-1

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China TEST REPORT Report Reference No. ..................... : FCC ID ............................................ : CTA24072501501 2A7DX-BL8000 Compiled by ( position+printed name+signature).. : File administrators Zoey Cao Supervised by ( position+printed name+signature).. : Project Engineer Amy Wen Approved by ( position+printed name+signature).. : RF Manager Eric Wang Date of issue ..................................... : Aug. 28, 2024 Testing Laboratory Name .............. : Shenzhen CTA Testing Technology Co., Ltd. Address ............................................ : Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Applicant’s name ............................ : DOKE COMMUNICATION (HK) LIMITED Address ............................................ : 19H MAXGRAND PLAZA NO 3 TAI YAU STREET SAN PO KONG KL Test specification ........................... : Standard ........................................... : IEC 62209-2:2010; IEEE 1528:2013; FCC 47 CFR Part 2.1093; ANSI/IEEE C95.1:2005; Reference FCC KDB 447498; KDB 248227; KDB 616217; KDB 941225; KDB 865664 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ...................... : Smart phone Trade Mark ....................................... : Blackview Manufacturer .................................... : Shenzhen DOKE Electronic Co., Ltd Model/Type reference ....................... : BL8000 Listed Models .................................. : N/A Rating ............................................... : DC 3.87V From battery Result ............................................... : PASS Report No.: CTA24072501501 Page 2 of 265 T E S T R E P O R T Equipment under Test : Smart phone Model /Type : BL8000 Listed Models : N/A Applicant : DOKE COMMUNICATION (HK) LIMITED Address : 19H MAXGRAND PLAZA NO 3 TAI YAU STREET SAN PO KONG KL Manufacturer : Shenzhen DOKE Electronic Co., Ltd Address : 801, Building3, 7th Industrial Zone, Yulv Community, Yutang Road, Guangming District, Shenzhen, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA24072501501 Page 3 of 265 Contents 1 Statement of Compliance ............................................................................................................................. 6 2 General Information ..................................................................................................................................... 7 2.1 General Remarks ............................................................................................................................................. 7 2.2 Description of Equipment Under Test (EUT) ..................................................................................................... 7 2.3 Device Category and SAR Limits ..................................................................................................................... 8 2.4 Applied Standard .............................................................................................................................................. 8 2.5 Test Facility ....................................................................................................................................................... 9 2.6 Environment of Test Site ................................................................................................................................... 9 2.7 Test Configuration ............................................................................................................................................. 9 3 Specific Absorption Rate (SAR) ................................................................................................................. 10 3.1 Introduction ..................................................................................................................................................... 10 3.2 SAR Definition ................................................................................................................................................ 10 4 SAR Measurement System ........................................................................................................................ 11 4.1 E-Field Probe ................................................................................................................................................... 11 4.2 Data Acquisition Electronics (DAE) ................................................................................................................. 12 4.3 Robot .............................................................................................................................................................. 13 4.4 Measurement Server ...................................................................................................................................... 13 4.5 Phantom ......................................................................................................................................................... 14 4.6 Device Holder ................................................................................................................................................. 14 4.7 Data Storage and Evaluation ................…

Text truncated - open the document above for the full version.

Report No.: CTA24072501501 Page 215 of 265 Report No.: CTA24072501501 Page 216 of 265 Report No.: CTA24072501501 Page 217 of 265 Report No.: CTA24072501501 Page 218 of 265 Report No.: CTA24072501501 Page 219 of 265 Report No.: CTA24072501501 Page 220 of 265 Report No.: CTA24072501501 Page 221 of 265 Report No.: CTA24072501501 Page 222 of 265 Report No.: CTA24072501501 Page 223 of 265 Report No.: CTA24072501501 Page 224 of 265 Report No.: CTA24072501501 Page 225 of 265 Report No.: CTA24072501501 Page 226 of 265 Report No.: CTA24072501501 Page 227 of 265 Report No.: CTA24072501501 Page 228 of 265 Report No.: CTA24072501501 Page 229 of 265 Report No.: CTA24072501501 Page 230 of 265 Report No.: CTA24072501501 Page 231 of 265 Report No.: CTA24072501501 Page 232 of 265 Report No.: CTA24072501501 Page 233 of 265 Report No.: CTA24072501501 Page 234 of 265 Report No.: CTA24072501501 Page 235 of 265 Report No.: CTA24072501501 Page 236 of 265 Report No.: CTA24072501501 Page 237 of 265 Report No.: CTA24072501501 Page 238 of 265 Report No.: CTA24072501501 Page 239 of 265 Report No.: CTA24072501501 Page 240 of 265 Report No.: CTA24072501501 Page 241 of 265 Report No.: CTA24072501501 Page 242 of 265 Report No.: CTA24072501501 Page 243 of 265 Report No.: CTA24072501501 Page 244 of 265 Report No.: CTA24072501501 Page 245 of 265 Report No.: CTA24072501501 Page 246 of 265 Report No.: CTA24072501501 Page 247 of 265 Report No.: CTA24072501501 Page 248 of 265 Report No.: CTA24072501501 Page 249 of 265 Report No.: CTA24072501501 Page 250 of 265 Report No.: CTA24072501501 Page 251 of 265 Report No.: CTA24072501501 Page 252 of 265 Report No.: CTA24072501501 Page 253 of 265 Report No.: CTA24072501501 Page 254 of 265 Report No.: CTA24072501501 Page 255 of 265 Report No.: CTA24072501501 Page 256 of 265 Report No.: CTA24072501501 Page 257 of 265 Report No.: CTA24072501501 Page 258 of 265 Report No.: CTA24072501501 Page 259 of 265 Report No.: CTA24072501501 Page 260 of 265 Report No.: CTA24072501501 Page 261 of 265 Report No.: CTA24072501501 Page 262 of 265 Report No.: CTA24072501501 Page 263 of 265 Report No.: CTA24072501501 Page 264 of 265

Note: This device has been tested and found to comply with the standard(s) listed, this test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. This report shall not be reproduced except in full, without the written approval of Guangdong Asia Hongke Test Technology Limited. If there is a need to alter or revise this document, the right belongs to Guangdong Asia Hongke Test Technology Limited, and it should give a prior written notice of the revision document. This test report must not be used by the client to claim product endorsement. Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. TEST REPORT Product Name : Smart phone Brand Name : Blackview Model : BL8000 Series Model : N/A FCC ID : 2A7DX-BL8000 Applicant : DOKE COMMUNICATION (HK) LIMITED Address : 19H MAXGRAND PLAZA NO 3 TAI YAU STREET SAN PO KONG KL Manufacturer : Shenzhen DOKE Electronic Co., Ltd Address : 801, Building3, 7th Industrial Zone, Yulv Community, Yutang Road, Guangming District, Shenzhen, China Standard(s) : FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of Receipt : July 24, 2024 Date of Test : July 24, 2024~ Aug. 22, 2024 Issued Date : Aug. 23, 2024 Issued By: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Tel.: +86 0755-230967639 Fax.: +86 0755-230967639 Reviewed by: Approved by: Leon.yi Sean She Page 2 of 24 Report No.: AiTDG-240724011FW2 Report Revise Record Report Version Issued Date Notes M1 Aug. 23, 2024 Initial Release Page 3 of 24 Report No.: AiTDG-240724011FW2 Contents 1 TEST SUMMARY .................................................................................................................................................... 4 1.1 TEST STANDARDS ......................................................................................................................................................... 4 1.2 TEST SUMMARY ........................................................................................................................................................... 4 1.3 TEST FACILITY .............................................................................................................................................................. 5 1.4 MEASUREMENT UNCERTAINTY ........................................................................................................................................ 5 2 GENGENERAL INFORMATION ................................................................................................................................ 6 2.1 ENVIRONMENTAL CONDITIONS ........................................................................................................................................ 6 2.2 GENERAL DESCRIPTION OF EUT ...................................................................................................................................... 6 2.3 DESCRIPTION OF TEST MODES AND TEST FREQUENCY .......................................................................................................... 7 2.4 SPECIAL ACCESSORIES ................................................................................................................................................... 8 2.5 EQUIPMENT LIST FOR THE TEST ....................................................................................................................................... 8 3 TEST CONDITIONS AND RESULTS ........................................................................................................................... 9 3.1 CONDUCTED EMISSIONS TEST ......................................................................................................................................... 9 3.2 RADIATED EMISSIONS AND BAND EDGE .......................................................................................................................... 12 3.3 MAXIMUM PEAK CONDUCTED OUTPUT POWER ............................................................................................................... 19 3.4 POWER SPECTRAL DENSITY .......................................................................................................................................... 20 3.5 6DB BANDWIDTH ....................................................................................................................................................... 21 3.6 OUT-OF-BAND EMISSIONS ........................................................................................................................................... 22 3.7 ANTENNA REQUIREMENT ............................................................................................................................................. 23 4 TEST SETUP PHOTOGRAPHS OF EUT .................................................................................................................... 24 5 EXTERNAL PHOTOGRAPHS OF EUT ...................................................................................................................... 24 6 INTERNAL PHOTOGRAPHS OF EUT ...................................................................................................................... 24 Page 4 of 24 Report No.: AiTDG-240724011FW2 1 TEST SUMMARY 1.1 Test Standards The tests were performed according to following standards: FCC Rules Part 15.247: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz ANSI C63.10: 2013: American National Standard for Testing Unlicensed Wireless Devices KDB558074 D01 15.247 Meas Guidance v05r02: Guidance for Compliance Measurements on Digital Transmission System…

Text truncated - open the document above for the full version.

Note: This device has been tested and found to comply with the standard(s) listed, this test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. This report shall not be reproduced except in full, without the written approval of Guangdong Asia Hongke Test Technology Limited. If there is a need to alter or revise this document, the right belongs to Guangdong Asia Hongke Test Technology Limited, and it should give a prior written notice of the revision document. This test report must not be used by the client to claim product endorsement. Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China. TEST REPORT Product Name : Smart phone Brand Name : Blackview Model : BL8000 Series Model : N/A FCC ID : 2A7DX-BL8000 Applicant : DOKE COMMUNICATION (HK) LIMITED Address : 19H MAXGRAND PLAZA NO 3 TAI YAU STREET SAN PO KONG KL Manufacturer : Shenzhen DOKE Electronic Co., Ltd Address : 801, Building3, 7th Industrial Zone, Yulv Community, Yutang Road, Guangming District, Shenzhen, China Standard(s) : FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of Receipt : July 24, 2024 Date of Test : July 24, 2024~ Aug. 22, 2024 Issued Date : Aug. 23, 2024 Issued By: Guangdong Asia Hongke Test Technology Limited B1/F, Building 11, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China Tel.: +86 0755-230967639 Fax.: +86 0755-230967639 Reviewed by: Approved by: Leon.yi Sean She Page 2 of 25 Report No.: AiTDG-240724011FW3 Report Revise Record Report Version Issued Date Notes M1 Aug. 23, 2024 Initial Release Page 3 of 25 Report No.: AiTDG-240724011FW3 Contents 1 TEST SUMMARY .................................................................................................................................................... 4 1.1 TEST STANDARDS ......................................................................................................................................................... 4 1.2 TEST SUMMARY ........................................................................................................................................................... 4 1.3 TEST FACILITY .............................................................................................................................................................. 5 1.4 MEASUREMENT UNCERTAINTY ........................................................................................................................................ 5 2 GENGENERAL INFORMATION ................................................................................................................................ 6 2.1 ENVIRONMENTAL CONDITIONS ........................................................................................................................................ 6 2.2 GENERAL DESCRIPTION OF EUT ...................................................................................................................................... 6 2.3 DESCRIPTION OF TEST MODES AND TEST FREQUENCY .......................................................................................................... 7 2.4 SPECIAL ACCESSORIES ................................................................................................................................................... 8 2.5 EQUIPMENT LIST FOR THE TEST ....................................................................................................................................... 8 3 TEST CONDITIONS AND RESULTS ......................................................................................................................... 10 3.1 CONDUCTED EMISSIONS TEST ....................................................................................................................................... 10 3.2 RADIATED EMISSIONS AND BAND EDGE .......................................................................................................................... 13 3.3 MAXIMUM PEAK CONDUCTED OUTPUT POWER ............................................................................................................... 20 3.4 POWER SPECTRAL DENSITY .......................................................................................................................................... 21 3.5 6DB BANDWIDTH ....................................................................................................................................................... 22 3.6 OUT-OF-BAND EMISSIONS ........................................................................................................................................... 23 3.7 ANTENNA REQUIREMENT ............................................................................................................................................. 24 4 TEST SETUP PHOTOGRAPHS OF EUT .................................................................................................................... 25 5 EXTERNAL PHOTOGRAPHS OF EUT ...................................................................................................................... 25 6 INTERNAL PHOTOGRAPHS OF EUT ...................................................................................................................... 25 Page 4 of 25 Report No.: AiTDG-240724011FW3 1 TEST SUMMARY 1.1 Test Standards The tests were performed according to following standards: FCC Rules Part 15.247: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz ANSI C63.10: 2013: American National Standard for Testing Unlicensed Wireless Devices KDB558074 D01 15.247 Meas Guidance v05r02: Guidance for Compliance Measurements on Digital Transmission System, …

Text truncated - open the document above for the full version.

Page 1 of 21 Report No.: AiTDG-240724011FW2 1. Duty Cycle 1.1 Test Result 1.1.1 Ant1 Ant1 Mode TX Type Frequency (MHz) T_on (ms) Period (ms) Duty Cycle (%) Duty Cycle Correction Factor (dB) Max. DC Variation (%) 1M SISO 2402 2.127 2.499 85.11 0.70 0.01 2440 2.127 2.499 85.11 0.70 0.03 2480 2.128 2.500 85.12 0.70 0.03 Page 2 of 21 Report No.: AiTDG-240724011FW2 1.2 Test Graph 1.2.1 Ant1 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 3 of 21 Report No.: AiTDG-240724011FW2 1M_HCH_2480MHz_Ant1_NTNV Page 4 of 21 Report No.: AiTDG-240724011FW2 2. Bandwidth 2.1 Test Result 2.1.1 OBW Mode TX Type Frequency (MHz) ANT 99% Occupied Bandwidth (MHz) Verdict Result Limit 1M SISO 2402 1 1.032 / Pass 2440 1 1.030 / Pass 2480 1 1.032 / Pass 2.1.2 6dB BW Mode TX Type Frequency (MHz) ANT 6dB Bandwidth (MHz) Verdict Result Limit 1M SISO 2402 1 0.667 >=0.5 Pass 2440 1 0.670 >=0.5 Pass 2480 1 0.675 >=0.5 Pass Page 5 of 21 Report No.: AiTDG-240724011FW2 2.2 Test Graph 2.2.1 OBW 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 6 of 21 Report No.: AiTDG-240724011FW2 1M_HCH_2480MHz_Ant1_NTNV Page 7 of 21 Report No.: AiTDG-240724011FW2 2.2.2 6dB BW 1M_LCH_2402MHz_Ant1_NTNV 1M_MCH_2440MHz_Ant1_NTNV Page 8 of 21 Report No.: AiTDG-240724011FW2 1M_HCH_2480MHz_Ant1_NTNV Page 9 of 21 Report No.: AiTDG-240724011FW2 3. Maximum Conducted Output Power 3.1 Test Result 3.1.1 Power Mode TX Type Frequency (MHz) Maximum Peak Conducted Output Power (dBm) Verdict ANT1 Limit 1M SISO 2402 0.77 <=30 Pass 2440 2.66 <=30 Pass 2480 3.45 <=30 Pass Note1: Antenna Gain: Ant1: -1.20dBi; Page 10 of 21 Report No.: AiTDG…

Text truncated - open the document above for the full version.