2AAWE-SCL03SYNC WIRELESS CHARGING ALARM CLOCK

Soul Electronics Limited Declaration Letter Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 7/27/2021 FCC ID: 2AAWE-SCL03 Pursuant to KDB 680106 of the Soul Electronics Limited. hereby declare our product which is an inductive wireless power transfer applications that meet all of the following requirements are not required to submit a KDB inquiry for devices approved usinga PAG for equipment approved using certification to address RF exposure compliance. 1) Power transfer frequency is 0.111-0.205MHz which is less than1 MHz 2) Output power from each primary coil is equal to 15 watts max 3) The transfer system includes only single primary coils. 4) Client device is placed directly in contact with the transmitter 5) The EUT is a mobile device. 6) The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Yours sincerely, Soul Electronics Limited Contact person: Ken Chung

Soul Electronics Limited Agent Authorization Company: Soul Electronics Limited Address: Suite 2108, Exchange Tower, 33 Wang Chiu Road, Kowloon Bay, Hong Kong, China Product Name: SYNC WIRELESS CHARGING ALARM CLOCK Model Number(s): SCL03 Product Description: SYNC WIRELESS CHARGING ALARM CLOCK We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2021-07-27 Name: Ken Chung Company: Soul Electronics Limited

External Photos EXTERNAL VIEW-1 OF EUT EXTERNAL VIEW-2 OF EUT EXTERNAL VIEW-3 OF EUT EXTERNAL VIEW-4 OF EUT EXTERNAL VIEW-5 OF EUT EXTERNAL VIEW-6 OF EUT PORT VIEW OF EUT

FCC ID Label Location 40mm&50mm FCC ID: 2AAWE-SCL03

Internal Photos INTERNAL VIEW-1 OF EUT INTERNAL VIEW-2 OF EUT INTERNAL VIEW-3 OF EUT INTERNAL VIEW-4 OF EUT INTERNAL VIEW-5 OF EUT INTERNAL VIEW-6 OF EUT Antenna INTERNAL VIEW-7 OF EUT INTERNAL VIEW-8 OF EUT

Page 1 of 14 RF Exposure Report Report No.: AGC03946210604FH03 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : SYNC WIRELESS CHARGING ALARM CLOCK BRAND NAME : SYNCLABCO MODEL NAME : SCL03 APPLICANT : Soul Electronics Limited DATE OF ISSUE : Jul. 19, 2021 STANDARD(S) : KDB680106 D01 RF Exposure Wireless Charging Base App v03r01 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC03946210604FH03 Page 2 of 14 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jul. 19, 2021 Valid Initial Release Report No.: AGC03946210604FH03 Page 3 of 14 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY .................................................................................................................. 4 2. GENERAL INFORMATION .............................................................................................................................. 5 2.1. PRODUCT DESCRIPTION ........................................................................................................................ 5 3. DESCRIPTION OF TEST MODES ................................................................................................................... 6 4. SYSTEM TEST CONFIGURATION .................................................................................................................. 6 5. TEST FACILITY ................................................................................................................................................ 7 6. RADIO FREQUENCY (RF) EXPOSURE TEST ............................................................................................... 8 6.1. LIMITS ........................................................................................................................................................ 8 6.2. TEST SETUP.............................................................................................................................................. 8 APPENDIX A: PHOTOGRAPHS OF TEST SETUP .......................................................................................... 11 Report No.: AGC03946210604FH03 Page 4 of 14 1. VERIFICATION OF CONFORMITY Applicant Soul Electronics Limited Address Suite 2108, Exchange Tower, 33 Wang Chiu Road, Kowloon Bay, Hong Kong, China Manufacturer Soul Electronics Limited Address Suite 2108, Exchange Tower, 33 Wang Chiu Road, Kowloon Bay, Hong Kong, China Factory Soul Electronics Limited Address Suite 2108, Exchange Tower, 33 Wang Chiu Road, Kowloon Bay, Hong Kong, China Product Designation SYNC WIRELESS CHARGING ALARM CLOCK Brand Name SYNCLABCO Test Model: SCL03 Date of test Jul. 02, 2021 to Jul. 19, 2021 Deviation No any deviation from the test method Condition of Test Sample Normal Report Template AGCRT-US-BR/RF We hereby certify that: The above equipment was tested by Attestation of Global Compliance (Shenzhen) Co., Ltd. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in KDB680106 D01. The results of testing in this report apply to the product/system which was tested only. Prepared By Kelly Cheng (Project Engineer) Jul. 19, 2021 Reviewed By Max Zhang (Reviewer) Jul. 19, 2021 Approved By Forrest Lei (Authorized Officer) Jul. 19, 2021 Report No.: AGC03946210604FH03 Page 5 of 14 2. GENERAL INFORMATION 2.1. PRODUCT DESCRIPTION A major technical description of EUT is described as following Operation Frequency 111-205kHz Test Frequency 129.3KHz Maximum field strength 53.76dBuV/m(PK)@3m Number of channels 1 Antenna Designation Coil Antenna (Met 15.203 Antenna requirement) Hardware Version WZ-2278-V2 Software Version WZ-2278-V4 Power Supply DC 5V-3A , DC 9V-2A(Powered by USB) DC 3V (Powered by battery) Wireless charger 5W/ 7.5W/ 10W/ 15W (max) Report No.: AGC03946210604FH03 Page 6 of 14 3. DESCRIPTION OF TEST MODES NO. TEST MODE DESCRIPTION 1 Wireless charging Mode(Full load) 2 Wireless charging Mode(Half load) 3 Wireless charging Mode(Null load) 4 Wireless charging Mode+ USB 5V/1A Note: 1. The mode 4 was the worst case and only the data of the worst case record in this report. 4. SYSTEM TEST CONFIGURATION Item Equipment Model No. ID or Specification Remark 1 SYNC WIRELESS CHARGING ALARM CLOCK SCL03 2AAWE-SCL03 EUT 2 Wireless Load N/A 15W AE 3 Adapter AD651 N/A AE Report No.: AGC03946210604FH03 Page 7 of 14 5. TEST FACILITY TEST EQUIPMENT LIST Description Manufacturer Model S/N Cal. Date Cal. Due Broadband Field Meter Narda Safety Test Solutions GmbH ELT-400 J-0004 Jun. 09, 2021 Jun. 08, 2022 Probe FHP Narda Safety Test Solutions GmbH 2300/90.10 J-0015 Jun. 09, 2021 Jun. 08, 2022 TestSite Attestation of Global Compliance(Shenzhen) Co., Ltd Location 1-2/F,Building19,JunfengIndustrialPark,ChongqingRoad,HepingCommunity,FuhaiSt reet,Bao'anDistrict,Shenzhen,Guangdong,China Designation Number CN1259 FCC Test Firm Registration Number 975832 A2LA Cert. No. 5054.02 Description Attestation of Global Compliance(Shenzhen) Co., Ltd is accredited by A2LA Report No.: AGC03946210604FH03 Page 8 of 14 6. RADIO FREQUEN CY(RF) EXPOSURETEST 6.1. LIMITS For devices designed for typical desktop applications, such a wireless charging pads, RF exposure evaluation should be conducted assuming a user separation distance of 15 cm. E and H field strength measurements or numerical modeling may be used to demonstrate compliance. Measurements should be made from all sides and the top of the primary/client pair, with the 15 cm measured from the center of the probe(s) to the edge of the device. Emissions between 100 kHz to 300 kHz should be assessed versus the limits at 300 kHz in Table 1 of Section 1.1310: 614 V/m and 1.63 A/m. 6.2. TEST SETUP Note: Position A: Front of EUT; Position B: Left of EUT; Position C: back of EUT; Position D: Right of EUT; Position E: Top of EUT(20 cm measure distance); Report No.: AGC03946210604FH03 Page 9 of 14 6.3. TEST PROCEDURE …

Text truncated - open the document above for the full version.

Page 1 of 31 FCC Test Report Report No.: AGC03946210604FE04 FCC ID : 2AAWE-SCL03 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : SYNC WIRELESS CHARGING ALARM CLOCK BRAND NAME : SYNCLABCO MODEL NAME : SCL03 APPLICANT : Soul Electronics Limited DATE OF ISSUE : Jul. 19, 2021 STANDARD(S) TEST PROCEDURE(S) : FCC Part 15 Rules REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC03946210604FE04 Page 2 of 31 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jul. 19, 2021 Valid Initial Release Report No.: AGC03946210604FE04 Page 3 of 31 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY ................................................................................................................................ 4 2. GENERAL INFORMATION ............................................................................................................................................. 5 2.1. PRODUCT DESCRIPTION ....................................................................................................................................................... 5 3. MEASUREMENT UNCERTAINTY ................................................................................................................................. 6 4. DESCRIPTION OF TEST MODES ................................................................................................................................. 7 5. SYSTEM TEST CONFIGURATION ................................................................................................................................ 8 5.1. CONFIGURATION OF EUT SYSTEM ........................................................................................................................................ 8 5.2. EQUIPMENT USED IN EUT SYSTEM ...................................................................................................................................... 8 5.3. SUMMARY OF TEST RESULTS ................................................................................................................................................ 8 6. TEST FACILITY ............................................................................................................................................................... 9 7. RADIATED EMISSION .................................................................................................................................................. 10 7.1TEST LIMIT ........................................................................................................................................................................... 10 7.2. MEASUREMENT PROCEDURE ............................................................................................................................................ 11 7.3. TEST SETUP ........................................................................................................................................................................ 12 7.4. TEST RESULT ....................................................................................................................................................................... 13 8. 20DB BANDWIDTH ....................................................................................................................................................... 16 8.1. MEASUREMENT PROCEDURE ............................................................................................................................................ 16 8.2. TEST SET-UP (BLOCK DIAGRAM OF CONFIGURATION) ........................................................................................................ 16 8.3. MEASUREMENT RESULTS ................................................................................................................................................... 17 9. FCC LINE CONDUCTED EMISSION TEST ................................................................................................................ 18 9.1. LIMITS OF LINE CONDUCTED EMISSION TEST..................................................................................................................... 18 9.2. BLOCK DIAGRAM OF LINE CONDUCTED EMISSION TEST .................................................................................................... 18 9.3. PRELIMINARY PROCEDURE OF LINE CONDUCTED EMISSION TEST ..................................................................................... 19 9.4. FINAL PROCEDURE OF LINE CONDUCTED EMISSION TEST ................................................................................................. 19 9.5. TEST RESULT OF LINE CONDUCTED EMISSION TEST ........................................................................................................... 20 APPENDIX A: PHOTOGRAPHS OF TEST SETUP ........................................................................................................ 22 APPENDIX B: PHOTOGRAPHS OF EUT ....................................................................................................................... 24 Report No.: AGC03946210604FE04 Page 4 of 31 1. VERIFICATION OF CONFORMITY Applicant Soul Electronics Limited Address Suite 2108, Exchange Tower, 33 Wang Chiu Road, Kowloon Bay, Hong Kong, China Manufacturer Soul Electronics Limited Address Suite 2108, Exchange Tower, 33 Wang Chiu Road, Kowloon Bay, Hong Kong, China Factory Soul Electronics Limited Address Suite 2108, Exchange Tower, 33 Wang Chiu Road, Kowloon Bay, Hong Kong, China Product Designation SYNC WIRELESS CHARGING ALARM CLOCK Brand Name SYNCLABCO Test Model SCL03 Date of test Jul. 02, 2021 to Jul. 19, 2021 Deviation No any deviation from the test method Condition of Test Sample Normal Test Result Pass Report Template AGCRT-US-BR/RF We hereby certify that: The above equipment was tested by Attestation of Global Compliance (Shenzhen) Co., Ltd. The test data, data evaluation, test proced…

Text truncated - open the document above for the full version.

Test Setup Photos FCC RADIATED EMISSION TEST SETUP 9kHz-30MHZ FCC RADIATED EMISSION TEST SETUP 30MHz-1GHZ FCC LINE CONDUCTED EMISSION TEST SETUP