2A7Z4-FHXPower Bank

Ningbo Fulman Communication Technology Co., Ltd 2024-11-26 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID: 2A7Z4-FHX) [Ningbo Fulman Communication Technology Co., Ltd] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Lingyun Shen General manager Ningbo Fulman Communication Technology Co., Ltd No.98, Yuanzhong Road,Economic Development Zone, Xiang shan County, Zhejiang,China Ningbo Fulman Communication Technology Co., Ltd 2024-11-26 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for(FCC ID: 2A7Z4-FHX ) [Ningbo Fulman Communication Technology Co., Ltd ] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Lingyun Shen General manager Ningbo Fulman Communication Technology Co., Ltd No.98, Yuanzhong Road,Economic Development Zone, Xiang shan County, Zhejiang,China

External Photographs View of EUT-1 View of EUT-2 Page 2 of 4 View of EUT-3 View of EUT-4 Page 3 of 4 View of EUT-5 View of EUT-6 Page 4 of 4 View of EUT-7 View of EUT-8

视图 关键尺寸 技术要求 1. 表面无披风 / 毛刺等不良 2. 保证带公差和带 *尺寸 \ P 3. 未标公差按: GB/T14486-2008} 公差表 4. 未标尺寸按3D,未标圆 / 倒角为 R 0.25 / C 0.25 5. 所有材质都要能通过环保认证 修改标识 版本 变更内容 变更日期 变更担当 V00 首次发行 2024-08-02 机种 1/1 MM 页数 单位 核准 审核 材质 比例 表面处理 子件编号 子件名称 制图 ±0.80 ±0.50 ＞400-1000＞120-400 ±2 ±1° ＞30-120 ±0.30±0.20 ±1 ＞6-30 ±2° ±0.10 ±0.25 ＞0.5-6 线性 C角/R角 角度 公差范围 宁波福茂通讯科技有限公司 公差表 GB/T1804-2000 级别 M 1:1 FHX 移动电源 标识 塑料 邹春详 FHX 彭龙 V01 改参数文案 2024-08-13 镭雕内容： 字符镭雕: 镭雕效果 PANTONE Cool Gray 5C 对应插口 居中 9 . 7 3 m m 1 4 . 6 4 m m 22.305 mm 1 0 6 . 0 0 m m 30.00 mm 4 8 . 8 3 m m 23.38 mm 3 . 2 6 m m 7 . 0 0 m m 居中

Internal Photographs Internal View of EUT-1 Internal View of EUT-2 Page 2 of 4 Internal View of EUT-3 Internal View of EUT-4 Page 3 of 4 Internal View of EUT-5 Internal View of EUT-6 Page 4 of 4 Internal View of EUT-7 Internal View of EUT-8

1 / 10 EUT Specification FCC ID: 2A7Z4-FHX Characteristics Description Product Name Power Bank Model number FHX Series Model FHXW0, FHXB0 Power Supply AC 120V/60Hz DC 5V / DC 9V / DC 12V Battery 3.7V Operating Frequency Range 110-205kHz Modulation Technique ASK Antenna Type Coil Antenna Device category Portable (<20cm separation) Mobile (>20cm separation) Others ___ Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Evaluation applied MPE Evaluation SAR Evaluation Applicable Standard: FCC Part 1(1.1310) ,Part 2(2.1093) and KDB 680106 D01 Wireless Power Transfer v04 Applicable Requirement: Three different categories of transmitters are defined by the FCC in OET Bulletin 65. These categories are fixed installation, mobile, and portable and are 2 / 10 defined as follows: Fixed Installations: fixed location means that the device, including its antenna, is physically secured at a permanent location and is not able to be easily moved to another location. Additionally, distance to humans from the antenna is maintained to at least 2 meters. Mobile Devices: a mobile device is defined as a transmitting device designed to be used in other than fixed locations and to be generally used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitter's radiating structures and the body of the user or nearby persons. Transmitters designed to be used by consumers or workers that can be easily re-located, such as a wireless modem operating in a laptop computer, are considered mobile devices if they meet the 20 centimeter separation requirement. The FCC rules for evaluating mobile devices for RF compliance are found in 47 CFR ß2.1091. Portable Devices: a portable device is defined as a transmitting device designed to be used so that the radiating structure(s) of the device is/are within 20 centimeters of the body of the user. Portable device requirements are found in Section 2.1093 of the FCC's Rules (47 CFRß2.1093). The FCC also categorizes the use of the device as based upon the user’s awareness and ability to exercise control over his or her exposure. The two categories defined are Occupational/ Controlled Exposure and General Population/Uncontrolled Exposure. These two categories are defined as follows: Occupational/controlled exposure limits apply in situations in which persons are exposed as a consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. Limits for occupational/controlled exposure also apply in situations when a person is transient through a location where occupational/controlled limits apply provided he or she is made aware of the potential for exposure. The phrase fully aware in the context of applying these exposure limits means that an exposed person has received written and/or verbal information fully explaining the potential for RF exposure resulting from his or her employment. With the exception oftransient persons, this phrase also means that an exposed person has received appropriate training regarding work practices relating to controlling or mitigating his or her exposure. Such training is not required for transient persons, but they must receive written and/or verbal information and notification (for example, using signs) concerning their exposure potential and appropriate means available to mitigate their exposure. The phrase exercise control means that an exposed person is allowed to and knows how to reduce or avoid exposure by administrative or engineering controls and work practices, such as use of personal protective equipment or time averaging of exposure. General population/uncontrolled exposure limits apply in situations in which the general public may be exposed, or in which persons who are 3 / 10 exposed as a consequence of their employment may not be fully aware of the potential for exposure or cannot exercise control over their exposure. Licensees and applicants are responsible for compliance with both the occupational/controlled exposure limits and the general population/uncontrolled exposure limits as they apply to transmitters under their jurisdiction. Licensees and applicants should be aware that the occupational/controlled exposure limits apply especially in situations where workers may have access to areas in very close proximity to antennas and access to the general public may be restricted. In lieu of evaluation with the general population/uncontrolled exposure limits, amateur licensees authorized under part 97 of this chapter and members of his or her immediate household may be evaluated with respect to the occupational/controlled exposure limits in this section, provided appropriate training and information has been provided to the amateur licensee and members of his/her household. Other nearby persons who are not members of the amateur licensee's household must be evaluated with respect to the general population/uncontrolled exposure limits. Test Setup Block 4 / 10 Test Procedure 1.Connect the EUT and equipment as above diagram of test configuration. 2.EUT was placed on a table, and the measure probe was placed at a measurement distance of 15cm from the EUT to the center of the probe. 3.Power on the measuring probe, the EUT was set at the maximum field strength emission state. 4.The EUT was put in different directions (Left, Right, Front, Rear, Top and Bottom) toward to the measure probe. The distance from the top of the EUT to the probe is 20CM, and the distance from other directions is 15cm.Measure the value of field strength. 5.Record the worst data of the different directions. Measuring Device And Test Equipment Used Equipment Manufacturer Model No. Serial No. Last Cal. Due Date  E&H-Field Probe(9kHz-30M Hz) Narda EHP-200A 180ZX11012 2024/09/14 2025/09/13 Description of Support Device phone ： Manufacturer: Apple Inc. M/N: A2404 S/N: N/A phone ： Manufacturer: Xiaomi M/N:…

Text truncated - open the document above for the full version.

Product Confirmation Letter Specification No. HG20240829001 effective date Customer Name Xin Weijia product type Wireless charging coil Honggui part No. 43.5 * 0.8 double slot with holes, black film with white adhesive backing Customer part No. 4.01.030.00140 【 □ New Revision Release , □ Version revision】 【 This specification includes a table of contents with a total of 2 pages 】【 RoHS Compliant Parts edit examine and verify approve Peng Jianji Anfu Honggui Electronics Co., Ltd This product confirmation Letter must be signed and returned by the customer within one week of receipt. Failure to do so will be considered as production and will be executed according to the standards of this acknowledgement letter. 【 customer approval 】 date: approve Status： □Fully approve □Conditional approve □rejection approveexamine and verifyRe-checkcheck √√ Product Specification Sheet Customer Name Xin Weijia Customer part No. 4.01.030.00140 Honggui part No. 43.5 * 0.8 double slot with holes, black film with white adhesive backing Specification No. HG20240829001 version 01 ♦、dimension (unit: mm) A43.5 ±.0.5 B40.0 ±1.5 C16.0 ±0.5 D5.3 E37.0 ±2 F70.0 ±2 G2.0 ±1 H1.9 ±0.2 I0.8 ±0.1 J8.0 (1) Wire diameter: 0.08 * 24 * 2P hot air self-adhesive wire (2) Number of coils: 12TS (3) The starting and ending lines intersect (4) Wrap the coil with 8mm wide high-temperature tape (5) The coil and magnetic sheet need to be pasted in the center (6) The front of the magnetic sheet is covered with black film and the back is round 42 white adhesive(6) The front of the magnetic sheet is covered with black film and the back is round 42 white adhesive Specification SpecificationTest conditionsTest equipment LO6.3±0.5μH100KHz/1V ■TH1816B Q>30min100KHz/1V ■TH1816B DCR <60mΩ@ 25 °C■CH-502BC operate temperature-40°C~ 125°C ♦、Material List:: No. 1 product description Material specification s supplierremarks 2 magnetic sheet 43.5*0.8 Open double slots with holes PC95 Manganese Zinc 3 copper wire0.08*24*2PSelf adhesive copper wire wrapped 4 High temperature adhesive tape 8MMEnvironmentally friendly tape 5 tin High temperature tin strip Qiandao Environmentally friendly Tin 6 glueWhite glueEnvironmentally friendly adhesive 7 Adhesive backing 42 round white glue edit examine and verifyapprove Peng Jianji

TRF No.: 04-E001-0B TRF Originator: GTG TRF Date: 2023-12-13 Web: www.gtggroup.com E-mail: [email protected] Tel.: 86-400 755 8988 CFR 47 FCC PART 15 SUBPART C TEST REPORT For Power Bank MODEL NUMBER: FHX, FHXW0, FHXB0 REPORT NUMBER: E04A24080284F00701 ISSUE DATE: November 18, 2024 FCC ID: 2A7Z4-FHX Prepared for Ningbo Fulman Communication Technology Co., Ltd No.98, Yuanzhong Road,Economic Development Zone, Xiang shan County, Zhejiang,China Prepared by Guangdong Global Testing Technology Co., Ltd. Room 101-105, 203-210, Building 1, No.2, Keji 8 Road, Songshan Lake Park, Dongguan city, Guangdong, People’s Republic of China, 523808 This report is based on a single evaluation of the submitted sample(s) of the above mentioned Product, it does not imply an assessment of the production of the products. This report shall not be reproduced, except in full, without the written approval ofGuangdong Global Testing Technology Co., Ltd. REPORT NO.: E04A24080284F00701 Page 2 of 27 TRF No.: 04-E001-0B Global Testing , Great Quality. Revision History Rev. Issue Date Revisions Revised By V0 November 18, 2024 Initial Issue REPORT NO.: E04A24080284F00701 Page 3 of 27 TRF No.: 04-E001-0B Global Testing , Great Quality. Summary of Test Results Test Item Limit/Requirement Result Antenna Requirement FCC Part 15.203 Pass AC Power Line Conducted Emission FCC Part 15.207 Pass 20dB Bandwidth FCC Part 15.215 Pass Radiated Emission FCC Part 15.205/15.209 Pass Note: 1. N/A: In this whole report not applicable. *This test report is only published to and used by the applicant, and it is not for evidence purpose in China. *The measurement result for the sample received is <Pass> according to <CFR 47 FCC PART 15 SUBPART C> when <Accuracy Method> decision rule is applied. REPORT NO.: E04A24080284F00701 Page 4 of 27 TRF No.: 04-E001-0B Global Testing , Great Quality. CONTENTS 1. ATTESTATION OF TEST RESULTS ..................................................................................... 5 2. TEST METHODOLOGY ......................................................................................................... 6 3. FACILITIES AND ACCREDITATION ..................................................................................... 6 4. CALIBRATION AND UNCERTAINTY ................................................................................... 7 4.1. MEASURING INSTRUMENT CALIBRATION ........................................................... 7 4.2. MEASUREMENT UNCERTAINTY ............................................................................ 7 5. EQUIPMENT UNDER TEST .................................................................................................. 8 5.1. DESCRIPTION OF EUT ........................................................................................... 8 5.2. TEST MODE ............................................................................................................. 8 5.3. SUPPORT UNITS FOR SYSTEM TEST ................................................................... 8 5.4. SETUP DIAGRAM .................................................................................................... 9 6. MEASURING EQUIPMENT AND SOFTWARE USED......................................................... 10 7. RADIATED TEST RESULTS ............................................................................................... 11 7.1. Radiated Spurious Emission ................................................................................... 15 8. AC POWER LINE CONDUCTED EMISSION ...................................................................... 21 9. 20DB BANDWIDTH ............................................................................................................. 24 10. ANTENNA REQUIREMENT ................................................................................... 27 REPORT NO.: E04A24080284F00701 Page 5 of 27 TRF No.: 04-E001-0B Global Testing , Great Quality. 1. ATTESTATION OF TEST RESULTS Applicant Information Company Name: Ningbo Fulman Communication Technology Co., Ltd Address: No.98, Yuanzhong Road,Economic Development Zone, Xiang shan County, Zhejiang,China Manufacturer Information Company Name: Ningbo Fulman Communication Technology Co., Ltd Address: No.98, Yuanzhong Road,Economic Development Zone, Xiang shan County, Zhejiang,China EUT Information Product Description: Power Bank Model: FHX, FHXW0, FHXB0 Brand: VENTION Sample Received Date: August 19, 2024 Sample Status: Normal Sample ID: A24080284 001 Date of Tested: August 19, 2024 to November 18, 2024 APPLICABLE STANDARDS STANDARD TEST RESULTS CFR 47 FCC PART 15 SUBPART C Pass Prepared By: Checked By: Jok Yang Alan He Project Engineer Laboratory Leader Approved By: Shawn Wen Laboratory Manager REPORT NO.: E04A24080284F00701 Page 6 of 27 TRF No.: 04-E001-0B Global Testing , Great Quality. 2. TEST METHODOLOGY All tests were performed in accordance with the standard CFR 47 FCC PART 15 SUBPART C 3. FACILITIES AND ACCREDITATION Accreditation Certificate A2LA (Certificate No.: 6947.01) Guangdong Global Testing Technology Co., Ltd. has been assessed and proved to be in compliance with A2LA. FCC (FCC Designation No.: CN1343) Guangdong Global Testing Technology Co., Ltd. has been recognized to perform compliance testing on equipment subject to Supplier's Declaration of Conformity (SDoC) and Certification rules ISED (Company No.: 30714) Guangdong Global Testing Technology Co., Ltd. has been registered and fully described in a report filed with ISED. The Company Number is 30714 and the test lab Conformity Assessment Body Identifier (CABID) is CN0148. Note: All tests measurement facilities use to collect the measurement data are located at Room 101-105, 203-210, Building 1, No.2, Keji 8 Road, Songshan Lake Park, Dongguan city, Guangdong, People’s Republic of China, 523808 REPORT NO.: E04A24080284F00701 Page 7 of 27 TRF No.: 04-E001-0B Global Testing , Great Quality. 4. CALIBRATION AND UNCERTAINTY 4.1. MEASURING INSTRUME…

Text truncated - open the document above for the full version.

Radiated Spurious Emission AC Power Line Conducted Emission RF Exposure Evaluation