2AAEH-105Intelligent Backhaul Radio

2460 N First St., Suite 200, San Jose, CA 95131 U.S.A. Doc # 770-00023.1 (408) 430-5440 www.fastbacknetworks.com Jan. 23, 2015 Intelligent Backhaul Radio Installation & Operation Guide IBR Installation Guide Page 2 of 38 Doc # 770-00023.1 Jan. 23, 2015 Purpose & Applicability of This Guide This Guide provides detailed information related to installing, operating, and trouble-shooting Fastback Network’s Intelligent Backhaul Radio (“IBR”)*. This Guide provides information that is specifically applicable to the following: A. The Matched Pair of Standard IBRs 1. Product Number: IBR-1201-38-NA  Transmit Frequency Band: 5150 – 5250 GHz  Transmit Power: 40 dBm EIRP  Receive Frequency Band: 5725 – 5850 GHz 2. Product Number: IBR-1201-83-NA  Transmit Frequency Range: 5725 – 5850 GHz  Transmit Power: 40 dBm EIRP  Receive Frequency Band: 5150 – 5250 GHz B. The Matched Pair of Extended Range IBRs 1. Product Number: IBR-1211-38-NA  Transmit Frequency Band: 5150 – 5250 GHz  Transmit Power: 44 dBm EIRP  Receive Frequency Band: 5725 – 5850 GHz 2. Product Number: IBR-1211-83-NA  Transmit Frequency Band: 5725 – 5850 GHz  Transmit Power: 44 dBm ERIP  Receive Frequency Band: 5150 – 5250 GHz C. The features contained in IBR software release 1.6. NOTES: Patents: www.fastbacknetworks.com/patents ** “Model Number” is used by regulatory bodies for regulatory compliance purposes. *** “Product Number” is used to identify a unique product and for ordering. IBR Installation Guide Page 3 of 38 Doc # 770-00023.1 Jan. 23, 2015 Special Considerations and Safety Warnings Prior to installing and operating this equipment, read all instructions and warning notices marked on the equipment or in accompanying documentation. Do not attempt to apply power to equipment that shows signs of damage, tampering, or mishandling. Do not open the equipment or attempt to repair or modify it. Doing so will void the warranty and might create a safety hazard and/or cause the equipment to be out of compliance with regulations. This equipment should be installed, operated, and serviced only by qualified personnel and in a location that is accessible only by authorized service personnel. Installation and operation of this equipment should be in compliance with applicable national and local codes. Ensure that this equipment is grounded at all times in accordance with local codes. IBR Installation Guide Page 4 of 38 Doc # 770-00023.1 Jan. 23, 2015 Table of Contents Purpose & Applicability of This Guide 2 Special Considerations and Safety Warnings 3 Table of Contents 4 1. Introducing Intelligent Backhaul Radio (“IBR”) 6 1.1 Overview ......................................................................................................................................................... 6 1.2 IBR Models - Transmit & Receive Frequencies ................................................................................................ 6 1.3 Radio Features ................................................................................................................................................ 6 1.4 Switch Features .............................................................................................................................................. 6 1.5 Deployment Options ....................................................................................................................................... 7 1.6 Physical & Environmental Features ................................................................................................................ 7 2. Getting Started 8 2.1 Physical Inspection.......................................................................................................................................... 8 2.2 Inventory ......................................................................................................................................................... 8 2.3 External Features ............................................................................................................................................ 9 2.4 Power Requirements ...................................................................................................................................... 9 2.5 Technical Assistance ..................................................................................................................................... 10 3. Communicating with IBR 10 3.1 Serial Console ............................................................................................................................................... 10 3.2 Graphical User Interface (“GUI” or “Web UI”) .............................................................................................. 11 3.3 Command Line Interface (“CLI”) ................................................................................................................... 11 3.4 Access Control – Factory-Set User Names & Passwords ............................................................................... 11 3.5 Gigabit Ethernet Ports & Interfaces .............................................................................................................. 12 3.6 External Ethernet Connectors ....................................................................................................................... 13 3.7 Power Connector .......................................................................................................................................... 13 3.8 LEDs .............................................................................................................................................................. 13 4. Preconfiguring IBRs 13 4.1 Power ............................................................................................................................................................ 13 4.2 CLI Privileged Mode ................................................................................…

Text truncated - open the document above for the full version.

D C B A 8 7 6 5 12 3 4 B C D A 4 3 2 1 56 8 PROPRIETARY AND CONFIDENTIAL DIMENSIONS IN MILLIMETERS TOLERANCES UNLESS OTHERWISE SPECIFIED: ANGULAR/BEND: 0.5 X.X: 0.25 X.XX: 0.1 X.XXX: 0.05 2460 N. 1st STREET SUITE 200 San Jose, CA 95131 This document and the specifications andinformation contained herein are the exclusiveproperty of Fastback Networks and shall notbe copied, reproduced, or disclosed outside ofFastback Networks except as required toexecute the terms of a contract or purchaseorder issued by Fastback Networks. Theyshall not be included in any proposal orpresentation materials without prior writtendirection of Fastback Networks. 7 REV DESCRIPTION INITIALS CONTROL # DATE 01 INITIAL RELEASE LN ECO-000245 21-OCT-14 18 of 1 Sheet: N/A Finish: SEE BOM Material: 4:5 Scale: 03-OCT-14 Date: L.NICOLI Drawn By: L.NICOLI Eng: D Size: 01 Rev: 715-00017 Doc.#: DRW, TOP LEVEL ASSY, IBR 1201, MOAB Title: Bill Of Materials Description Part Number Qty Item CAP, C1 PROTECTIVE W/RETAINER 320-00005 1 1 CONN, PANEL MOUNT, SFP 330-00113 2 2 PCB, EXTENDER, SFP PCBA MODULE 370-00054 1 3 LABEL, IBR, MODEL/SERIAL 421-00003 1 4 LABEL, IBR, 5.5/5.7, AGENCY CERTIFICATIONS 421-00006 1 5 CHASSIS, IBR BASE 430-00005 1 6 HEAT SINK, CATALINA, IBR 430-00007 1 7 STRAIN RELIEF, IBR, RX ANTENNA CABLES 430-00021 1 8 IBR ANTENNA FRAME, w/DFS MOUNTING 430-00030 2 9 SHIELD, IBR, MAIN PCBA, MOAB 430-00034 1 10 SHIELD SLEEVE, DFS CONNECTOR, MOAB 430-00035 1 11 SHIELD SLEEVE, TX ANTENNA, MOAB 430-00036 1 12 ENCLOSURE, DFS ANTENNA, RADOME 432-00009 1 13 ENCLOSURE, DFS ANTENNA, COVER 432-00010 1 14 ENCLOSURE, ANTENNA RADOME, IBR MAIN, EU 432-00011 1 15 PLASTIC KEYING SLEEVE, SFP EXTENDER PCB CONNECTOR 432-00013 1 16 GASKET, IBR CHASSIS 455-00003 1 17 VENT, SNAP-FIT 455-00004 1 18 CAP, PROTECTIVE, ROUND VINYL, BLACK 455-00006 1 19 O-RING, 10.5MM OD X 2.5MM WIDE 455-00007 1 20 GASKET, DFS ANTENNA RADOME COVER 455-00008 1 21 GASKET, DFS ANTENNA RADOME 455-00009 1 22 PROTECTIVE CAP, SFP PANEL CONNECTOR 455-00010 2 23 THERMAL PAD, 2.0MM THICK, 10 X10 457-00001 2 24 THERMAL PAD, 2.0MM THICK, 20 X 20 457-00001 1 25 THERMAL PAD, 2.0MM THICK, 32 X 32 457-00001 1 26 THERMAL PAD, 2.0MM THICK, 40 X 40 457-00001 1 27 THERMAL PAD, 2.0MM THICK, 45 X 19 457-00001 1 28 SCREW, M4 X .7 X 10.0MM, PH PHIL/INT SEMS, SS 470-00015 16 29 RIVET, SNAP, PLASTIC 470-00018 6 30 RIVET, SNAP, 2.2DIA, 2.9/3.6 GRIP, PLASTIC 470-00019 16 31 SCREW, M3 X .5 X 7.0MM, PH TORX/INT SEMS, SS 470-00021 50 32 SCREW, M3 X .5 X 14.0MM, PH TORX/INT SEMS, STL, ZN 470-00026 2 33 SCREW, 12-24 X 1/2", PH Combo, STL, GRN ZN 470-00027 2 34 SCREW, THREAD FORMING, K30 X 10.0MM, TX-PN-PF-S 470-00030 4 35 WIRE SADDLE, MINI SNAP IN 495-00006 14 36 CABLE CLAMP, N-SERIES, 1/2" CLAMPING 495-00008 1 37 ROUTING CLIP, HALF-U, 3.2MM HOLDING DIA., SCREW-TYPE 495-00011 2 38 (SEE BOM FOR SPECIFIC PART NUMBER AND DESCRIPTION) 820-XXXXX 1 39 (SEE BOM FOR SPECIFIC PART NUMBER AND DESCRIPTION) 820-XXXXX 4 40 SUB-ASSY, MECH, ANTENNA, EU DFS 820-00043 1 41 PWA, SFP Module, IBR 830-00003 1 42 (SEE BOM FOR SPECIFIC PART NUMBER AND DESCRIPTION) 830-XXXXX 1 43 (SEE BOM FOR SPECIFIC PART NUMBER AND DESCRIPTION) 830-XXXXX 1 44 CABLE, IP66 TWO COLOR LED (GREEN/YELLOW) TO CONNECTOR 840-00001 2 45 CABLE, IBC/IBR CONSOLE, IP67, 4 PIN C1 BULKHEAD TO MOLEX 51090 840-00003 1 46 CABLE, IP67, BULKHEAD RJ45 F TO RJ45 M, 300MM 840-00011 1 47 CABLE ASSY, I-PEX /I-PEX,DOUBLE SHIELDED COAXIAL (BLACK), 320mm 840-00019 4 48 CABLE ASSY, I-PEX /I-PEX,DOUBLE SHIELDED COAXIAL (BLACK), 432mm 840-00020 4 49 CABLE ASSY, MICRO COAXIAL TO MMCX STRAIGHT PLUG, 230MM 840-00028 2 50 CABLE ASSY, MICRO COAXIAL TO MMCX R/A PLUG, 200MM 840-00029 1 51 CABLE ASSY, DIGITAL I/O, 15 PIN/20 PIN, HIROSE 840-00030 1 52 ASSEMBLY NOTES: 1 FASTENER DRIVE SIZES ( REFER TO TABLE 1 FOR TORQUE SPECS): T-10 TORX FOR ALL TORX SCREWS #2 PHILIPS FOR PHILIP SCREWS 2 USE TABLE 2 FOR WIRING CONNECTION REFERENCE DESIGNATORS. 3 HAND TIGHTEN ALL CAPS. B C D A D C B A 8 7 6 5 1234 4 3 2 1 56 8 7 18 of 16 Sheet FASTBACK Networks 4:5 Scale: 01 Rev: 715-00017 Doc. #: DRW, TOP LEVEL ASSY, IBR 1201, MOAB Title: 4 5 19 AGENCY CERTIFICATION LABEL MODEL/SERIAL NUMBER LABEL 34 1 23 4 REF 5 REF REV DESCRIPTIONINITIALS CONTROL#DATE 12-DEC-14 PROPRIETARY AND CONFIDENTIAL This document and the specifications and information contained herein are the exclusive property of Fastback Networks and shall not be copied, reproduced, or disclosed outside of Fastback Networks except as required to execute the terms of a contract or purchase order issued by Fastback Networks. They shall not be included in any proposal or presentation materials without prior written direction of Fastback Networks. 2460 N. 1st STREET SUITE 200 San Jose, CA 95131 Title: Doc #: Rev: Engineer:Drawn by: Size: A Material:Finish: Scale: 1:1 Sheet: 1 of 1 SEE NOTESSEE NOTES H. STEINBACH 01 G YUE 01 GY ECO-000260 DIMENSIONS IN MILLIMETERS. TOLERANCES UNLESS OTHERWISE SPECIFIED: ANGULAR/BEND: +/- 1 degree X.X: +/- 0.25 X.XX: +/- 0.1 X.XXX: +/- 0.05 421-00017 LABEL, MOAB XR IBR, 5.8, AGENCY CERTIFICATIONS, NA NOTES: 1. GREY LINES ARE FOR LABEL REFERENCE ONLY. 2. MATERIAL: SEE BOM. 3. ALL MATERIALS MUST BE RoHS COMPLIANT PER EU DIRECTIVE 2002/95/EC. 4. PRINTING RIBBON SHALL BE RESIN. PRINTING SHALL COMPLY WITH UL RECOGNIZED UNDER UL969 (CLASS CODE PGDQ2 OR PGGU2). INITIAL RELEASE PART NUMBERQTYDESCRIPTION 422-000011 LABEL STOCK, 95MM X 20MM, WHITE POLYESTER, W/CLEAR COAT 710-000XY1 ARTWORK, XR IBR, 5.8 AGENCY CERTIFICATIONS, NA FCC-ID: 2AAEH-105 IC: 11158-105 Rated: IP-66 Patents:www.fastbacknetworks.com/patents This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful intereference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 421-00017

FCC Part 1 Subpart I FCC Part 2 Subpart J INDUSTRY CANADA RSS 102 ISSUE 3 RF EXPOSURE REPORT FOR Intelligent Backhaul Radio MODEL NUMBER: IBR-121x-38-NA, IBR-121x-83-NA FCC ID: 2AAEH-106, 2AAEH-105 REPORT NUMBER: 14U18830-5 ISSUE DATE: JANUARY 14, 2015 Prepared for CBF NETWORKS, INC., DBA FASTBACK NETWORKS 2460 N. FIRST STREET, SUITE 200 SAN JOSE, CA 95131 Prepared by UL VERIFICATION SERVICES INC. 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888 REPORT NO: 14U18830-5 DATE: JANUARY 14, 2015 FCC ID: 2AAEH-106, 2AAEH-105 Page 2 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701J 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. Revision History Rev. Issue Date Revisions Revised By -- 1/14/15 Initial Issue F. de Anda REPORT NO: 14U18830-5 DATE: JANUARY 14, 2015 FCC ID: 2AAEH-106, 2AAEH-105 Page 3 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701J 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 4 2. TEST METHODOLOGY ..................................................................................................... 5 3. REFERENCES ................................................................................................................... 5 4. FACILITIES AND ACCREDITATION ................................................................................. 5 5. MAXIMUM PERMISSIBLE RF EXPOSURE ....................................................................... 6 5.1. FCC RULES ................................................................................................................ 6 5.2. IC RULES .................................................................................................................... 7 5.3. EQUATIONS ................................................................................................................ 8 5.4. LIMITS AND IC EXEMPTION ...................................................................................... 9 6. RF EXPOSURE RESULTS ................................................................................................10 REPORT NO: 14U18830-5 DATE: JANUARY 14, 2015 FCC ID: 2AAEH-106, 2AAEH-105 Page 4 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701J 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. 1. ATTESTATION OF TEST RESULTS COMPANY NAME: CBF NETWORKS, INC., DBA FASTBACK NETWORKS 2460 N. FIRST STREET, SUITE 200 SAN JOSE, CA 95131 EUT DESCRIPTION: Intelligent Backhaul Radio MODEL: (5.2) IBR-121x-38-NA, (5.8) IBR-121x-83-NA SERIAL NUMBER: 40314120006 (conducted) 40314380089 (radiated) 40314380088 (conducted) 40314390023 (radiated) DATE TESTED: October 21, 2014 – January 8, 2015 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 1 SUBPART I & PART 2 SUBPART J Pass INDUSTRY CANADA RSS 102 ISSUE 3 Pass UL Verification Services Inc. calculated the RF Exposure of the above equipment in accordance with the requirements set forth in the above standards, using test results reported in the test report documents referenced below and/or documentation furnished by the applicant. All indications of Pass/Fail in this report are opinions expressed by UL Verification Services Inc. based on interpretations of these calculations. The results show that the equipment is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by UL Verification Services Inc. and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by UL Verification Services Inc. will constitute fraud and shall nullify the document. This report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, any agency of the Federal Government, or any agency of any government. Approved & Released For UL Verification Services Inc. By: Tested By: Francisco deAnda Joey Gomez PROJECT LEAD/ PROGRAM MANAGER EMC ENGINEER UL VERIFICATION SERVICES INC. UL VERIFICATION SERVICES INC. REPORT NO: 14U18830-5 DATE: JANUARY 14, 2015 FCC ID: 2AAEH-106, 2AAEH-105 Page 5 of 11 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701J 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. 2. TEST METHODOLOGY All calculations were made in accordance with FCC OET Bulletin 65 Edition 97-01 and IC Safety Code 6. 3. REFERENCES All measurements were made as documented in test report UL Verification Services Inc. document 14U18830-1 for operation in the 5.2 GHz band and 14U18830-2 for operation in the 5.8 GHz band. Output power, Duty cycle and Antenna gain data is excerpted from the applicable test reports. Antenna gain data is excerpted from product documentation provided by the applicant. 4. FACILITIES AND ACCREDITATION The test sites and measurement facilities used to collect data are located at 47173 and 47266 Benicia Street, Fremont, California, USA. Line conducted emissions are measured only at the 47173 address. The following table identifies which facilities were utilized for radiated emission measurements documented in this report. Specific facilities are also identified in the test results sections. 47173 Benic…

Text truncated - open the document above for the full version.

FCC 47 CFR PART 15 SUBPART C CERTIFICATION TEST REPORT FOR Intelligent Backhaul Radio MODEL NUMBER: IBR-121x-83-NA FCC ID: 2AAEH-105 REPORT NUMBER: 14U18830-2 Revision A ISSUE DATE: JANUARY 14, 2015 Prepared for CBF NETWORKS, INC., DBA FASTBACK NETWORKS 2460 N. FIRST STREET, SUITE 200 SAN JOSE, CA 95131, USA Prepared by UL VERIFICATION SERVICES INC. 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888 REPORT NO: 14U18830-2A DATE: JANUARY 14, 2015 MODEL: IBR-121x-83-NA FCC ID: 2AAEH-105 Page 2 of 110 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701J 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. . Revision History Rev. Issue Date Revisions Revised By -- 1/9/15 Initial Issue F. De Anda A 1/14/15 Update to Output power section rule reference F. De Anda REPORT NO: 14U18830-2A DATE: JANUARY 14, 2015 MODEL: IBR-121x-83-NA FCC ID: 2AAEH-105 Page 3 of 110 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701J 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. . TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS ................................................................................. 5 2. TEST METHODOLOGY ..................................................................................................... 6 3. FACILITIES AND ACCREDITATION ................................................................................. 6 4. CALIBRATION AND UNCERTAINTY ................................................................................ 6 4.1. MEASURING INSTRUMENT CALIBRATION .............................................................. 6 4.2. SAMPLE CALCULATION ............................................................................................ 6 4.3. MEASUREMENT UNCERTAINTY ............................................................................... 6 5. EQUIPMENT UNDER TEST ............................................................................................... 7 5.1. DESCRIPTION OF EUT .............................................................................................. 7 5.2. MAXIMUM OUTPUT POWER...................................................................................... 7 5.3. DESCRIPTION OF AVAILABLE ANTENNAS .............................................................. 7 5.4. SOFTWARE AND FIRMWARE .................................................................................... 7 5.5. WORST-CASE CONFIGURATION AND MODE .......................................................... 7 5.6. DESCRIPTION OF TEST SETUP ................................................................................ 8 6. TEST AND MEASUREMENT EQUIPMENT ......................................................................11 7. MEASUREMENT METHODS ............................................................................................12 8. ANTENNA PORT TEST RESULTS ...................................................................................13 8.1. ON TIME AND DUTY CYCLE .....................................................................................13 8.2. 10MHz 2Tx MODE IN THE 5.8 GHz BAND.................................................................15 8.2.1. 6 dB BANDWIDTH ...............................................................................................15 8.2.2. OUTPUT POWER ...............................................................................................19 8.2.3. POWER SPECTRAL DENSITY ...........................................................................24 8.2.4. OUT-OF-BAND EMISSIONS ...............................................................................28 8.3. 20MHz 2Tx MODE IN THE 5.8 GHz BAND.................................................................36 8.3.1. 6 dB BANDWIDTH ...............................................................................................36 8.3.2. OUTPUT POWER ...............................................................................................40 8.3.3. POWER SPECTRAL DENSITY ...........................................................................45 8.3.4. OUT-OF-BAND EMISSIONS ...............................................................................49 8.4. 40MHz 2TX MODE IN THE 5.8 GHz BAND ................................................................57 8.4.1. 6 dB BANDWIDTH ...............................................................................................57 8.4.2. OUTPUT POWER ...............................................................................................61 8.4.3. POWER SPECTRAL DENSITY ...........................................................................66 8.4.4. OUT-OF-BAND EMISSIONS ...............................................................................70 9. RADIATED TEST RESULTS .............................................................................................77 9.1. LIMITS AND PROCEDURE ........................................................................................77 REPORT NO: 14U18830-2A DATE: JANUARY 14, 2015 MODEL: IBR-121x-83-NA FCC ID: 2AAEH-105 Page 4 of 110 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701J 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. . 9.2. TRANSMITTER ABOVE 1 GHz ..................................................................................78 9.2.1. TX ABOVE 1 GHz 10MHz 2TX MODE IN THE 5.8 GHz BAND ...........................78 9.2.2. TX ABOVE 1 GHz 20MHz 2TX MODE IN THE 5.8 GHz BAND ...........................84 9.2.3. TX ABOVE 1 GHz 40MHz 2TX MODE IN THE 5.8 GHz BAND ............…

Text truncated - open the document above for the full version.

REPORT NO: 14U18830-2A DATE: JANUARY 14, 2015 MODEL: IBR-121x-83-NA FCC ID: 2AAEH-105 Page 105 of 110 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701J 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. . 11. SETUP PHOTOS ANTENNA PORT CONDUCTED RF MEASUREMENT SETUP ANTENNA PORT CONDUCTED PHOTO REPORT NO: 14U18830-2A DATE: JANUARY 14, 2015 MODEL: IBR-121x-83-NA FCC ID: 2AAEH-105 Page 106 of 110 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701J 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. . RADIATED RF MEASUREMENT SETUP (BELOW 1 GHz) RADIATED FRONT PHOTO (BELOW 1 GHz) RADIATED BACK PHOTO (BELOW 1 GHz) REPORT NO: 14U18830-2A DATE: JANUARY 14, 2015 MODEL: IBR-121x-83-NA FCC ID: 2AAEH-105 Page 107 of 110 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701J 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. . RADIATED RF MEASUREMENT SETUP (ABOVE 1 GHz) RADIATED FRONT PHOTO (ABOVE 1 GHz) RADIATED BACK PHOTO (ABOVE 1 GHz) REPORT NO: 14U18830-2A DATE: JANUARY 14, 2015 MODEL: IBR-121x-83-NA FCC ID: 2AAEH-105 Page 108 of 110 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701J 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. . RF MEASUREMENT SETUP 18-26GHz REPORT NO: 14U18830-2A DATE: JANUARY 14, 2015 MODEL: IBR-121x-83-NA FCC ID: 2AAEH-105 Page 109 of 110 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701J 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. . RF MEASUREMENT SETUP 26-40GHz REPORT NO: 14U18830-2A DATE: JANUARY 14, 2015 MODEL: IBR-121x-83-NA FCC ID: 2AAEH-105 Page 110 of 110 UL VERIFICATION SERVICES INC. FORM NO: CCSUP4701J 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL Verification Services Inc. . POWERLINE CONDUCTED EMISSIONS MEASUREMENT SETUP END OF REPORT LINE CONDUCTED FRONT PHOTO LINE CONDUCTED BACK PHOTO