2A9Q9-M2169QUltra-Thin Magnetic Wireless Power Bank 5000mAh

ShenZhen Zhongyi Technology CO., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 22, 2024 FCC ID: 2A9Q9-M2169Q Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing ShenZhen Zhongyi Technology CO., Ltd. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing ShenZhen Zhongyi Technology CO., Ltd. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Applicant: ShenZhen Zhongyi Technology CO., Ltd. Address: Room 401, No.4 Road One, Shangxue Science and Technology City, Xinxue Community, Bantian Street, Longgang District, Shenzhen, China Contact Person: Merry Yu Tel.: 0755-89501773 Email: [email protected] Sincerely, Signature:

USAuthorizedRepresentativeLetter DeclarationofAppointmentasUS AuthorizedRepresentative Towhomitmayconcern USAMEIHUATRADINGINC(5379PineValleyCtBoulderCO80301UnitedStates)asthecontact representativeintheUS, hasbeenappointedbyShenZhenZhongyiTechnologyCO.,Ltd.(Room401,No.4Road One,ShangxueScienceandTechnologyCity,XinxueCommunity,BantianStreet,LonggangDistrict, Shenzhen,China） tocoverproductintheusmarketasusRepresentative. ThisAgreementisvaliduntil(05-23-2025). USRepresentative Company:USAMEIHUATRADINGINC Address:5379PineValleyCtBoulderCO80301UnitedStates FCCRegistrationNumber(FRN):0033406166 Email:[email protected] Date：2024.05.24 lssuerSignature:

Page 1 of 3 承 認 書 SPECIFICATION FOR APPROVAL 客戶： CUSTOMER: 客 戶 料 號： CUST P/N: 03020800055 言之行 料 號： Y Z X P/N: YZX44 産 品 型 號： DESC: Φ43.5MMX5.0MM 日 期： DATE: 2023/6/25 版本： Version: A.0 擬制 PREPARED BY 審核 CHECKED BY 批准 APPROVED BY 客戶承認 CUSTOMER APPROVE 李墨 万楼 李建波 东莞市言之行电子科技有限公司 Dongguan Yan line electronic technology Co., LTD 工廠地址：东莞市塘厦镇石马新围 8 号 Factory address: Dongguan City Tangxia Town Shima Xinwei 8 Page 2 of 3 SPECIFICATION 産 品 型 號： DESC Φ43.5MMX5.0MM 版本 Rev：A.0 客戶CUST: XXX 客户料号CUST P/N: 一、尺寸DIMENSION:(mm) 二、原理图SCHEMATIC DIAGRAM: A 38.5±1.5 B 20.5±0.5 D 50±3 E 2-5 F 43±2 G 10.0 ref H 1.6 Max I 5.3 ref M 8.0 ref J 42±1 K 3.0±1 三、绕线参数Winding Specification: 序号 NO. 端子 TERMINAL 线径 WIRE 圈数 Turns 绕线方向 Winding Direction 1 S F 24*0.08*2p 10Ts CCW 四、电气特性ELECTRICAL CHARACTERISTICS: 温度TEMPERATURE:25±10°C, 湿度RELATIVE HUMIDITY:65±20% 序号 NO. 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TEST F REQUENCY 测试仪器 TEST EQUIPMENTS 1 IND. S-F100KHz/1.03.8uH ±20% V LCZ METER 1062B 2 IND. S-F6.4uH ±10% 100KHz/1.0V LCZ METER 1062B 3 DCR S-F≤100mΩLCZ METER 502B 擬制/日期PREPARED BY/DATE審核/日期CHECKED BY/DATE

ShenZhen Zhongyi Technology CO., Ltd. Date: June 21, 2024 Product Model Number: M2169Q FCC ID: 2A9Q9- M2169Q To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that ORGANIZATION. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by ORGANIZATION. on our behalf shall have the same effect as acts of our own. By: Merry Yu Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: 0755-89501773 On behalf of: ShenZhen Zhongyi Technology CO., Ltd.

ShenZhen Zhongyi Technology CO., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 21, 2024 Subject; Request for Confidentiality FCC ID: 2A9Q9-M2169Q To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Merry Yu Title: Manager

Report No: SSP24050307-1E FCC ID: 2A9Q9-M2169Q Annex of Test Report Annex D. Label and Information FCC Label Sample FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location

- Page 1 of 10 - Report No.: HB20240612001E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com RF EXPOSURE Test Report Product: Ultra-Thin Magnetic Wireless Power Bank 5000mAh Trade Mark: N/A Model Number: M2169Q FCC ID: 2A9Q9-M2169Q Prepared for Shenzhen Zhongyi Technology Co.,Ltd Room 401, building 4, Shangxue Science and Technology city road,Xinxue community, Bantian Street, Longgang District, Shenzhen,China Prepared by Shenzhen HongBiao Certification& Testing Co., Ltd Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen, China Tel.: +86-755-2998 9321 Fax.: +86-755-2998 5110 Website: http://www.sz-hongbiao.com - Page 2 of 10 - Report No.: HB20240612001E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com Table of Contents 1 GENERAL DESCRIPTION ..................................................................................................................................... 5 1.1 DESCRIPTION OF EUT ................................................................................................................................................. 5 1.2 TEST MODE .............................................................................................................................................................. 5 1.3 TEST SETUP .............................................................................................................................................................. 5 1.4 ANCILLARY EQUIPMENT .............................................................................................................................................. 5 2 TEST FACILITIES AND ACCREDITATIONS .............................................................................................................. 6 2.1 TEST LABORATORY ..................................................................................................................................................... 6 2.2 ENVIRONMENTAL CONDITIONS ..................................................................................................................................... 6 2.3 MEASUREMENT UNCERTAINTY ..................................................................................................................................... 6 2.4 TEST SOFTWARE ........................................................................................................................................................ 6 3 LIST OF TEST EQUIPMENT .................................................................................................................................. 7 4 RF EXPOSURE .................................................................................................................................................... 8 4.1 MAXIMUM PERMISSIBLE EXPOSURE .............................................................................................................................. 8 4.1.1. Limit ............................................................................................................................................................ 8 4.1.2. Test Procedures ........................................................................................................................................... 8 4.1.3. Test Setup .................................................................................................................................................... 8 4.1.4. Equipment Approval Considerations item 5 b) of KDB 680106 D01 Wireless ............................................. 9 4.1.5. Test Result ................................................................................................................................................... 9 - Page 3 of 10 - Report No.: HB20240612001E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-755) 29989321 Fax: (86-755) 29985110 Web:www.sz-hongbiao.com TEST RESULT CERTIFICATION Applicant’s Name ................. : Shenzhen Zhongyi Technology Co., Ltd Address ................................. : Room 401, building 4, Shangxue Science and Technology city road,Xinxue community, Bantian Street, Longgang District, Shenzhen, China Manufacturer's Name .......... : Shenzhen Zhongyi Technology Co., Ltd Address ................................. : Room 401, building 4, Shangxue Science and Technology city road,Xinxue community, Bantian Street, Longgang District, Shenzhen, China Product description Product name ........................ : Ultra-Thin Magnetic Wireless Power Bank 5000mAh Model Number ....................... : M2169Q Standards ............................. : FCC CFR 47 PART 1 , 1.1310 Test procedure ....................... : KDB 680106 D01 Wireless Power Transfer v04 This device described above has been tested by Shenzhen HongBiao Certification& Testing Co., Ltd and the test results show that the equipment under test (EUT) is in compliance with the EMC requirements. And it is applicable only to the tested sample identified in the report. Date of Test ........................................... : Date (s) of performance of tests ............. : Jun. 12, 2024~Jun. 14, 2024 Test Result .............................................. : Pass Testing Engineer : ( Z o e Su) Technical Manager : (Mark Chen) Authorized Signatory : (L e o S u) - Page 4 of 10 - Report No.: HB20240612001E-01 Add:Room 102, 201, Building 2, Yuanwanggu RFID Industrial Park, Tongguan Road, Tianliao Community, Yutang Street, Guangming District, Shenzhen,China Tel: (86-7…

Text truncated - open the document above for the full version.

CCUT Testing & Certification Report No: SSP24050307-1E FCC Test Report Page 1 of 23 FCC TEST REPORT FCC ID: 2A9Q9-M2169Q Report No. : SSP24050307-1E Prepared For : Shenzhen Zhongyi Technology Co., Ltd Product Name : Ultra-Thin Magnetic Wireless Power Bank 5000mAh Model Name : M2169Q FCC Rule : FCC Part 15 Subpart C Date of Issue : 2024-06-25 Prepared By : Shenzhen CCUT Quality Technology Co., Ltd. Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. CCUT Testing & Certification Report No: SSP24050307-1E FCC Test Report Page 2 of 23 Test Report Basic Information Applicant..................................: Shenzhen Zhongyi Technology Co., Ltd Address of Applicant...............: Room 401, building 4, Shangxue Science and Technology city road,Xinxue community, Bantian Street, Longgang District, Shenzhen, China Manufacturer..........................: Shenzhen Zhongyi Technology Co., Ltd Address of Manufacturer........: Room 401, building 4, Shangxue Science and Technology city road,Xinxue community, Bantian Street, Longgang District, Shenzhen, China Product Name.........................: Ultra-Thin Magnetic Wireless Power Bank 5000mAh Brand Name.............................: - Main Model..............................: M2169Q Series Models..........................: - Test Standard..........................: FCC Part 15 Subpart C ANSI C63.10-2013 Date of Test .............................: 2024-05-31 to 2024-06-25 Test Result...............................: PASSED Tested Engineer ....................: (Colin Chen) Project Manager......................: (Lieber Ouyang) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. CCUT Testing & Certification Report No: SSP24050307-1E FCC Test Report Page 3 of 23 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................8 2. Summary of Test Results .............................................................................................................................................9 3. Antenna Requirement ............................................................................................................................................... 10 3.1 Standard and Limit.............................................................................................................................................. 10 3.2 Test Result .......................................................................................................................................................... 10 4. Conducted Emissions ................................................................................................................................................ 11 4.1 Standard and Limit.............................................................................................................................................. 11 4.2 Test Procedure.................................................................................................................................................... 11 4.3 Test Data and Results .......................................................................................................................................... 12 5. Radiated Emissions ................................................................................................................................................... 15 5.1 Standard and Limit.............................................................................................................................................. 15 5.2 Test Procedure.................................................................................................................................................... 15 5.3 Test Data and Results .......................................................................................................................................... 17 6. Occupied Bandwidth ................................................................................................................................................. 26 6.1 Standard and Limit.............................................................................................................................................. 26 6.2 Test Procedure.............................................................................................…

Text truncated - open the document above for the full version.

- Page 1 of 3 - Test Setup Photos Photo 1 Photo 2 Test table height 80cm 0cm Test table height 80cm 0cm - Page 2 of 3 - Photo 3 Photo 4 Test table height 80cm 0cm Test table height 80cm 0cm - Page 3 of 3 - Photo 5 Photo 6 Test table height 80cm Test table height 80cm 0cm 0cm

Report No: SSP24050307-1E FCC ID: 2A9Q9-M2169Q Annex of Test Report Annex C. Test Photos Conducted Emission Test View 1 Radiated Emission Test View 1 Report No: SSP24050307-1E FCC ID: 2A9Q9-M2169Q Annex of Test Report Radiated Emission Test View 2 Radiated Emission Test View 3 Report No: SSP24050307-1E FCC ID: 2A9Q9-M2169Q Annex of Test Report Radiated Emission Test View 4