2A7IM-PG0001ProGrip

ShiftCam ProGrip GETTING STARTED ShiftCam - Getting Started draft 07.indd Spread 1 of 8 - Pages(16, 1)ShiftCam - Getting Started draft 07.indd Spread 1 of 8 - Pages(16, 1)6/4/21 10:40 AM6/4/21 10:40 AM Scan the QR Code to View ProGrip Product Tutorial Your Mobile Creati ve Journey Begins Here... Legal and CompliancePart III15 FCC Statement: Declarati on of Conformity with FCC Rules for Electromagneti c Compati bility We Shift Cam Limited, declare under our sole responsibility that the product PG0001 to which this declarati on relates, complies with Part 15 of the FCC Rules. Operati on is subject to the following two conditi ons: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operati on. protecti on against harmful interference in a residenti al installati on. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructi ons, may cause harmful interference to radio communicati ons. However, there is no guarantee that interference will not occur in a parti cular installati on. If this equipment does cause harmful interference to radio or television recepti on, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: Federal Communicati on Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable FCC Cauti on Any changes or modifi cati ons n ot expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Radia on Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC ID：2A7IM-PG0001 ShiftCam ProGrip Regulator Compliance Information Reorient or relocate the receiving antenna Increase the distance between the equipment and the receiver Connect the equipment to an outlet on a circuit diff erent from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help EU Compliance Statement Shift Cam Limited hereby declares that this product is in compliance with the essenti al requirements and other relevant provisions of the R&TTE Directi ve and Radio Equipment Directi ve 2014/53/EU, and all other applicable EU directi ve requirements. Qi BPP certi fi ed and compati ble with EPP. The WEEE symbol indicates that this product must not be disposed of with normal household waste. When you dispose of this product you must do so in accordance with local environmental laws and guidelines. For more informati on on how to dispose of this product please contact your local authority, disposal service, or Shift Cam Limited directly. ShiftCam - Getting Started draft 07.indd Spread 2 of 8 - Pages(2, 15)ShiftCam - Getting Started draft 07.indd Spread 2 of 8 - Pages(2, 15)6/4/21 10:40 AM6/4/21 10:40 AM User ManualPart II14 Need Assistance? Got a questi on about our products? Scan the QR code to submit an enquiry, or email us at cs@shift cam.com and we would be happy to assist you. Happy shooti ng! To learn more about Shift Cam, visit our offi cial website at Shift Cam.com Att aching ProGrip to Your Smartphone Checking ProGrip’s Batt ery Power Level Align your smartphone to the center of the clamp, indicated by the markings on the clamp arms Push down the lower arm with your smartphone to open up the clamp Push your smartphone into the top arm and release the clamp to secure To release your smartphone from ProGrip, open the clamp and remove your smartphone Press the shutt er butt on on ProGrip. The blinking blue LED indicates pairing mode is acti ve. Turn on the bluetooth pairing on your smartphone and select “Shift Cam ProGrip” to pair A solid blue LED light indicates successful pairing Click and shoot on your mobile using the shutt er butt on Press the bluetooth butt on and hold for 3 seconds to reset bluetooth Blue LED light will start blinking, indicati ng bluetooth is in pairing mode. The shutt er butt on mirrors the functi ons of the camera butt on of your phone’s primary camera app. Short press to take photo, long press to take burst/video Double-press the Charging Butt on White LED lights will turn off , indicati ng that charging functi on has been turned off 1) 2) 3) 4) 1) 2) 3) 4) 1) 2) 1) 2) To att ach ProGrip to your smartphone: Connecti ng to Bluetooth Shutt er To connect bluetooth shutt er: To reset bluetooth: To turn off USB-C charging functi on:Note: For smaller phone models with width <75mm, add the Rubber In-Lay Att achments included in packaging onto the inside of the clamp to secure. Sleep Mode: Aft er 15 mins without pressing the shutt er butt on, ProGrip will enter sleep mode. To reacti vate, press the shutt er butt on once The white LED lights on ProGrip indicates its batt ery level To check ProGrip’s batt ery level: Press the Charging Butt on, LED light indicati ng power level will appear Hand Strap To att ach Hand Strap Feed the end of the nylon strap from bott om up through the Hand Strap Loop, then feed the nylon strap back into the plasti c buckle Adjust length by pulling the nylon strings against the plasti c buckles on top and bott om of the Hand Strap Place the Hand Strap Att achment on the bott om of ProGrip aligned with openings, screw in knob to secure 1) 2) 3) Cold Shoe Mount Mounti ng Accessories using Cold Shoe Mount / Cold Shoe Mount Adapter Open the fl ap covering the Cold Shoe Slot on top of ProGrip Place the Cold Shoe Mount above the opening then screw in knob to secure To adjust the angle in which the accessory faces, add-on the rotatable 1) 2) 3) ¼” Tripod Screw Screw in to att ach accessories into the ¼” screw thread on t…

Text truncated - open the document above for the full version.

ShiftCam Limited. Model difference statement Product Name: ProGrip Model N o.: PG0001, PG-GP-XX-XX We (ShiftCam Limited., Unit 10, 7/ F, Goldfield Industrial Centre, 1 Sui Wo Road, Fo Tan, Shatin, NT, Hong Kong) hereby state that all the models are the same circuit and RF module, except the Plastic Color and model name. Signature: Name: Benson Chiu Title: General Manager Tel: (852)26200660 Email: [email protected] Date: 9.1.2021

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: ShiftCam Limited. Address: Unit 10, 7/ F, Goldfield Industrial Centre, 1 Sui Wo Road, Fo Tan, Shatin, NT, Hong Kong. Product Name: ProGrip Model Number: PG0001, PG-GP-XX-XX FCC Identifier: 2A7IM-PG0001 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Benson Chiu Date: 6/21/2022 Title: General Manager Signature of applicant:

C5266091_X10_Ed.2 1/1 ShiftCam Limited. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 6/21/2022 Subject: Request for Confidentiality FCC ID: 2A7IM-PG0001 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: Benson Chiu Title: General Manager

Page 1 of 5 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] APPENDIX 1- EUT PHOTO Model: PG0001 Photo 1 Photo 2 Page 2 of 5 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 3 Photo 4 Page 3 of 5 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 5 Photo 6 Page 4 of 5 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 7 Photo 8 Page 5 of 5 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 9 ----End of Report----

Label Location

Page 1 of 6 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] APPENDIX 1- EUT PHOTO Model: PG0001 Photo 1 Photo 2 Page 2 of 6 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 3 Photo 4 Wireless charge ANT Page 3 of 6 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 5 Photo 6 Page 4 of 6 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 7 Photo 8 BT ANT Page 5 of 6 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 9 Photo 10 Page 6 of 6 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Te l : (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Photo 11 Photo 12 ----End of Report----

Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86‐755)88850135 Fax: (86‐755) 88850136 Web: www.mtitest.com E‐mail: [email protected] RF EXPOSURE Test Report Report No.: MTi210706005-01E3 Date of issue: 2022-07-07 Applicant: ShiftCam Limited Product name: ProGrip Model(s): PG0001, PG-GP-XX-XX FCC ID: 2A7IM-PG0001 Shenzhen Microtest Co., Ltd. http://www.mtitest.com - Page 2 of 6- Report No.: MTi210706005-01E3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86‐755)88850135 Fax: (86‐755) 88850136 Web: www.mtitest.com E‐mail: [email protected] Instructions 1. The report shall not be partially reproduced without the written consent of the laboratory; 2. The test results of this report are only responsible for the samples submitted; 3. This report is invalid without the seal and signature of the laboratory; 4. This report is invalid if transferred, altered or tampered with in any form without authorization; 5. Any objection to this report shall be submitted to the laboratory within 15 days from the date of receipt of the report. - Page 3 of 6- Report No.: MTi210706005-01E3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86‐755)88850135 Fax: (86‐755) 88850136 Web: www.mtitest.com E‐mail: [email protected] TEST RESULT CERTIFICATION Applicant’s name .................... ShiftCam Limited Address .................................. Unit 10, 7/ F, Goldfield Industrial Centre, 1 Sui Wo Road, Fo Tan, Shatin, NT, Hong Kong Manufacturer's Name ............. ShiftCam Limited Address .................................. Unit 10, 7/ F, Goldfield Industrial Centre, 1 Sui Wo Road, Fo Tan, Shatin, NT, Hong Kong Product description Product name ........................... ProGrip Trademark ............................. ShiftCam Model Name .......................... PG0001 Serial Model ........................... PG-GP-XX-XX Standards ............................... N/A Test procedure ....................... KDB 447498 D01 v06 Date of Test Date (s) of performance of tests ............. : 2021-08-09 ~ 2022-07-04 Test Result .............................................. : Pass This device described above has been tested by Shenzhen Microtest Co., Ltd. and the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. Testing Engineer : ( Danny Xu) Technical Manager : ( Leon Chen) Authorized Signatory : ( Tom Xue) - Page 4 of 6- Report No.: MTi210706005-01E3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86‐755)88850135 Fax: (86‐755) 88850136 Web: www.mtitest.com E‐mail: [email protected] Table of Contents 1. STANDALONE SAR TEST EXCLUSION CONSIDERATIONS ......................................................................................... 5 2. SAR TEST EXCLUSION THRESHOLDS ....................................................................................................................... 6 - Page 5 of 6- Report No.: MTi210706005-01E3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86‐755)88850135 Fax: (86‐755) 88850136 Web: www.mtitest.com E‐mail: [email protected] 1. Standalone SAR test exclusion considerations Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition(s), listed below, is (are) satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions. The minimum test separation distance defined in 4.1 f) is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified, typically in the SAR measurement or SAR analysis report, by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting are required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions. a) For 100 MHz to 6 GHz and test separation distances ≤ 50 mm, the 1-g and 10-g SAR test exclusion thresholds are determined by the following: [(max. power of channel, including tune-up tolerance, mW) / (min. test separation distance, mm)] ꞏ [√f(GHz)] ≤ 3.0 for 1-g SAR, and ≤ 7.5 for 10-g extremity SAR, where  f (GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison  The values 3.0 and 7.5 are referred to as numeric thresholds in step b) below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm, and for transmission frequencies bet…

Text truncated - open the document above for the full version.

Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’ an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web:www.mtitest.com E-mail: [email protected] Test Report Report No.: MTi210706005-01E4 Date of issue: 2022-07-07 Applicant: ShiftCam Limited Product: ProGrip Model(s): PG0001, PG-GP-XX-XX FCC ID: 2A7IM-PG0001 Shenzhen Microtest Co., Ltd. http://www.mtitest.com Page 2 of 24 Report No.: MTi210706005-01E4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86‐755)88850135 Fax: (86‐755) 88850136 Web: www.mtitest.com E‐mail: [email protected] Instructions 1. This test report shall not be partially reproduced without the written consent of the laboratory. 2. The test results in this test report are only responsible for the samples submitted 3. This test report is invalid without the seal and signature of the laboratory. 4. This test report is invalid if transferred, altered, or tampered with in any form without authorization. 5. Any objection to this test report shall be submitted to the laboratory within 15 days from the date of receipt of the report. Page 3 of 24 Report No.: MTi210706005-01E4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86‐755)88850135 Fax: (86‐755) 88850136 Web: www.mtitest.com E‐mail: [email protected] Contents 1 General Description .......................................................................................................................... 5 1.1 Description of the EUT ....................................................................................................................................... 5 1.2 Description of test modes ................................................................................................................................... 5 1.3 Description of support units ................................................................................................................................ 6 2 Test facilities and accreditations ..................................................................................................... 7 2.1 Test laboratory .................................................................................................................................................... 7 3 List of test equipment ....................................................................................................................... 7 4 Test result........................................................................................................................................... 8 4.2 Test setup ........................................................................................................................................................... 9 4.3 Test Procedures ................................................................................................................................................ 10 4.4 Equipment Approval Considerations item 5 b) of KDB 680106 D01 v03r01 .................................................... 11 4.5 Test results ....................................................................................................................................................... 12 Photographs of the test setup ............................................................................................................... 24 Photographs of the EUT ........................................................................................................................ 24 Page 4 of 24 Report No.: MTi210706005-01E4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86‐755)88850135 Fax: (86‐755) 88850136 Web: www.mtitest.com E‐mail: [email protected] Test Result Certification Applicant: ShiftCam Limited Address: Unit 10, 7/ F, Goldfield Industrial Centre, 1 Sui Wo Road, Fo Tan, Shatin, NT, Hong Kong Manufacturer: ShiftCam Limited Address: Unit 10, 7/ F, Goldfield Industrial Centre, 1 Sui Wo Road, Fo Tan, Shatin, NT, Hong Kong Product description Product name: ProGrip Trademark: ShiftCam Model name: PG0001 Serial Model: PG-GP-XX-XX Standards: FCC CFR 47 PART 1, § 1.1310 Test method: KDB 680106 v03r01 Date of Test Date of test: 2021-08-09 ~ 2022-07-04 Test result: Pass Test Engineer : (Danny Xu) Reviewed By: : (Leon Chen) Approved By: : (Tom Xue) Page 5 of 24 Report No.: MTi210706005-01E4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86‐755)88850135 Fax: (86‐755) 88850136 Web: www.mtitest.com E‐mail: [email protected] 1 General Description 1.1 Description of the EUT Product name: ProGrip Model name: PG0001 Series Model: PG-GP-XX-XX Model difference: All the models are the same circuit and RF module, except the Plastic Color and model name. Electrical rating: Input: Type C 5V/3A, 9V/2A Output: Type C 5V/3A, 9V/2A, 12V/1.5A Wireless: 5W Accessories: 1. USB-C to USB-C cable (1.2 m) RF specification: Operation frequency: transmitter 1: 115 kHz – 205 kHz Modulation type: ASK Antenna type: Coil Antenna 1.2 Description of test modes All the test modes were carried out with the EUT in normal operation, the final test mode of the EUT was the worst test mode for emission test, which was shown in this report and defined as: No. Emission test modes Mode 1 Stand-by mode Mode 2 Wireless output (5W) The test data only show worst test mode: Mode 2 Page 6 of 24 Report No.: MTi210706005-01E4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86‐755)88850135 Fax: (86‐755) 88850136 Web: www.mtitest.com E‐mail: [email protected] 1.3 Description of support unit…

Text truncated - open the document above for the full version.

Page 1 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86‐755)88850135 Fax: (86‐755) 88850136 Web: www.mtitest.com E‐mail: [email protected] APPENDIX 2- Test setup photo Model: PG0001 BT: Radiated emissions – Blew 30 MHz Radiated emissions – Above 1 GHz Page 2 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86‐755)88850135 Fax: (86‐755) 88850136 Web: www.mtitest.com E‐mail: [email protected] Wireless charger: Radiated emissions – Blew 30 MHz Radiated emissions – Above 1 GHz Page 3 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86‐755)88850135 Fax: (86‐755) 88850136 Web: www.mtitest.com E‐mail: [email protected] MPE- setup 1 MPE- setup 2 ----End of Report----