2AA5WPAMR03LNPA MR03LN

Aterm MR03LN Instruction Manual 2 Contents Contents ........................................................................................ 2 Important Product Information ....................................................... 3 Safety Instructions ......................................................................... 4 Notice ............................................................................................ 8 1. Package Contents ................................................................. 11 3. Part Names and Functions ................................................... 12 4. Using microSIM .................................................................... 14 5. Attaching and Detaching the Battery Pack ........................... 15 6. Network Setup ...................................................................... 16 7. Web Setting .......................................................................... 17 8. Products Specifications ........................................................ 19 Windows® and Windows 7® are registered trademarks of Microsoft Corporation in the United States and other countries. Windows 7® is an operating system. Copyright© NEC AccessTechnica, Ltd. 2013 3 Important Product Information Important safety information regarding radio frequency (RF) exposure and use when worn The product “MR03LN”is declared to conform with the essential requirements of European Union Directive 1999/5/EC Radio and Telecommunications Terminal Equipment Directive 3.1(a), 3.1(b) and 3.2. This wireless portable device complies with the EU requirements for exposure to radio waves. Your wireless portable device is a radio transceiver and receiver. It is designed not to exceed the SAR*(Specifc Absorption Rate) limits** for exposure to radiofrequency (RF) energy by European Union Directives. The Max. SAR* value is 1.04W/kg (10 g) when it is worn on the body. To comply with the RF Exposure limits a distance of greater than 1.5cm must be maintained from the user's body. While there may be differences between the SAR* levels of various wireless portable devices and at various positions, they all meet*** the EU requirements for RF exposure. * The exposure standard for wireless portable devices employs a unit of measurement known as the Specifc Absorption Rate, or SAR. ** The SAR limit recommended by the International Commission on Non@Ionizing Radiation Protection (ICNIRP) is 2W/kg averaged over 10g of tissue. *** Tests for SAR have been conducted using standard operating positions with the transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the wireless portable device while operating can be well below the maximum value. This is because the wireless portable device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a base station antenna, the lower the power output. We, NEC AccessTechnica, Ltd. hereby, declare that the residential gateway model MR03LN is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. 4 Safety Instructions Please read these Safety Instructions carefully before using this product. These Safety Instructions show items that must be followed to prevent danger to any person and damage to property. Alert symbols below are important to fully understand these Safety Instructions. Alert symbols in this instruction manual Warning ： Indicates a hazardous situation which could result in death or serious injury. Caution ： Indicates a situation which could result in minor injury or physical damage. Other alert symbols Battery ●Do not get any metal objects such as wire come into contact with the battery terminal. Do not carry or store the terminal together with any metal objects such as a necklace. Ignition, explosion, overheating or leakage of the battery pack may result. ■ Warnings and cautions Flammable Electric shock High Temperature ■ Prohibited actions General No disassembly No water No wet hands No naked flames Warning 5 ●Do not attach the battery pack forcibly if you are having trouble attaching it. When attaching the battery pack, check the direction of the battery pack. Ignition, explosion, overheating or leakage of the battery pack may result. ●Do not throw the battery pack into fire. Ignition, explosion, overheating or leakage of the battery pack may result. ●Do not pierce the battery pack with a nail, hit it with a hammer or step on it. Ignition, explosion, overheating or leakage of the battery pack may result. ●If the battery fluid gets into your eyes, immediately flush with clean water and consult a doctor. Do not rub the eyes. Otherwise, blindness may result. ●If you find any trouble on the battery pack such as distortion caused by a drop or scratches, never use the battery pack. Ignition, explosion, overheating or leakage of the battery pack may result. ●If the battery leaks or emits unusual odor, immediately sto p using the terminal and keep away from the open fire. Otherwise, the leaked battery fluid may ignite, resulting in fire or burst. ●Be careful not to let your pets bite the battery pack. Otherwise, Ignition, explosion, overheating or leakage of the battery pack may result. Warning 6 In these cases ●Do not dispose of old batteries with ordinary household waste. Ignition or environmental damage may result. Cover the battery terminals with a non@conductive tape and dispose of them in accordance with local waste disposal regulations. ●Do not use or charge a wet battery pack. Ignition, explosion, overheating or leakage of the battery pack may result. ●If the liquid inside the battery pack leaks out, keep the liquid away from your skin such as face or hands. Otherwise, blindness or injury to your skin may result. If the liquid gets into your eyes or mouth, or attaches to your skin or …

Text truncated - open the document above for the full version.

Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch 香港商立德國際商品試驗有限公司 桃園分公司 No. 19, Hwa Ya 2nd Rd., Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 33383, Taiwan TEL: 886-3-3183232 FAX: 886-3-3270892 http://www.adt.com.tw / E-mail: [email protected] Date: 2014-01-21 Re: Supersede request for FCC ID: 2AA5WPAMR03LN; Granted on 01/20/2014 To Whom It May Concern: We regret to inform you that due to type model no., we have submitted the wrong RF Exposure Info (SAR)-1_rev exhibit to the filing. To prevent misunderstanding to the public, we would like to request the FCC to supersede the exhibit described as RF Exposure Info (SAR)-1_rev 2. If you have any questions, feel free to contact us. Thank you. Regards, Andrea Hsia Specialist Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Tel: 886-3-318 3232 ext. 1628 Fax: 886-3-327 0892 Email: [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

NEC Design & Promotion Ltd. ******-g ************* ***********0 ******-g ************* ***********0

Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12

Report No.: SA131024C22 1 of 6 Report Format Version 5.0.0 RF EXPOSURE REPORT REPORT NO.: SA131024C22 MODEL NO.: PA-MR03LN FCC ID: 2AA5WPAMR03LN RECEIVED: Oct. 24, 2013 TESTED: Dec. 14 ~ Dec. 29, 2013 ISSUED: Jan. 14, 2014 APPLICANT: NEC Access Technica, Ltd. ADDRESS: 800, Shimomata, Kakegawa-shi, Shizuoka 436-8501, Japan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by any government agencies. Report No.: SA131024C22 2 of 6 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................ 3 1. CERTIFICATION ............................................................................................................. 4 2. RF EXPOSURE ............................................................................................................... 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) ......................................... 5 2.2 MPE CALCULATION FORMULA .................................................................................... 5 2.3 CLASSIFICATION ........................................................................................................... 5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER .................................. 6 Report No.: SA131024C22 3 of 6 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA131024C22 Original release. Jan. 14, 2014 Report No.: SA131024C22 4 of 6 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: PA MR03LN MODEL: PA-MR03LN BRAND: NEC APPLICANT: NEC Access Technica, Ltd. TESTED: Dec. 14 ~ Dec. 29, 2013 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment (Model: PA-MR03LN) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE : Jan. 14, 2014 Pettie Chen / Senior Specialist APPROVED BY : , DATE : Jan. 14, 2014 Ken Liu / Senior Manager Report No.: SA131024C22 5 of 6 Report Format Version 5.0.0 2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA131024C22 6 of 6 Report Format Version 5.0.0 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) MAX POWER (dBm) ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 24.78 -3.06 20 0.03 1 NOTE: Directional gain =10 log[(10 G1 /20 + 10 G2 /20 + ... + 10 GN /20 ) 2 /N ANT ]= -3.06 FREQUENCY BAND (MHz) ERP (dBm)EIRP (dBm) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) GPRS 824.2 ~ 848.8MHz 28.55 30.70 20 0.234 0.549 WCDMA 826.4 ~ 846.6MHz 20.27 22.42 20 0.035 0.551 NOTE: ERP=EIRP-2.15 FREQUENCY BAND (MHz) EIRP (dBm) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) GPRS 1851.25~1908.75 MHz 28.46 20 0.140 1 CONCULSION: Both of the WLAN 2.4G & LTE can transmit simultaneously, the formula of calculated the MPE is: CPD1 / LPD1 + CPD2 / LPD2 + ......etc. < 1 CPD = Calculation power density LPD = Limit of power density WLAN 2.4G + GPRS 850 = 0.03/1 + 0.234/0.549 = 0.456 Therefore, the maximum calculation of this situation is 0.456, which is less than the “1” limit. ---END---

FCC SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 28 Report No. : SA131024C22-1 Issued Date : Jan. 16, 2014 Revision : R01 FCC SAR Test Report Report No. : SA131024C22-1 Applicant : NEC Access Technica, Ltd. Address : 800, Shimomata, Kakegawa-shi, Shizuoka 436-8501, Japan Product : PA MR03LN FCC ID : 2AA5WPAMR03LN Brand : NEC Model No. : PA-MR03LN Standards : FCC 47 CFR Part 2 (2.1093) / IEEE C95.1:1992 / IEEE 1528:2003 IEEE 1528a-2005 / KDB 865664 D01 v01r02 / KDB 248227 D01 v01r02 KDB 447498 D01 v05r01 / KDB 616217 D04 v01r01 / KDB 941225 D01 v02 KDB 941225 D02 v02r02 / KDB 941225 D03 v01 Sample Received Date : Oct. 24, 2013 Date of Testing : Jan. 09, 2014 ~ Jan. 14, 2014 CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch – Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Vera Huang / Specialist Approved By : Roy Wu / Manager This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. FCC SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 28 Report No. : SA131024C22-1 Issued Date : Jan. 16, 2014 Revision : R01 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 6 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 6 3.2 SPEAG DASY System ................................................................................................................................................. 6 3.2.1 Robot .................................................................................................................................................................. 7 3.2.2 Probes ................................................................................................................................................................ 8 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................... 8 3.2.4 Phantoms ........................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................... 10 3.2.6 System Validation Dipoles ................................................................................................................................ 10 3.2.7 Tissue Simulating Liquids ................................................................................................................................. 11 3.3 SAR System Verification ............................................................................................................................................ 14 3.4 SAR Measurement Procedure ................................................................................................................................... 15 3.4.1 Area & Zoom Scan Procedure ......................................................................................................................... 15 3.4.2 Volume Scan Procedure ................................................................................................................................... 15 3.4.3 Power Drift Monitoring ...................................................................................................................................... 16 3.4.4 Spatial Peak SAR Evaluation ..........................................................................…

Text truncated - open the document above for the full version.

Report No.: RF131024C22-3 1 of 41 Report Format Version 5.0.0 FCC TEST REPORT (CO-LOCATED) REPORT NO.: RF131024C22-3 MODEL NO.: PA-MR03LN FCC ID: 2AA5WPAMR03LN RECEIVED: Oct. 24, 2013 TESTED: Dec. 29, 2013 ISSUED: Jan. 13, 2014 APPLICANT: NEC Access Technica, Ltd. ADDRESS: 800, Shimomata, Kakegawa-shi, Shizuoka 436-8501, Japan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF131024C22-3 2 of 41 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD .......................................................................................... 3 1. CERTIFICATION ................................................................................................ 4 2. SUMMARY OF TEST RESULTS ....................................................................... 5 2.1 MEASUREMENT UNCERTAINTY ..................................................................... 5 3. GENERAL INFORMATION ................................................................................ 6 3.1 GENERAL DESCRIPTION OF EUT .................................................................. 6 3.2 DESCRIPTION OF TEST MODES .................................................................... 7 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .................... 9 3.3 DESCRIPTION OF SUPPORT UNITS ............................................................ 11 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ............................................. 12 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ................................. 13 4. TEST TYPES AND RESULTS ......................................................................... 14 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT .......................... 14 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ....... 14 4.1.2 LIMITS OF UNWANTED EMISSION OUT OF THE RESTRICTED BANDS ... 14 4.1.3 TEST INSTRUMENTS ..................................................................................... 15 4.1.4 TEST PROCEDURES ..................................................................................... 16 4.1.5 DEVIATION FROM TEST STANDARD ............................................................ 16 4.1.6 TEST SETUP ................................................................................................... 17 4.1.7 EUT OPERATING CONDITIONS .................................................................... 17 4.1.8 TEST RESULTS .............................................................................................. 18 4.2 CONDUCTED EMISSION MEASUREMENT .................................................. 30 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ................................ 30 4.2.2 TEST INSTRUMENTS ..................................................................................... 30 4.2.3 TEST PROCEDURES ..................................................................................... 31 4.2.4 DEVIATION FROM TEST STANDARD ............................................................ 31 4.2.5 TEST SETUP ................................................................................................... 32 4.2.6 EUT OPERATING CONDITIONS .................................................................... 32 4.2.7 TEST RESULTS .............................................................................................. 33 5. PHOTOGRAPHS OF THE TEST CONFIGURATION ...................................... 39 6. INFORMATION ON THE TESTING LABORATORIES .................................... 40 7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB ........................................................... 41 Report No.: RF131024C22-3 3 of 41 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF131024C22-3 Original release Jan. 13, 2014 Report No.: RF131024C22-3 4 of 41 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: PA MR03LN MODEL NO.: PA-MR03LN BRAND: NEC APPLICANT: NEC Access Technica, Ltd. TESTED: Dec. 29, 2013 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Subpart C (Section 15.247) FCC Part 22, Subpart H FCC Part 24, Subpart E ANSI C63.10-2009 The above equipment (model: PA-MR03LN) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above…

Text truncated - open the document above for the full version.

Report No.: RF131024C22-2 1 of 62 Report Format Version 5.2.0 FCC TEST REPORT REPORT NO.: RF131024C22-2 MODEL NO.: PA-MR03LN FCC ID: 2AA5WPAMR03LN RECEIVED: Oct. 24, 2013 TESTED: Dec. 14 ~ Dec. 18, 2013 ISSUED: Jan. 13, 2014 APPLICANT: NEC Access Technica, Ltd. ADDRESS: 800, Shimomata, Kakegawa-shi, Shizuoka 436-8501, Japan ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF131024C22-2 2 of 62 Report Format Version 5.2.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................................ 4 1. CERTIFICATION ............................................................................................................................ 5 2. SUMMARY OF TEST RESULTS ................................................................................................... 6 2.1 MEASUREMENT UNCERTAINTY ................................................................................................ 6 3. GENERAL INFORMATION ............................................................................................................ 7 3.1 GENERAL DESCRIPTION OF EUT .............................................................................................. 7 3.2 DESCRIPTION OF TEST MODES ................................................................................................ 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................................................ 9 3.3 DUTY CYCLE OF TEST SIGNAL ................................................................................................ 11 3.4 DESCRIPTION OF SUPPORT UNITS ........................................................................................ 11 3.4.1 CONFIGURATION OF SYSTEM UNDER TEST ......................................................................... 12 3.5 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................. 13 4. TEST TYPES AND RESULTS ..................................................................................................... 14 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ..................................................... 14 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ................................... 14 4.1.2 TEST INSTRUMENTS ................................................................................................................. 15 4.1.3 TEST PROCEDURES ................................................................................................................. 16 4.1.4 DEVIATION FROM TEST STANDARD ....................................................................................... 16 4.1.5 TEST SETUP ............................................................................................................................... 17 4.1.6 EUT OPERATING CONDITIONS ................................................................................................ 18 4.1.7 TEST RESULTS .......................................................................................................................... 19 4.2 CONDUCTED EMISSION MEASUREMENT .............................................................................. 33 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ........................................................... 33 4.2.2 TEST INSTRUMENTS ................................................................…

Text truncated - open the document above for the full version.