2AAWE-SE63EMOTION PRO

FCC Statement： Th is device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Th is equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures: -Reo rient the receiving antenna. -In crease the separation between the equipment and receiver. -Co nnect the equipment into and outlet on a circuit different from that to which the receiver is connected. -Cons ult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

DATE: 2021.08.11 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appointBLUEASIA OF TECHNICAL SERVICES (SHENZHEN) CO., LTD. Build in C No. 107 Shihuan Road Shi an Sub-District Baoan District Shenzhen GuanqDonq, 518000 P.R.C(Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Soul Electronics Limited Suite 2108,Exchange Tower, 33Wang Chiu Road, Kowloon Bay,Hong Kong,China(Applicant Name and address) <Signature> NameKen Chung TitleVP of Engineering Applicant CompanySoulElectronicsLimited

DATE 2021.08.11 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID:2AAWE-SE63 Product Name: EMOTION PRO Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...) Schematics Block diagram Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. <Signature> Name Ken Chung Title VP of Engineering Company Soul Electronics Limited

Model No.: SE63

SE63 Input:5V/0.5A Output:5V/200mA Capacity:3.7V/500mAh/1.85Wh FCC ID:2AAWE-SE63H630BK210800001XY SE63 Input:5V/0.5A Output:5V/200mA Capacity:3.7V/500mAh/1.85Wh FCC ID:2AAWE-SE63H630BK210800001XY

Model No.: SE63

RF Exposure Evaluation Statement Product Name: EMOTION PRO Model No.：SE63 FCC ID：2AAWE-SE63 1.1 RF Exposure Compliance Requirement 1.1.1 Standard Requirement According to KDB447498D01 General RF Exposure Guidance v06 Standalone SAR test exclusion considerations Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Exclusion Threshold condition, listed below, is satisfied. 1.1.2 Limits The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation 17 The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion 1.1.3 EUT RF Exposure Operational Mode: EDR （8-DPSK worst case） Channel Maximum Peak Conducted Output Power (dBm) Tune up tolerance (dB) Maximum tune-up Power Calculated value Exclusion threshold (dBm) (mW) 2402MHZ -4.96 ±1 -3.96 0.40 0.12 3.0 2441MHz -3.99 ±1 -2.99 0.50 0.16 2480MHz -2.19 ±1 -1.19 0.76 0.24 Conclusion: the calculated value ≤3.0, SAR is exempted.

Page 1 of97 BlueAsia of Technical Services(Shenzhen) Co., Ltd. Add: Building C, No. 107, Shihuan Road, Shiyan Sub-District, Baoan District, Shenzhen, Guangdong Province, China Tel: +86-755-23059481 Email: [email protected] www.cblueasia.com TEST REPORT Product Name : EMOTION PRO Brand Mark : SOUL Model No. : SE63 FCC ID : 2AAWE-SE63 Report Number : BLA-EMC-202106-A8102 Date of Sample Receipt : 2021/6/25 Date of Test : 2021/6/25 to 2021/7/7 Date of Issue : 2021/7/7 Test Standard : 47 CFR Part 15, Subpart C 15.247 Test Result : Pass Prepared for: Soul Electronics Limited Suite 2108, Exchange Tower, 33 Wang Chiu Road, Kowloon Bay, Hong Kong, China Prepared by: BlueAsia of Technical Services(Shenzhen) Co.,Ltd. Building C, No. 107, Shihuan Road, Shiyan Sub-District, Baoan District, Shenzhen, Guangdong Province, China TEL: +86-755-23059481 Compiled by: Review by: Approved by: Date: 2021/7/7 Report No.: BLA-EMC-202106-A8102 Page 2 of97 BlueAsia of Technical Services(Shenzhen) Co., Ltd. Tel: +86-755-23059481 Email: [email protected] www.cblueasia.com REPORT REVISE RECORD Version No. Date Description 00 2021/7/7 Original Report No.: BLA-EMC-202106-A8102 Page 3 of97 BlueAsia of Technical Services(Shenzhen) Co., Ltd. Tel: +86-755-23059481 Email: [email protected] www.cblueasia.com TABLE OF CONTENTS 1 TEST SUMMARY ........................................................................................................................................6 2 GENERAL INFORMATION .........................................................................................................................7 3 GENERAL DESCRIPTION OF E.U.T. .........................................................................................................7 4 TEST ENVIRONMENT ................................................................................................................................8 5 TEST MODE ................................................................................................................................................8 6 MEASUREMENT UNCERTAINTY ..............................................................................................................8 7 DESCRIPTION OF SUPPORT UNIT...........................................................................................................9 8 LABORATORY LOCATION .........................................................................................................................9 9 TEST INSTRUMENTS LIST ..................................................................................................................... 10 10 ANTENNA REQUIREMENT ..................................................................................................................... 14 10.1 CONCLUSION ....................................................................................................................................................... 14 11 CONDUCTED SPURIOUS EMISSIONS .................................................................................................. 15 11.1 LIMITS .............................................................................................................................................................. 15 11.2 BLOCK DIAGRAM OF TEST SETUP ..................................................................................................................... 15 11.3 TEST DATA .......................................................................................................................................................... 16 12 CONDUCTED PEAK OUTPUT POWER ................................................................................................. 17 12.1 LIMITS .............................................................................................................................................................. 17 12.2 BLOCK DIAGRAM OF TEST SETUP ..................................................................................................................... 17 12.3 TEST DATA .......................................................................................................................................................... 18 13 CONDUCTED EMISSIONS AT AC POWER LINE (150KHZ-30MHZ)..................................................... 19 13.1 LIMITS .............................................................................................................................................................. 19 13.2 BLOCK DIAGRAM OF TEST SETUP ..................................................................................................................... 19 13.3 PROCEDURE ..................................................................................................................................................... 19 13.4 TEST DATA .......................................................................................................................................................... 21 14 RADIATED SPURIOUS EMISSIONS ....................................................................................................... 23 14.1 LIMITS .............................................................................................................................................................. 23 14.2 BLOCK DIAGRAM OF TEST SETUP ..................................................................................................................... 24 14.3 PROCEDURE ..................................................................................................................................................... 24 14.4 TEST DATA .......................................................................................................................................................... 26 Report No.: BLA-EMC-202106-A8102 Page 4 of97 BlueAsia of Technical Services(Shenzhen) Co., Ltd. Tel: +86-755-23059481 Email: [email protected] www.cblueasia.com 15 RADIATED EMISSIONS WHIC…

Text truncated - open the document above for the full version.

Model No.: SE63