2A7DX-TAB60WIFITablet PC

DOKECOMMUNICATION(HK)LIMITED Familymodelsdeclarationletter. 2024-07-08 We Company:DOKECOMMUNICATION(HK)LIMITED Address:19HMAXGRANDPLAZANO3TAIYAUSTREETSANPOKONGKL Product:TabletPC ModelName:Tab60WiFi FamilyModel:TabA6Kids Exceptforthemodelname,allmodelshavethesamecircuitandRFmodule. Signature LynneChen/Manager Date/City:2024-07-08/KL Phone:18825230528 Fax:0755-6668278 E-mail:[email protected] LynneChen

(DOKECOMMUNICATION(HK)LIMITED) (2024.07.08) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(i)requestfor(FCCID:2A7DX-TAB60WIFI) [DOKECOMMUNICATION(HK)LIMITED](“theapplicant”)certifiesthattheequipment forwhichauthorizationissoughtisnot“covered”equipmentprohibitedfromreceiving anequipmentauthorizationpursuanttosection2.903oftheFCCrules. Sincerely, LynneChen LynneChen (DOKECOMMUNICATION(HK)LIMITED) (2024.07.08) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(i)requestfor(FCCID:2A7DX-TAB60WIFI) [DOKECOMMUNICATION(HK)LIMITED](“theapplicant”)certifiesthattheequipment forwhichauthorizationissoughtisnot“covered”equipmentprohibitedfromreceiving anequipmentauthorizationpursuanttosection2.903oftheFCCrules. Sincerely, LynneChen

THREE STONES MEDIA LLC U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: 7/9/2024 Ref: Attestation Statement – Part2.911(d)(7) filing FCC ID ：2A7DX-TAB60WIFI DOKE COMMUNICATION (HK) LIMITED (“the applicant”) certifies that, as of the date of the filing of the application, THREE STONES MEDIA LLC(“the agent”) is our designated U.S. agent for service of process for the abovereference FCC ID. The applicant accepts to maintain an agent for service of process in the United States forno less than one year after either the grantee has permanently terminated all marketing and importation of theapplicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicialproceeding involving the equipment, whichever is later. The applicant further acknowledges it is ourresponsibility to inform the FCC whenever the agent information changes. THR EE STONES MEDIA LLC ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: THREE STONES MEDIA LLC FRN: 0033401761 GC: 2A99E Address: 1200 Broadway St. APT 329, Los Angeles, CA90015 Signature: Contact Person: Sijie Zhang Tel: +1 267 909 3692 Email: [email protected] Applicant Company Name: DOKE COMMUNICATION (HK) LIMITED FRN: 0032533945 GC: 2A7DX Address: 19H MAXGRAND PLAZANO 3 TAI YAU STREETSAN PO KONG KL Signature: Contact Person: Lynne Chen Tel: 18825230528 Email: [email protected] Lynne Chen

DOKECOMMUNICATION(HK)LIMITED AgentAuthorizationLetter (2024-07-08) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:LETTEROFAGENTAUTHORIZATION ToWhomItMayConcern: We,theundersigned,herebyauthorize ShenzhenNTEKTestingTechnologyCo.,Ltd. 1/F,BuildingE,FendaScienceParkSanwei,Xixiang,Bao'anDistrict,Shenzhen, Guangdong,China Alex.li [email protected] toactonourbehalfinallmattersrelatingtoapplicationforequipmentauthorization, includingthesigningofalldocumentsrelatingtothesematters. Wealsoherebycertifythatnopartytotheapplicationauthorizedhereunderissubjecttothe denialofbenefits,includingFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuse Actof1988,21U.S.C.853(a). Thisagreementexpiresoneyearfromthecurrentdate. Sincerely, LynneChen/Manager Date/City:2024-07-08/KL Phone:18825230528 Fax:0755-6668278 E-mail:[email protected] LynneChen

DOKE COMMUNICATION (HK) LIMITED Long Term Confidentiality Request Letter (2024-07-08) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR Product: Tablet PC Model No.: Tab 60 WiFi, Tab A6 Kids FCC ID: 2A7DX-TAB60WIFI To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the  Schematic Diagram  Block Diagram  Operational Description  Parts List  Tune Up Procedure  PCB Layout and its Location  FCC Software Security Requirements for UNII devices Required to be submitted with this application be permanently withheld from public review. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Please contact me if there is any information you may need. Sincerely, Lynne Chen / Manager Date/City: 2024-07-08 / KL Phone: 18825230528 Fax: 0755-6668278 E-mail: [email protected]

DOKECOMMUNICATION(HK)LIMITED ShortTermConfidentialityRequestLetter (2024-07-08) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:ShortTermConfidentialityRequestFor Product:TabletPC ModelNo.:Tab60WiFi,TabA6Kids FCCID:2A7DX-TAB60WIFI ToWhomItMayConcern: Inaccordancewithsections0.457and0.459ofCFR47,<DOKECOMMUNICATION(HK) LIMITED>.requestsshort-termConfidentialityoffollowingsectionsofthisapplicationfora periodof180daysaftergrantisissued. Testsetupphotos Internalphotos Externalphotos User’smanual Thesedocumentscontaindetailedsystemandequipmentdescriptionsandrelated informationabouttheproduct,which<DOKECOMMUNICATION(HK)LIMITED> considerstobeproprietary,confidential,andacustomdesignandotherwise,wouldnot releasetothegeneralpublic.Sincethisdesignisabasisfromwhichfuturetechnological productswillevolve,<DOKECOMMUNICATION(HK)LIMITED>feelsthatthisinformation wouldbeofbenefittoitscompetitors,andthatthedisclosureoftheinformationinthese documentswouldgiveourcompetitorsanunfairadvantageinthemarket. Pleasecontactmeifthereisanyinformationyoumayneed. Sincerely, LynneChen/Manager Date/City:2024-07-08/KL Phone:18825230528 Fax:0755-6668278 E-mail:[email protected] LynneChen

1:1 MA 1 MM 机标 Tab 60 WiFi 深圳市多科电子有限公司 技术要求： 1. 材质：75# 哑银龙 2. 尺寸：40*35mm 3. 产品印刷清晰，无重影，切割无毛边 3. 材质需符合有害物质管制规范 4GB128GB Model: Tab 60 WiFi Color: Volcano Grey 801, Building3, 7th Industrial Zone, Yulv Community, FCC ID: 2A7DX-TAB60WIFI IC:25768-TAB60WIFI Shenzhen DOKE Electronic Co., Ltd Yutang Road, Guangming District, Shenzhen, China. Made in China T ADF 23 0001 210 R 210-205565 S/N5468634634644164131 4GB128GB Model: Tab 60 WiFi(EEA) Color: Volcano Grey 801, Building3, 7th Industrial Zone, Yulv Community, Yutang Road, Guangming District, Shenzhen, China. Made in China T R ADF 23 0001 210 210-205565 S/N5468634634644164131 4GB128GB Model: Tab 60 WiFi Color: Sunny Sky Blue 801, Building3, 7th Industrial Zone, Yulv Community, FCC ID: 2A7DX-TAB60WIFI IC:25768-TAB60WIFI Shenzhen DOKE Electronic Co., Ltd Yutang Road, Guangming District, Shenzhen, China. Made in China T R ADF 23 0001 210 210-205565 S/N5468634634644164131 4GB128GB Model: Tab 60 WiFi(EEA) Color: Sunny Sky Blue 801, Building3, 7th Industrial Zone, Yulv Community, Yutang Road, Guangming District, Shenzhen, China. Made in China T R ADF 23 0001 210 210-205565 S/N5468634634644164131 4GB128GB Model: Tab 60 WiFi Color: Algae Green 801, Building3, 7th Industrial Zone, Yulv Community, FCC ID: 2A7DX-TAB60WIFI IC:25768-TAB60WIFI Shenzhen DOKE Electronic Co., Ltd Yutang Road, Guangming District, Shenzhen, China. Made in China T R ADF 23 0001 210 210-205565 S/N5468634634644164131 4GB128GB Model: Tab 60 WiFi(EEA) Color: Algae Green 801, Building3, 7th Industrial Zone, Yulv Community, Yutang Road, Guangming District, Shenzhen, China. Made in China T R ADF 23 0001 210 210-205565 S/N5468634634644164131 非欧盟欧盟 FCC ID: 2A7DX-TAB60WIFI IC:25768-TAB60WIFI Shenzhen DOKE Electronic Co., Ltd FCC ID: 2A7DX-TAB60WIFI IC:25768-TAB60WIFI Shenzhen DOKE Electronic Co., Ltd FCC ID: 2A7DX-TAB60WIFI IC:25768-TAB60WIFI Shenzhen DOKE Electronic Co., Ltd

Page 1 of 74 Report No.: S24060401606001 FCC SAR EVALUATION REPORT In accordance with the requirements of FCC 47 CFR Part 2(2.1093) and IEEE Std 1528-2013 Product Name： Tablet PC Trademark： Blackview Model Name： Tab 60 WiFi Family Model： Tab A6 Kids Report No.： S24060401606001 FCC ID： 2A7DX-TAB60WIFI Prepared for DOKE COMMUNICATION (HK) LIMITED 19H MAXGRAND PLAZANO 3 TAI YAU STREETSAN PO KONG KL Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park Sanwei, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090 Website: http://www.ntek.org.cn Page 2 of 74 Report No.: S24060401606001 TEST RESULT CERTIFICATION Applicant’s name ................. : DOKE COMMUNICATION (HK) LIMITED. Address .................................. : 19H MAXGRAND PLAZANO 3 TAI YAU STREETSAN PO KONG KL Manufacturer's Name ..................................... : Shenzhen DOKE Electronic Co., Ltd Address .................................. : 801, Building3, 7th Industrial Zone, Yulv Community, Yutang Road, Guangming District, Shenzhen, China. Product description Product name ......................... : Tablet PC Trademark ............................ : Blackview Model Name ......................... : Tab 60 WiFi Family Model .......................... : Tab A6 Kids Standards .............................. : FCC 47 CFR Part 2(2.1093) IEEE Std 1528-2013 Published RF exposure KDB procedures This device described above has been tested by Shenzhen NTEK. In accordance with the measurement methods and procedures specified in IEEE Std 1528-2013 and KDB 865664 D01. Testing has shown that this device is capable of compliance with localized specific absorption rate (SAR) specified in FCC 47 CFR Part 2(2.1093). The test results in this report apply only to the tested sample of the stated device/equipment. Other similar device/equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. This report shall not be reproduced except in full, without the written approval of Shenzhen NTEK, this document may be altered or revised by Shenzhen NTEK, personal only, and shall be noted in the revision of the document. Test Sample Number ............................ S240604016006 Date of Test Date (s) of performance of tests ............. : Jun. 05, 2024 ~ Jun. 07, 2024 Date of Issue .......................................... : Jun. 28, 2024 Test Result .............................................. : Pass Prepared By : Reviewed By : Approved By : Jack Li (Project Engineer) Aaron Cheng (Supervisor) Alex Li (Manager) Page 3 of 74 Report No.: S24060401606001 ※ ※ Revision History ※ ※ REV. DESCRIPTION ISSUED DATE REMARK Rev.1.0 Initial Test Report Release Jun. 28, 2024 Jack Li Page 4 of 74 Report No.: S24060401606001 TABLE OF CONTENTS 1. General Information ............................................................................................ 6 1.1. RF exposure limits .................................................................................... 6 1.2. Statement of Compliance ........................................................................ 7 1.3. EUT Description ....................................................................................... 7 1.4. Test specification(s) .................................................................................. 8 1.5. Ambient Condition ................................................................................... 8 2. SAR Measurement System ................................................................................... 9 2.1. SATIMO SAR Measurement Set-up Diagram ............................................ 9 2.2. Robot ..................................................................................................... 10 2.3. E-Field Probe .......................................................................................... 11 2.3.1. E-Field Probe Calibration ................................................................. 11 2.4. SAM phantoms ...................................................................................... 12 2.4.1. Technical Data .................................................................................. 13 2.5. Device Holder ........................................................................................ 14 2.6. Test Equipment List ................................................................................ 15 3. SAR Measurement Procedures .......................................................................... 17 3.1. Power Reference ................................................................................... 17 3.2. Area scan & Zoom scan .......................................................................... 17 3.3. Description of interpolation/extrapolation scheme .............................. 19 3.4. Volumetric Scan ..................................................................................... 19 3.5. Power Drift ............................................................................................ 19 4. System Verification Procedure .......................................................................... 20 4.1. Tissue Verification ................................................................................. 20 4.1.1. Tissue Dielectric Parameter Check Results ...................................... 21 4.2. System Verification Procedure .............................................................. 22 4.2.1. System Verification Results .............................................................. 23 5. SAR Measurement variability and uncertainty .................................................. 24 5.1. SAR measurement variability ................................................................. 24 5.2. SAR measurement uncertainty .............................................................. 24 6. RF Exposure Positions .................................…

Text truncated - open the document above for the full version.

Antenna debugging report Customer: Duoke Project: DK086A Structure: Xiao Xiang-13316888409 RF: Long Yaobin 15874137313 Date: June 3, 2024 Shenzhen Xinbino Communication Technology Co., Ltd Shenzhen Xinbino Communication Technology Co., Ltd Antenna debugging report Report type: Version number: V3.0 Machine status: DVT trial production machine Debugging frequency band: 802.11a/b/g/n/ac/ax Shenzhen Xinbino Communication Technology Co., Ltd Antenna debugging data Antenna LOG MAG: Shenzhen Xinbino Communication Technology Co., Ltd Antenna debugging data Antenna SWR: Shenzhen Xinbino Communication Technology Co., Ltd Antenna test data Frequency（MHZ)Average Gain(dBi）Peak Gain(dBi） WIFI 2.4G/BT-4.81.9 -5.WIFI 5.2/5.8G91.3 Antenna gain： Antenna test data Shenzhen Xinbino Communication Technology Co., Ltd Antenna test data Shenzhen Xinbino Communication Technology Co., Ltd Antenna test data Shenzhen Xinbino Communication Technology Co., Ltd Antenna test data Shenzhen Xinbino Communication Technology Co., Ltd Antenna test data Shenzhen Xinbino Communication Technology Co., Ltd Antenna test data Shenzhen Xinbino Communication Technology Co., Ltd Antenna test data WIFI OTA 2.4G BandChannelTRPTIS b（11M） 113.6 612.8 1312.3-83.6 g（54M） 111.4 612.1 1311.9-71.1 n（MCS7） 112.2 613.1 1312.1-66.3 Haizhiyuan Memory: Shenzhen Xinbino Communication Technology Co., Ltd Antenna test data WIFI OTA 5G BandChannelTRPTIS a（54M） 3610.6 14911.3 16511.2-72.6 n（MCS7） 36 10.1 149 11.3 165 11.1-68.2 ac(MCS8） 3610.4 14911.8 16511.5-67.2 ax（MCS8) 3610.3 14911.5 16511.4-66.9 Haizhiyuan Memory: Shenzhen Xinbino Communication Technology Co., Ltd Environmental treatment As shown in the figure: The original motherboard environment is treated (within the yellow box in the left image below), and the screen ribbon cable is located below the foam, which cannot contact the metal on the back of the screen. Suggest changing the grounding point below the motherboard to the one shown in the red box on the right. Fully ground the motherboard to the metal area of the screen. Shenzhen Xinbino Communication Technology Co., Ltd Environmental treatment As shown in the figure, the back of the motherboard is first covered with insulation glue to shield the components, and the motherboard is pressed down to extend a conductive cloth from the shielding cover to the ground below the battery. Attach a conductive sponge with sufficient height to fully ground the laser engraved area on the back shell of the battery. (Note: The warping of the motherboard has a significant impact on sensitivity. It is necessary to fix the motherboard to prevent warping and fully ground it.) Shenzhen Xinbino Communication Technology Co., Ltd Environmental treatment As shown in the figure: Pull a large conductive cloth from the laser engraved area of the battery back shell to extend onto the plastic bracket. The height of the antenna exposed copper above the plastic bracket is sufficient for conductive foam and the extended conductive cloth to be fully grounded. Shenzhen Xinbino Communication Technology Co., Ltd Environmental treatment The rear shell metal has significant interference with the antenna. The antenna needs to be grounded at multiple points with the metal back shell. As shown in Figure 1-4: After attaching the antenna, first follow the 1 # image to apply a conductive cloth to the exposed copper area of the antenna groove and extend it to the screen metal for grounding. 2. The height of the conductive foam above the antenna groove area is sufficient to ground the metal back shell. 3. The antenna extends above the metal conductive cloth of the screen, and the height of the conductive foam is sufficient to ground the metal back shell. 4. The exposed copper area on both sides of the antenna should have a sufficient height for conductive foam to be grounded with the metal back shell. Shenzhen Xinbino Communication Technology Co., Ltd Antenna diagram Shenzhen Xinbino Communication Technology Co., Ltd

Report No.: S24060401605003 Version.1.3 Page 1 of 111 FCC RADIO TEST REPORT FCC ID: 2A7DX-TAB60WIFI Product: Tablet PC Trade Mark: Blackview Model No.: Tab 60 WiFi Family Model: Tab A6 Kids Report No.: S24060401605003 Issue Date: Jun 26. 2024 Prepared for DOKE COMMUNICATION (HK) LIMITED 19H MAXGRAND PLAZANO 3 TAI YAU STREETSAN PO KONG KL Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park Sanwei, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090 Website: http://www.ntek.org.cn Report No.: S24060401605003 Version.1.3 Page 2 of 111 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 4 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 5 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 6 3.1 FACILITIES..................................................................................................................................................... 6 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 6 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 6 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 7 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 9 6 SETUP OF EQUIPMENT UNDER TEST ......................................................................................................... 11 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ..................................................................... 11 6.2 SUPPORT EQUIPMENT ............................................................................................................................... 12 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 13 7 TEST REQUIREMENTS .................................................................................................................................... 15 7.1 CONDUCTED EMISSIONS TEST ............................................................................................................... 15 7.1.1 Applicable Standard .................................................................................................................................. 15 7.1.2 Conformance Limit ................................................................................................................................... 15 7.1.3 Measuring Instruments ............................................................................................................................. 15 7.1.4 Test Configuration .................................................................................................................................... 15 7.1.5 Test Procedure ........................................................................................................................................... 15 7.1.6 Test Results ................................................................................................................................................ 16 7.2 RADIATED SPURIOUS EMISSION ............................................................................................................ 18 7.2.1 Applicable Standard .................................................................................................................................. 18 7.2.2 Conformance Limit ................................................................................................................................... 18 7.2.3 Measuring Instruments ............................................................................................................................. 19 7.2.4 Test Configuration .................................................................................................................................... 19 7.2.5 Test Procedure ........................................................................................................................................... 20 7.2.6 Test Results ................................................................................................................................................ 21 7.3 6DB BANDWIDTH ....................................................................................................................................... 28 7.3.1 Applicable Standard .................................................................................................................................. 28 7.3.2 Conformance Limit ................................................................................................................................... 28 7.3.3 Measuring Instruments ............................................................................................................................. 28 7.3.4 Test Setup .................................................................................................................................................. 28 7.3.5 Test Procedure ........................................................................................................................................... 28 7.3.6 Test Results ................................................................................................................................................ 29 7.4 DUTY CYCLE ..........................................................................................................…

Text truncated - open the document above for the full version.

Report No.: S24060401605002 Version.1.3 Page 1 of 78 RADIO TEST REPORT FCC ID: 2A7DX-TAB60WIFI Product: Tablet PC Trade Mark: Blackview Model No.: Tab 60 WiFi Family Model: Tab A6 Kids Report No.: S24060401605002 Issue Date: Jun 26. 2024 Prepared for DOKE COMMUNICATION (HK) LIMITED 19H MAXGRAND PLAZANO 3 TAI YAU STREETSAN PO KONG KL Prepared by Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park Sanwei, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel. 400-800-6106, 0755-2320 0050, 0755-2320 0090 Website: http://www.ntek.org.cn Report No.: S24060401605002 Version.1.3 Page 2 of 78 TABLE OF CONTENTS 1 TEST RESULT CERTIFICATION ...................................................................................................................... 4 2 SUMMARY OF TEST RESULTS ......................................................................................................................... 5 3 FACILITIES AND ACCREDITATIONS ............................................................................................................. 6 3.1 FACILITIES..................................................................................................................................................... 6 3.2 LABORATORY ACCREDITATIONS AND LISTINGS ................................................................................. 6 3.3 MEASUREMENT UNCERTAINTY ............................................................................................................... 6 4 GENERAL DESCRIPTION OF EUT .................................................................................................................. 7 5 DESCRIPTION OF TEST MODES ..................................................................................................................... 9 6 SETUP OF EQUIPMENT UNDER TEST ......................................................................................................... 10 6.1 BLOCK DIAGRAM CONFIGURATION OF TEST SYSTEM ..................................................................... 10 6.2 SUPPORT EQUIPMENT ............................................................................................................................... 11 6.3 EQUIPMENTS LIST FOR ALL TEST ITEMS .............................................................................................. 12 7 TEST REQUIREMENTS .................................................................................................................................... 14 7.1 CONDUCTED EMISSIONS TEST ............................................................................................................... 14 7.1.1 Applicable Standard .................................................................................................................................. 14 7.1.2 Conformance Limit ................................................................................................................................... 14 7.1.3 Measuring Instruments ............................................................................................................................. 14 7.1.4 Test Configuration .................................................................................................................................... 14 7.1.5 Test Procedure ........................................................................................................................................... 14 7.1.6 Test Results ................................................................................................................................................ 15 7.2 RADIATED SPURIOUS EMISSION ............................................................................................................ 17 7.2.1 Applicable Standard .................................................................................................................................. 17 7.2.2 Conformance Limit ................................................................................................................................... 17 7.2.3 Measuring Instruments ............................................................................................................................. 18 7.2.4 Test Configuration .................................................................................................................................... 18 7.2.5 Test Procedure ........................................................................................................................................... 19 7.2.6 Test Results ................................................................................................................................................ 20 7.3 6DB BANDWIDTH ....................................................................................................................................... 26 7.3.1 Applicable Standard .................................................................................................................................. 26 7.3.2 Conformance Limit ................................................................................................................................... 26 7.3.3 Measuring Instruments ............................................................................................................................. 26 7.3.4 Test Setup .................................................................................................................................................. 26 7.3.5 Test Procedure .............................................…

Text truncated - open the document above for the full version.