2A7DX-BV4800-64Mobile Phone

Enjoy Smart Life BV4800 Series  English Screen Front Camera Receiver LED Spotlight  Volume + CameraSIM/ TF Card Type-C Port BV4800 3+64GB NFC Speaker Volume - Power Key BV4800 3+64GB Fingerprint Scanner Microphone Flashlight Function Key  How to insert the card To make sure your smartphone be able to call, put the SIM card in the following order. Take out the card slot and place the Nano card or TF card with the metal side facing down. Make sure the bevel angle is aligned with the bevel angle of the card slot and placed in the corresponding card slot. With the phone facing up, insert the card holder into the phone in the direction of the arrow. 2. Press the card pin into the side hole and then the card tray pops up and pull out it. 1. Open the SIM card plug. 1 1 2  Language switching settings How to boot How to send SMS, MMS Non-removable battery Press the power button for 3-5 seconds to boot Main menu--settings-system setting--language and input method Open the SMS app When writing a text message Select images, videos or other files you want to add, even You can take a new picture or video right away. Selecting or sending MMS - video Select New Information Enter a phone number or browse your contacts Select Edit Information and enter your text Send SMS Language and input method--language--language adding Select the language you need, the system will automatically jump back to the language interface Select the icon after the language bar and drag it to the first one. 2 4 3  When doing the waterproof test, the water depth is within 1.5 meters, and the mobile phone is immersed in water within 30 minutes; Tri-proof device performance test - the dustproof and waterproof level of this product has been certied as IP68 6 Anti-drop test: Height within 1m, and phone is falling itself. Pressure test: Keep the ground flat and do not bear pressure at a single point. SAR The maximum electromagnetic radiation absorption ratio (SAR) of this product is ≤2.0W/kg. In line with the requirements of the national standard GB 21288-2007. 5  Safety- In order to ensure safely using the product, you must strictly abide by the following rules The phone should be at least 15 cm away from any medical implant or rhythm adjuster and never put the device in your coat pocket. Do not expose the device and other batteries together with the high temperatures or heat-generating equipment such as sunlight, heaters, microwave ovens, ovens or water heaters. Overheating of the battery can cause an explosion. When charging is complete or not charging, disconnect the charger from the device and unplug the charger from the power outlet. If the device is equipped with a non-removable battery, do not replace the battery yourself to avoid damaging the battery or device. Use of an unapproved or incompatible power source, charger or battery may cause fire, explosion or other hazards. Do not disassemble or reset the battery, insert other objects, immerse in water or other liquids to avoid battery leakage, overheating, fire or explosion. Do not drop, crush, scratch or puncture the battery to avoid subjecting the battery to excessive external pressure, resulting in internal short-circuit and overheating of the battery. The company does not bear the responsibility for accidents caused by non-standard related charging equipment. 7 Although the equipment is durable, it is not indestructible. We still recommend avoiding knocking, throwing, crushing, perforating or bending this device. If you want to read the full CE accompliance, please check this link: http://www.blackview.hk/ce/  Maintenance Thoroughly understand the maintenance of this mobile phone to use the mobile phone more safely and effectively, and extend the service life of the mobile phone as much as possible. Please follow the instructions in the manual to open the phone, disassemble the accessories, and do not try other methods. Please avoid falling, knocking or shaking your phone. Rough handling of the phone can cause the screen to rupture, damaging the internal circuit board and the delicate structure. Do not use chemical solvents or detergents to clean your phone. Wipe the phone case with a soft cotton cloth dampened with water or a mild soap. Clean the lens with a clean, dry, soft cloth. (Example: camera lens) and display. If you encounter an abnormal image such as a crash during use, the processing method is as follows: For a mobile phone that cannot remove the battery, please press and hold the power button for more than 12 seconds, the mobile phone will be forced to restart (unlock the phone when restarting) It can solve the general bug; for the mobile phone that can remove the battery, please remove the battery, then insert the battery and restart it to solve the bug. When the charger is not in use, please unplug it from the power outlet. Do not connect the battery that has been fully charged to the charger for a long time, as overcharging will shorten the battery life. 8  Pусский экран фронтальная камера приёмник диодный фонарь  громкость + камера диодная вспышка SIM/ TF карта порт Type-C динамик громкость - кнопка питания BV4800 3+64GB сканер отпечатка пальца микрофон BV4800 3+64GB NFC функцион -альная кнопка  Как установить SIM-карту Чтобы убедиться, что ваш смартфон сможет звонить, положите SIM-карту в следующем порядке. 1 Вывезти карту слот и место нано карты или TF карты с металлической стороной вниз. Убедитесь, что угол наклона выравнивается по углу наклона слота для карты и помещается в соответствующий слот. При обращении телефона вверх Вставьте держатель карты в телефон в направлении стрелки. 1. извлеките лоток сим карт. 2. Нажмите на пин в боковом отверстии от сим-карты, а затем вытащите лоток сим-карт. 1 2  Переключение настроек языка Как включить Как отправлять SMS, MMS Несъемная батарея Press the power button for 3-5 seconds to boot Главное меню—Настройки—Системные настройки— Язык и метод ввода Откройте приложение SMS Когда набираете текстовое с…

Text truncated - open the document above for the full version.

DOKE COMMUNICATION (HK) LIMITED Section 2.911(d)(5)(i) Certification – Equipment Type Company name: DOKE COMMUNICATION (HK) LIMITED Address: RM 1902 EASEY COMM BLDG 253-261 HENNESSY ROAD WANCHAI HK CHINA Product Name: Mobile Phone FCC ID: 2A7DX-BV4800-64 Model(s): BV4800(3+64) 2.911(d)(5)(i) Equipment Type We, [DOKE COMMUNICATION (HK) LIMITED] (“the applicant”) certify that the equipment for which authorization is sought through certification is not: • Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules. • Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Lynne Chen Date: 2023-11-08 Title and Company name: Manager NOTE 1 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

DOKE COMMUNICATION (HK) LIMITED Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: DOKE COMMUNICATION (HK) LIMITED Address: RM 1902 EASEY COMM BLDG 253-261 HENNESSY ROAD WANCHAI HK CHINA Product Name: Mobile Phone FCC ID: 2A7DX-BV4800-64 Model(s): BV4800(3+64) 2.911(d)(5)(ii) Applicant filing We, [DOKE COMMUNICATION (HK) LIMITED ] (“the applicant”) certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Lynne Chen Date: 2023-11-08 Title and Company name: Manager NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List ”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.2

THREE STONES MEDIA LLC U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date:11/07/2023 Ref: Attestation Statement - Part2.911(d)(7) filing FCC ID：2A7DX-BV4800-64 DOKE COMMUNICATION (HK) LIMITED (“the applicant”) certifies that, as of the date of the filing of the application, THREE STONES MEDIA LLC(“the agent”) is our designated U.S. agent for service of process for the abovereference FCC ID. The applicant accepts to maintain an agent for service of process in the United States forno less than one year after either the grantee has permanently terminated all marketing and importation of theapplicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicialproceeding involving the equipment, whichever is later. The applicant further acknowledges it is ourresponsibility to inform the FCC whenever the agent information changes. THREE STONES MEDIA LLC ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: THREE STONES MEDIA LLC FRN: 0033401761 GC: 2A99E Address: 1200 Broadway St. APT 329, Los Angeles, CA90015 Contact Person: Sijie Zhang Tel: +1 267 909 3692 Applicant Company Name: DOKE COMMUNICATION (HK) LIMITED FRN: 0032533945 GC: 2A7DX Address: RM 1902 EASEY COMM BLDG 253-261 HENNESSY ROAD WANCHAI HK CHINA Contact Person: Lynne Chen Tel: 18825230528 Signature: Email: [email protected] Signature: Email: [email protected]

DOKE COMMUNICATION (HK) LIMITED FCC Software Configuration Control Declaration Date: November 8, 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: Mobile Phone / BV4800(3+64) Regarding FCC Country Code Selection guidelines identified in KDB 594280. “All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified.” We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Lynne Chen Date: 2023-11-08 Title: Manager Signature of applicant FCC Software Configuration Control Declaration Rev1.1(5G)

DOKE COMMUNICATION (HK) LIMITED Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2023-11-08 Subject; Request for Long Term Confidentiality FCC ID: 2A7DX-BV4800-64 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram BOM Operational Description Tune-up Procedurer software security requirement It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Lynne Chen Title: Manager

Letter of Authorization Company: DOKE COMMUNICATION (HK) LIMITED Address: RM 1902 EASEY COMM BLDG 253-261 HENNESSY ROAD WANCHAI HK CHINA Product Name: Mobile Phone Model Number: BV4800(3+64) ISED ID Number: 25768-BV480064 We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Lynne Chen Date: 2023-11-08 Title: Manager

Model: BV4800(3+64) External Model: BV4800(3+64) Model: BV4800(3+64) Model: BV4800(3+64)

Label&Location BV4800(3+64) Blackview Mobile Phone Model: BV4800(3+64) FCC ID: 2A7DX-BV4800-64 IC: 25768-BV480064

Model: BV4800(3+64) Internal Model: BV4800(3+64) Model: BV4800(3+64) Model: BV4800(3+64) Model: BV4800(3+64) Model: BV4800(3+64)

TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 1 of 136 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China SARTestReport For ApplicantName:DOKECOMMUNICATION(HK)LIMITED Address: RM1902EASEYCOMMBLDG253-261HENNESSYROAD WANCHAIHKCHINA EUTName:MobilePhone BrandName:Blackview ModelNumber:BV4800(3+64) IssuedBy CompanyName:BTFTestingLab(Shenzhen)Co.,Ltd. Address: F101,201and301,Building1,Block2,TantouIndustrialPark, TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen, China ReportNumber:BTF231007R00701 TestStandards: FCC47CFR§2.1093IEEE1528-2013IEEEC95.1-2019 KDB447498D04KDB865664D01KDB865664D02 KDB941225D01KDB941225D05KDB248227D01 KDB941225D06KDB648474D04KDB690783D01 FCCID:2A7DX-BV4800-64 TestConclusion:Pass TestDate:2023-10-31to2023-11-01 DateofIssue:2023-11-02 PreparedBy: MonicaZhou/ProjectEngineer Date:2023-11-02 ApprovedBy: Ryan.CJ/EMCManager Date:2023-11-02 Note:Allthetestresultsinthisreportonlyrelatedtothetestingsamples.Whichcanbeduplicatedcompletelyforthelegalusewithapprovalof applicant;itshallnotbereproducedexceptinfullwithoutthewrittenapprovalofBTFTestingLab(Shenzhen)Co.,Ltd.,Alltheobjectionsshouldbe raisedwithinthirtydaysfromthedateofissue.Tovalidatethereport,youcancontactus. TestReportNumber:BTF231007R00701 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 2 of 136 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China RevisionHistory VersionIssueDateRevisionsContent R_V02023-11-02Original Note:Oncetherevisionhasbeenmade,thenpreviousversionsreportsareinvalid. TestReportNumber:BTF231007R00701 TotalorpartialreproductionofthisdocumentwithoutpermissionoftheLaboratoryisnotallowed.Page 3 of 136 BTFTestingLab(Shenzhen)Co.,Ltd. F101,201and301,Building1,Block2,TantouIndustrialPark,TantouCommunity,SonggangStreet,Bao'anDistrict,Shenzhen,China TableofContents 1.Introduction...................................................................................................................................................................................................4 1.1IdentificationofTestingLaboratory.....................................................................................................................................................4 1.2IdentificationoftheResponsibleTestingLocation..............................................................................................................................4 1.3LaboratoryCondition...........................................................................................................................................................................4 1.4Announcement....................................................................................................................................................................................4 2.ProductInformation.......................................................................................................................................................................................5 2.1ApplicationInformation........................................................................................................................................................................5 2.2ManufacturerInformation....................................................................................................................................................................5 2.3FactoryInformation.............................................................................................................................................................................5 2.4GeneralDescriptionofEquipmentunderTest(EUT).........................................................................................................................5 2.5EquipmentunderTestAncillaryEquipment........................................................................................................................................5 2.6TechnicalInformation..........................................................................................................................................................................5 3.SummaryofTestResults..............................................................................................................................................................................7 3.1TestStandards....................................................................................................................................................................................7 3.2DeviceCategoryandSARLimit..........................................................................................................................................................7 3.3TestResultSummary..........................................................................................................................................................................8 3.4TestUncertainty..................................................................................................................................................................................9 4.MeasurementSystem.................................................................................................................................................................................11 4.1SpecificAbsorptionRate(SAR)Definition........................................................................................................................................11 4.2MVGSARSystem.............................................................................................................................................................................11 5.SystemVerification............................................................................................…

Text truncated - open the document above for the full version.

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 128 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Test Report For Applicant Name: DOKE COMMUNICATION (HK) LIMITED Address: RM 1902 EASEY COMM BLDG 253-261 HENNESSY ROAD WANCHAI HK CHINA EUT Name: Mobile Phone Brand Name: Blackview Model Number: BV4800 (3+64) Series Model Number: Refer to section 2 Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF231007R01604 Test Standards: 47 CFR Part 15E Test Conclusion: Pass FCC ID: 2A7DX-BV4800-64 Test Date: 2023-10-09 to 2023-10-31 Date of Issue: 2023-11-01 Prepared By: Chris Liu / Project Engineer Date: 2023-11-01 Approved By: Ryan.CJ / EMC Manager Date: 2023-11-01 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF231007R01604 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 128 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2023-11-01 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF231007R01604 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 128 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1 INTRODUCTION ......................................................................................................................................... 5 1.1 Identification of Testing Laboratory .............................................................................................. 5 1.2 Identification of the Responsible Testing Location ..................................................................... 5 1.3 Announcement ................................................................................................................................ 5 2 PRODUCT INFORMATION ......................................................................................................................... 6 2.1 Application Information .................................................................................................................. 6 2.2 Manufacturer Information ............................................................................................................... 6 2.3 Factory Information ........................................................................................................................ 6 2.4 General Description of Equipment under Test (EUT) .................................................................. 6 2.5 Technical Information ..................................................................................................................... 6 3 SUMMARY OF TEST RESULTS ................................................................................................................ 7 3.1 Test Standards ................................................................................................................................. 7 3.2 Uncertainty of Test .......................................................................................................................... 7 3.3 Summary of Test Result ................................................................................................................. 7 4 TEST CONFIGURATION ............................................................................................................................ 8 4.1 Test Equipment List ........................................................................................................................ 8 4.2 Test Auxiliary Equipment ............................................................................................................. 14 4.3 Test Modes ..................................................................................................................................... 14 5 EVALUATION RESULTS (EVALUATION) ................................................................................................ 15 5.1 Antenna requirement .................................................................................................................... 15 6 RADIO SPECTRUM MATTER TEST RESULTS (RF) .............................................................................. 15 6.1 Conducted Emission at AC power line ....................................................................................... 15 6.1.1 E.U.T. Operation: ................................................................................................................. 15 6.1.2 Test Setup Diagram: ............................................................................................................ 15 6.1.3 Test Data: ............................................................................................................................ 16 6.2 Duty Cycle ...................................................................................................................................... 18 6.2.1 E.U.T. Operation: ...........................................…

Text truncated - open the document above for the full version.

Shenzhen Xinbinuo Communication Technology Co. , Ltd. Antenna test report Customers：DK Project：DK066 Structure：Xiao Xiang-13316888409 RF： Liu Houxiong-17328763286 Date：2023-10-24 Shenzhen Xinbinuo Communication Technology Co. , Ltd. Antenna test report Report type： Version number：V1.0 Machine status：FCC IC Debug the frequency band： GSM:B2/B3/B5/B8 WCDMA:B2/B4/B5 FDD-LTE: B2/B3/B4/B5/B7/12/13/17/26/66 GPS and other satellite positioning antenna 2.4G/5.8G WIFI Bluetooth Shenzhen Xinbinuo Communication Technology Co. , Ltd. Antenna matching circuit PCB panel (main antenna) 0201Specifications ElementValuePCB位号 E1 NC L201 E2 0Ω C209 E3 10NH L202 E4 8.2PF C210 E5 NC C204 8.2PF 10NH NC 0欧姆 2NH 3.9NH 12NH 8.2PF 10NH 0Ω 3.9NH 2NH 12NH NC Shenzhen Xinbinuo Communication Technology Co. , Ltd. Antenna switch logic Antenna switch logic PCB panel (lower antenna)： DK066 Small panel main antenna switch logic RF1 0Ω （C205） GSM:900 RF2 2nH (C206) GSM:850 LTE-FDD:B5/7/26 WCDMA:B5 RF3 3.9nH (C201） GSM:1800/1900 LTE-FDD:B2/3/4/13/66 WCDMA:B2/4 RF4 12nH (C202） LTE-FDD:B12/17 Shenzhen Xinbinuo Communication Technology Co. , Ltd. Antenna test data Band chTRPTIS GSM 850 128 24.5 190 24.4 251 24.2 -101.5 EGSM 1 22.8 62 22.6 124 22.4 -94.5 DCS 512 23.3 698 23.7 885 24.4 -102.2 PCS 512 25.2 661 25.4 810 25.1 -101.5 Band chTRPTIS WCDMA Band2 10562 17.1 10700 17.3 10838 17.4 -103.5 WCDMA Band4 1538 15.2 1675 16.3 1738 16.5 -102.4 WCDMA Band5 4357 15.8 4410 16.2 4458 16.6 -102.6 Shenzhen Xinbinuo Communication Technology Co. , Ltd. Antenna test data BandchTRPTIS FDD- LTE (10M) B2 650 18.8 900 18.6 1150 18.6 -92.2 B3 1250 16.6 1575 17.4 1900 18.3 -93.1 B4 2000 17.1 2175 17.6 2350 18.5 -92.6 B5 2450 16.2 2525 16.3 2600 17 -91.2 B7 2800 15.4 3100 16.2 3400 16.9-92.3 BandchTRPTIS FDD- LTE (10M) B12 5060 16.3 5095 16.8 5130 16.5 -89.1 B13 5230 15.8 -88.8 B17 5780 16.5 5790 16.8 5800 17.3 -87.9 B26 8740 15.4 8865 16.2 8990 16.5 -89.3 B66 66536 16.3 66786 16.5 67036 17.8-91.8 Shenzhen Xinbinuo Communication Technology Co. , Ltd. Antenna test data WIFI OTA 2.4G Band Chann el TRPTIS b（11M） 113.16 613.37 1313.17-81.61 g（54M） 111.22 611.35 1311.28-70.32 n（MCS7） 110.77 610.43 1310.88-65.26 5G a（54M） 36 10.52 56 10.87 165 11.36-72.52 n（MCS7） 3610.3 5610.25 16510.71-67.15 Shenzhen Xinbinuo Communication Technology Co. , Ltd. Antenna test data NFC天线（主板）： NFCAntenna data LabelRead distance（mm) 卡140 卡235 卡328 卡415 Shenzhen Xinbinuo Communication Technology Co. , Ltd. Main antenna gain, passive data FreqEffiGain (MHz)(%)(dBi) 70016.61-5.73 71018.08-5.19 72021.25-4.53 73022.94-4.59 74024.9-4.22 75017.05-5.23 81020.04-3.5 82023.64-2.58 83024.81-2.62 84022.4-3.16 85019.12-4.01 91019.59-2.5 92020.64-2.86 93021.46-2.81 94022.01-3.35 95018.44-3.74 96017.4-4.28 FreqEffiGain (MHz)(%)(dBi) 171025.29-2.39 1730.229.23-1.75 1750.4129.6-1.85 1770.6132.4-1.39 1790.8232.7-1.53 1811.0232.5-1.55 1831.2232.5-1.55 1851.4328.82-1.88 1871.6326.21-2.24 1891.8427.44-1.91 1912.0423.73-2.4 1932.2422.48-2.28 1952.4525.56-1.61 1972.6522.2-2.65 1992.8622.35-2.8 2013.0623.99-2.5 2033.2621.99-3.27 2053.4722.18-3.46 2073.6724.28-3.06 2093.8824.8-2.95 2114.0825.79-2.55 FreqEffiGain (MHz)(%)(dBi) 2497.9630.4-1.3 2518.1631.1-0.88 2538.3630.49-0.88 2558.5727.1-1.75 2578.7727.64-1.56 2598.9821.83-2.9 2619.1820.55-3.43 2639.3820.92-2.93 2659.5916.54-3.82 2679.7919.56-2.77 270018.21-3.34 Shenzhen Xinbinuo Communication Technology Co. , Ltd. Three-in-one antenna gain, passive data FreqEffiGain (MHz)(%)(dBi) 1550 32.27-1.51 1555 32.21-1.14 1560 32.99-1.2 1565 33.93-1.18 1570 32.19-1.15 1575 31.01-1.36 1580 32.63-1.34 2400 36.851.78 2410 38.422.07 2420 37.041.59 2430 39.932.1 2440 42.342.31 2450 43.962.41 2460 45.692.83 2470 44.982.64 2480 45.142.83 2490 45.182.8 2500 43.532.74 FreqEffiGain (MHz)(%)(dBi) 5100 19.82-2.62 5200 26.48-0.5 5300 30.3-0.45 5400 36.360.53 5500 34.450.39 5600 31.880.28 5700 33.290.45 5800 33.660.68 5900 32.050.05 Shenzhen Xinbinuo Communication Technology Co. , Ltd. Diversity antenna gain, passive data FreqEffiGain (MHz)(%)(dBi) 7005.65-9.15 7107.71-7.65 7208.91-6.59 7309.48-6.35 7409.43-6.29 7509.86-6.11 81010.88-5.65 82010.78-6.11 83010.48-5.79 84010.76-5.6 85010.08-5.8 9109.04-6.17 9208.82-6.6 9309.15-6.46 9409.34-6.53 9509.46-6.45 9607.81-7.51 FreqEffiGain (MHz)(%)(dBi) 171017.43-2.15 1730.219.27-1.69 1750.4118.33-1.93 1770.6…

Text truncated - open the document above for the full version.