2AAGMGM02SGM02S module

Preliminary Datasheet SEQUANS Communications 15-55 Boulevard Charles de Gaulle 92700 Colombes, France Phone. +33.1.70.72.16.00 Fax. +33.1.70.72.16.09 www.sequans.com [email protected] GM02S DATASHEET (PRELIMINARY)PROPRIETARY1 SEQUANS Communications 1 Product Summary 1.1General Description The Monarch 2 GM02S is an LTE Cat M1/NB1/NB2 module based on Sequans' second generation Monarch 2 chip platform. GM02S is a total module solution, including a complete, Single-SKU™ RF front end for deployment in any band worldwide, and an integrated EAL5+ Secure Element (SE) enabling the integration of the SIM inside the module with zero compromise on security while lowering cost and reducing complexity. The GM02S is part of Sequans next generation "S" family of modules, featuring a very small yet cost-effective form factor that requires no external components. GM02S leverages Sequans' 15-plus years of experience in 4G and 5G technologies and incorporates Sequans' carrier-proven LTE protocol stack and a software suite that is one of the most mature in the industry. The GM02S is part of Sequans next generation "S" family of modules, featuring a very small yet cost-effective form factor that requires no external components. The GM02S inherits Monarch's already certified LTE-M and NB-IoT stack and delivers the significantly improved performance and lower power consumption enabled by Sequans' second generation Monarch 2 chip and the new module architecture. Sequans technology, both hardware and software, is 100-percent owned by Sequans, ensuring fast time to market and lowest total cost of ownership for device makers. 1.2Frequency Bands The LTE frequency bands supported by GM02S are B1 (2100), B2 (1900 PCS), B3 (1800+), B4 (AWS-1), B5 (850), B8 (900 GSM), B12 (700 a), B13 (700 c), B14(700PS), B17(700b), B18(800Lower), B19(800Upper), B20(800DD), B25 (1900+), B26 (850+), B28 (700 APT), B66 (AWS-3), B71 (600), B85 (700 a+). PRODUCT SUMMARY APPLICATIONS 2PROPRIETARYGM02S DATASHEET (PRELIMINARY) SEQUANS Communications 1.3Applications GM02S is ideal for adding LTE-M and/or NB-IoT LTE connectivity to narrowband, low data rate M2M and IoT devices, including utility meters, industrial sensors, health and fitness bands, asset trackers, and numerous additional devices for smart home, smart city, and wearable applications. GM02S can be used by applications as slim modem controlled by an external MCU via UART. Alternatively, applications may run on GM02S' integrated MCU. 1.4Block Diagram Figure 1-1: GM02S Block Diagram ငဆ  ဆ ဇဈဇင       ! " #" $ဆ %&$ &$ '"% $င $စ   !) PRODUCT SUMMARY GENERAL FEATURES GM02S DATASHEET (PRELIMINARY)PROPRIETARY3 SEQUANS Communications 1.5General Features Note:Please contact your Sequans’ technical representative to select the applicable part number for your project. Physical CharacteristicsLGA module, 100 pads Size: 16.3 mm x 17 mm x 1.85 mm Temperature RangeOperation temperature range: -40°C to +85 °C Storage: MSL3 Power SupplyVoltage range for RF compliancy: 2.5V to 5.5V Functional voltage range: 2.2V to 5.5V Tx Power+23 dBm for each band Interfaces • Dual (U)SIM Card Interface: support for external, removable or fixed UICC. Support for integrated UICC (iUICC) with dedicated p/n • 4x High-Speed UART Interfaces with flow control, up to 921600 bauds • GPIOs, I2C, SPI, PWM, Pulse Counter, I2S/PCM, ADC LTE Features3GPP LTE Release 13/14 Cat M1/NB1/NB2 compliant. LTE Cat M1: 1.1 Mbps / 0.3 Mbps UL/DL throughput LTE Cat NB2: 160 Kbps / 120.7 Kbps UL/DL throughput Note: Cat NB1/NB2 will be supported in future module versions via software upgrade. SMSText and PDU modes Firmware UpgradeUART Interface, FOTA, Support of full and differential firmware upgrade RoHSAll hardware components are fully compliant with EU RoHS directive, halogen-free Table 1-1:Orderable Part Numbers Orderable Part Number Hardware Version Software Build (ATI1) UE Version (ATI1) PTCRB Model Name/Model SVN Orderable Status GM02RB6QRZEngineering Sample. HW Rev1 Engineering software release. Please consult your Sequans’ representative N/A0Available GM02RB6QRAEngineering Sample. HW Rev2 Engineering software release. Please consult your Sequans’ representative N/A0Not yet orderable. GM02S DATASHEET (PRELIMINARY)PROPRIETARY4 SEQUANS Communications 2 Interfaces 2.1Pin Assignment Figure 2-1: Module Pads Assignments            ဆ ဇဆ    !"# စ ဒ &    &   &   '  (  ဉဒတငတဆတဈတတတဒတဓထငဉစဉဆဉဇဉဈဉတ စဆစငဒတဈဇဆစဆငစဓစဒစတစဈ စဇစစဓထဉစထစဉ ဉဓတစတဇတဉတထဉဉဉထ ဈဒ ဈတ ဈဈ ဈဆ ဈင ဇဒ ဇတ ဇဈ ဇဆ ဇင ဆဒ ဆတ ဆဈ ဆဆ ဆစ ဉင ဈဓ ဈထ ဈဉ ဈဇ ဈစ ဇဓ ဇထ ဇဉ ဇဇ ဇစ ဆဓ ဆထ ဆဉ ဆဇ ထဆ ထဈ ထတ ထဒ ဒင ဒဆ ဒဈ ဒတ ဒဒ ဓင ဓဆ ဓဈ ဓတ ဓဒ စငင ထစ ထဇ ထဉ ထထ ထဓ ဒစ ဒဇ ဒဉ ဒထ ဒဓ ဓစ ဓဇ ဓဉ ဓထ ဓဓ စစစဆဓစင ဆဇဈစ စထစဒစဓဆင ထတဒဉ စတစဇစဈစဉ .. !/0#10# 2!314  INTERFACES ANTENNA GM02S DATASHEET (PRELIMINARY)PROPRIETARY5 SEQUANS Communications 2.2Antenna Table 2-1:Antenna Pad Details Pad #Pad NameDirectionComments 90LTE_ANTIn/OutMain Antenna, for Rx and Tx INTERFACES POWER 6PROPRIETARYGM02S DATASHEET (PRELIMINARY) SEQUANS Communications 2.3Power 2.3.1Power Details Note:Pad 1V8 is the reference voltage for IOs. It can be used to provide power small devices (100 mA maximum usage). This voltage is not available when the modem is in Deep Sleep. When the modem is in standby the voltage drops to 1.62V as per Table 2-2. Note:Reference VBAT voltage range is 2.5 V to 5.5 V for operations and 2. 2 V t o 5. 5 V f o r f u nct io n a l be ha v io r w it h p o ss ib le d eg ra d at io n o f RF performances. Figure 2-2: Timing Diagram for Power-Up Sequence Table 2-2:Power Pads Pad #Pad Name Power Group Direction Min Operational Value Typical Operational Value Max Operational Value 81V8 See note above PVDD_1V8Out1.62 V1.8 V1.98 V 73 SIM_VCC 1 PVDD_1V8Out1.62 V1.8 V1.98 V 60, 62, 63VBATN/Ain2.5 V5.5 V 1. See also Section 2.5 USIM Interfaces on page 12. Table 2-3:Electr…

Text truncated - open the document above for the full version.

FCB011_02 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless Date: Thursday, 3rd Dec,2020 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Ref: Agent letter for FCC ID: 2AAGMGM02S We, Sequans Communications 55 Boulevard Charles de Gaulle, 92700 Colombes, FRANCE hereby authorize DEKRA Testing and Certification, S.A.U. C/Severo Ochoa 2, 29590 Campanillas Mr. Álvaro Corrales Sedeño, e-mail: [email protected], Phone: +34 925 619 198 to act as our agent in the preparation of this application for equipment certification, including the signing of all documents relating to these matters. The present authorization considers the development of documents on behalf of the client, written under his own letterhead and related to the necessary information to be provided on his behalf to complete the certification process. We also hereby certify that neither we nor any party to this application are subject to a denial of U.S. Federal benefits, which include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862 because of conviction for possession or distribution of controlled substance. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by DEKRA Testing and Certification, S.A.U., still resides with us. This agreement expires one year from the current date. Sincerely, __________________________ By: Sebastien Falgayrettes Title: Director, Product and Program management Company: Sequans Communications Telephone: +33 627 991 534 e-mail: [email protected]

FCB012_02 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless Date: January 1st 2021 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Ref: Confidentiality request for FCC ID: 2AAGMGM02S To whom it may concern: Pursuant to §0.457(d)(1)(ii) and §0.459 of the Commission’s Rules (47 C.F.R.) and §552 (b)(4) of the Freedom of Information Act, Sequans Communications hereby request requests that a part of the subject FCC application be held confidential to avoid release of sensitive information of the product to the public. For the product stated above, we request that the following information be withheld from public disclose: Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Internal Photos Short Term Permanent Operation Description Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term User’s Manual Permanent Confidentiality: The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to us and provide unjustified benefits to our competitors. Short-Term Confidentiality: We hereby request short-term confidentiality for the product stated above to avoid premature release of sensitive information prior to marketing or release of the product to the public. Release date of short term confidentiality is: 45 days from grant date marked 90 days from grant date marked 135 days from grant date marked 180 days from grant date marked Specific date: We are also aware that we are responsible to notify DEKRA in the event information regarding the product or the product is made available to the public. DEKRA will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, PA __________________________ By: Sebastien Falgayrettes Title: Director, Product and Program management Company: Sequans Communications Telephone: +33627991534 e-mail: [email protected]

FCB013_02 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless Date: January 1st 2021 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Ref: FCC Modular approval letter for FCC ID: 2AAGMGM02S To whom it may concern: The following attestation addresses the requirements to support modular approval pursuant to §15.212 of the Commission’s Rules: Modular approval requirement Yes No* (i) The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. X (ii) The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation. X (iii) The modular transmitter must have its own power supply regulation. X (iv) The modular transmitter must comply with the antenna and transmission system requirements of §§15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of §15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. X (v) The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in §15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see §15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see §15.31(i)). X (vi) The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. X (vii) The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. X (viii) The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. X * Shall provide a detailed explanation if the answer is “No”. Sincerely, PA __________________________ By: Sebastien Falgayrettes Title: Director, Product and Program management Company: Sequans Communications Telephone: +33627991534 e-mail: [email protected]

FCB014_02 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless Date: January 1st 2021 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Ref: FCC Modular approval letter for FCC ID: 2AAGMGM02S To whom it may concern: The following attestation addresses the fourth requirements to support modular approval:  This device is designed for mobile or fixed operation; portable operation is subject to a Class 2 permissive change application or to a new and separate FCC ID.  The maximum antenna gain is limited to the values calculated in the RF exposure exhibit for each mode/frequency band respectively.  The product has a FCC ID label on the device itself. Also, the OEM host end product manufacturer will be informed to display a label referring to the enclosed module. The exterior label will read as follows: “Contains Transmitter Module FCC ID: 2AAGMGM02S” or “Contains FCC ID: 2AAGMGM02S”.  We request to include in the grant the following words in the device description or grant notes: “modular transmitter” or “transmitter module”. If there are any additional questions or if further information is needed, please contact us. Sincerely, PA __________________________ By: Sebastien Falgayrettes Title: Director, Product and Program management Company: Sequans Communications Telephone: +33627991534 e-mail: [email protected]

FCB015_02 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless Date: 18/01/2021 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España We, Sequans Communications, 15-55 Boulevard Charles de Gaulle Colombers, France hereby declare that the product: Type of equipment: LTE Cat-M Cellular communication module Brand name: Sequans Communications Model name: GM02S FCC ID: 2AAGMGM02S IC: 12732A-GM02S Operates only in the LTE Cat M1 bands 2, 4, 12 in USA and Canada, and the other supported bands are going to be disabled by SW in USA (FCC) and Canada (ISED). Sincerely, __________________________ By: Sebastien Falgayrettes Title: Director, Product and Program management Company: Sequans Communications Telephone: +33 627 991 534 e-mail: [email protected]

Laser Marking & Packaging SPEC Project: GM02S SQN PN: GM02RB6QRZCZ0CZ0FF USI PN: 6756-001500-04 MD USI 2020.11 © USI. All rights reserved. Laser marking © USI. All rights reserved. Box label Box label © USI. All rights reserved. Cartonlabel Cartonlabel © USI. All rights reserved. Thank You www.usish.com Realizing IDEAS Together

DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 66697RAN.001 2020-12-21 Test report No: NIE: 66697RAN.001 Assessment report RF EXPOSURE REPORT ACCORDING TO FCC 47 CFR Part 2.1091 (*) Identification of item under evaluation LTE Cat-M Cellular communication module (*) Trademark Sequans Communication (*) Model and /or type reference GM02S (*) Other identification of the product HW Version: GM02Sv1 SW Version: LR8.0.0.1-51281 FCC ID: 2AAGMGM02S IC: 12732A-GM02S IMEI TAC: 01577000 (*) Features LTE-M, 3GPP LTE Release 13 (*) Manufacturer SEQUANS COMMUNICATIONS 55 Boulevard Charles de Gaulle 92700 Colombes. France Test method requested, standard FCC 47 CFR Part 2.1091 Radiofrequency radiation exposure evaluation: mobile devices. Summary IN COMPLIANCE Approved by (name / position & signature) Miguel Lacave Antennas Lab Manager Date of issue 2020-12-21 Report template No FAN36_01 (*) “Data provided by the client” DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 66697RAN.001 Page 2 of 9 2020-12-21 Index Competences and guarantees .................................................................................................... 3 General conditions ...................................................................................................................... 3 Data provided by the client .......................................................................................................... 3 Identification of the client............................................................................................................. 3 Document history ........................................................................................................................ 3 Appendix A: FCC RF Exposure assessment result ..................................................................... 4 General description of the equipment under evaluation .......................................................... 5 Maximum Antenna Gain determination for RF Exposure compliance ..................................... 5 Appendix B: FCC RF Exposure information ................................................................................ 7 FCC RF Exposure evaluation ................................................................................................. 8 FCC MPE Evaluation ............................................................................................................. 9 FCC EIRP Limits .................................................................................................................... 9 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 66697RAN.001 Page 3 of 9 2020-12-21 Competences and guarantees In order to assure the traceability to other national and international laboratories, DEKRA Testing and Certification, S.A.U. has a calibration and maintenance program for its measurement equipment. DEKRA Testing and Certification, S.A.U. guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated on the report and, it is based on the knowledge and technical facilities available at DEKRA Testing and Certification, S.A.U. at the time of performance of the test. DEKRA Testing and Certification, S.A.U. is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Assessment Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA Testing and Certification, S.A.U. General conditions 1. This report is only referred to the item that has undergone the assessment. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of DEKRA Testing and Certification, S.A.U. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of DEKRA Testing and Certification, S.A.U. and the Accreditation Bodies Data provided by the client The following data has been provided by the client: 1. Information relating to the description of the sample ("Identification of the item tested", "Trademark", "Model and/or type reference tested", “General description of the device”). 2. Maximum output power DEKRA Testing and Certification S.A.U. declines any responsibility with respect to the information provided by the client and that may affect the validity of results. Identification of the client SEQUANS COMMUNICATIONS 55 Boulevard Charles de Gaulle 92700 Colombes. France Document history Report number Date Description 66697RAN.001 2020-12-21 First release DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 66697RAN.001 Page 4 of 9 2020-12-21 Appendix A: FCC RF Exposure assessment result DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 66697RAN.001 Page 5 of 9 2020-12-21 General description of the equipment under evaluation The equipment under evaluation consists of a multi-band module supporting cellular LTE-M release 13. As the equi…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66697RRF.001 2020-12-29 Test report No: NIE: 66697RRF.001 Test report Reference Standard: USA FCC Part 24 CANADA IC RSS-133 (*) Identification of item tested LTE Cat-M Cellular communication module (*) Trademark Sequans Communications (*) Model and /or type reference GM02S Other identification of the product HW version: GM02Sv1 SW version: LR8.0.0.1-51281 FCC ID: 2AAGMGM02S IC: 12732A-GM02S IMEI TAC: 01577000 (*) Features LTE-M, 3GPP LTE Release 13 Applicant Sequans Communications 55 Boulevard Charles de Gaulle, 92700 Colombes, France Test method requested, standard USA FCC Part 24 (10-1-19 Edition). CANADA RSS-133 Issue 6, Amendment 1, Jan. 2018. ANSI C63.26: 2015. KDB 971168 D01 Power Meas License Digital Systems v03r01, April. 2018. Summary IN COMPLIANCE Approved by (name / position & signature) Rafael López EMC Consumer & RF Lab. Manager Date of issue 2020-12-29 Report template No FDT08_23 (*) “Data provided by the client” DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66697RRF.001 Page 2 of 40 2020-12-29 Index Competences and guarantees .................................................................................................... 3 General conditions ...................................................................................................................... 3 Uncertainty ................................................................................................................................. 3 Data provided by the client .......................................................................................................... 3 Usage of samples ....................................................................................................................... 4 Test sample description .............................................................................................................. 4 Identification of the client............................................................................................................. 6 Testing period and place ............................................................................................................. 6 Document history ........................................................................................................................ 6 Environmental conditions ............................................................................................................ 6 Remarks and comments ............................................................................................................. 7 Testing verdicts ........................................................................................................................... 7 Summary .................................................................................................................................... 8 Appendix A: Test results for FCC 24 / RSS-133 .......................................................................... 9 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29507456 Report No: (NIE) 66697RRF.001 Page 3 of 40 2020-12-29 Competences and guarantees DEKRA Testing and Certification S.A.U. is a testing laboratory competent to carry out the tests described in this report. DEKRA Testing and Certification is a FCC-recognized accredited testing laboratory with appropriate scope of accreditation that include testing performed in this test report. In order to assure the traceability to other national and international laboratories, DEKRA Testing and Certification S.A.U. has a calibration and maintenance program for its measurement equipment. DEKRA Testing and Certification S.A.U. guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated on the report and it is based on the knowledge and technical facilities available at DEKRA Testing and Certification S.A.U. at the time of performance of the test. DEKRA Testing and Certification S.A.U. is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA Testing and Certification S.A.U. General conditions 1. This report is only referred to the item that has undergone the test. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of DEKRA Testing and Certification S.A.U. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of DEKRA Testing and Certification S.A.U. and the Accreditation Bodies. Uncertainty Uncertainty (factor k=2) was calculated according to the DEKRA Testing and Certification S.A.U. internal document PODT000. Data provided by the client The following data has been provided by the client: 1. Information relating to the description of the sample ("Identification of the item tested", "Trademark", "Model and/or type reference tested"). 2. The sample of the model GM02S is a multi-band module supporting cellular LTE-M Release 13. It supports HD-FDD. DEKRA Testing and Certification S.A.U. declines any responsibil…

Text truncated - open the document above for the full version.

DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 66697RRF.002 2020-12-29 Test report No: NIE: 66697RRF.002 Test report Reference Standard: USA FCC Part 27 CANADA IC RSS-130, RSS-139 (*) Identification of item tested LTE Cat-M Cellular communication module (*) Trademark Sequans Communications (*) Model and /or type reference GM02S Other identification of the product HW version: GM02Sv1 SW version: LR8.0.0.1-51281 FCC ID: 2AAGMGM02S IC: 12732A-GM02S IMEI TAC: 01577000 (*) Features LTE-M, 3GPP LTE Release 13 Applicant Sequans Communications 55 Boulevard Charles de Gaulle, 92700 Colombes, France Test method requested, standard USA FCC Part 27 (10-1-19 Edition). CANADA RSS-130 Issue 2, Feb. 2019. CANADA RSS-139 Issue 3, Jul. 2015. ANSI C63.26: 2015. KDB 971168 D01 Power Meas License Digital Systems v03r01, April 2018. Summary IN COMPLIANCE Approved by (name / position & signature) Rafael López Martín EMC Consumer & RF Lab. Manager Date of issue 2020-12-29 Report template No FDT08_23 (*) “Data provided by the client” DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía, c/ Severo Ochoa nº 2 · 29590 Campanillas · Málaga · España C.I.F. A29 507 456 Report No: (NIE) 66697RRF.002 Page 2 of 60 2020-12-29 Index Competences and guarantees .................................................................................................... 3 General conditions ...................................................................................................................... 3 Uncertainty ................................................................................................................................. 3 Data provided by the client .......................................................................................................... 3 Usage of samples ....................................................................................................................... 4 Test sample description .............................................................................................................. 4 Identification…

Text truncated - open the document above for the full version.