2AAPLSP3048IIWAVE MODE BT SPEAKER

SP3048 Wireless Speaker Instruction M anual (Read before proceeding) Power: Works on internal rechargeable Lithium battery. Please charge your speaker fully before first use. To charge the battery : Using a Micro USB cable (included), insert the jack into ”Charging” jack located at the back of the unit and then plug the USB connecter into the USB port on a computer for charging. A red light aside will indicate the charging situation. When battery is full, the red light will turn off automatically. Bluetooth Speaker Operation Turn on the unit by pushing the switch at the back. A Blue light aside will start blinking to indicate the speaker is in paring mode and searching for your Bluetooth mobile device. Bluetooth speaker device name is “Case Logic Spkr”, connect it via the option menu of your mobile device, pairing mode is 0000 if any is required. The Blue light will begin to flash slowly after pair is complete. Start playing music on your device. Keep your device within 33feet (10m) of your speaker. Adjust the volume of your device to a comfortable level. Turn off the unit when not in used. Universal Speaker Operation For other music devices without Bluetooth, use the attached audio input cable. Insert the 3.5 mm jacks into the “Aux-in” jack and into the earphone jack on your device. Turn on the unit and start playing music. Turn off the unit when not in used. Caution: This is not a toy. Please keep away from small children. Please keep away from water / heat. Low power may cause poor connection even no working of Bluetooth. Do not over charge the battery. FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  -- Reorient or relocate the receiving antenna.  -- Increase the separation between the equipment and receiver.  -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  -- Consult the dealer or an experienced radio/TV technician for help  This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation

< Sure Wave (HongKong) Limited > Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2015.07.21 Subject; Request for Confidentiality FCC ID: 2AAPLSP3048 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure indefinitely. • Schematic Diagram • Block Diagram • Operational Description Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Emma Lee Title: Senior Sales Executive Email: [email protected]

Sure Wave (HongKong) Limited Letter of Authorization Company: Sure Wave (HongKong) Limited Address: A-703, Building 2, Tianan Cyber Park, HuangGe North Road, LongGang District, Shenzhen 518172, P.R. China Product Name: IIWAVE MODE BT SPEAKER Model Number: SP3048, CQL1491-B, CQL1492-B We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, CA 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. This shall include the following: • Testing • Approval applications (includes complete product documentation package, including Confidential information) and procedures • Payment of approval fees We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, CA 94566, USA, is allowed to forward all information related to the approval project to the applied notified body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Emma Lee Date: 2015.07.21 Title: Senior Sales Executive Signature of applicant:

Page 1 of 4 Appendix B: Photographs of EUT Model: SP3048 External Photos Page 2 of 4

Page 3 of 4 Model: SP3048 Internal Photos Page 4 of 4

Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com TEST REPORT FCC ID: 2AAPLSP3048 Product: IIWAVE MODE BT SPEAKER Model No.: SP3048 Additional Model: CQL1491-B, CQL1492-B Trade Mark: N/A Report No.: TCT150713E004 Issued Date: July 23, 2015 Issued for : Sure Wave (HongKong) Limited A-703, Building 2, Tianan Cyber Park, HuangGe North Road, LongGang District, Shenzhen 518172, P.R. China. Issued By: Shenzhen Tongce Testing Lab. 1F, Leinuo Watch Building, Fuyong Town, Baoan Dist, Shenzhen, China TEL: +86-755-27673339 FAX: +86-755-27673332 Note: This report shall not be reproduced except in full, without the written approval of Shenzhen Tongce Testing Lab. This document may be altered or revised by Shenzhen Tongce Testing Lab. personnel only, and shall be noted in the revision section of the document. The test results in the report only apply to the tested sample. Report No.: TCT150713E004 Page 2 of 44 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com TABLE OF CONTENTS 1. Test Certification....................................................................................... 3 2. Test Result Summary ............................................................................... 4 3. EUT Description ........................................................................................ 5 4. Genera Information ................................................................................... 6 4.1. Test environment and mode ................................................................................. 6 4.2. Description of Support Units ................................................................................ 6 5. Facilities and Accreditations ................................................................... 7 5.1. Facilities ................................................................................................................. 7 5.2. Location ................................................................................................................. 7 5.3. Measurement Uncertainty ..................................................................................... 7 6. Test Results and Measurement Data ...................................................... 8 6.1. Antenna requirement ............................................................................................ 8 6.2. Conducted Emission ............................................................................................. 9 6.3. Conducted Output Power ................................................................................... 13 6.4. 20dB Occupy Bandwidth .................................................................................... 17 6.5. Carrier Frequencies Separation ......................................................................... 21 6.6. Hopping Channel Number .................................................................................. 25 6.7. Dwell Time ............................................................................................................ 28 6.8. Pseudorandom Frequency Hopping Sequence ................................................ 30 6.9. Conducted Band Edge Measurement ................................................................ 31 6.10. Conducted Spurious Emission Measurement ................................................. 34 6.11.Radiated Spurious Emission Measurement ..................................................... 37 Appendix A: Photographs of Test Setup Appendix B: Photographs of EUT Report No.: TCT150713E004 Page 3 of 44 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com 1. Test Certification Product: IIWAVE MODE BT SPEAKER Model No.: SP3048 Additional Model: CQL1491-B, CQL1492-B Applicant: Sure Wave (HongKong) Limited Address: A-703, Building 2, Tianan Cyber Park, HuangGe North Road, LongGang District, Shenzhen 518172, P.R. China. Manufacturer: Sure Wave (HongKong) Limited Address: 703, Building 2, TianAn Cyber Park, HuangGe North Road, LongGang District, Shenzhen Date of Test: July 13 – July 21, 2015 Applicable Standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 The above equipment has been tested by Shenzhen Tongce Testing Lab. and found compliance with the requirements set forth in the technical standards mentioned above. The results of testing in this report apply only to the product/system, which was tested. Other similar equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. Tested By: Date:July 21, 2015 Leon Chen Reviewed By: Date:July 22, 2015 Joe Zhou Approved By: Date:July 23, 2015 Tomsin Report No.: TCT150713E004 Page 4 of 44 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com 2. Test Result Summary Requirement CFR 47 Section Result Antenna Requirement §15.203/§15.247 (c) PASS AC Power Line Conducted Emission §15.207 PASS Conducted Peak Output Power §15.247 (b)(1) PASS 20dB Occupied Bandwidth §15.247 (a)(1) PASS Carrier Frequencies Separation §15.247 (a)(1) PASS Hopping Channel Number §15.247 (a)(1) PASS Dwell Time §15.247 (a)(1) PASS Radiated Emission §15.205/§15.209 PASS Band Edge §15.247(d) PASS Note: 1. PASS: Test item meets the requirement. 2. Fail: Test item does not meet the requirement. 3. N/A: Test case does not apply to the test object. 4. The test result judgment is decided by the limit of test standard. Report No.: TCT150713E004 Page 5 of 44 Hotline: 400-6611-140 Tel: 86-755-27673339 Fax: 86-755-27673332 http://www.tct-lab.com 3. EUT Description Product Name: IIWAVE MODE BT SPEAKER Model : SP3048 Additional Model: CQL1491-B, CQL1492-B Trade Mark: N/A BT Version: 2.1 + EDR Hardware version: V1.0 Software version: V1.0 Serial Number: 20150713 Operation Frequency: 2402MHz~2480MHz Transfer Rate: 1/2 Mbits/s Number of Channel: 79 Modulation Type: GFSK, π/4-DQPSK Modulation Technology: FHSS …

Text truncated - open the document above for the full version.

Page 1 of 2 Appendix A: Photographs of Test Setup Radiated Emission Page 2 of 2 Conducted Emission