2AACZ-ADVANTAGE1XMobile Phone

Getting Started manual Safety issues and environmental protection „ Please do not use the mobile phone when driving to avoid accidents, or use earphone. „ Medical Equipment: Please power off the mobile phone in the Medical care place or the place with “No wireless device” notice. „ Keep the phone powered off in flight. Make sure cancelling the alarm and auto power setting to avoid power on automatically； „ Put the wasted batteries into the recycling trash and do not throw it away. „ Please do not use mobile phone either in too high or too low temperature environment, sunlight or humidity place。 „ In order to be waterproof and dustproof, please ensure battery cover, battery lock catch, screw plug, earphone plug and USB rubber plug are in perfectly close status. „ Do not use the mobile phone in the gas station, fuel or chemicals nearby. „ Power off the mobile phone in the blasting site. „ Use the original accessories and battery to get the best performance. Do not connect with the incompatible parts. „ Do not disassemble the mobile phone by yourself and please go to the assigned service center for maintenance. „ Use the mobile phone in the network coverage. „ Call the local emergency number in case of emergency for help. „ Data Backup：Please backup the important info to avoid loss. „ Your device is a radio transmitter and receiver. It is designed not to exceed the international guidelines limits for exposure to radio waves recommended by (ICNIRP). These guidelines were developed by the independent scientific organization ICNIRP. It include safety margins to protect all people, regardless of age or health。 „ The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 2.0 watts/kilogram (W/kg) averaged over 10 grams tissue. Use of device accessories may result in different SAR values. SAR values may vary depending on national reporting and testing requirements and the network band。 with the EN62311-2008 SAR test requirements., The maximum SAR of this device on ear, body is: 2 w/kg, according to the ICNIRP standard. The device actual SAR is: 0.443～0.901w/kg Introduction Status Icons Type Defination GSM network UMTS network Unknown network Flight network Battery status Roam GSM network Roam UMTS network GPRS EDGE UMTS Calling Missed call Unread SMS Unread MMS New email Bluetooth Alarm clock Memory full Memory card as U disk Music Radio Vibrating Silent Ringtone Ringtone+ vibrating Specification Frequency GSM 850/900/1800/1900MHz； WCDMA 850/1900/2100MHz Size 115 x 53 x 23 mm Dual mode single stay Dual mode single stay, single connect Battery capacity 1500mAh Li-ion battery Talking time： 5 h, use 2G GSM; 4 h, use 3G GSM; Standby time 288h Memory capacity 170MB，Micro-SD card up to 8G Phonebook、SMS capacity、call record Phonebook：1000 pcs in memory card SMS： 2000pcs in the phone; SIM card could also save SMS. Missed call：30 Received call：30 Dialed call：30 MMS、Email Support Camera、Video recorder、Video player Camera supports 2.0M; Video record format：3GP,MPEG4,H263,H264（VIEDO is software of the third party）; Video play： Support 3GP/MP4 and full screen Talking firewall/ Hands free Support Bluetooth、WAP Bluetooth support V2.1,stereo headphone; WAP support 2.0 Call divert/call waiting Network support JAVA Support MP3、record Audio file format support：MP3,MP4,MIDI,AMR,AAC FM Support，FM support RDS Mobile phone lock、keypad lock、data lock Support Memorandum、unit conversion、stopwatch、count down Support Earphone port micro USB Flash light、Torch Support GPS Support Install USIM/SIM card/Micro SD-crad , take out battery, and charge ※ In order to be waterproof and dustproof, please ensure battery cover, battery lock catch, screw plug, earphone plug and USB rubber plug are in perfectly close status. This will not be specially declared in below content. „ Storage tips： Use USB cable to copy and move documents, copy to MP3 to My Music, copy MP4/ AVI to Video clips, record documents/video documents to Video clips, copy pictures to Photos. Notice：Do not take out USB cable directly, please quit first, in order to avoid data loss. Menu Navigation More：Mail box Set mail box account 1. Enter “Email”，activate “Select”，choose ’Settings’ 2. There are 3 default templates, user could add for himself. Take the second one for example, enter “Setting”，user could add account information. Choose “User information” to edit account information. Name：type your full name of email E-Mail address：type your full email address User ID：：type your full name of email Password：type keys of your email account SMTP user ID：type your full name of email SMTP Password：type keys of your email account ※ Notice：full name of email should be the same one 3. Edit and save User information, return to email box accounts, choose “connection”. Check “outgoing server” and “Incoming server” if they are right settings. You could find all kinds of setting parameter from related official website. 4. After finish setting, enter “Accounts”, choose this email account, you could use email to send/receive emails. 5. Write email Enter New mail， after edit please press the left key, choose ’Send’, the email will be sent out. 6. Receive email Enter Inbox，Press the left key to choose‘Retrieve E-Mail’，choose‘Only headers’or‘Header and body’，then you could receive email. ※ Notice: About Videos player, as resolution of the mobile phone is 240*320, suggest video code rate is less than 512kbps; 3GP/MP4 Video files could play when speed is about 10 frames. ※ Notice: To launch SOS, you have you set emergency number first, and SOS on, Settings--Emergency call--Number List. When standby, you could start emergency call by long pressing SOS side key. FCC Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, …

Text truncated - open the document above for the full version.

Label and label location Size：34mm X 12 mm Label location

Report No: CCIS13050012901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS130500129RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 84 of 91 Report No: CCIS13050012901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS130500129RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 85 of 91 Report No: CCIS13050012901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS130500129RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 86 of 91 Report No: CCIS13050012901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS130500129RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 87 of 91 Report No: CCIS13050012901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS130500129RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 88 of 91 Report No: CCIS13050012901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS130500129RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 89 of 91 Report No: CCIS13050012901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS130500129RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 90 of 91 Report No: CCIS13050012901 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS130500129RF No.B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao’an District, Shenzhen, Guangdong, China Telephone: +86 (0) 755 23118282 Fax: +86 (0) 755 23116366 Page 91 of 91 ------End of report------

Shenzhen Zhongjian Nanfang Testing Co., Ltd. Report No: CCIS13050012903 Authorized Signature: Bruce Zhang Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the CCIS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 1 Cover Page FCC REPORT Applicant: i.safe MOBILE GmbH Address of Applicant: i_Park Tauberfranken 14 97922 Lauda-Koenigshofen, Germany Equipment Under Test (EUT) Product Name: Mobile phone Model No.: ADVANTAGE 1.0,ADVANTAGE 1.1 Trade mark: i.safe MOBILE FCC ID: 2AACZ-ADVANTAGE1X Applicable standards: FCC CFR Title 47 Part 15 Subpart B Date of sample receipt: 09 May 2013 Date of Test: 10 May to 04 June 2013 Date of report issued: 06 June 2013 Test Result : Pass * * In the configuration tested, the EUT complied with the standards specified above. Report No: CCIS13050012903 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS130500129RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2311 8282 Fax: +86 (0) 755 2311 6366 Page 2 of 18 2 Version Version No. Date Description 00 06 June 2013 Original Prepared by: Date: 06 June 2013 Report Clerk Reviewed by: Date: 06 June 2013 Project Engineer Report No: CCIS13050012903 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS130500129RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2311 8282 Fax: +86 (0) 755 2311 6366 Page 3 of 18 3 Contents Page 1 COVER PAGE ......................................................................................................................................................... 1 2 VERSION .................................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................................. 3 4 TEST SUMMARY .................................................................................................................................................... 4 5 GENERAL INFORMATION ................................................................................................................................... 5 5.1 CLIENT INFORMATION ............................................................................................................................................ 5 5.2 GENERAL DESCRIPTION OF E.U.T. .......................................................................................................................... 5 5.3 OPERATING MODES ................................................................................................................................................ 5 5.4 DESCRIPTION OF SUPPORT UNITS ........................................................................................................................... 6 5.5 LABORATORY FACILITY ......................................................................................................................................... 6 5.6 LABORATORY LOCATION ........................................................................................................................................ 6 5.7 TEST INSTRUMENTS LIST......................................................................................................................................... 7 6 TEST RESULTS AND MEASUREMENT DATA ................................................................................................ 8 6.1 CONDUCTED EMISSION ........................................................................................................................................... 8 6.2 RADIATED EMISSION ............................................................................................................................................ 11 7 TEST SETUP PHOTO .......................................................................................................................................... 17 8 EUT CONSTRUCTIONAL DETAILS ................................................................................................................. 18 Report No: CCIS13050012903 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS130500129RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2311 8282 Fax: +86 (0) 755 2311 6366 Page 4 of 18 4 Test Summary Test Item Section in CFR 47 Result Conducted Emission Part 15.107 Pass Radiated Emission Part 15.109 Pass Pass: The EUT complies with the essential requirements in the standard. Report No: CCIS13050012903 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS130500129RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2311 8282 Fax: +86 (0) 755 2311 6366 Page 5 of 18 5 General Information 5.1 Client Information Applicant: i.safe MOBILE Gm…

Text truncated - open the document above for the full version.

Report No: CCIS13050012903 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS130500129RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2311 8282 Fax: +86 (0) 755 2311 6366 Page 17 of 18 7 Test Setup Photo Radiated Emission Report No: CCIS13050012903 Shenzhen Zhongjian Nanfang Testing Co., Ltd. Project No.: CCIS130500129RF 1st Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2311 8282 Fax: +86 (0) 755 2311 6366 Page 18 of 18 Conducted Emission 8 EUT Constructional Details Reference to the test report No. CCIS13050012901 ------End of report------