2AACZ-INNOVATION2XMobile phone

INNOVATION 2. Quick Start Manual and Safety Instructions Schnellstartanleitung und Sicherheitshinweise X Template: TEMPMD01REV00 Document No. 1008DI02REV01 Version: 2013-11-04 Reservation: Technical Data is subject to change without notice. Changes, errors and misprints may not be used as a basis for any claim for damages. All rights reserved. i.safe MOBILE GmbH cannot be held responsible for any data or other loss and direct or indirect damages caused by any improper use of this phone. Vorbehalt: Technische nderungen behalten wir uns vor. nderungen, ää Irrtmer und Druckfehler begrnden keinen Anspruch auf Schadensersatzüü. Alle Rechte vorbehalten. Fr üDatenverluste oder andere Schden ägleich welcher Art, die durch den unsachgemen Gebraäßuch des Telefons entstanden sind, bernimmtü die i.safe MOBILE GmbH keine Haftung. (c) 2013 i.safe MOBILE GmbH i.safe MOBILE GmbH i_PARK TAUBERFRANKEN 14 97922 Lauda-Koenigshofen Germany Tel. +49 9343/60148-0 [email protected] www.isafe-mobile.com Note / Hinweis 3 This document contains a quick start guide and the safety instructions necessary for the safe use of the smartphone INNOVATION 2.0 in ex- plosive atmospheres. The first part details the English instructions, the second part the German translation. More detailed instructions on the use of the phone can be found at www.isafe-MOBILE.com or directly at i.safe MOBILE GmbH. Dieses Dokument enthlt die notwendigen Sicherheitshinweise fr die äü sichere Verwendung des Smartphones INNOVATION 2.0 in explosions- fhigen Bereichen. Der erste Teil enthlt die englischen Anweisungen, ää der zweite Teil die deutsche bersetzuüng. Detailliertere Informationen erhalten sie unter www.isafe-MOBILE.com oder direkt bei der i.safe MOBILE GmbH. Contents 4 1 Introduction 5 2 Ex-Specifications 6 3 Faults and Damages 7 4 Ex-relevant Safety Regulations 8 5 Further Safety Advises 9 6 i.safe PROTECTOR 12 7 Keys 13 8 First Steps 14 8.1 Battery 14 8.2 Installation of the SIM Cards 16 8.3 Installation of the Micro-SD Card 17 8.4 First Use 17 8.5 Locking and Unlocking the phone 18 8.6 Using the Touchscreen 19 8.7 Connecting the phone with a computer 19 9 Display Layout 20 9.1 Status Bar 20 9.2 Quick Access Panel 22 9.3 Home Screen 23 10 Specifications 25 11 Troubleshooting 26 12 Maintenance 27 Safety Instructions 5 1 Introduction This document contains information and safety regulations which are to be observed without fail for safe operation of the smartphone INNOVATION 2.0 under the described conditionsNon. - observance of this information and instructions can have serious consequences and / or may violate regulations. Please read the manual and these safety instructions before using the phone . In case of contradicting information the text of these safety . instructions shall apply. In case of any doubt, the German version shall apply. The current EC declaration of conformity, EC and IECEx certificates of conformity, safety instructions and manual can be found at www.isafe- mobile.com, or requested from i.safe MOBILE GmbH. Note This document contains only the instructions necessary for setting up and safe use of your phone. A complete Quick Start Manual can be found in the root folder of the Micro- SD card of the phone or at www.isafe-mobile.com. Please consult 8.7 to learn how to access the Micro-SD card from any computer. Safety Instructions 6 2 Ex-Specifications The INNOVATION 2.0 is a smartphone suitable for use in potentially explosive atmospheres (zones 1, 21, 2 and 22) in accordance with direc- tives 94/9/EC (ATEX 95) and 99/92/EC (ATEX 137), as well as the IECEx scheme. Ex-markings ATEX II 2G Ex ib IIC T4 Gb II 2D Ex ib IIIC T135 C Db IP6X EPS 13 ATEX 1 579 X 2004 IECEx: Ex ib IIC T4 Gb Ex ib IIIC T135 C Db IP6X IECEx EPS 13.0025X Temperature range: -20 ... +60 C Manufactured by: i.safe MOBILE GmbH i_PARK TAUBERFRANKEN 14 97922 Lauda-Koenigshofen Germany Safety Instructions 7 3 Faults and Damages If there is any reason to suspect that the safety of the phone has been compromised, it must be withdrawn from use and removed from any ex-hazardous areas immediately. Measures must be taken to prevent any accidental restarting of the phone. The safety of the phone may be compromised, if, for example: malfunctions occur. the housing of the phone or the battery shows damage. the phone has been subjected to excessive loads. the phone has been stored improperly. markings or labels on the phone are illegible. It is recommended that a phone which shows or which is suspected of faults and damages is returned i.safe MOBILE GmbH for inspection. Safety Instructions 8 4 Ex-relevant Safety Regulations Use of this phone assumes that the operator observes the conventional safety regulations and has read and understood manual, safety instruc- tions and certificate. The following safety regulations must also be complied with: Inside ex-hazardous areas the phone must be closed. The battery has to be fixed by the two screws and the cover of the USB interface has to be closed. The battery may only be exchanged or charged outside ex-hazardous areas. The phone may only be charged outside ex-hazardous areas using the i.safe PROTECTOR USB-cable or other equipment ap- proved by i.safe MOBILE GmbH. USB-connections to other equipment are only allowed outside ex- hazardous areas using the i.safe PROTECTOR USB-cable or other equipment approved by i.safe MOBILE GmbH. Use only the appropriate battery type BPI02A. It is not allowed to carry spare batteries into ex-hazardous areas. The phone may be charged only at temperatures in between 0 C ... 45 C. The phone must not be exposed to abrasive acids or bases. The phone must not be taken into zones 0 or 20. Only accessories approved by i.safe MOBILE GmbH may be used. Safety Instructions 9 5Further Safety Advises Do not touch the screen of the phone with sharp objects. Dust parti- cles and nails may scratch the screen. Please maintain the screen clean. Remove dust on the screen with a soft cloth gently, and do…

Text truncated - open the document above for the full version.

i.safe MOBILE GmbH Add: i_PARK TAUBERFRANKEN 14 97922 Lauda-Koenigshofen,Germany Tel: +49 (0)9343 60148-11 Fax: +49 (0)9343 60148-99 FCC Confidential Authorization Date: 2014-11-18 FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Confidentiality Request regarding application for certification of FCC ID: 2AACZ- INNOVATION2X Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: ƒ Detailed Circuit Schematics of EUT--- (Long term) ƒ Block Diagram--- (Long term) ƒ Circuit Description--- (Long term) ƒ Part List--- (Long term) ƒ Tune up procedure--- (Long term) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely Yours, Signature: Martin.Haaf General manager

EXHIBIT B - EUT EXTERNAL PHOTOGRAPHS EUT – All View EUT – Top View EUT – Bottom View EUT – Side View EUT – Side View EUT – Side View EUT – Side View EUT – Adapter View EUT – Adapter Information View EUT – USB Cable View EUT – USB Information View

EXHIBIT A - FCC ID LABELING AND LOCATION FCC ID Label Proposed FCC ID Label Location The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925) Label Here

EXHIBIT C - EUT INTERNAL PHOTOGRAPHS EUT –Battery Uncover View EUT – Battery InformationView EUT –Uncover View 1 EUT –Uncover View 2 EUT – Main Board Top View 1 EUT –Main Board Top View 2 EUT – Main Board Top Shielding off View EUT –Main Board Bottom Shielding off View EUT – GSM/WCDMA Antenna View EUT – BT /Wi-Fi Antenna View EUT – GSM/WCDMA Chip View EUT – BT/Wi-Fi Chip View

Note: This test report is prepared for the customer shown above and for the equipment described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. SAR EVALUATION REPORT For i. safe MOBILE GmbH i_PARK TAUBERFRANKEN 14 97922 Lauda- Koenigshofen, Germany FCC ID: 2AACZ-INNOVATION2X Report Type: Original Report Product Type: Mobile phone Test Engineer: Wilson Chen Report Number: RDG140805004-20 Report Date: 2014-09-24 Reviewed By: Bell Hu SAR Engineer Prepared By: Bay Area Compliance Laboratories Corp. (Shenzhen) 6/F, the 3rd Phase of WanLi Industrial Building, ShiHua Road, FuTian Free Trade Zone Shenzhen, Guangdong, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn Bay Area Compliance Laboratories Corp. (Shenzhen) Report No: RDG140805004-20 SAR Evaluation Report 2 of 96 Attestation of Test Results EUT Information Company Name i. safe MOBILE GmbH EUT Description Mobile phone FCC ID 2AACZ-INNOVATION2X Model Number INNOVATION2.0 Test Date 2014-08-23 Frequency Max. SAR Level(s) Reported Limit(W/Kg) GSM 850 0.114 W/kg 1g Head SAR 0.593 W/kg 1g Body SAR 1. 6 PCS 1900 0.063 W/kg 1g Head SAR 0.182 W/kg 1g Body SAR WCDMA1900 0.081 W/kg 1g Head SAR 0.201 W/kg 1g Body SAR Simultaneous 0.461 W/kg 1g Head SAR 0.767 W/kg 1g Body SAR Applicable Standards ANSI / IEEE C95.1 : 2005 IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fileds,3 kHz to 300 GHz. ANSI / IEEE C95.3 : 2002 IEEE Recommended Practice for Measurements and Computations of Radio Frequency Electromagnetic Fields With Respect to Human Exposure to SuchFields,100 kHz—300 GHz. IEEE1528:2013 IEEE Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques KDB procedures KDB 447498 D01 Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies. KDB 648474 D04 SAR Evaluation Considerations for Wireless Handsets KDB 865664 D01SAR Measurement Requirements for 100 MHz to 6 GHz KDB 941225 D01 SAR Measurement Procedures for 3G Devices-CDMA 2000/EV-Do WCDMA/HSDPA/HSUPA KDB 941225 D06 SAR Evaluation Procedures for Portable Devices with Wireless Router Capabilities. Note: This wireless device has been shown to be capable of compliance for localized specific absorption rate (SAR) for General Population/Uncontrolled Exposure limits specified in ANSI/IEEE Standards and has been tested in accordance with the measurement procedures specified in IEEE 1528-2013 and RF exposure KDB procedures. The results and statements contained in this report pertain only to the device(s) evaluated. Bay Area Compliance Laboratories Corp. (Shenzhen) Report No: RDG140805004-20 SAR Evaluation Report 3 of 96 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ......................................................................................................................... 5 EUT DESCRIPTION .................................................................................................................................................... 6 TECHNICAL SPECIFICATION ......................................................................................................................................... 6 REFERENCE, STANDARDS, AND GUILDELINES ............................................................................................... 7 SAR LIMITS ................................................................................................................................................................. 8 FACILITIES .................................................................................................................................................................. 9 DESCRIPTION OF TEST SYSTEM ........................................................................................................................ 10 EQUIPMENT LIST AND CALIBRATION ............................................................................................................. 17 EQUIPMENTS LIST & CALIBRATION INFORMATION .................................................................................................... 17 SAR MEASUREMENT SYSTEM VERIFICATION .............................................................................................. 18 LIQUID VERIFICATION ............................................................................................................................................... 18 SYSTEM ACCURACY VERIFICATION ........................................................................................................................... 21 SAR SYSTEM VALIDATION DATA ..................................................................................................................... 22 EUT TEST STRATEGY AND METHODOLOGY ................................................................................................. 30 TEST POSITIONS FOR DEVICE OPERATING NEXT TO A PERSON’S EAR........................................................................ 30 CHEEK/TOUCH POSITION ........................................................................................................................................... 31 EAR/TILT POSITION ................................................................................................................................................... 31 TEST POSITIONS FOR BODY-WORN AND OTHER CONFIGURATIONS .............................................................................. 32 SAR EVALUATION PROCEDURE ................................................................................................................................. 33 TEST METHODOLOGY ................................................................................................................................................. 33 CONDUCTED OUTPUT POWER MEASUREMENT ...............................…

Text truncated - open the document above for the full version.

Note: This test report is prepared for the customer shown above and for the device described herein. It may not be duplicated or used in part without prior written consent from Bay Area Compliance Laboratories Corp. (Dongguan). This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. FCC PART 22H, PART 24E MEASUREMENT AND TEST REPORT For i.safe MOBILE GmbH i_PARK TAUBERFRANKEN 14 97922 Lauda-Koenigshofen,Germany Report Type: Original Report Product Type: Mobile phone Test En gineer: Dean Liu Re port Number: RDG140805004-00C Re port Date: 2014-11-17 Reviewed B y: Sula Huang RF Engineer Test Laboratory: Bay Area Compliance Laboratories Corp. (Dongguan) No.69 Pulongcun, Puxinhu Industrial Zone, Tangxia, Dongguan, Guangdong, China Tel: +86-769-86858888 Fax: +86-769-86858891 www.baclcorp.com.cn FCC ID: 2AACZ-INNOVATION2X Bay Area Compliance Laboratories Corp. (Dongguan) Report No.: RDG140805004-00C FCC Part 22H/24E Page 2 of 46 TABLE OF CONTENTS GENERAL INFORMATION ....................................................................................................................................... 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ..................................................................................... 4 OBJECTIVE ................................................................................................................................................................... 4 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................. 4 TEST METHODOLOGY .................................................................................................................................................. 4 TEST FACILITY ............................................................................................................................................................. 5 SYSTEM TEST CONFIGURATION .......................................................................................................................... 6 JUSTIFICATION ............................................................................................................................................................. 6 EQUIPMENT MODIFICATIONS ....................................................................................................................................... 6 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................... 6 CONFIGURATION OF TEST SETUP ................................................................................................................................. 6 BLOCK DIAGRAM OF TEST SETUP ................................................................................................................................ 7 SUMMARY OF TEST RESULTS ............................................................................................................................... 8 FCC §1.1310 & §2.1093- RF EXPOSURE .................................................................................................................... 9 APPLICABLE STANDARD .............................................................................................................................................. 9 TEST RESULT ............................................................................................................................................................... 9 FCC §2.1047 - MODULATION CHARACTERISTIC ............................................................................................ 10 FCC § 2.1046, § 22.913 (A) & § 24.232 (C) - RF OUTPUT POWER ...................................................................... 11 APPLICABLE STANDARD ............................................................................................................................................ 11 TEST PROCEDURE ...................................................................................................................................................... 11 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 12 TEST DATA ................................................................................................................................................................ 12 FCC §2.1049, §22.917, §22.905 & §24.238 - OCCUPIED BANDWIDTH .............................................................. 15 APPLICABLE STANDARD ............................................................................................................................................ 15 TEST PROCEDURE ...................................................................................................................................................... 15 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 15 TEST DATA ................................................................................................................................................................ 15 FCC §2.1051, §22.917(A) & §24.238(A) - SPURIOUS EMISSIONS AT ANTENNA TERMINALS .................. 21 APPLICABLE STANDARD ............................................................................................................................................ 21 TEST PROCEDURE ...................................................................................................................................................... 21 TEST EQUIPMENT LIST AND DETAILS ......................................................................................................................... 21 TEST DATA ....................................................…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Radiated Emission View---Below 1GHz Radiated Emission View---Above 1GHz