2A9Q9-M1036QStorage wireless charger box

2023.06.15 FCC Warning FCC Warning NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF Exposure Statement To maintain compliance with FCC'S RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

ShenZhen Zhongyi Technology CO., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: November 28, 2023 FCC ID: 2A9Q9-M1036Q Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing ShenZhen Zhongyi Technology CO., Ltd. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing ShenZhen Zhongyi Technology CO., Ltd. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Applicant: ShenZhen Zhongyi Technology CO., Ltd. Address: Room 401, No.4 Road One, Shangxue Science and Technology City, Xinxue Community, Bantian Street, Longgang District, Shenzhen, China Contact Person: Merry Yu Tel.: 0755-89501773 Email: [email protected] Sincerely, Signature:

US Authorized Representative Letter Declaration of Appointment as US Authorized Representative To whom it may concern USA MEIHUA TRADING INC (5379 Pine Valley Ct Boulder CO 80301 United States)as the contact representative in the US, has been appointed by .Shenzhen Zhongyi Technology CO., Ltd. (Room 401, No.4 Road One,Shangxue Science and Technology City, Xinxue Community, Bantian Street, Longgang District, Shenzhen.China) to cover product in the us market as us Representati ve. Grantee Code: 2A9Q9 FRN: 0033187147 This Agreement Is valid until (04-09-2024). US Representative Company: USA ME旧UA TRADING INC Address :5379 Pine Valley Ct Boulder CO 80301 United States FCC Registration Number (FRN) :00 33406166

Fine Page 1 of 2 承 認 書 SPECIFICATION FOR APPROVAL 客戶： CUSTOMER: 客 戶 料 號： CUST P/N: 03020800020 言之行 料 號： Y Z X P/N: YZX44 産 品 型 號： DESC: Φ43.5MMX5.0MM 日 期： DATE: 2023/2/28 版本： Version: A.0 擬制 PREPARED BY 審核 CHECKED BY 批准 APPROVED BY 客戶承認 CUSTOMER APPROVE 东莞市言之行电子科技有限公司 工廠地址：东莞市塘厦镇石马新围8号 Dongguan Yan line electronic technology Co., LTD address：No.8 Shima Xinwei, Tangxia Town, Dongguan City Fine Page 2 of 2 SPECIFICATION 産 品 型 號： DESC Φ43.5MMX5.0MM 版本 Rev：A.0 客戶CUST: 客户料号CUST P/N: 一、尺寸DIMENSION:(mm) 二、原理图SCHEMATIC DIAGRAM: A 39.0±1.5 B 20.5±0.5 C 1.25 Max D 55±3 E 2-5 F 43±2 G 10.0 ref H 1.6Max I 5.3 ref M 8.0 ref J 42±1 K 3.0±1 三、绕线参数Winding Specification: 序号 NO. 端子 TERMINAL 线径 WIRE 圈数 Turns 绕线方向 Winding Direction 1 S F 24*0.08*2p 10Ts CCW 四、电气特性ELECTRICAL CHARACTERISTICS: 温度TEMPERATURE:25±10°C, 湿度RELATIVE HUMIDITY:65±20% 序号 NO. 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TEST FREQUENCY 测试仪器 TEST EQUIPMENTS 1 IND. S-F3.8uH ±20% Individual coil 100KHz/1.0V LCZ METER 1062B 2 IND. S-F6.4uH ±10% add magnetic sheet100KHz/1.0V LCZ METER 1062B 3 DCR S-F≤120mΩ LCZ METER 502B 擬制/日期PREPARED BY/DATE審核/日期CHECKED BY/DATE

ShenZhen Zhongyi Technology CO., Ltd. Date: November 28, 2023 Product Model Number: M1036Q FCC ID: 2A9Q9-M1036Q To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that ORGANIZATION. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by ORGANIZATION. on our behalf shall have the same effect as acts of our own. By: Merry Yu Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: 0755-89501773 On behalf of: ShenZhen Zhongyi Technology CO., Ltd.

ShenZhen Zhongyi Technology CO., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: November 28, 2023 Subject; Request for Confidentiality FCC ID: 2A9Q9-M1036Q To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Merry Yu Title: Manager

FCC ID: 2A9Q9-M1036Q External

Page 1 of 1 Label and Information FCC Label Sample FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location

FCC ID: 2A9Q9-M1036Q Internal Coil ANT

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 11 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Exposure Report For Applicant Name: ShenZhen Zhongyi Technology CO., Ltd. Address: Room 401, No.4 Road One, Shangxue Science and Technology City, Xinxue Community, Bantian Street, Longgang District, Shenzhen, China EUT Name: Storage wireless charger box Brand Name: / Model Number: M1036Q Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF230814R00602 Test Standards: 47 CFR Part 1 Subpart I Section 1.1310 FCC ID: 2A9Q9-M1036Q Test Conclusion: Pass Test Date: 2023-08-07 to 2023-08-25 Date of Issue: 2023-11-25 Prepared By: Chris Liu / Project Engineer Date: 2023-11-25 Approved By: Ryan.CJ / EMC Manager Date: 2023-11-25 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF230814R00602 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 11 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2023-11-25 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF230814R00602 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 11 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1.Introduction ............................................................................................................................................................................................ 4 1.1 Identification of Testing Laboratory ................................................................................................................................. 4 1.2 Identification of the Responsible Testing Location ...................................................................................................... 4 1.3 Laboratory Condition ........................................................................................................................................................... 4 1.4 Announcement ....................................................................................................................................................................... 4 2.Product Information .............................................................................................................................................................................. 5 2.1 Application Information ....................................................................................................................................................... 5 2.2 Manufacturer Information .................................................................................................................................................... 5 2.3 Factory Information .............................................................................................................................................................. 5 2.4 General Description of Equipment under Test (EUT)................................................................................................... 5 2.5 Technical Information........................................................................................................................................................... 5 3.Test Requirement ................................................................................................................................................................................. 6 3.1 Test Modes .............................................................................................................................................................................. 8 3.2 Test Auxiliary Equipment .................................................................................................................................................... 8 3.3 Assessment Result ............................................................................................................................................................... 9 3.4 Test Set-up Photo ................................................................................................................................................................ 10 Test Report Number: BTF230814R00602 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 4 of 11 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China 1. Introduction 1.1 Identification of Testing Laboratory Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Phone Number: +86-0755-23146130 Fax Number: +86-0755-23146130 1.2 Identification of the Responsible Testing Location Test Location: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, B…

Text truncated - open the document above for the full version.

Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 1 of 28 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China RF Test Report For Applicant Name: ShenZhen Zhongyi Technology CO., Ltd. Address: Room 401, No.4 Road One, Shangxue Science and Technology City, Xinxue Community, Bantian Street, Longgang District, Shenzhen, China EUT Name: Storage wireless charger box Brand Name: / Model Number: M1036Q Issued By Company Name: BTF Testing Lab (Shenzhen) Co., Ltd. Address: F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Report Number: BTF230814R00601 Test Standards: 47 CFR Part 15 Subpart C FCC ID: 2A9Q9-M1036Q Test Conclusion: Pass Test Date: 2023-08-07 to 2023-08-25 Date of Issue: 2023-11-25 Prepared By: Chris Liu / Project Engineer Date: 2023-11-25 Approved By: Ryan.CJ / EMC Manager Date: 2023-11-25 Note: All the test results in this report only related to the testing samples. Which can be duplicated completely for the legal use with approval of applicant; it shall not be reproduced except in full without the written approval of BTF Testing Lab (Shenzhen) Co., Ltd., All the objections should be raised within thirty days from the date of issue. To validate the report, you can contact us. Test Report Number: BTF230814R00601 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 2 of 28 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Revision History Version Issue Date Revisions Content R_V0 2023-11-25 Original Note: Once the revision has been made, then previous versions reports are invalid. Test Report Number: BTF230814R00601 Total or partial reproduction of this document without permission of the Laboratory is not allowed. Page 3 of 28 BTF Testing Lab (Shenzhen) Co., Ltd. F101, 201 and 301, Building 1, Block 2, Tantou Industrial Park, Tantou Community, Songgang Street, Bao'an District, Shenzhen, China Table of Contents 1. Introduction ............................................................................................................................................................................................ 4 1.1 Identification of Testing Laboratory ................................................................................................................................. 4 1.2 Identification of the Responsible Testing Location ...................................................................................................... 4 1.3 Laboratory Condition ........................................................................................................................................................... 4 1.4 Announcement ....................................................................................................................................................................... 4 2. Product Information .............................................................................................................................................................................. 5 2.1 Application Information ....................................................................................................................................................... 5 2.2 Manufacturer Information .................................................................................................................................................... 5 2.3 Factory Information .............................................................................................................................................................. 5 2.4 General Description of Equipment under Test (EUT)................................................................................................... 5 2.5 Technical Information........................................................................................................................................................... 6 3. Summary of Test Results .................................................................................................................................................................... 7 3.1 Test Standards ....................................................................................................................................................................... 7 3.2 Summary of Test Result ...................................................................................................................................................... 7 3.3 Uncertainty of Test ................................................................................................................................................................ 7 4. Test Configuration ................................................................................................................................................................................ 8 4.1 Environment Condition ........................................................................................................................................................ 8 4.2 Test Equipment List .............................................................................................................................................................. 8 4.3 Test Auxiliary Equipment .................................................................................................................................................. 10 4.4 Test Modes ............................................................................................................................................................................ 10 4.5 Test Setup ................................…

Text truncated - open the document above for the full version.

FCC ID: 2A9Q9-M1036Q Conducted Emission test setup RF radiated test setup 9 kHz -30MHz 30MHz-1GHz