2AANDBT253BBluetooth headset

places with high temperature or in direct sunlight. Exposure to direct sunlight or extreme heat (such as inside a parked car) may cause damage or malfunction. • Clean the unit with a soft cloth or a damp chamois leather. Never use solvents. • The unit must only be opened by qualifi ed personnel. Headset safety To use a headset safely, please keep the following in mind: • Do not play your headset at a high volume. Hearing experts advise against continuous extended play. • If you experience ringing in your ears, turn down the volume or stop using the headset. • Do not use a headset while However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Changes or modifi cations not expressly approved by VOXX • Clean only with dry cloth. • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifi ers) that produce heat. • Refer all servicing to qualifi ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. ADDITIONAL SAFETY INFORMATION • Do not use unauthorized chargers or power adapters. Use only chargers that came with your • No use este aparato cerca del agua. • Limpie solamente con un paño seco. • No instale cerca de fuentes de calor tales como radiadores, registros de calor, estufas, u otros aparatos (incluyendo amplifi cadores) que produzcan calor. INFORMACION ADICIONAL DE SEGURIDAD • No use cargadores o adaptadores de corriente no autorizados. Utilice solamente los cargadores que vinieron con su producto o que estén listados en la guía del usuario. • El aparato no debe quedar expuesto a goteos o salpicaduras de líquidos, y, por lo tanto, no se deben colocar sobre el aparato objetos que contengan líquidos, como por ejemplo vasos. • No intente desensamblar el gabinete. Este producto no contiene componentes que requieran servicio por parte del cliente. Información importante sobre la batería Advertencia: su producto contiene una materia y un sistema de carga que están diseñados para trabajar a temperaturas que no excedan de 50°C (122°F). Dejar este producto en un automóvil cerrado o en la cajuela de un automóvil donde las temperaturas puedan exceder de 50°C puede resultar en daño permanente a la batería, fuego o explosión. Por favor retire su producto del automóvil al salir, no coloque el producto en la cajuela de su automóvil, y no deje su producto en alguna ubicación donde la temperatura pueda exceder de 50°C. Ecología Su producto debe ser eliminado apropiadamente de conformidad con las leyes y regulaciones locales. Debido a que este producto contiene una batería, esta debe ser eliminada en forma separada del desecho del hogar. Precauciones para la unidad • No utilice la unidad inmediatamente después de llevarla de un lugar frío a un lugar caliente puesto que podría producirse algún problema de condensación. • No almacene la unidad cerca del fuego, lugares con alta temperatura o a la luz directa del sol. La exposición a la luz directa del sol o a calor extremo (tal como dentro de un automóvil estacionado) puede causar daños o malfuncionamiento. • Limpie la unidad con un paño blando o con una gamuza húmeda. No utilice nunca disolventes. • La unidad deberá ser utilizada por personal cualifi cado únicamente. Seguridad de Audífonos Para usar el audífono con seguridad, por favor tome en cuenta lo siguiente: • No utilice su nuevo audífono a un alto volumen. Los expertos en el oído aconsejan contra la reproducción extendida continua. • Si usted experimenta zumbido en sus oídos, baje el volumen o deje de utilizar el audífono. • No use audífonos mientras conduce un vehículo motorizado o monta en bicicleta. Puede causar un riesgo de tráfi co y es ilegal en muchas áreas. • Aún si su audífono es del tipo para uso al aire libre diseñado para permitirle escuchar sonidos exteriores, no suba el volumen tan alto que sea imposible escuchar sonidos a su alrededor. • Nunca opere maquinaria pesada mientras escucha o utiliza sus audífonos Advertencia Excepto en caso de emergencia, VOXX Accessories Corporation recomienda no usar estos audífonos o auriculares (audífonos más micrófono) como equipo de comunicación de aviación ya que no están diseñados para muchas condiciones ambientales comunes en la aviación comercial o no comercial (incluyendo, pero sin limitarse a: altitud, temperatura, condiciones de ruido, aeronave no presurizada, etc.) resultantes en posible interferencia a comunicaciones críticas. Responsabilidad al escuchar Para evitar daño al escuchar, asegúrese que el volumen en su reproductor musical esté bajo antes de conectar sus audífonos. Después de colocar los audífonos en sus oídos, gradualmente suba el volumen hasta que alcance un nivel para escuchar confortable. Los niveles de ruido son medidos en decibeles (dB), la exposición a cualquier ruido o por encima de 85 dB puede causar pérdida gradual del sentido de la audición. Monitoree su uso; la pérdida de la audición es una función de volumen versus tiempo. A mayor nivel, menos tiempo puede usted estar expuesto a él. A menor volumen, más tiempo puede usted escucharlo. La marca, palabra y logos Bluetooth® son marcas comerciales registradas propiedad solamente de Bluetooth SIG, Inc. y cualquier…

Text truncated - open the document above for the full version.

Declaration of Conformity We JUN YE ELECTRONIC COMPANY LTD OF SHUNDE FOSHAN CITY (Name of manufacturer or his authorized representative) Zhenghe South Road, Leliu Town, Shunde District, Foshan City, Guangdong Province, China (Address) Declare under our own responsibility that the product Bluetooth Headset ♣ Model No.: JY-BT253B, JY-BT253A, JY-BT253, JY-BT289, JY-BT261, JY-BT9933, JY-BT862, JY-BT863, JY-BT232A, JY-BT232B, JY-BT232C, JY-BT233A, JY-BT233B, JY-BT233C, JY-BT236, JY-BT256, JY-BT288, JY-BT01, JY-BT02, JY-BT03, JY-BT04, JY-BT05, JY-BT06, JY-BT07, JY-BT08, JY-BT09, JY-BT301, JY-BT302, JY-BT303, JY-BT304, JY-BT305, JY-BT306, JY-BT307, JY-BT308, JY-BT309, JY-BT310, JY-BT311, JY-BT312, JY-BT313, JY-BT314, JY-BT315, JY-BT316, JY-BT317, JY-BT318, JY-BT319, JY-BT320, JY-BT321, JY-BT322, JY-BT323, JY-BT324, JY-BT325, JY-BT326, JY-BT327, JY-BT328, JY-BT329, JY-BT330, JY-BT331, JY-BT332, JY-BT333, JY-BT335, JY-BT336, JY-BT337, JY-BT338, JY-BT339, JY-BT340, JY-BT341, JY-BT342, JY-BT343, JY-BT344, JY-BT345, JY-BT346, JY-BT347, JY-BT348, JY-BT349, JY-BT350, JY-BT351, JY-BT352, JY-BT353, JY-BT354, JY-BT355, JY-BT356, JY-BT357, JY-BT358, JY-BT359, JY-BT360, JY-BT361, JY-BT362, JY-BT363, JY-BT364, JY-BT365, JY-BT366, JY-BT367, JY-BT368, JY-BT369, JY-BT370, JY-BT371, JY-BT372, JY-BT373, JY-BT374, JY-BT375, JY-BT376, JY-BT377, JY-BT378, JY-BT379, JY-BT380, JY-BT381, JY-BT382, JY-BT383, JY-BT384, JY-BT385, JY-BT386, JY-BT387, JY-BT388, JY-BT389, JY-BT390, JY-BT391, JY-BT392, JY-BT393, JY-BT394, JY-BT395, JY-BT396, JY-BT397, JY-BT398, JY-BT399, HPA88BKMBT, CHBT08, HPA88BT The electrical circuit design, layout, components used and internal wiring were identical for above models, with only difference being the appearance and model no. Besides, each model with two types, they are totally the same, but one type is assembled by manual and the other is by PC. Foshan, 2013-09-29 Li Qiang (Place, date)

Declaration of Conformity We JUN YE ELECTRONIC COMPANY LTD OF SHUNDE FOSHAN CITY (Name of manufacturer or his authorized representative) Zhenghe South Road, Leliu Town, Shunde District, Foshan City, Guangdong Province, China (Address) Declare under our own responsibility that the below product, the USB port of mobile phone just for charging only. Bluetooth Headset ♣ Model No.: JY-BT253B, JY-BT253A, JY-BT253, JY-BT289, JY-BT261, JY-BT9933, JY-BT862, JY-BT863, JY-BT232A, JY-BT232B, JY-BT232C, JY-BT233A, JY-BT233B, JY-BT233C, JY-BT236, JY-BT256, JY-BT288, JY-BT01, JY-BT02, JY-BT03, JY-BT04, JY-BT05, JY-BT06, JY-BT07, JY-BT08, JY-BT09, JY-BT301, JY-BT302, JY-BT303, JY-BT304, JY-BT305, JY-BT306, JY-BT307, JY-BT308, JY-BT309, JY-BT310, JY-BT311, JY-BT312, JY-BT313, JY-BT314, JY-BT315, JY-BT316, JY-BT317, JY-BT318, JY-BT319, JY-BT320, JY-BT321, JY-BT322, JY-BT323, JY-BT324, JY-BT325, JY-BT326, JY-BT327, JY-BT328, JY-BT329, JY-BT330, JY-BT331, JY-BT332, JY-BT333, JY-BT335, JY-BT336, JY-BT337, JY-BT338, JY-BT339, JY-BT340, JY-BT341, JY-BT342, JY-BT343, JY-BT344, JY-BT345, JY-BT346, JY-BT347, JY-BT348, JY-BT349, JY-BT350, JY-BT351, JY-BT352, JY-BT353, JY-BT354, JY-BT355, JY-BT356, JY-BT357, JY-BT358, JY-BT359, JY-BT360, JY-BT361, JY-BT362, JY-BT363, JY-BT364, JY-BT365, JY-BT366, JY-BT367, JY-BT368, JY-BT369, JY-BT370, JY-BT371, JY-BT372, JY-BT373, JY-BT374, JY-BT375, JY-BT376, JY-BT377, JY-BT378, JY-BT379, JY-BT380, JY-BT381, JY-BT382, JY-BT383, JY-BT384, JY-BT385, JY-BT386, JY-BT387, JY-BT388, JY-BT389, JY-BT390, JY-BT391, JY-BT392, JY-BT393, JY-BT394, JY-BT395, JY-BT396, JY-BT397, JY-BT398, JY-BT399, HPA88BKMBT, CHBT08, HPA88BT Foshan, 2013-09-29 Li Qiang (Place, date)

External Photos

Internal Photos For type 1: Assembled by manual For type 2: Assembled by PC BT Module Antenna and distance

SGS-CSTC Standards Technical Services Co., Ltd. Application No..: GZEM1306002488RF Page: 1 of 1 FCC ID: 2AANDBT253B This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. RF Exposure Compliance Requirement The product belongs to standalone portable device base the FCC rule part 2.1091&2.1093. The transmission frequencies of the device are between 100 MHz and 6 GHz. The worst case test separation distance is 5mm. The Max Conducted Output Power and SAR Test Exclusion Threshold (mW) are listed below: The normal condition is the maximum conducted output power as follow: Transmit frequency (GHz) Max Conducted Output Power (mW) SAR Test Exclusion Threshold (mW) 2.402 2.12 9.7 2.441 1.93 9.6 2.480 1.73 9.5 The SAR Test Exclusion Threshold for 100 MHz to 6 GHz is calculated from: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. According to SAR Exclusion Threshold in KDB 447498 (D01) General RF Exposure Guidance v05, the SAR report is not required.

SGS-CSTC Standards Technical Services Co., Ltd. 198 Kezhu Road, Scientech Park, Guangzhou Economic & Technological Development District, G uangzhou, China 510663 Telephone: +86 (0) 20 82155555 Fax: +86 (0) 20 82075059 Email: [email protected] Report No.: GZEM130600248801 Page: 1 of 73 FCC ID: 2AANDBT253B Authorized Signature: Richard Li Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only 1 Cover Page TEST REPORT Application No.: GZEM1306002488RF Applicant: JUN YE ELECTRONIC COMPANY LTD OF SHUNDE FOSHAN CITY FCC ID: 2AANDBT253B Product Name: Bluetooth headset Product Description: Bluetooth headset with 2.4 GHz as carrier Model No.: JY-BT253B ♣ Additional Model No. please refer to section 3 of this report for details. Standards: 47 CFR PART 15 Subpart C: 2012 section 15.247 Date of Receipt: 2013-07-01 Date of Test: 2013-07-18 to 2013-09-18 Date of Issue: 2013-09-18 Test Result : Pass* * In the configuration tested, the EUT detailed in this report complied with the standards specified above. Please refer to section 3 of this report for further detail. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM130600248801 Page: 2 of 73 FCC ID: 2AANDBT253B This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 2 Version Revision Record Version Chapter Date Modifier Remark 00 2013-09-18 Original Authorized for issue by: Tested By 2013-07-18 to 2013-09-18 (Storm Shu) /Signature Date Prepared By 2013-09-18 (Dorrit Chen) /Signature Date Checked By 2013-09-18 (Jeffrey Chen) /Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Report No.: GZEM130600248801 Page: 3 of 73 FCC ID: 2AANDBT253B This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 3 Test Summary Test Test Requirement Test method Result Antenna Requirement FCC PART 15 C section 15.247 (c) and Section 15.203 FCC PART 15 C section 15.247 (c) and Section 15.203 PASS Occupied Bandwidth FCC PART 1…

Text truncated - open the document above for the full version.

Test Setup Photos Radiated Spurious Emission Test Setup 30 MHz to 1 GHz: Above 1 GHz: Conducted Emission Test Setup