2AA5WKMP7R2BCAterm MR10LN

PA-MR10LN Bottom Top FCCID:2AA5WKMP7R2BC

PA-MR10LN Instruction Manual 2 Contents Contents ......................................................................................... 2 Important Product Information ....................................................... 3 Safety Instructions ......................................................................... 5 Notice ............................................................................................. 9 1. Package Contents ................................................................. 12 2. Part Names and Functions .................................................... 13 3. Using nanoSIM ...................................................................... 14 4. Charging the Battery Pack .................................................... 15 5. Network Setup ....................................................................... 16 6. Web Setting ........................................................................... 17 7. Products Specifications ......................................................... 19 Windows® and Windows 10® are registered trademarks of Microsoft Corporation in the United States and other countries. Windows 10® is an operating system. Copyright© NEC Platforms, Ltd. 2021 3 Important Product Information Important safety information regarding radio frequency (RF) exposure and use when worn The product “MR10LN”is declared to conform with the essential requirements of European Union Directive 2014/53/EC RE Directive . This wireless portable device complies with the EU requirements for exposure to radio waves. Your wireless portable device is a radio transceiver and receiver. It is designed not to exceed the SAR*(Specific Absorption Rate) limits** for exposure to radiofrequency (RF) energy by European Union Directives. The Max. SAR* value is 1.23W/kg (10 g) when it is worn on the body. To comply with the RF Exposure limits For body-worn operating conditions please use belt-clips, holsters, and/or accessories that have no metallic component in the assembly and must provide at least 0.5cm separation between the device and the user's body. * The exposure standard for wireless portable devices employs a unit of measurement known as the Specific Absorption Rate, or SAR. ** The SAR limit recommended by the International Commission on Non-Ionizing Radiation Protection (ICNIRP) is 2W/kg averaged over 10g of tissue. *** Tests for SAR have been conducted using standard operating positions with the transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the wireless portable device while operating can be well below the maximum value. This is because the wireless portable device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a base station antenna, the lower the power output. We, NEC Platforms, Ltd. hereby, declare that the residential gateway model PA-MR10LN is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EC. RE Directive 4 Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 5 mm must be maintained between the user’s body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. 5 Safety Instructions Please read these Safety Instructions carefully before using this product. These Safety Instructions show items that must be followed to prevent danger to any person and damage to property. Alert symbols below are important to fully understand these Safety Instructions. Alert symbols in this instruction manual Warning ： Indicates a hazardous situation which could result in death or serious injury. Caution ： Indicates a situation which could result in minor injury or physical damage. Other alert symbols Battery ●Do not get any metal objects such as wire come into contact with the battery terminal. Do not carry or store the terminal together with any metal objects such as a necklace. Ignition, explosion, overheating or leakage of the battery pack may result. ■ Warnings and cautions Flammable Electric shock High Temperature ■ Prohibited actions General No disassembly No water No wet hands No naked flames Warning 6 ●Do not throw the product into fire. Ignition, explosion, overheating or leakage of the battery may result. ●Do not pierce the product with a nail, hit it with a hammer or step on it. Ignition, explosion, overheating or leakage of the battery may result. ●If the battery fluid gets into your eyes, immediately flush with clean water and consult a doctor. Do not rub the eyes. Otherwise, blindness may result. ●If the battery leaks or emits unusual odor, immediately stop using the terminal and keep away from the open fire. Otherwise, the leaked battery fluid may ignite, resulting in fire or burst. ●Be careful not to let your pets bite the product. Otherwise, Ignition, explosion, overheating or leakage of the battery may result. CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS In these cases ●Do not dispose of old batteries with ordinary household waste. Ignition or environmental damage may result. Cover the battery terminals with a non-conductive tape and dispose of them in accordance with local waste Warning Caution Warning 7 disposal regulations. ●Do not use or charge a wet product. Ignition, explosion, overheating or leakage of the battery may result. ●If the liquid inside the battery leaks out, keep the liquid away from your skin such as face or hands. Otherwise, blindness or injury to your …

Text truncated - open the document above for the full version.

2-3, tsukasa-machi, kanda, chiyoda-ku, Tokyo 101-8532 Japan TEL: +81-4-7185-7465 FAX: +81-4-7185-7993 Date: 2021-01-19 FCC ID: 2AA5WKMP7R2BC FCC E-Label Information: 1. According to FCC rule part 2.925 (d) justification of using the alternative method of e-labeling for the product When etched on the surface, the labeling may cause damage or require very expensive techniques. 2. According to KDB 784748 D02 e labeling v02 section 4, for devices with an integrated electronic display, or those devices that only operate in conjunction with another associated product that has an electronic display, below info has been stated in e-label and/or user manual. A. User Steps to Access Information Starting from Home Menu: Step 1 – accessing submenu (“Information”) Step 2 – access submenu (“Legal Information”) ,and regulatory information is displayed. B. Products must not require special accessories or supplemental plug-ins (e.g., the installation of a SIM/USIM card) to access the information. The information is stored on the device, and no special codes/accessories or supplemental plug-ins (e.g., a SIM/USIM card) are required to access the information. Instructions will be provided with the product at the time of purchase, in the user manual. End user can access to product-related website, a reference (URL) to obtain the website information is provided at the time of purchase in the user manual, packaging material, etc. Readability of Regulatory Information Information on E-label In Manual FCC ID number Yes No FCC logo No No 15.19 statement (“This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”) No Yes Class A / B Digital Device user manual statements No Yes Caution to the user that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment No Yes Above info which displayed electronically is clearly legible no need to aid of magnification, please see below e-label screen. C. Regulatory Information must be Secure The regulatory information and dedicated exclusive application(s) or script(s) will be secured and implemented in a factory-set-unalterable format. The regulatory information will be capable of being retrieved and displayed locally and access by the end user. The info is no way to modify by end user. D. Physical and Temporary label for Purchasing and Importation Although the e-label has been used, the FCC ID will also be printed directly on the product packaging, so that the product can be identified at the time of importation, marketing, and sales. E. Additional Considerations(Modular transmitters) Device is not a modular device. ----------------------------------------------- Mitsuru Ohya, Senior manager NEC Platforms, Ltd. Tel: +81-4-7185-7465 Fax: +81-4-7185-7993 E-mail: [email protected] Mitsuru Ohya

2-3, tsukasa-machi, kanda, chiyoda-ku, Tokyo 101-8532 Japan TEL: +81-4-7185-7465 FAX: +81-4-7185-7993 Date: 2021-01-08 FCC ID: 2AA5WKMP7R2BC To the attention of Federal Communications Commission Authorization and Evaluation Division Permanent Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this Application as outlined below: Schematics Block Diagram Operational Description Part list Tune-up Procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely yours, ----------------------------------------------- Mitsuru Ohya, Senior manager NEC Platforms, Ltd. Tel: +81-4-7185-7465 Fax: +81-4-7185-7993 E-mail: [email protected] Mitsuru Ohya

2-3, tsukasa-machi, kanda, chiyoda-ku, Tokyo 101-8532 Japan TEL: +81-4-7185-7465 FAX: +81-4-7185-7993 Date: 2021-01-08 FCC ID: 2AA5WKMP7R2BC A U T H O R I Z A T I O N L E T T E R To Whom It May Concern: NEC Platforms, Ltd. hereby authorizes Andrea Hsia / Supervisor of Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch (“BV CPS Taoyuan”), to act on its behalf in all matters relating to the Federal Communication Commission (“FCC”) application for equipment authorization in connection with the FCC ID listed above, including signing of all documents relating to these matters. Any and all acts carried out by Andrea Hsia / Supervisor of BV CPS Taoyuan on NEC Platforms, Ltd.’s behalf, within the scope of the powers granted herein, shall have the same effect as acts of its own. If you have any questions regarding the authorization, please don’t hesitate to contact us. Sincerely yours, ----------------------------------------------- Mitsuru Ohya, Senior manager NEC Platforms, Ltd. Tel: +81-4-7185-7465 Fax: +81-4-7185-7993 E-mail: [email protected] Mitsuru Ohya

Reference No.: 201007C02 Page No. 1 / 5 CONSTRUCTION PHOTOS OF EUT Reference No.: 201007C02 Page No. 2 / 5 Reference No.: 201007C02 Page No. 3 / 5 Reference No.: 201007C02 Page No. 4 / 5 Reference No.: 201007C02 Page No. 5 / 5

PA-MR10LN How to access e-label Starting from Home Menu: Step 1 –accessing submenu (“Information”) Step 2 –access submenu (“Legal Information”) ,and regulatory information is displayed. PA-MR10LN Model name IMEI S/N PA-MR10LN *************** ************** ID WebPW SSID Key MAC admin ******** aterm- ************* **:**:**:**:**: For Wi-Fi Product name Aterm MR10LN ****** ** ************ Model name IMEI S/N PA-MR10LN *************** ************** ID WebPW SSID Key MAC admin ******** aterm- ************* **:**:**:**:**: For Wi-Fi Product name Aterm MR10LN ****** ** ************

Reference No.: 201007C02 Page No. 1 / 8 CONSTRUCTION PHOTOS OF EUT Reference No.: 201007C02 Page No. 2 / 8 Reference No.: 201007C02 Page No. 3 / 8 Reference No.: 201007C02 Page No. 4 / 8 Reference No.: 201007C02 Page No. 5 / 8 Reference No.: 201007C02 Page No. 6 / 8 Reference No.: 201007C02 Page No. 7 / 8 Reference No.: 201007C02 Page No. 8 / 8

SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 32 Report No. : SF201007C02 Issued Date : Dec. 07, 2020 SAR Test Report Report No. : SF201007C02 Applicant : NEC Platforms, Ltd. Address : 2-3, tsukasa-machi, kanda, chiyoda-ku, Tokyo 101-8532 Japan Product : Aterm MR10LN FCC ID : 2AA5WKMP7R2BC Brand : NEC Model No. : PA-MR10LN Standards : FCC 47 CFR Part 2 (2.1093), IEEE C95.1:1992, IEEE Std 1528:2013 KDB 865664 D01 v01r04, KDB 865664 D02 v01r02 KDB 248227 D01 v02r02, KDB 447498 D01 v06 KDB 941225 D01 v03r01, KDB 941225 D05 v02r05 Sample Received Date : Oct. 07, 2020 Date of Testing : Oct. 22, 2020 ~ Nov. 16, 2020 Lab Address : No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location : No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City, Taiwan CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch–Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Shelly Hsueh / Specialist Approved By : Gordon Lin / Manager FCC Accredited No.: TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 32 Report No. : SF201007C02 Issued Date : Dec. 07, 2020 Table of Contents Release Control Record ............................................................................................................................................................... 3 1.Summary of Maximum SAR Value ....................................................................................................................................... 4 2.Description of Equipment Under Test ................................................................................................................................. 5 3.SAR Measurement System ................................................................................................................................................... 6 3.1Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2SPEAG DASY6 System ............................................................................................................................................... 6 3.2.1 Robot ............................................................................................................................................................... 7 3.2.2 Probes ............................................................................................................................................................. 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................. 8 3.2.4 Phantoms ......................................................................................................................................................... 8 3.2.5 Device Holder .................................................................................................................................................. 9 3.2.6 System Validation Dipoles ............................................................................................................................. 10 3.2.7 Power Source ................................................................................................................................................ 10 3.2.8 Tissue Simulating Liquids .............................................................................................................................. 11 3.3SAR System Verification ............................................................................................................................................ 13 3.4SAR Measurement Procedure ................................................................................................................................... 14 3.4. 1 Area Scan and Zoom Scan Procedure .......................................................................................................... 14 3.4.2 Volume Scan Procedure ................................................................................................................................ 15 3.4.3 Power Drift …

Text truncated - open the document above for the full version.

SAR Test Report Report Format Version 5.0.0 Issued Date : Dec. 07, 2020 Report No. : SF201007C02 Appendix D. Photographs of EUT and Setup The setup photographs for SAR testing are shown as follows. SAR Test Report Report Format Version 5.0.0 Issued Date : Dec. 07, 2020 Report No. : SF201007C02 Appendix E. Maximum Target Conducted Power The maximum conducted average power (Unit: dBm) including tune-up tolerance is shown as below. Target Power Maximum Target Power Maximum Target Power WCDMA Band II19 20.020.0 WCDMA Band IV18.5 19.519.5 WCDMA Band V23 24.024.0 Target Power Maximum Target Power Maximum Target Power LTE 22020.019.0 LTE 42121.020.0 LTE 52323.022.0 LTE 262323.022.0 WCDMA Max. Tune-up Power (Full) LTE Max. Tune-up Power (Full) Mode QPSK Mode RMC 12.2K 16QAM HSDPA DC-HSDPA HSUPA ModeChannel Frequency MAX. Tune- up 1241216.0 6243716.0 11246216.0 1241214.0 6243714.0 11246214.0 1241214.0 6243714.0 11246214.0 3242214.0 6243714.0 9245214.0 10245714.0 11246214.0 802.11n HT20 802.11g 802.11b WLAN2.4GHz 802.11n HT40 SAR Test Report Report Format Version 5.0.0 Issued Date : Dec. 07, 2020 Report No. : SF201007C02 Appendix F. Measured Conducted Power Result The measuring conducted power (Unit: dBm) are shown as below. Band TX Channel9262 9400 9538 1312 1413 1513 4132 4182 4233 Rx Channel9662 9800 9938 1537 1638 1738 4357 4407 4458 Frequency1852.4 1880 1907.6 1712.4 1732.6 1752.6 826.4 836.4 846.6 RMC 12.2K19.8619.9619.77 19.4519.4919.4423.3323.19 23.08 HSDPA Subtest-118.44 18.44 18.33 18.36 18.44 18.49 22.28 22.23 22.09 HSDPA Subtest-218.45 18.50 18.40 18.13 18.15 18.19 22.29 22.24 22.10 HSDPA Subtest-317.93 17.96 17.88 17.80 17.93 17.96 21.78 21.73 21.59 HSDPA Subtest-417.94 17.93 17.86 17.94 18.03 18.07 21.76 21.71 21.57 HSUPA Subtest-118.05 18.04 18.01 18.02 18.09 18.10 22.08 22.01 22.09 HSUPA Subtest-216.85 16.87 16.77 17.48 17.41 17.40 20.73 20.68 20.54 HSUPA Subtest-317.06 17.10 17.09 17.08 17.09 17.19 21.01 21.08 21.04 HSUPA Subtest-417.09 17.03 17.01 17.41 17.42 17.48 21.08 21.03 20.89 HSUPA Subtest-518.40 18.34 18.32 18.44 18.51 18.55 22.30 22.25 22.11 WCDMA IIWCDMA VWCDMA IV WCDMA Conducted Power (Full) RB SizeRB OffsetLowMidHigh 187001890019100 186018801900 1019.9619.8319.51 15019.8219.8119.75 19919.6419.6919.71 50018.9418.9318.91 502518.8518.9118.91 505018.7918.8018.81 100018.8218.8118.78 1018.8518.8118.82 15018.7718.7718.70 19918.5218.5118.56 50017.8817.9617.89 502517.8017.8917.77 505017.7217.7417.73 100017.9317.9017.94 186751890019125 1857.518801902.5 1019.8019.8319.46 13719.7719.8319.72 17419.6819.7019.72 36018.9518.9818.86 361918.8418.8918.93 363918.8018.7618.74 75018.8318.8118.76 1018.7918.8218.76 13718.7518.7618.80 17418.5718.5818.50 36017.8417.8817.89 361917.8517.8017.79 363917.7317.7717.73 75017.8917.9517.85 MCS Index LTE Conducted Power (Full) BWChannel Frequence (MHz) MCS Index QPSK 16QAM QPSK 16QAM Channel Frequence (MHz) LTE Band 2 20M 20M 15M 15M BW LTE Conducted Power (Full) LTE Band 2 186501890019150 185518801905 1019.7619.8119.43 12419.7719.7519.80 14919.6619.7219.73 25018.9618.9418.94 251218.8618.9318.87 252518.8218.7918.81 50018.7618.7718.76 1018.7918.7918.75 12418.7418.7318.77 14918.5118.6018.54 25017.8717.9517.91 251217.7717.8917.79 252517.6817.7317.74 50017.9517.8917.92 186251890019175 1852.518801907.5 1019.8219.8519.42 11219.7719.8119.74 12419.6519.7519.68 12018.9618.9918.94 12618.8518.9718.85 121318.7818.7918.76 25018.8018.8318.80 1018.7618.8518.75 11218.7618.7918.79 12418.5218.6118.56 12017.8617.8717.90 12617.8717.8217.84 121317.7317.8017.67 25017.9317.8917.89 BW MCS Index BW MCS Index Channel QPSK 16QAM Channel Frequence (MHz) QPSK 16QAM 10M 10M 5M 5M Frequence (MHz) LTE Conducted Power (Full) LTE Band 2 186151890019185 1851.518801908.5 1019.7319.7719.47 1719.7419.7919.78 11419.6319.7419.72 8018.9118.9718.90 8318.8618.9618.88 8718.8118.7818.75 15018.7918.8618.83 1018.8118.8218.85 1718.7818.8218.78 11418.4918.5818.54 8017.8917.9117.94 8317.8517.8617.80 8717.7717.7017.70 15017.8617.9717.92 186071890019193 1850.718801909.3 1019.8119.7819.46 1219.7319.8219.74 1519.6419.7519.72 3018.9218.9118.87 3118.9318.8818.90 3318.7918.8318.82 6018.8118.8718.81 1018.8218.8018.83 1218.7318.7718.72 1518.4818.6118.56 3017.8617.9417.84 3117.8417.8617.79 3317.7717.7517.73 6017.9117.9617.89 BW MCS Index Channel Frequence (MHz) BW MCS Index 3M 3M 1.4M Channel Frequence (MHz) QPSK 16QAM QPSK 16QAM 1.4M RB SizeRB OffsetLowMidHigh 200502017520300 17201732.51745 1020.8120.7620.83 15020.5120.6320.73 19920.5220.5520.66 50019.4919.6819.71 502519.4619.5619.69 505019.3619.4819.59 100019.6319.7219.79 1019.2919.4219.51 15019.3319.4119.44 19919.1019.1319.26 50018.5918.6418.72 502518.5318.7118.78 505018.5118.5218.64 100018.5018.5918.68 200252017520325 1717.51732.51747.5 1020.6120.6720.82 13720.5620.6820.71 17420.4620.5620.61 36019.5919.6119.73 361919.4319.5919.67 363919.3619.4519.59 75019.6119.6619.76 1019.2619.3619.42 13719.2519.3719.48 17419.0519.1519.22 36018.6318.6518.76 361918.6218.6118.77 363918.4518.6118.64 75018.5218.5718.73 LTE Conducted Power (Full) QPSK 16QAM BW MCS Index Channel Frequence (MHz) QPSK 16QAM BWChannel Frequence (MHz) 20M 20M MCS Index LTE Band 4 15M 15M LTE Conducted Power (Full) LTE Band 4 200002017520350 17151732.51750 1020.6020.6620.80 12420.5120.6420.74 14920.5320.5420.61 25019.5719.6519.67 251219.5219.5719.66 252519.4319.5019.58 50019.5919.7119.79 1019.2619.4219.44 12419.3419.4019.45 14919.1119.1019.18 25018.5818.6318.80 251218.6218.6618.77 252518.4618.5918.60 50018.5018.5618.67 199752017520375 1712.51732.51752.5 1020.5720.7320.75 11220.5320.6120.71 12420.4620.6320.64 12019.5419.6119.70 12619.4519.5319.68 121319.4619.4519.59 25019.6019.6419.71 1019.3219.3919.44 11219.2719.3719.46 12419.0119.1019.26 12018.6418.6718.80 12618.5618.6118.72 121318.5018.5918.67 25018.5518.6018.65 Channel Frequence (MHz) QPSK 16QAM Frequence (MHz) QPSK 16QAM BW MCS Index Channel MCS Index 10M 10M 5M 5M BW LTE Conducted Power (Full) LTE Band 4 199652017520385 1711.51732.51753.5 1020.61…

Text truncated - open the document above for the full version.

Report No.: RF201007C02-1 Page No. 1 / 110 Report Format Version: 6.1.1 FCC Test Report (Part 22) Report No.: RF201007C02-1 FCC ID: 2AA5WKMP7R2BC Test Model: PA-MR10LN Received Date: Oct. 07, 2020 Test Date: Oct. 17 ~ Dec. 30, 2020 Issued Date: Dec. 30, 2020 Applicant: NEC Platforms, Ltd. Address: 2-3, tsukasa-machi, kanda, chiyoda-ku, Tokyo 101-8532 Japan Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RF201007C02-1 Page No. 2 / 110 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Test Site and Instruments .................................................................................................................... 7 3 General Information .............................................................................................................................. 8 3.1 General Description of EUT ................................................................................................................ 8 3.2 Configuration of System under Test .................................................................................................. 10 3.2.1 Description of Support Units .............................................................................................................. 10 3.3 Test Mode Applicability and Tested Channel Detail ........................................................................... 11 3.4 EUT Operating Conditions ................................................................................................................ 18 3.5 General Description of Applied Standards and References ............................................................. 18 4 Test Types and Results ...................................................................................................................... 19 4.1 Output Power Measurement ............................................................................................................. 19 4.1.1 Limits of Output Power Measurement ............................................................................................... 19 4.1.2 Test Procedures ................................................................................................................................. 19 4.1.3 Test Setup .......................................................................................................................................... 19 4.1.4 Test Results ....................................................................................................................................... 20 4.2 Modulation Characteristics Measurement ......................................................................................... 32 4.2.1 Limits of Modulation Characteristics .................................................................................................. 32 4.2.2 Test Procedure .................................................................................................................................. 32 4.2.3 Test Setup .......................................................................................................................................... 32 4.2.4 Test Results ....................................................................................................................................... 33 4.3 Frequency Stability Measurement ..........................................…

Text truncated - open the document above for the full version.