2AAEM-HXEP250HMDX CRAZE BUDS-BLUETOOTH HEADSET

Por manual de instrucciones e información de garantía en español visítenos en www.hmdxaudio.com The HMDX Craze has friends—like lots of them. Invite them along next time for an even more epic night. You can check out all their online profiles at www.hmdxaudio.com. Setup is pretty easy, but we put a manual together just in case you need it. It’s full of information and sarcasm—just like that English teacher you had that crazy semester. Package Contents Allow Us to Shed Some Light Like any amazing couple, this one starts with a connection—one between your device and the earbud’s Bluetooth. Here’s how it works: 1. We know you’re probably going to think, “derp” with this one, but we have to say it: Make sure the smartphone, tablet or computer you want to hook up to the earbuds has Bluetooth. (There. We got that out of the way.) 2. Turn on the earbuds and look for the little blinking light. 3. Do whatever your device needs you to do on its end. (We don’t know what you’re using. We’re not spies.) 4. Look for HMDX CRAZE in your device’s Bluetooth list or click YES—whatever pops up on your device—and BAM you’re connected. 5. Now hit PLAY on your earbuds and crank it up—or down if you’re lame. You’re probably only going to have to do this once, unless your device goes through a major I-just-dropped-it-in-the-pool kind of reboot. The device and Bluetooth will find each other every time just as long as the earbuds are set to Bluetooth and your device’s Bluetooth is, you know—on. If you’re connecting to a computer, you may have some extra steps on that end. You’ll have to get that information from the computer company. Depending on your device you may be prompted to enter a pairing code. If prompted enter “0000” as the code. To clear the pairing history hold the POWER button for 8 seconds. Note: If you turn on your Craze Earbuds but haven’t started the party, they will automatically power off after 2 minutes of unpaired inactivity. Bluetooth ® Connection: It’s a Setup CHARGE Flashing RedLow Battery Charging Fully Charged Red (when plugged in) Light turns off (while plugged in) Quick Blue Flash Reconnect Mode Slow Blue FlashConnected Quick Blue/Red Flashing Pairing Mode What It Looks Like What it Means HX-EP250 Hey. Have we seen you here before? Register your earbuds at www.hmdxaudio.com. Information like where you bought it and how you’re using it is like gold for the people who make these earbuds. Do them a solid, will ya? USER GUIDE AND WARRANTY INFORMATION 1 3 2 2 4 5 Control Your Destiny...or at Least Your Earbuds 1. That’s the power button, press and hold for 5 seconds to power on. 2. Turn the music up or down. (Wait, why do you need to turn it down?) 3. Push it to play, push it again to pause. 4. That light lets you know when your device is charging and when Bluetooth has the hook-up. 5. The power cord goes here. Charging the earbuds is so easy you’ve probably figured it out by now, but just in case, you’ve got two options: your computer or a wall outlet. 1. The cord that came with the earbuds —the one with the USB on one end and the Micro USB on the other—will work with your computer. 2. If you want to use the wall outlet, you’ll need to pick up a power cord with a Micro USB the next time you’re at the store, or use any USB AC adapter, including the one for your cell. Now go get ready for an epic night while your earbuds do too. They need about 3 hours of me time for 4 hours of party time. Just Charge It User ManualCharging CordEarbuds Ear Hooks Ear Tips Por manual de instrucciones e Información de garantía en español visítenos en www.hmdxaudio.com ©2014 HMDX. All Rights Reserved. IB-HXEP250 A soft, dry towel is all you need to clean off your earbuds. Using water, harsh cleaners or anything else only starts messing with the mechanics inside. So, yeah, don’t do it. Coming Clean FCC Disclaimer: Note: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Note: Changes or modifications not expressly approved by HMDX could void the user's authority to operate this equipment. Stuff The Government Makes Us Say For detailed Warranty Instructions and Information visit: http://www.hmdxaudio.com/customer-support/warranty-1yr To obtain warranty service on your HMDX product, contact a Consumer Relations Representative by telephone at 1-800-753-3000 or email [email protected] for assistance. Please make sure to have the model number of the product available. Representatives are available 8:30am - 7:00pm EST Monday-Friday. One Year Limited Warranty READ ALL INSTRUCTIONS BEFORE USING • WARNING: To avoid hearing damage, make sure that the volume on your device is turned down before powering on your earbuds. • Use this product onl…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Page 1 of 1 Test Lab Attestation Letter Date of Test: 2013-11-27 to 2013-12-02 Applicant Name: Cosonic Acoustic Technology Co., Ltd FCC ID: 2AAEM-HXEP250 Test Items: Antenna Requirement, AC Power Line Conducted Emission, Conducted Peak Output Power, 20dB Occupied Bandwidth, Carrier Frequencies Separation, Hopping Channel Number, Dwell Time, Pseudorandom Frequency Hopping Sequence, Band-edge for RF Conducted Emissions, RF Conducted Spurious Emissions, Radiated Spurious emissions, Band Edge(Radiated Emission) Name of Engineer Performing Test: Jack Liang Statement of Compliance: SGS-CSTC Standards Technical Services Co., Ltd. declares that this Unit has been tested in accordance with the test method identified in this test report and that we observed it being tested. It also declares that the Unit complies with the relevant limits. All instrumentation and accessories used to test this unit for compliance to the indicated test method are calibrated regularly in accordance with ISO 17025:2005 requirements by laboratories accredited by A2LA, NVLAP, or ACLAS for the measurement parameters. The measurements were made at: SGS-CSTC Standards Technical Services Co., Ltd. 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technology Development District, Guangzhou, China 510663 Test Lab Witness- Signature of Test Lab Witness: Full Name, Typed: Storm Shu Title of Witness: RF Team Leader Email Address: [email protected] Phone No.: (+86)020-82155303 Test Lab Stamp:

1 Photographs - EUT Constructional Details Test model No.: HX-EP250

1 Photographs - EUT Constructional Details Test model No.: HX-EP250

SGS-CSTC Standards Technical Services Co., Ltd. No. 1 W orkshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM131100631702 Page: 1 of 5 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover page SAR Evaluation Report Application No.: SZEM1311006317RF Applicant: Cosonic Acoustic Technology Co., Ltd Manufacturer: Cosonic Acoustic Technology Co., Ltd Factory: Cosonic Electronics Technology Co, Ltd. Product Name: HMDX Craze Buds Model No.(EUT): HX-EP250 FCC ID: 2AAEM-HXEP250 Standards: 47 CFR Part 1.1307(2012) 47 CFR Part 2.1093 (2012) KDB447498D01 General RF Exposure Guidance v05 Date of Receipt: 2013-11-26 Date of Test: 2013-11-27 to 2013-12-02 Date of Issue: 2014-03-06 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM131100631702 Page: 2 of 5 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Contents Page 1 COVER PAGE ..................................................................................................................................................... 1 2 CONTENTS ......................................................................................................................................................... 2 3 GENERAL INFORMATION ................................................................................................................................ 3 3.1 CLIENT INFORMATION ......................................................................................................................................... 3 3.2 GENERAL DESCRIPTION OF EUT .......................................................................................................................... 3 3.3 TEST LOCATION .................................................................................................................................................. 3 3.4 TEST FACILITY.................................................................................................................................................... 4 3.5 DEVIATION FROM STANDARDS ............................................................................................................................. 4 3.6 ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................................... 4 3.7 OTHER INFORMATION REQUESTED BY THE CUSTOMER .......................................................................................... 4 4 SAR EVALUATION ......................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Ltd. No. 1 W orkshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM131100631701 Page: 1 of 85 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover page FCC REPORT Application No: SZEM1311006317RF Applicant: Cosonic Acoustic Technology Co., Ltd. Manufacturer: Cosonic Acoustic Technology Co., Ltd. Factory: Cosonic Electronics Technology Co, Ltd. Product Name: HMDX Craze Buds Model No.(EUT): HX-EP250 FCC ID: 2AAEM-HXEP250 Standards: 47 CFR Part 15, Subpart C (2012) Date of Receipt: 2013-11-26 Date of Test: 2013-11-27 to 2013-12-02 Date of Issue: 2014-03-06 Test Result: PASS * * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM131100631701 Page: 2 of 85 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Test Summary Test Item Test Requirement Test method Result Antenna Requirement 47 CFR Part 15, Subpart C Section 15.203/15.247 (c) ANSI C63.10 (2009) PASS AC Power Line Conducted Emission 47 CFR Part 15, Subpart C Section 15.207 ANSI C63.10 (2009) PASS Conducted Peak Output Power 47 CFR Part 15, Subpart C Section 15.247 (b)(1) ANSI C63.10 (2009) DA 00-705 PASS 20dB Occupied Bandwidth 47 CFR Part 15, Subpart C Section 15.247 (a)(1) ANSI C63.10 (2009) DA 00-705 PASS Carrier Frequencies Separation 47 CFR Part 15, Subpart C Section 15.247 (a)(1) ANSI C63.10 (2009) DA 00-705 PASS Hopping Channel Number 47 CFR Part 15, Subpart C Section 15.247 (b) ANSI C63.10 (2009) DA 00-705 PASS Dwell Time 47 CFR Part 15, Subpart C Section 15.247 (a)(1) ANSI C63.10 (2009) DA 00-705 PASS Pseudorandom Frequency Hopping Sequence 47 CFR Part 15, Subpart C Section 15.247(b)(4)&TCB Exclusion List (7 July 2002) ANSI C63.10 (2009) DA 00-705 PASS Band-edge for RF Conducted Emissions 47 CFR Part 15, Subpart C Section 15.247(d) ANSI C63.10 (2009) DA 00-705 PASS RF Conducted Spurious Emissions 47 CFR Part 15, Subpart C Section 15.247(d) ANSI C63.10 (2009) DA 00-705 PASS Radiated Spurious emissions 47 CFR Part 15, Subpart C Section 15.205/15.209 ANSI C63.10 (2009) DA 00-705 PASS Band Edge (Radiated Emission) 47 CFR Part 15, Subpart C Section 15.205/15.209 ANSI C63.10 (2009) DA 00-705 PASS SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM131100631701 Page: 3 of 85 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.…

Text truncated - open the document above for the full version.

1 Photographs - EUT Test Setup Test model No.: HX-EP250 1.1 Radiated Spurious Emission 1.2 Conducted Emission