2AAB6-HK0002Remote Controller for Toy

ESKY005437 Transimtter User Manual 1. Transimtter Throttle & Rudder Stick (Mode2) Throttle Trim Lever (Mode 2) Rudder Trim Lever (Mode 2) Elevator & Aileron Stick (Mode2) Elevator Trim Lever (Mode 2) Aileron Trim Lever (Mode 2) Power Switch Antenna Charging Slot for Esky150 LiPo Battery LED Indicator 1) Switch on the helicopter power supply (switch toward to the helicopter tail), the status indicator on helicopter flashes rapidly. 2) Press and hold the right button of the rudder trim lever, and switch on the transimtter simultaneously. 3) When the status indicator is off on the helicopter, release the right button of the rudder trim lever. Then the status indicator is solid light on the helicopter again which indicates the binding successfully. 2.Binding 1) Place four AA batteries inside the transmitter correctly. 2) For safety, switch off the helicopter and transmitter. 3) Plug the charging cable into the charging port under the helicopter battery and plug the other end into the charging slot behind the transmitter. Then, there is a solid green light on the transmitter's LED indicator. 4) When the LiPo battery inside the helicopter is fully charged, the green light will go out. Diagram for the charging process 3.How to charge Esky150 4.Transimtter Control Mode 2 Mode 1 Mode 2 Mode 1 When pushing the ELEVATOR stick up or down, the helicopter moves forward or backward accordingly. When moving the RUDDER stick left or right, the head of the helicopter moves left or right accordingly. When pushing the THROTTLE stick up or down, the helicopter lifts up or descends accordingly. When moving the AILERON stick left or right, the helicopter slides left or right accordingly. ESKY005437 Transimtter User Manual Warning: Changes or modifications to this unit not expressly approved by theparty responsible for compliance could void the user s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. To comply with FCC s RF radiation exposure limits for general population/uncontrolled exposure, this device must be operated only in hands with a separation distance of at least 20 cm from its antenna to the body. In add- ition it must not be collocated or operating in conjunction with any other antenna or transmitter. FCC ID: 2AAB6-HK0002 Item Number:ESKY005437 Zonda Hobby Technologies Electronic Ltd CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling. Hereby, ZONDA HOBBY TECHNOLOGIES ELECTRONIC LIMITED, declares that this is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC ESKY005437

ZONDA HOBBY TECHNOLOGIES ELECTRONIC LIMITED Date: 2013-8-16 Federal Communications Commission Authorization and Evaluation Division FCC ID: 2AAB6-HK0002 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this application as outlined below: 1. Block diagram 2. Schematics 3. Operation Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might to harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentation will not be made before the date of the grant for this application. Sincerely, Name：Chen Guihua Company name: ZONDA HOBBY TECHNOLOGIES ELECTRONIC LIMITED Tel.：00852-31608886 Fax：00852-31608884

ZONDA HOBBY TECHNOLOGIES ELECTRONIC LIMITED AGENCY AUTHORIZATION LETTER FCC ID: 2AAB6-HK0002 Date: 2013-8-16 To whom it may concern: We, the undersigned, hereby authorize Bureau Veritas Shenzhen Co. Ltd Dongguan Branch., to act on our behalf, as our agent, in the following matters related to the FCC approval of our products: report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. Any act carried out by BVDG within the scope of this authorization shall have the same effects as our own. This authorization shall expire 6 months form original date. If you have any Questions regarding the authorization, please don’t hesitate to contact us. Thank you. Sincerely, Name ：Chen Guihua Company name: ZONDA HOBBY TECHNOLOGIES ELECTRONIC LIMITED Tel. ：00852-31608886 Fax：00852-31608884

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 2 Report Version 1 Test Report No.: RF130801N001 PHOTOGRAPHS OF THE EUT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 2 Report Version 1 Test Report No.: RF130801N001

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 2 Report Version 1 Test Report No.: RF130801N001 PHOTOGRAPHS OF THE EUT ANT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 2 Report Version 1 Test Report No.: RF130801N001

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 22 Report Version 1 Test Report No.: RF130801N001 TEST REPORT Applicant ZONDA HOBBY TECHNOLOGIES ELECTRONIC LIMITED Address SUITE NO.2011 20 FLOOR EXCHANGE TOWER 33WANG CHIU ROAD KOWLOON BAY KL IN HONGKONG Manufacturer or Supplier ZONDA HOBBY TECHNOLOGIES ELECTRONIC LIMITED Address SUITE NO.2011 20 FLOOR EXCHANGE TOWER 33WANG CHIU ROAD KOWLOON BAY KL IN HONGKONG Product 2.4G wireless remote-controlled plane Brand Name ESKY Model ESKY005437 Additional Model & Model Difference N/A Date of tests Aug. 01, 2013 ~ Aug. 08, 2013 The submitted sample of the above equipment has been tested according to the requirements of the following standards: FCC Part 15, Subpart C (Section 15.249) CONCLUSION: The submitted sample was found to COMPLY with the test requirement Tested by Glyn He Project Engineer / EMC Department Approved by Sam Tung Manager / EMC Department This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 22 Report Version 1 Test Report No.: RF130801N001 TABLE OF CONTENTS RELEASE CONTROL RECORD ............................................................................................................ 3 1 SUMMARY OF TEST RESULTS.................................................................................................... 4 2 MEASUREMENT UNCERTAINTY................................................................................................. 4 3 GENERAL INFORMATION ............................................................................................................ 5 3.1 GENERAL DESCRIPTION OF EUT ........................................................................................... 5 3.2 DESCRIPTION OF TEST MODES ............................................................................................. 6 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................................ 7 3.4 DESCRIPTION OF SUPPORT UNITS ....................................................................................... 7 4 TEST TYPES AND RESULTS........................................................................................................ 8 4.1 RADIATED EMISSION MEASUREMENT .................................................................................. 8 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT ......................................................... 8 4.1.2 TEST INSTRUMENTS......................................................................................................... 9 4.1.3 TEST PROCEDURES ....................................................................................................... 10 4.1.4 DEVIATION FROM TEST STANDARD .............................................................................. 10 4.1.5 TEST SETUP ......................................................................................................................11 4.1.6 EUT OPERATING CONDITIONS .......................................................................................11 4.1.7 TEST RESULTS................................................................................................................. 12 4.2 20dB BANDWIDTH MEASUREMENT...................................................................................... 17 4.3.1 LIMITS OF 20dB BANDWIDTH MEASUREMENT.............................................................. 17 4.3.2 TEST INSTRUMENTS......................................................................................................... 17 4.3.3 TEST PROCEDURE............................................................................................................ 18 4.3.4 DEVIATION FROM TEST STANDARD ............................................................................... 18 4.3.5 TEST SETUP ....................................................................................................................... 18 4.3.6 EUT OPERATING CONDITIONS ........................................................................................ 19 4.3.7 TEST RESULTS .................................................................................................................. 19 5 PHOTOGRAPHS OF THE TEST CONFIGURATION .................................................................. 21 6 APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO TH…

Text truncated - open the document above for the full version.

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 1 Report Version 1 Test Report No.: 130801N001 PHOTOGRAPHS OF THE EUT