2AAGEBTADE-ALPGateway

1 / 28 VT-M2M-B TA-DE-A User’s Manual 2 / 28 Chengdu Vantron Technology, Ltd. www.vantrontech.com 3 / 28 Table of Contents 1 Foreword ........................................................................................... 5 1.1 Copyright Notice ..................................................................... 5 1.2 Notes ............................................................................ 5 1.3 Statement ............................................................................ 6 1.4 Disclaimer ............................................................................ 6 1.5 Limitation of Liability/Non-warranty ...................................... 6 1.6 Safety Instructions ................................................................... 7 1.7 Precautions ............................................................................ 7 1.8 Safety Instructions for Power Cables and Accessories ............ 7 1.9 Cleaning Instructions ............................................................... 8 2 Overview ........................................................................................... 9 2.1 Introduction ............................................................................ 9 2.2 Product Series .......................................................................... 9 2.2.1 Product Order Coding Rule ....................................... 9 2.2.2 Ordering Information .............................................. 10 3 VT-M2M-B TA-DE-A Hardware Instructions .............................. 11 3.1 Product Appearance ............................................................... 11 To p View .......................................................................................... 12 3.2 Specifications ......................................................................... 13 3.3 Interface Description .............................................................. 15 3.3.1 Wide-Range Power Interface ................................... 15 3.3.2 Ethernet Interface .................................................... 15 3.3.3 D Sub-9 RS232 Connector ...................................... 16 3.3.4 VGA Interface ......................................................... 18 3.3.5 USB Host Connector ............................................... 19 4 / 28 3.4 Operation Notice .................................................................... 20 3.4.1 Change SIM Card .................................................... 20 3.4.2 Power Supply .......................................................... 20 4 Tips .................................................................................................. 21 5 / 28 1 Foreword 1.1 Copyright Notice While all information contained herein have been carefully checked to assure its accuracy in technical details and printing, Vantron assumes no responsibility resulting from any error or features of this manual, or from improper uses of this manual or the software. Please contact our technical department for relevant operation solutions if there is any problem that cannot be solved according to this manual. Vantron reserves all rights of this manual, including the right to change the content, form, product features, and specifications contained herein at any time without prior notice. The latest version of this manual is at www.vantrontech.com.cn. Please contact Vantron for further information: Vantron Technology （Vantron） E-mail: [email protected] The trademarks and registered trademarks in this manual are properties of their respective owners. No part of this manual may be copied, reproduced, translated or sold. No changes or other purposes are permitted without the prior written consent of Vantron. Vantron reserves the right of all publicly-released copies of this manual. 1.2 Notes Applicable notes are listed in the following table: 6 / 28 Sign Notice Type Description Notice Important information and regulations Caution Caution for latent damage to system or harm to personnel 1.3 Statement It is recommended to read and comply with this manual before operating VT-M2M-BTA-DE-A which provides important guidance and helps decreasing the danger of injury, electric shock, fire, or any damage to the device. 1.4 Disclaimer Vantron assumes no legal liability of accidents resulting from failure of conforming to the safety instructions. 1.5 Limitation of Liability/Non-warranty For direct or indirect damage to this device or other devices of Vantron caused by failure of conforming to this manual or the safety instructions on device label, Vantron assumes neither warranty nor legal liability even if the device is still under warranty. The VT-M2M-BTA-DE-A should be installed, debugged and maintained by professional people. The outside antennas are not permitted to be installed or to be changed by non-professional people. To run the device normally, only specify antennas are approved to be assembled together by professional people. Unit shall be used with indoor-use antenna only. No antenna for this unit can be installed outdoor. 7 / 28 1.6 Safety Instructions  Keep and comply with all operation instructions, warnings, and information.  Pay attention to warnings on this device.  Read the following precautions so as to decrease the danger of injury, electric shock, fire, or any damage to the device.  Operations and Service instructions are provided with the equipment.  Unit shall be used with indoor-use antenna only. No antenna for this unit can be installed outdoor.  The maximum operation temperature is 61°C. 1.7 Precautions  Pay attention to the product labels/safety instructions printed on silk screens.  Do not try repairing this product unless declared in this manual.  Keep away from heat source, such as heater, heat dissipater, or engine casing.  Do not insert other items into the slot (if any) of this device. • Keep the ventilation slot ventilated for cooling. •System fault may arise if other items are inser…

Text truncated - open the document above for the full version.

Company Name: Chengdu Vantron Technology, Ltd. Address: No.5 GaoPeng Road, Hi-Tech Zone, Chengdu, SiChuan, P.R. China 610045 Telephone: 86-28-8512-3930 Email: [email protected] Version: 20160531 Model Difference Statement Current Date: 2020/5/11 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AAGEBTADE-ALP We , Chengdu Vantron Technology, Ltd., hereby declare that product name: Gateway, multi-listing model number: VT-M2M-BTA-DE-ALP is (are) electrically identical to test model number: VT-M2M-BTA-DE-A , the differences below, Model Name: GPIO/CAN/RS232/485 port GPS Module Test model VT-M2M-B TA-DE-A √ √ Multi-listing model VT-M2M-B TA-DE-ALP x x Note: “√” means “ EUT with GPIO/CAN/RS232/485 port and GPS Module”, “x” means “EUT without GPIO/CAN/RS232/485 port and GPS Module”. The changes above-mentioned will not affect the RF power and other RF parameters. We guarantee all information above-mentioned is true, and notice that we’ll bear all the consequences caused by any false information or concealing Sincerely, Signature Name/Title: X i Wa ng/ VP Phone: 86-28-8512-3930 Email: [email protected]

Company Name: Chengdu Vantron Technology, Ltd. Address: No.5 GaoPeng Road, Hi-Tech Zone, Chengdu, SiChuan, P.R. China 610045 Telephone: 86-28-8512-3930 Email: [email protected] QA-FR-170-B FCC Authorization Current Date: 2020/5/11 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern: We Chengdu Vantron Technology, Ltd., the undersigned, Hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratory Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. Sincerely Yours, Client’s Signature: Client’s Name/Title: Xi Wang/VP Phone: 86-28-8512-3930 Email: [email protected]

EXHIBIT B – EUT EXTERNAL PHOTOGRAPHS Tested Model: VT-M2M-BTA-DE-A Top View Bottom View WiFi Antenna GPS Antenna Zigbee Antenna Bluetooth Antenna 4G Second Antenna 4G Primary Antenna Front View Rear View Left Side View Right Side View 2.4G WiFi Antenna View Bluetooth Antenna View Zigbee Antenna View 4G Antenna View GPS Antenna View Multiple Model: VT-M2M-BTA-DE-ALP Top View Bottom View WiFi Antenna Zigbee Antenna Bluetooth Antenna 4G Second Antenna 4G Primary Antenna Front View Rear View Left Side View Right Side View Adapter View

EXHIBIT A -LABELING AND LOCATION Label Label Location

EXHIBIT C – EUT INTERNAL PHOTOGRAPHS Tested Model: VT-M2M-BTA-DE-A Uncovered 1 View Uncovered 2 View Uncovered 3 View Uncovered 4 View Uncovered 5 View PCB 1 Top View PCB 1 Bottom View PCB 2 Top View PCB 2 Bottom View Hard Disk Top View Hard Disk Bottom View GPS Module Top View GPS Module View WiFi/BT Module Top View WiFi/BT Module Bottom View Zigbee Module Top View Zigbee Module Bottom View 4G Module Top View 4G Module Bottom View Multiple Model: VT-M2M-BTA-DE-ALP Uncovered 1 View Uncovered 2 View Main Board Top View Main Board Bottom View

Bay Area Compliance Laboratories Corp. (Chengdu) Report No.: RSC200305002-0D Page 11 of 70 FCC §15.247 & §1.1310 & §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE) Applicable Standard According to subpart 15.247 and subpart §1.1310, systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Limits for Maximum Permissible Exposure (MPE) (§1.1310, §2.1091) (B) Limits for General Population/Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Averaging Time (minutes) 0.3–1.34 614 1.63 ※(100) 30 1.34–30 824/f 2.19/f ※(180/f²) 30 30–300 27.5 0.073 0.2 30 300–1500 / / f/1500 30 1500–100,000 / / 1.0 30 f = frequency in MHz; ※ = Plane-wave equivalent power density; According to §1.1310 and §2.1091 RF exposure is calculated. Per 447498 D01 General RF Exposure Guidance v06, simultaneous transmission MPE test exclusion applies when the sum of the MPE for all simultaneous transmitting antennas incorporated in a host device, based on the calculated/estimated, numerically modeled or measured field strengths or power density, is ≤ 1.0. Calculated Formulary: Predication of MPE limit at a given distance S = PG/4πR² Where: S = power density (in appropriate units, e.g. mW/cm 2 ); P = power input to the antenna (in appropriate units, e.g., mW); G = power gain of the antenna in the direction of interest relative to an isotropic radiator, the power gain factor, is normally numeric gain; R = distance to the center of radiation of the antenna (appropriate units, e.g., cm); For simultaneously transmit system, the calculated power density should comply with: Bay Area Compliance Laboratories Corp. (Chengdu) Report No.: RSC200305002-0D Page 12 of 70 Calculated Data: WiFi +Bluetooth + Zigbee module (FCC ID: QOQMGM12P3 ，Date of Grant: 2017-08-01) + WCDMA/LTE module (FCC ID: RI7LE910NAV2, Date of Grant: 2016-07-06) MPE evaluation for single transmission: Raido Mode Frequency Range (MHz) Antenna Gain Tune-up Conducted Power Evaluation Distance (cm) Power Density (mW/cm 2 ) MPE Limit (mW/cm 2 ) Ratio (dBi) (numeric) (dBm) (mW) WLAN 2412-2462 2.0 1.58 16.0 39.81 20 0.013 1.0 0.013 Zigbee 2405-2480 2.0 1.58 19.0 79.43 20 0.025 1.0 0.025 LE 1M 2402-2480 2.0 1.58 8.0 6.31 20 0.002 1.0 0.002 BT 3.0 2402-2480 2.0 1.58 7.5 5.62 20 0.002 1.0 0.002 WCDMA Band 5 824-849 3.0 2.00 24.5 281.84 20 0.112 0.55 0.204 LTE Band 5 824-849 3.0 2.00 24.0 251.19 20 0.100 0.55 0.182 WCDMA Band 2 1850-1910 5.0 3.16 24.5 281.84 20 0.177 1.0 0.177 LTE Band 2 1850-1910 5.0 3.16 24.0 251.19 20 0.158 1.0 0.158 LTE Band 4 1710-1755 5.0 3.16 24.0 251.19 20 0.158 1.0 0.158 LTE Band 12 699-716 3.0 2.00 24.0 251.19 20 0.100 0.47 0.213 LTE Band 13 777-787 3.0 2.00 24.0 251.19 20 0.100 0.52 0.192 LTE Band 17 704-716 3.0 2.00 24.0 251.19 20 0.100 0.47 0.213 MPE evaluation for simultaneous transmission: Note: Wi-Fi, Bluetooth, Zigbee&WCDMA/LTE can transmit simultaneously, MPE evaluation is as below formula: PD1/Limit1+PD2/Limit2+......＜1, PD (Power Density) The worst case is as below: MPE of WLAN + MPE of Bluetooth +MPE of Zigbee + MPE of WWAN = 0.013/1.0+0.002/1.0+0.025/1.0+0.10/0.47=0.252＜1.0 Result: MPE evaluation of single and simultaneous transmission meet the requirement of standard.

Note: This report must not be used by the customer to claim product certification, approval, or endorsement by A2LA, or any agency of the Federal Government. BACL is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with an asterisk ‘*’. Customer model name, addresses, names, trademarks etc. are not considered data. This report cannot be reproduced except in full, without prior written approval of the company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. FCC PART 15.247 TEST REPORT For Chengdu Vantron Technology, Ltd. No.5 GaoPeng Road, Hi-Tech Zone, Chengdu, SiChuan, P.R. China 610045 Report Type: Original Report Equipment Name: Gateway Report Number: RSC200305002-0D Date of Report Issue: 2020-06-10 Reviewed By: Sula Huang Prepared By: Bay Area Compliance Laboratories Corp. (Chengdu) No.5040, Huilongwan Plaza, No. 1, Shawan Road, Jinniu District, Chengdu, Sichuan, China Tel: +86-28-65525123 Fax: +86-28-65525125 www.baclcorp.com Tested Model: VT-M2M-BTA-DE-A FCC ID: 2AAGEBTADE-ALP Bay Area Compliance Laboratories Corp. (Chengdu) Report No.: RSC200305002-0D Page 2 of 70 TABLE OF CONTENTS GENERAL INFORMATION ........................................................................................................................................ 4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT) ................................................................................ 4 OBJECTIVE .................................................................................................................................................................. 4 RELATED SUBMITTAL(S)/GRANT(S) ............................................................................................................................ 4 MEASUREMENT UNCERTAINTY ................................................................................................................................... 5 TEST METHODOLOGY ................................................................................................................................................. 5 TEST FACILITY ............................................................................................................................................................. 5 SYSTEM TEST CONFIGURATION ........................................................................................................................... 6 DESCRIPTION OF TEST CONFIGURATION ................................................................................................................... 6 EQUIPMENT MODIFICATIONS ...................................................................................................................................... 6 EUT EXERCISE SOFTWARE ........................................................................................................................................ 6 SUPPORT EQUIPMENT LIST AND DETAILS .................................................................................................................. 6 EXTERNAL I/O CABLE ................................................................................................................................................. 7 BLOCK DIAGRAM OF TEST SETUP .............................................................................................................................. 7 SUMMARY OF TEST RESULTS ............................................................................................................................... 8 TEST EQUIPMENTS LIST .......................................................................................................................................... 9 FCC §15.247 & §1.1310 & §2.1091- MAXIMUM PERMISSIBLE EXPOSURE (MPE)......................................... 11 APPLICABLE STANDARD ............................................................................................................................................ 11 FCC §15.203 - ANTENNA REQUIREMENT .......................................................................................................... 13 APPLICABLE STANDARD ............................................................................................................................................ 13 ANTENNA CONNECTOR CONSTRUCTION .................................................................................................................. 13 FCC §15.207 (a) – AC LINE CONDUCTED EMISSIONS ................................................................................... 14 APPLICABLE STANDARD ............................................................................................................................................ 14 EUT SETUP ............................................................................................................................................................... 14 EMI TEST RECEIVER SETUP .................................................................................................................................... 14 TEST PROCEDURE .................................................................................................................................................... 14 CORRECTED AMPLITUDE & MARGIN CALCULATION ................................................................................................. 15 TEST DATA ................................................................................................................................................................ 15 FCC §15.209, §15.205 & §15.247(d) - SPURIOUS EMISSIONS ....................................................................... 18 APPLICABLE STANDARD ............................................................................................................................................ 18 EUT SETUP .…

Text truncated - open the document above for the full version.

EXHIBIT D - TEST SETUP PHOTOGRAPHS Conducted Emissions Test Setup Front View Conducted Emissions Test Setup Side View Radiated Emission Front View (Below 1GHz) Radiated Emission Rear View (Below 1GHz) Radiated Emission View (Above 1GHz)