2AAB6-HK00032.4GHz Transmitter

1 GWY005451 6TL Transmitter 1.Transmitter components introduction 2.Transmitter standard and parameters 1)The frequency bandwidth: ISM 2.4GHz (2.400~2.480GHz) 2)number of controller is 6CH 3)The operation current is not greater than 150 mA (include LCD screen);The charging current is not greater than 500mA. 4)The battery is Li-Polymer battery (3.7V), the volume is 780 mAh 1) 2) 3) 4) 5) 6) 7) The transmitter is using 2.4G ISM frequency channel, allow auto detection while using the transmitter. The transmitter receive or distribute the frequency by ID identify technology, protect external jamming, provide stable and reliable during the operation. The LCD setting module is dividable, user-friendly and setting the trim easily. Interchanging interface easily (Change Mode + Menu setting) Trainer connector is using wireless technology The power button is using soft material to become the button, it is durable and change the connection defect while pushing the roller power button The transmitter is based on the ergonomic technology to design the transmitter 3.Product Features Antenna Power button LCD setting module Mode 3 / Mode 4 aileron trim Mode 1 /Mode 3 elevator trim Mode 2 / Mode 4 throttle trim Mode3 elevator and aileron stick Mode4 throttle and aileron stick Mix / Hold Aileron D/R Aux 1 Trainer/Bind Gear 3D switch (Mode 2/ Mode 4) Elevator D/R Flap Gyro Tail Blade pitch (Mode 1/ Mode 3) 3D switch (Mode 1/ Mode 3); Tail Blade pitch (Mode2 /Mode 4) Mode1 elevator and rudder stick Mode2 throttle and rudder stick Mode 1 / Mode 2 rudder trim Mode3 throttle and rudder stick Mode4 elevator and rudder stick Mode1 throttle and aileron stick Mode2 elevator and aileron stick Mode 1 /Mode 3 throttle trim Mode 2 / Mode 4 elevator trim Mode 3 / Mode 4 rudder trim Mode 1 / Mode 2 aileron trim 2 1 2 3 4 Right Throttle to Left Throttle (Mode 1/Mode 3 to Mode 2/ Mode 4) Use a cross-drive screw driver to loosen Screw D. Keep loosening until the stick can move up and down without friction. 1)Tighten Screw C. Keep tightening until the stick can move up and down with rebounds. Loosen Screw B. Keep loosening until the stick can move up and down without rebounds Tighten Screw A. Keep tightening until the stick can move up and down with friction Back view of Transmitter MODE 1 Rudder Stick Elevator Stick Aileron Stick Throttle Stick MODE 2 Rudder Stick Elevator Stick Aileron Stick Throttle Stick MODE 3 Rudder Stick Elevator Stick Aileron Stick Throttle Stick MODE 4 Rudder Stick Elevator Stick Aileron Stick Throttle Stick 2 Set Control Mode, change of control mode There are 4 Control Modes: Mode 1, Mode 2, Mode 3 and Mode 4, as shown in the above 3 Changing control mode 4.Interchanging position of throttle and elevator control 1 1 2 3 4 Structural adjustment: Before the adjustment, please take out the four rubber pistons (A, B, C and D) on the back of the transmitter, as shown in the figure Left Throttle to Right Trottle (Mode 2/Mode 4 to Mode 1/ Mode 3) Use a cross-drive screw driver to loosen Screw A. Keep loosening until the stick can move up and down without friction Tighten Screw B. Keep tightening until the stick can move up and down with rebounds Loosen Screw C. Keep loosening until the stick can move up and down without rebounds Tighten Screw D. Keep tightening until the stick can move up and down with friction 1 Push and hold both the R/A Trim (Rubber/Aileron Trim) leftward at the same time then press the Bind button. The transmitter will emit a series of beep sound. That indicates the transmitter has entered the control mode setting. 3 5.Normal instruction 1) 2) Turn on transmitter procedure: Press and hold the power button 3~5 second, the buzzer will have a beep noise, the LCD icon will light on and solid. This signal means the transmitter is turn on successfully. Binding procedure: Insert the binding plug in the Channel 9 (Power supply interface) receiver / 3 axis gyro and connect the electricity, the LED will fast flashing. Pressing and holding the transmitter binding button and power on the transmitter. When the transmitter was power on, you should release the power button first and wait for 10 seconds after, release the binding button lastly. If the above procedure is success, the LED will solid after 5 seconds and the binding process is completed, remove the binding plug. Otherwise, please follow the above procedure to bind it again. (Note: To operate the binding procedures, please make sure the brushless motor and the ESC is not connected.) LED fast flashing LED fast flashing 3) 4) 5) Turn off transmitter procedure: Press and hold the power button 3~5 second, the buzzer will have a beep noise, the LCD icon will light off and solid. This signal means the transmitter is turn off successfully. Trainer wireless binding: Open the transmitter (Master transmitter), plug in the wireless connection device through the 30 Pin connector, after that press and hold the binding button, it will auto detect the wireless connection device and connect with the transmitter in 20 seconds. If success, the LED wireless connection device will solid. Charging procedure: Plug in the charging connection wire to the transmitter via the 30 Pin charging connector, and then plug the USB connector in the 5V charger. Remove the binding plug Pressing and holding the transmitter binding button and power on the transmitter. When the transmitter was power on, you should release the power button first and wait for 10 seconds after, release the binding button lastly Jack in the binding plug Press the Binding button and the power button at the same time LED steady light LED steady light, Remove the binding plug 2 3 Select your desired control mode by pushing the T/E Trim (Throttle/Elevator Trim) as instructions and picture shown below: Push the right T/E Trim upward for MODE 1, one beep sound will be emitted. Push the right T/E Trim downward for MODE 2, two beeps will be emitted. Push the left T/E Trim upward for MODE 3, three beeps w…

Text truncated - open the document above for the full version.

ZONDA HOBBY TECHNOLOGIES ELECTRONIC LIMITED Date: 2013-10-28 Federal Communications Commission Authorization and Evaluation Division FCC ID: 2AAB6-HK0003 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant hereby requests confidential treatment of information accompanying this application as outlined below: 1. Block diagram 2. Schematics 3. Operation Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might to harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Rule 0.457, disclosure of this application and all accompanying documentation will not be made before the date of the grant for this application. Sincerely, Name：gui hua Chen Company name: ZONDA HOBBY TECHNOLOGIES ELECTRONIC LIMITED Tel.：00852-31608886 Fax：00852-31608884

ZONDA HOBBY TECHNOLOGIES ELECTRONIC LIMITED AGENCY AUTHORIZATION LETTER FCC ID: 2AAB6-HK0003 Date: 2013-10-28 To whom it may concern: We, the undersigned, hereby authorize Bureau Veritas Shenzhen Co. Ltd Dongguan Branch., to act on our behalf, as our agent, in the following matters related to the FCC approval of our products: report submittal, related correspondence, the signing of all documents relating to these matters, and any other lawful activity necessary to obtain such certification. Any act carried out by BVDG within the scope of this authorization shall have the same effects as our own. This authorization shall expire 6 months form original date. If you have any Questions regarding the authorization, please don’t hesitate to contact us. Thank you. Sincerely, Name：gui hua Chen Company name: ZONDA HOBBY TECHNOLOGIES ELECTRONIC LIMITED Tel.：00852-31608886 Fax ：00852-31608884

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 7 Report Version 1 Test Report No.: RF130910N013R1 PHOTOGRAPHS OF THE EUT Model: GWY005451 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 7 Report Version 1 Test Report No.: RF130910N013R1 Controler : Model: GWY004540 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 7 Report Version 1 Test Report No.: RF130910N013R1 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 4 of 7 Report Version 1 Test Report No.: RF130910N013R1 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 5 of 7 Report Version 1 Test Report No.: RF130910N013R1 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 6 of 7 Report Version 1 Test Report No.: RF130910N013R1 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 7 of 7 Report Version 1 Test Report No.: RF130910N013R1

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 8 Report Version 1 Test Report No.:RF130910N013R1 PHOTOGRAPHS OF THE EUT Model: GWY005451 (Controler) Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 8 Report Version 1 Test Report No.:RF130910N013R1 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 8 Report Version 1 Test Report No.:RF130910N013R1 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 4 of 8 Report Version 1 Test Report No.:RF130910N013R1 Model: GWY004540 (RF Modular) ANT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 5 of 8 Report Version 1 Test Report No.:RF130910N013R1 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 6 of 8 Report Version 1 Test Report No.:RF130910N013R1 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 7 of 8 Report Version 1 Test Report No.:RF130910N013R1 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 8 of 8 Report Version 1 Test Report No.:RF130910N013R1

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch Tel: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] No SAR justification for FCC ID : 2AAB6-HK003 Following FCC KDB 447498 D01 “General SAR test exclusion guidance” The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,16 where
 f(GHz) is the RF channel transmit frequency in GHz
 Power and distance are rounded to the nearest mW and mm before calculation
 The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test separation distances ≤ 50 mm. c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to be acceptable. Smallest distance from the antenna and radiating structures or outer surface of the device The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. (See below figure) Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch Tel: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch Tel: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] SAR Test Exclusion Thresholds Mode Frequency (GHz) Maximum source-based time averaged conducted output power including tune-up tolerance (mW) Minimum separation distance (mm) SAR test exclusion thresholds (mW) for 1-g SAR SAR test exclusion thresholds (mW) for 10-g extremity SAR Verdict GFSK 2.476 79.068 60 mm 190.489 326.267 Exempt from SAR Conclusion Therefore our device complies with FCC’s RF radiation exposure limits for general population without SAR evaluation.

BureauVeritasShenzhenCo.,Ltd. DongguanBranch No.
34,
Chenwulu
Section,
Guantai
Rd.,
Houjie
Town,
Dongguan
City,
Guangdong
523942,
China
Tel:
+86
769
8593
5656
Fax:
+86
769
8593
1080
Email:
[email protected]










Page
1
of
44










































Report
Version
1

TestReportNo.:RF130910N013R1 TESTREPORT Applicant
ZONDA
HOBBY
TECHNOLOGIES
ELECTRONIC
LIMITED
Address:
Workshop
No.1,
1/F,
Kam
Hon
industrial
Building,
No.8
Wang
Kwun
Road,
Kowloon
Bay,
Kowloon,
Hong
Kong
 Manufacturer
or
Supplier
ZONDA
HOBBY
TECHNOLOGIES
ELECTRONIC
LIMITED
Address
Workshop
No.1,
1/F,
Kam
Hon
industrial
Building,
No.8
Wang
Kwun
Road,
Kowloon
Bay,
Kowloon,
Hong
Kong.
Product
2.4GHz
Transmitter


Brand
Name
GWY
Model
GWY005451
Additional
Model
&

Model
Difference
N/A
Date
of
tests
Sep.
10,
2013
~
Oct.
09,
2013
the
tests
have
been
carried
out
according
to
the
requirements
of
the
following
standards:
FCCPart15,SubpartC,Section15.247(2012+10)
CONCLUSION:ThesubmittedsamplewasfoundtoCOMPLYwiththetestrequirement Tested
by
Venless
long
Project
Engineer
/
EMC
Department
Approved
by
Glyn
He
Supervisor
/
EMC
Department









This
report
is
for
your
exclusive
use.
Any
copying
or
replication
of
this
report
to
or
for
any
other
person
or
entity,
or
use
of
our
name
or
trademark,
is
permitted
only
with
our
prior
written
permission.
This
report
sets
forth
our
findings
solely
with
respect
to
the
test
samples
identified
herein.
The
results
set
forth
in
this
report
are
not
indicative
or
representative
of
the
quality
or
characteristics
of
the
lot
from
which
a
test
sample
was
taken
or
any
similar
or
identical
product
unless
specifically
and
expressly
noted.
Our
report
includes
all
of
the
tests
requested
by
you
and
the
results
thereof
based
upon
the
information
that
you
provided
to
us.
You
have
60
days
from
date
of
issuance
of
this
report
to
notify
us
of
any
material
error
or
omission
caused
by
our
negligence,
provided,
however,
that
such
notice
shall
be
in
writing
and
shall
specifically
address
the
issue
you
wish
to
raise.
A
failure
to
raise
such
issue
within
the
prescribed
time
shall
constitute
your
unqualified
acceptance
of
the
completeness
of
this
report,
the
tests
conducted
and
the
correctness
of
the
report
contents.
Unless
specific
mention,
the
uncertainty
of
measurement
has
been
explicitly
taken
into
account
to
declare
the
compliance
or
nonDcompliance
to
the
specification

BureauVeritasShenzhenCo.,Ltd. DongguanBranch No.
34,
Chenwulu
Section,
Guantai
Rd.,
Houjie
Town,
Dongguan
City,
Guangdong
523942,
China
Tel:
+86
769
8593
5656
Fax:
+86
769
8593
1080
Email:
[email protected]










Page
2
of
44










































Report
Version
1

TestReportNo.:RF130910N013R1 TABLEOFCONTENTS RELEASECONTROLRECORD.............................................................................................................5 1SUMMARYOFTESTRESULTS......................................................................................................6 2
MEASUREMENTUNCERTAINTY...................................................................................................6
3
GENERALINFORMATION..............................................................................................................7
3.1
GENERAL
DESCRIPTION
OF
EUT ........................................................................................... 7
3.2
DESCRIPTION
OF
TEST
MODES ............................................................................................. 8
3.2.1.
CONFIGURATION
OF
SYSTEM
UNDER
TEST ............................................................... 8
3.2.2.
TEST
MODE
APPLICABILITY
AND
TESTED
CHANNEL
DETAIL .................................... 9
3.3
GENERAL
DESCRIPTION
OF
APPLIED
STANDARDS .......................................................... 11
3.4
DESCRIPTION
OF
SUPPORT
UNITS ..................................................................................... 11
4
TESTTYPESANDRESULTS .......................................................................................................12
4.1.
CONDUCTED
EMISSION
MEASUREMENT ........................................................................... 12
4.1.1
LIMITS
OF
CONDUCTED
EMISSION
MEASUREMENT................................................ 12
4.1.2
TEST
INSTRUMENTS ..................................................................................................... 12
4.1.3
TEST
PROCEDURES...................................................................................................... 13
4.1.4
DEVIATION
FROM
TEST
STANDARD ............................................................................ 13
4.1.5
TEST
SETUP ................................................................................................................... 14
4.1.6
EUT
OPERATING
CONDITIONS .................................................................................... 14
4.1.7
TEST
RESULTS ............................................................................................................... 15
4.2.
RADIATED
EMISSION
AND
BANDEDGE
MEASUREMENT .................................................. 17
4.2.1


LIMITS
OF
RADIATED
EMISSION
AND
BANDEDGE
MEASUREMENT ...................... 17
4.2.2


TEST
INSTRUMENTS .................................................................................................... 18
4.2.3


TEST
PROCEDURES ..................................................................................................... 19
4.2.4


DEVIATION
FROM
TEST
STANDARD ........................................................................... 19
4.2.5


TEST
SETUP .......................…

Text truncated - open the document above for the full version.

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 2 Report Version 1 Test Report No.: RF130910N013R1 SET-UP FOR CONDUCTED EMISSION TEST Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8593 5656 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 2 Report Version 1 Test Report No.: RF130910N013R1 SET-UP FOR RADIATED EMISSION TEST Frequency Range< 30MHz~1GHz > Frequency Range< Above 1GHz >