2A9Q9-M2288Q7700mAh Wireless Power Bank with TWS earphone

Power Button Magnetic Wireless Charging Surface Type-C Input/Output Port LCD Display Power Case Earbuds Charging LED Sensor READ ALL INSTRUCTIONS CAREFULLY BEFORE USE AND KEEP THIS MANUAL IN THE BOX • 7700mAh Wireless Power Bank with TWS Earbuds(x1) • Instruction Manual(x1) • Magnetic lron Ring(x1) • Charging Cable(x1) SAFETY PRECAUTIONS • This product is NOT a toy, keep away from children and pets. • Only use the product according to the instructions in this manual. Never use the product for anything other than its intended purpose. • Do not open this product or attempt to repair the unit yourself if it is not working properly. Doing so risks fire, shock or injury. • When not in use, the product should be stored in a dry, cool location, away from sources of water or heat. • Do not expose product or charging cable to extreme temperatures (heat or cold), open flames, humid or wet conditions. • Do not submerge in water. Do not use in a location where the product or charging cable could fall into liquid. • Unplug the charging cable when not in use. Do not pull the charging cable to disconnect, or use the cable as a handle. • Do not use if the product or charging cable is damaged. If the product or charging cable is damaged, it MUST be serviced or replaced by the manufacturer or its service agent before using again. • Do not over charge the battery. Unplug the device when charging is complete. • This product contains a built-in lithium-ion polymer battery and should not be disposed of with regular household waste. Please consult your local hazardous waste agency or waste service provide with instruction on how to dispose of this product. • Any accessories attached to the back of your device can reduce wireless charging efficiency and may lead to overheating. Please remove all attachments before using the wireless power bank. •The strong magnetic fields produced by the neodymium magnets in this device can damage items such as televisions, computers, monitors, credit and bank cards, diskettes and other data storage media, video tapes, mechanical watches, hearing aids, loudspeakers, and VCRs. Pacemakers and other electronic body implants may be damaged or switched into “test mode” when exposed to strong magnetic forces. Maintain a minimum distance of 3 feet . PRODUCT DIAGRAMS WIRELESS CHARGING (Continued) For all other Qi Wireless enabled devices Magnetic Ring Application • Consult your device’s manual to locate the correct position of your device’s Qi Wireless charging coil. • Using the magnetic iron ring (included), remove the sticker lining from the back of the ring and adhere to the the wireless charging area on the back of your device or phone case. After the magnetic ring has been applied to your device or phone case, place the device against the magnetic wireless charging surface. The will begin charging automatically. • If your device does not begin charging, try repositioning your device on the wireless charging surface. You may need to remove the case on your device to charge properly. • Remove your device from the wireless charging surface when it is fully charged Safety Note: Wireless charging will automatically power off when the wireless charging surface is overheated or when a metal object, such as a coin, is place on the wireless charging surface. USING EARBUDS 1.Charging Earbuds • Place the earbuds securely into the charging case. The earbuds will begin charging automatically and the LED light on each earbud will turn red. • When fully charged, the LED on the earbuds will briefly turn blue and then off. 2. Power On • Remove the earbuds from the charging case. You will hear “Power On”. • If the earbuds have previously been paired, are outside of the case and are powered off, simply press and hold each earbud’s touch sensor for 5 seconds to turn them on. 3. Pairing Both Earbuds • Remove one or both earbuds from the case, one earbud will blink red and blue, indicating it is ready to pair. • Upon removal, you will hear the voice prompt “Power On”. • You will hear the voice prompt “Pairing” when the earbud(s) are ready to be paired with your device. • Open your device’s Bluetooth settings and select “M2288Q.” • Once connected, you will hear the voice prompt “Connected,” and you can begin enjoying your audio. Notes: • In pairing search mode, both earbuds will automatically power off if no pairing occurs within 5 minutes. • Earbuds will automatically reconnect after being previously connected to a device. 4. Power Off • In pairing search mode, both earbuds will automatically power off if no pairing occurs within 5 minutes. • While paired with your device, you may do any of the following: • Press and hold one or both earbuds’ touch sensors for 5 seconds to power them off. You will hear the voice prompt “Power Off.” • Alternatively, simply place the earbuds back into the charging case. TECH SPECIFICATIONS Battery Capacity: 7700mAh/3.85V/29.65Wh/Power Bank Battery Capacity: 30mAh/3.7V/0.11Wh/Earbuds Output For Power Case: 5V ⎓0.2A Type-C Input: 5V ⎓3A 9V⎓2A 12V⎓1.5A 18W Max Type-C Output: 5V ⎓3A 9V⎓2.22A 10V⎓2.25A 12V⎓1.67A 22.5W Max Wireless Output: 5W/7.5W/10W/15W FCC INFORMATION This device complies with Part 15 of the FCC Rules. Caution: Any changes or modifications not expressly approved could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be dete…

Text truncated - open the document above for the full version.

Rev 1/26/2023 ShenZhen Zhongyi Technology CO., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 01-27-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2A9Q9-M2288Q [ShenZhen Zhongyi Technology CO., Ltd.] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [ShenZhen Zhongyi Technology CO., Ltd.] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Merry Yu Rev 1/26/2023 ShenZhen Zhongyi Technology CO., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 01-27-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2A9Q9-M2288Q [ShenZhen Zhongyi Technology CO., Ltd.] ce8rtifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Merry Yu

ShenZhen Zhongyi Technology CO., Ltd. U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: January 27, 2026 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2A9Q9-M2288Q ShenZhen Zhongyi Technology CO., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Company Name: ShenZhen Zhongyi Technology CO., Ltd. FRN: 0033187147 Address: Room 401, No.4 Road One, Shangxue Science and Technology City, Xinxue Community, Bantian Street, Longgang District, Shenzhen, China Signature: Contact Person: Merry Yu Tel: 0755-89501773 Email: [email protected]

： ： ： ： TEL：0769-82866410 FAX：0769-82866409 ShenZhen Zhongyi Technology Co.,Ltd. 03020800091 2025/11/27 SPECIFICATION FOR APPROVAL CUSTOMER`S NAME CUSTOMER`S P/N PRODUCT SPEC ISSUE DATE DONGGUAN BOHONG TECHNOLOGY CO., LTD Y.A11.371 PREPARED BYCHECKED BYAPPROVED BYCUSTOMER APPROVE 李蓓程杰李博文 ADD：No. 533, Fumin Middle Road, Dalang Town, Dongguan City, Guangdong Province *Please sign and return this approval sheet before placing the first production order for this model. Otherwise, it will be deemed that your company has accepted all contents herein by default* 工程部专用章 科 红 博 市 莞 东 技 有 限 公 司 DONGGUAN BOHONG TECHNOLOGY CO., LTD SPECIFICATION FOR APPROVAL A INITIAL2025/11/27 李蓓李博文 SPECIFICATION CONTROL DRAWING REVISIONS REVDESCRIPTIONDATEISSUE BYAPPROVAL BY CUSTOMERZhongyi CUSTOMER`S P/N03020800091 ISSUE DATE2025/11/27PRODUCT SPECY.A11.371 工程部专用章 科 红 博 市 莞 东 技 有 限 公 司 1.MATERIAL: NO DONGGUAN BOHONG TECHNOLOGY CO., LTD SPECIFICATION FOR APPROVAL Magnetic Core Solder Double-sided Tape High-temperature Tape Heat-shrink Tubing Wire MnZn-Ferrite G43.5*5.3*T0.5 LD/ / 1.5*1*45 KF/ [email protected]*24P JJY/ Sn99.3:Cu0.7 BTL/ 42*T0.1 DL/ 10*0.025 ZR 1 2 3 4 5 6 ISSUE DATE2025/11/27PRODUCT SPECY.A11.371 ITEMTYPESUPPLIERSUL FILE NO CUSTOMERZhongyi CUSTOMER`S P/N03020800091 工程部专用章 科 红 博 市 莞 东 技 有 限 公 司 2.DIMENSION： NOTES： 1.The coil must be centered and attached flat against the magnetic core without any lifting DONGGUAN BOHONG TECHNOLOGY CO., LTD SPECIFICATION FOR APPROVAL 程杰 4.Sleeve the two lead wires with a 1.5*1*45mm heat-shrink tubing. The tubing must be positioned flush against the edge of the ferrite core 李蓓李博文 ISSUECHECKAPPROVAL BYBYBY ISSUE DATE2025年11月27日PRODUCT SPECY.A11.371 2.The coil surface must be clean and free from contamination 3.Apply double-sided tape on the back, and ensure it has a pull tab CUSTOMERZhongyi CUSTOMER`S P/N03020800091 工程部专用章 科 红 博 市 莞 东 技 有 限 公 司 4.CIRCUIT DIAGRAM 5.WINDING NO N1 6.CHARACTERISTIC DONGGUAN BOHONG TECHNOLOGY CO., LTD SPECIFICATION FOR APPROVAL QS-F37 Min LCR1062 100KHz/1V AT 25°C±2°C DCRS-F90mΩ Max LCR1062 1KHz/0.3V AT 25°C±2°C ITEMMEASURED POINTTECHNICAL DATATESTING CONDITION & INSTRUMENT LSS-F6.5uH±5% LCR1062 100KHz/1V AT 25°C±2°C WINDINGWIRETURNSTAPEWINDING CONDITION S-FØ0.08*24*2P 10 / CCW CUSTOMERZhongyi CUSTOMER`S P/N03020800091 ISSUE DATE2025/11/27PRODUCT SPECY.A11.371 工程部专用章 科 红 博 市 莞 东 技 有 限 公 司 1 2 3 4 5 6 7 8 9 10 DONGGUAN BOHONG TECHNOLOGY CO., LTD SPECIFICATION FOR APPROVAL DispositionSignatureDate MEMO ContentNO CUSTOMERZhongyi CUSTOMER`S P/N03020800091 ISSUE DATE2025年11月27日PRODUCT SPECY.A11.371 工程部专用章 科 红 博 市 莞 东 技 有 限 公 司

ShenZhen Zhongyi Technology CO., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: February 2, 2026 Subject; Request for Confidentiality FCC ID: 2A9Q9-M2288Q To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Merry Yu Title: Manager

ShenZhen Zhongyi Technology CO., Ltd. Date: January 27, 2026 Product Model Number: M2288Q, QC2288BK, QC2288WT FCC ID: 2A9Q9-M2288Q To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following: • Testing • Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Merry Yu Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: 0755-89501773 On behalf of: ShenZhen Zhongyi Technology CO., Ltd.

ShenZhen Zhongyi Technology CO., Ltd. Model Difference Statement DATE: January 27, 2026 FCC ID: 2A9Q9-M2288Q Dear Sir/Madam, Added models QC2288BK, QC2288WT of the original product M2288Q The color of appearance and model name of series models listed are different from the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. Sincerely, Name: Merry Yu Title: Manager Company name: Iphoenix Technology Corp Address: Room 401, No.4 Road One, Shangxue Science and Technology City, Xinxue Community, Bantian Street, Longgang District, Shenzhen, China

Report No: SSP25120594-1E FCC ID: 2A9Q9-M2288Q Annex of Test Report Annex A. EUT External Photos M2288Q EUT View 1 EUT View 2 Report No: SSP25120594-1E FCC ID: 2A9Q9-M2288Q Annex of Test Report EUT View 3 EUT View 4 Report No: SSP25120594-1E FCC ID: 2A9Q9-M2288Q Annex of Test Report EUT View 5 EUT View 6 Report No: SSP25120594-1E FCC ID: 2A9Q9-M2288Q Annex of Test Report EUT View 7 EUT View 8 Report No: SSP25120594-1E FCC ID: 2A9Q9-M2288Q Annex of Test Report EUT View 9

Report No: SSP25120594-1E FCC ID: 2A9Q9-M2288Q Annex of Test Report Annex D. Label and Information FCC Label Sample FCC Labe Size: 3cm x 2cm FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location Label

Report No: SSP25120594-1E FCC ID: 2A9Q9-M2288Q Annex of Test Report Annex B. EUT Internal Photos EUT View 1 EUT View 2 Coil ANT1 Report No: SSP25120594-1E FCC ID: 2A9Q9-M2288Q Annex of Test Report EUT View 3 EUT View 4 Report No: SSP25120594-1E FCC ID: 2A9Q9-M2288Q Annex of Test Report EUT View 5 EUT View 6

Report No: SSP25120594-2H MPE Test Report Page 1 of 14 MPE Test Report FCC ID: 2A9Q9-M2288Q Report No. : SSP25120594-2H Applicant : ShenZhen Zhongyi Technology CO., Ltd. Product Name : 7700mAh Wireless Power Bank with TWS earphone Model Name : M2288Q Test Standard : FCC CFR 47 PART 1, 1.1310 Date of Issue : 2026-01-26 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP25120594-2H MPE Test Report Page 2 of 14 Test Report Basic Information Applicant..................................: ShenZhen Zhongyi Technology CO., Ltd. Address of Applicant...............: Room 401, No.4 Road One, Shangxue Science and Technology City, Xinxue Community, Bantian Street, Longgang District, Shenzhen, China Manufacturer..........................: ShenZhen Zhongyi Technology CO., Ltd. Address of Manufacturer........: Room 401, No.4 Road One, Shangxue Science and Technology City, Xinxue Community, Bantian Street, Longgang District, Shenzhen, China Product Name.........................: 7700mAh Wireless Power Bank with TWS earphone Brand Name.............................: - Main Model..............................: M2288Q Series Models..........................: QC2288BK, QC2288WT Test Standard..........................: FCC CFR 47 PART 1, 1.1310 KDB 680106 D01 Wireless Power Transfer v04 Date of Test .............................: 2026-01-04 to 2026-01-13 Test Result...............................: PASS Tested By ................................: (Colin Chen) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP25120594-2H MPE Test Report Page 3 of 14 CONTENTS 1. General Information .................................................................................................................................................... 5 1.1 Product Information ............................................................................................................................................. 5 1.2 Test Setup Information .......................................................................................................................................... 6 1.3 Test Facilities ........................................................................................................................................................ 7 1.4 List of Measurement Instruments .......................................................................................................................... 7 1.5 Measurement Uncertainty ..................................................................................................................................... 7 2. RF Exposure ................................................................................................................................................................. 8 2.1 Standard and Limit................................................................................................................................................ 8 2.2 Test Procedures .................................................................................................................................................... 8 2.3 Test Setup Block Diagram ...................................................................................................................................... 9 2.4 Test Data and Results .......................................................................................................................................... 10 Annex A. Test Photos ..................................................................................................................................................... 12 Report No: SSP25120594-2H MPE Test Report Page 4 of 14 Revision History Revision Issue Date Description Revised By V1.0 2026-01-26 Initial Release Lahm Peng Report No: SSP25120594-2H MPE Test Report Page 5 of 14 1. General Information 1.1 Product Information Product Name: 7700mAh Wireless Power Bank with TWS earphone Trade Name: - Test Model: M2288Q Series Models: QC2288BK, QC2288WT Rated Voltage: Battery Capacity: 7700mAh/3.85V/29.65Wh/Power Bank Battery Capacity: 30mAh/3.7V/0.11Wh/Earbuds Output For Power Case: 5V⎓0.2A Type-C Input: 5V⎓3A, 9V⎓2A, 12V⎓1.5A, 18W Max Type-C Output: 5V⎓3A, 9V⎓2.22A, 10V⎓2.25A, 12V⎓1.67A 22.5W Max Wireless Output: 5W, 7.5W, 10W, 15W TWS earphone: 3.7V by battery, USB charging Power Adapter: - Battery: DC 3.85V, 7700mAh Test Sample No: SSP25120594-1 Hardware Version: V1.0 Software Version: V1.0 Note 1: The test data is gathered from a production sample, provided by the manufacturer. Note 2: The color of appearance and model name of series models listed are different from the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. Wireless Specification Wireless Standard: WPC (QI) Operating Frequency: Wireless charging Output (Phone):110.5kHz-205kHz Modulation: FSK Antenna Gain: 0dBi Type of Antenna: Coil Antenna Type of Device: Portable Device Mobile Device Modular Device Report No: SSP25120594-2H MPE Test Report Page 6 of 14 1.2 Test Setup Information List of Test Modes Test Mode Description Remark TM1 Wireless charging 5W - TM2 Wireless charging 7.5W - TM3 Wireless charging 10W - TM4 Wireless charging 15W - TM5 Wireless charging 5W+Charging - Note 1: All modes above have been tested and only the worst mo…

Text truncated - open the document above for the full version.

Report No: SSP25120594-1E FCC Test Report Page 1 of 27 FCC TEST REPORT FCC ID: 2A9Q9-M2288Q Report No. : SSP25120594-1E Applicant : ShenZhen Zhongyi Technology CO., Ltd. Product Name : 7700mAh Wireless Power Bank with TWS earphone Model Name : M2288Q Test Standard : FCC Part 15 Subpart C Date of Issue : 2026-01-26 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP25120594-1E FCC Test Report Page 2 of 27 Test Report Basic Information Applicant..................................: ShenZhen Zhongyi Technology CO., Ltd. Address of Applicant...............: Room 401, No.4 Road One, Shangxue Science and Technology City, Xinxue Community, Bantian Street, Longgang District, Shenzhen, China Manufacturer..........................: ShenZhen Zhongyi Technology CO., Ltd. Address of Manufacturer........: Room 401, No.4 Road One, Shangxue Science and Technology City, Xinxue Community, Bantian Street, Longgang District, Shenzhen, China Product Name.........................: 7700mAh Wireless Power Bank with TWS earphone Brand Name.............................: - Main Model..............................: M2288Q Series Models..........................: QC2288BK, QC2288WT Test Standard..........................: FCC Part 15 Subpart C ANSI C63.4-2014 ANSI C63.10-2020 Date of Test .............................: 2026-01-04 to 2026-01-13 Test Result...............................: PASS Tested By ................................: (Colin Chen) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP25120594-1E FCC Test Report Page 3 of 27 CONTENTS 1. General Information .................................................................................................................................................... 5 1.1 Product Information ............................................................................................................................................. 5 1.2 Test Setup Information .......................................................................................................................................... 6 1.3 Compliance Standards ........................................................................................................................................... 7 1.4 Test Facilities ........................................................................................................................................................ 7 1.5 List of Measurement Instruments .......................................................................................................................... 8 1.6 Measurement Uncertainty ..................................................................................................................................... 8 2. Summary of Test Results ............................................................................................................................................. 9 3. Antenna Requirement ............................................................................................................................................... 10 3.1 Standard and Limit.............................................................................................................................................. 10 3.2 Test Result .......................................................................................................................................................... 10 4. Conducted Emissions ................................................................................................................................................ 11 4.1 Standard and Limit.............................................................................................................................................. 11 4.2 Test Procedure.................................................................................................................................................... 11 4.3 Test Data and Results .......................................................................................................................................... 12 5. Radiated Emissions ................................................................................................................................................... 15 5.1 Standard and Limit.............................................................................................................................................. 15 5.2 Test Procedure.................................................................................................................................................... 15 5.3 Test Data and Results .......................................................................................................................................... 17 6. Occupied Bandwidth ................................................................................................................................................. 26 6.1 Standard and Limit.............................................................................................................................................. 26 6.2 Test Procedure.................................................................................................................................................... 26 6.3 Test Data and Results ...............…

Text truncated - open the document above for the full version.

Report No: SSP25120594-1E FCC ID: 2A9Q9-M2288Q Annex of Test Report Annex C. Test Photos Conducted Emission Test View 1 Radiated Emission Test View 1 Report No: SSP25120594-1E FCC ID: 2A9Q9-M2288Q Annex of Test Report Radiated Emission Test View 2 Radiated Emission Test View 3 Report No: SSP25120594-1E FCC ID: 2A9Q9-M2288Q Annex of Test Report Radiated Emission Test View 4